This modifies to the postmarketOS ramdisk init to use the new pbsplash
tool for displaying splash messages, replacing the old fbsplash.
This also moves the show_splash call to run as soon as possible rather
than waiting for mount_subpartitions to run (which can take a while).
Closes https://gitlab.com/postmarketOS/pmaports/-/issues/1936
Additionally, this means that iio-sensor-proxy actually gets enabled
on GNOME and GNOME mobile. Previously, it would get installed there
but not enabled unless the user manually did it.
Otherwise we don't have any document viewer installed by default.
[ci:skip-vercheck]: pkgrel bump is not necessary when changing
recommends.
[ci:skip-build]: already built successfully in CI
Add easy support for pulseaudio bluetooth like we have for pipewire
bluetooth.
Will update docs when this is merged.
[ci:skip-build]: already built successfully in CI
xdg-desktop-portal-gnome is needed for example for mime type associations.
Without it, the default gnome based shell installations couldn't detect which
mime types were provided by which applications, xdg-open and the
Default Applications tab in GNOME Control Center didn't work.
This dependency was missing from postmarketos-ui-phosh, so let's add it
and xdg-user-dirs to postmarketos-base-ui-gnome to make sure it's not repeated
in every gnome based UI.
Explicitly depend on the version that allowed mounting with UUIDs, so we
can soon set this explicit dependency for devices that now make use of
this feature.
Dependency chain:
device package
-> postmarketos-base
-> postmarketos-mkinitfs
-> boot-deploy
Related: discussion in MR 3791
mDNS queries and replies are sent to port 5353.
Update firewall rule in order to make it as tight as possible.
[ci:skip-build]: already built successfully in CI
This installs zram-init and sets it to start on boot for all
devices/UIs. The included conf.d/zram-init also allows diabling using
zram swap or overriding the size by using a deviceinfo var.
I did an analysis of the pmos base install size with the 'none' UI
selected, after depending on zram-init, and the following new package is
installed:
zram-init-11.1-r1 installed size: 40 KiB
These packages are dependencies of zram-init, however they are already
installed in the base image (with 'none' UI) so they are not counted
above:
util-linux-misc-2.38.1-r0 installed size: 6816 KiB
e2fsprogs-extra-1.46.5-r4 installed size: 1324 KiB
So this seems like a very small price to pay for the benefit of not
making the logic/implementation more complicated than this.
* Starting busybox syslog ... [ ok ]
ssh-keygen: generating new host keys: RSA ECDSA ED25519
* Starting sshd ... [ ok ]
zram swap: activating with size: 243 MB
* Loading zram module...
[ ok ]
* Swap->zram0
[ ok ]
* Starting local ... [ ok ]
This change introduces one new deviceinfo variable:
deviceinfo_zram_swap_pct: percentage of RAM to use for zram swap
Default percentages if the second var is unset are explained in the
zram-init file this commit adds. A value of 0 disables zram swap.
fixes#1133
This moves unl0kr and all of its dependencies into the initramfs-extra,
it does so by using a relatively new mkinitfs feature for installing
files into the -extra archive.
[ci:skip-build] already built successfully in CI
By positioning this after extracting the initramfs-extra archive, we can
allow udev to exist in the -extra archive and not have any size impact
on the base initramfs archive.
Any hook that needs udev in the initramfs can get that support, provided
that the hook lists udev requirements in the .files config for it.
* lock.sh is specific to Nokia N900, so move to device-nokia-n900
* use tinydm instead of lightdm
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
[ci:skip-build]: already built successfully in CI
Move some dependencies from plasma-desktop to the -extras subpackage, so
they don't get installed by default:
* audiocd-kio (2 MiB): using a CD drive with postmarketOS seems to be a
very rare combination
* kolourpaint (3 MiB): very basic image editor with featureset of MS
paint, I don't think it's that useful in a default install. Users
looking for an image editor may want to use e.g. krita instead and can
install whatever they want to use after the default install is done.
* kwrite (20 MiB): another text editor, kate (3 MiB), is already getting
installed by default
* okular (81 MiB): quite big, and pdfs can also be viewed in firefox
which we install by default
* mesa-demos (50 MiB): rather big for just being some graphical demos
It's always a good idea to keep the install image small, but in this
instance the change was prompted because we currently hit a size limit
when generating install images. In particular, when generating the
v22.12 image for the pinebookpro. The process for generating install
images is not optimized for size (see bpo issue 116) and this should be
improved, but in the meantime let's just reduce the install size with
this patch on edge and backport it to v22.12 so building this image
doesn't fail anymore.
Sizes listed above are for aarch64 and include dependencies that get
removed together with removing the package.
Users can switch to pulseaudio with:
doas apk add sxmo-audio-common-pulse
We can make the poco f1 device APKBUILD depend on
sxmo-common-audio-pulse. This allows you to install pulseaudio on Sxmo
which was the reason Joel said the poco f1 was having issues with call
audio: https://gitlab.com/postmarketOS/pmaports/-/issues/1821
After installing pulseaudio with this patch, the other side still
cannot hear me. I am posting this work so that others can just run
pulseaudio on sxmo and find out what's causing this bug.
Note by ollieparanoid: while it doesn't fix the bug completely, it seems
it's required to make calling work again, something we definitively want
to have in v22.12 so I'm merging this now. Also the sxmo-utils patch was
merged to sxmo-utils upstream, but isn't in alpine yet. Adding this
package (previous patch) temporarily makes sense.
Co-developed-by: Oliver Smith <ollieparanoid@postmarketos.org>
[ci:skip-vercheck]: pkg forked from alpine has pkgrel > 0
[ci:skip-build]: already built successfully in CI
This upgrade has no effect on postmarketOS, as there were only systemd
service files added to the repository. The upgrade is done solely to
keep track with the newest version.
[ci:skip-build] already built successfully in CI
Add rules for regulator-haptic, which is used on:
- samsung-e5/e7
- samsung-cprime/gprime
- samsung-j3/j5(x)
Note that regulator-haptic is not supported on some devices yet,
and samsung-e5 is not ported at the moment.
[ci:skip-build]: already built successfully in CI
The variable describes the configfs function name to use, no matter if
it's rndis, ncm, ecm or any other function. So change the name of the
variable, the string we write to the configuration file and some
comments.
Recommend installing:
- fwupd
- Receive firmware updates for supported hardware
The following packages are required to show device information at:
- Settings -> About this System -> Show More Information
Devices
- Firmware Security
- aha
- fwupd
- PCI
- pciutils
Graphics
- OpenGL
- mesa-demos
- Vulkan
- vulkan-tools
- Wayland
- wayland-utils
- X-Server
- xdpyinfo
Change-Id: I8a1eb484720f717f0504418f7c5c6af505b081b6
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build]: already built successfully in CI
flatbuffers should have been available on armv7,
since aports 0f3295fb0660f5caf59b8b2385f7c9305f1d57f0
[ci:skip-vercheck]
[ci:skip-build]: already built successfully in CI
kgx was renamed to gnome-console with the release of version 42.beta, so
let's reflect that in our Phosh UI package.
[ci:skip-vercheck]: pkgrel bump is not necessary when changing
recommends.
Instead of using the uevent helper binary, mdev daemon listens for kernel
events using the netlink interface. Then the requirement of enabling
UEVENT_HELPER for pmOS kernels can be dropped, as it's use is discouraged.
From CONFIG_UEVENT_HELPER kernel config help:
> This should not be used today, because usual systems create many events
> at bootup or device discovery in a very short time frame. One forked
> process per event can create so many processes that it creates a high
> system load, or on smaller systems it is known to create out-of-memory
> situations during bootup.
Support for running mdev as a daemon was added in 2019 with commit [1].
From that same commit:
> Adds the -d option to run mdev in daemon mode handling hotplug events
> from the kernel like udev. If the system generates many hotplug events
> this mode of operation will consume less resources than registering
> mdev as hotplug helper or using the uevent applet.
[1] https://git.busybox.net/busybox/commit/?id=498cec202adbf69a7a72af5e204260682d614183
[ci:skip-build]: already built successfully in CI
Fixes:
- Fix installation with FDE
- Use new path to kpartx (MR 16)
Other:
- pmos_install: Increase boot partition size to 256MB (MR 14)
- pmos_install_functions: make shellcheck happy
- update-binary: make shellcheck happy
[ci:skip-build] already built successfully in CI
There is "iifname "wwan*" drop" defined in 01_wwan.nft, which drops
any not "established, related" incoming packet from WWAN.
[ci:skip-build]: already built successfully in CI
Drop replaces, provides for postmarketos-config-firefox. This was the
name of the package until August of 2020, not relevant anymore. Also
the provides didn't have pkgrel and therefore was wrong.
apk treats provider_priority=0 as if it is not there, not as lowest
value. The previous patch set it to =10 for …-sxmo-de-sway, so set it to
=5 for the dwm version.
Related: c21f61ddd8/src/solver.c (L713-721)
apk ignores a provider_priority of 0. In order to have …-sxmo-de-dwm
have a lower provider priority than …-sxmo-de-sway, set a higher
priority than 1 for the sway version.
Alpine has changed location and package name of ttf-dejavu
fonts, adjust to new location.
Without this, fbkeyboard service crashes with error:
unable to load font file: No such file or directory
Default font path is hardcoded [1] to
"/usr/share/fonts/ttf-dejavu/DejaVuSans.ttf".
Luckily there is a CLI switch to change default, use it.
[1] https://github.com/bakonyiferenc/fbkeyboard/blob/master/fbkeyboard.c#L37
Text Editor is a new modern text editor for GNOME. It is the new
default, replacing gedit upstream. As such, let's do the same here
downstream.
[ci:skip-vercheck]: pkgrel bump is not necessary when changing
recommends.
[ci:skip-build]: already built successfully in CI
- Support for the huawei-g7 display panel in lk1st
- FS based boot is skipped when going to the recovery
- Generate image without appended dtb for lk2nd-msm8226
- Some bug fixes and device improvements
New devices:
- Samsung Galaxy Ace 4 (SM-G357FZ)
- Samsung Galaxy Grand 2 (SM-G7102)
- Samsung Galaxy Grand Max (SM-G720AX)
- Samsung Galaxy Tab 4 10.1 (2014) (SM-T530)
- Huawei Ascend G6 L11 LTE
- Some new variants for the existing Samsung devices
Changelog: https://github.com/msm8916-mainline/lk2nd/releases/tag/0.13.0
This has been out-of-date for almost a year with seemingly stalled
progress on the existing upgrade MR[1] for months now; it really seems
like no one wants to maintain this which currently leaves this
"force-installed-by-default" packaged image broken on all wlroots-based
Wayland compositors for example.
[1] https://gitlab.com/postmarketOS/pmaports/-/merge_requests/3091 ("Draft: main/waydroid-image: upgrade to 17.1.20220419")
At the moment almost all device packages force installation of the Mesa
drivers, even when they are not used by any application (for example on
a minimal headless installation with "none" or "console" UI).
Omitting mesa-dri-gallium from such installations saves about ~150 MiB
of disk space (469 MiB -> 317 MiB rootfs for minimal installation on
arrow-db410c).
The "classic" drivers have been removed from Mesa so only one mesa-dri-
package exists now: mesa-dri-gallium contains all Mesa drivers,
llvmpipe, freedreno, lima, panfrost, Intel (iris/crocus), ...
This means we can easily create an install_if package in
postmarketos-base that installs that driver package only if needed
(= only if another package requires the "mesa" package).
Strictly speaking the install_if could be restricted further since
mesa-dri-gallium is only needed by "mesa-egl", "mesa-gbm" and "mesa-gl"
but not e.g. the Vulkan drivers. Having three postmarketos-base
subpackages (one install_if for each of them) seems a bit
overengineered, though. "mesa" is a common dependency of all three
of them, so using install_if="... mesa" should be good enough.
renamed in aports@ee78772612
this also adds an explicit dependency on the font, since it may not have
been installed if postmarketos-ui-base was installed... (e.g. ui=None)
The xfce4-battery-plugin doesn't need to be installed anymore since we
switched to the "power manager plugin" in postmarketos-ui-xfce4 0.5.0.
The link to the old PostmarketOS icon isn't needed anymore for new
installations.
[ci:skip-build]: already built successfully in CI
This is possible now that all SDL (1) applications use sdl12-compat
instead of "classic" SDL 1.2. Note that this only is applied to user
interfaces that use Wayland and are launched through tinydm.
See https://gitlab.alpinelinux.org/alpine/aports/-/issues/12739
Don't build with !tracedeps, as otherwise the isl dependency is not
properly added to the built gccs. In practice this probably doesn't
matter since we only use these old gccs to build kernels in the native
chroots (not via crossdirect in foreign arch chroots), and we also
install a proper gcc in the native chroot that pulls in the isl
dependency. But fix it for correctness.
Related: pmaports issue 1732
[ci:skip-build] Already built successfuly on CI in MR
We already ship Angelfish and shipping 2 browser takes up a lot of
space. Besides Angelfish feels more native in Plasma Mobile (being baed
on Qt and made for mobile) and has a built-in adblocker nowadays so it
seems like the better option.
urfkill hasn't been used for quite a while, no need to keep it around
Motivation for this change is that the image builds of the UI are
currently running out of space so we need to decrease the image size
Actually package pulseaudio is needed instead of pulseaudio-utils.
Package pulseaudio-utils then gets drawn in by postmarketos-base-ui
sub-package pulseaudio.
For Xfce4 this is a cosmetic change because pulseaudio gets installed
as a dependency of pavucontol already. Keeping pulseaudio in the
_pmb_reccomends list makes sense to be clear which pieces are needed.
For MATE an explicit installation of pulseaudio is needed because it
doesn't use pavucontrol.
[ci:skip-vercheck]
[ci:skip-build]: already built successfully in CI
Since c49d84f4ab1856156d26d59f5c88387776990d24 in Alpine's aports,
the sm.puri.OSK0.desktop service no longer tries to execute
/usr/bin/osk-wayland and instead just executes /usr/bin/squeekboard
directly, thus avoiding this needless indirection. virtboard hasn't
existed in postmarketOS for years at this point and squeekboard is
a hard dependency of phosh, so it's always going to be present
(thus making this check unnecessary) and the fallback if it isn't
wouldn't work anyway.
[ci:skip-build]: already built successfully in CI
At this point the only application preconfigured to be scaled was GNOME
Maps, which nowdays adapts just fine to narrow screens. Having it scaled
like this by default only degrades the user experience by making UI
elements tiny and hard to interact with.
Closes https://gitlab.com/postmarketOS/pmaports/-/issues/1716
This would mitigate issues where apk unexpectedly replaces packages
somewhat as this way the user will be able to see precisely what changes
will happen to their system before they are committed. Furthermore, most
users are likely accustomed to package managers like apt, dnf, pacman,
among others that all are interactive by default and as such this would
provide a more familiar experience for them.
This will not affected pre-existing installs, and advanced users who
do not like this behaviour can restore the old one by deleting
/etc/apk/interactive.
[ci:skip-build]: already built successfully in CI
After PulseAudio support for MATE sound was enabled in Alpine Linux,
its interfaces are now available in the native MATE sound settings.
The additional PulseAudio volume control application therefore became
redundant.
[ci:skip-vercheck]
Don't install the experimental gnome-mobile forks of gnome-shell and
mutter in regular GNOME. These are probably more stable, and most
importantly this prevents accidental uninstallation of gnome-shell
without installing gnome-mobile-shell.
Revert the addition of the gnome-shell dependency to
postmarketos-ui-gnome. This isn't needed anymore and caused further
issues.
Fixes: issue 1701
Since merging the gnome shell on mobile MR 3404, gnome-shell needs to be
explicitly installed or else it gets removed on upgrade.
[ci:skip-build]: already built successfully in CI
It's broken and I currently don't have any interest in fixing it or
maintaining it in general. If somebody wants to package it later they
can always restore it
Previously only cross/gcc{4,6}-* packages were adjusted in MR 3419, but
these packages need to be adjusted as well.
Fix for error shown in upstream_compat check:
Increase 'gcc6' pkgrel (10 -> 11), missing depend(s): isl
Increase 'gcc4' pkgrel (5 -> 6), missing depend(s): isl
Related: pmbootstrap issue 2167
[ci:skip-build] Already built successfully once
Firefox packaging changed upstream, renaming the desktop files. This
caused the mime applications to be stale, so update those.
See also
https://gitlab.alpinelinux.org/alpine/aports/-/issues/13983
[ci:skip-build]: already built successfully in CI
The sole purpose of this subpackage was to work around that Firefox's
.desktop file did not match the GTK app ID. This has been fixed as of
the commit linked below, so drop the subpackage.
See 525736254c
The firefox-esr package in versions >= 102.2.0-r1 installs to
/usr/lib/firefox-esr instead of /usr/lib/firefox, adjust FIREFOX_DIR
to match. Install for both firefox-esr and firefox now.
[ci:skip-build]: already built successfully in CI
Although qt5-qtvirtualkeyboard is used by SDDM, in a Plasma session
itself maliit-keyboard is used instead
[ci:skip-build]: already built successfully in CI
Bootmac configures the MAC addresses of WLAN and Bluetooth interfaces at boot.
Bootmac can be invoked in various ways at boot, but currently only udev rules are tested.
Bootmac generates MAC addresses from the `serialno` provided by Android bootloaders
through /proc/cmdline or from /etc/machine-id. The Organizationally Unique Identifier (OUI)
is retrieved from a lookup database macdb by matching deviceinfo_manufacturer
from /etc/deviceinfo with the entries in the database.
See https://gitlab.com/postmarketOS/bootmac
Bump the pkgrel of gcc4 and gcc6, and regenerate the cross/* versions
with "pmbootstrap aportgen gcc6-armv7" etc.
Should fix these errors:
Error loading shared library libisl.so.22: No such file or directory (needed by /usr/gcc6/libexec/gcc/x86_64-alpine-linux-musl/6.4.0/cc1)
Error relocating /usr/gcc6/libexec/gcc/x86_64-alpine-linux-musl/6.4.0/cc1: isl_union_map_free: symbol not found
Error relocating /usr/gcc6/libexec/gcc/x86_64-alpine-linux-musl/6.4.0/cc1: isl_map_from_pw_aff: symbol not found
Error relocating /usr/gcc6/libexec/gcc/x86_64-alpine-linux-musl/6.4.0/cc1: isl_schedule_from_domain: symbol not found
...
Related: 54749a5222
[ci:skip-build]: already built successfully in CI
Alpine does not use setup-udev anymore and provides the same
functionality through setup-devd. The setup-udev script was deleted [1]
but postmarketos-base still used it and caused pmbootstrap to fail when
building a device image. Use the rc-service setup directly from
setup-devd.
[1] b56c4c2b9d
Adjust UIs that pre-install megapixels (not megapixels-gtk3) to also
recommend using postprocessd. This pulls in opencv, but overall improves
the usability of megapixels a lot so it seems worth installing by
default.
[ci:skip-vercheck]: _pmb_recommends doesn't need a pkgrel bump
dzImage generation tool for Tizen devices. The same dzImage format is
used in all Samsung's Tizen devices (Spreadtrum, Qualcomm, Exynos), so
we pick the latest script from the Tizen's Exynos kernel package.
Prior to this commit, the initramfs was unable to resize the root
partition if it was on a device backed by the device mapper. This commit
fixes that now that it is possible for the root partition to lie on a
device mapper device.
gnome-icon-theme has been dropped in alpine edge in favor of
adwaita-icon-theme. Adjust the _pmb_recommends of the Sxmo UI packages.
Fix for:
package 'gnome-icon-theme' from _pmb_recommends not found for arch 'x86_64'
Related: b24abe8a2c
Related: https://gitlab.com/postmarketOS/pmaports/-/jobs/2593231817
[ci:skip-vercheck]: changing _pmb_recommends doesn't need version bump
While GNOME does require hardware acceleration, GNOME's X11 mode
(not sure about Wayland mode) does work without DRM support, so
it works fine with software rendering on devices without a working
GPU as long as fbdev works.
I think this raises the question of whether we should rename
pmb:hw-accel to pmb:drm as e.g. Phosh should work without 3D
acceleration if a device e.g. uses a kernel with SimpleDRM support,
but that is out of scope for this MR/commit.
Effectively reverts 638362de63
[ci:skip-vercheck]
Fixes 02dfe83c4b
The previous `provides="mkinifs=3.6.0"` was a requirement because alpine's
kernels had a minimum dependency in `mkinitfs>=3.6.0` to make sure that
support for compressed modules existed. That requirement is no longer
in place[1], since the dependency is now on the `initramfs-generator`
virtual package. Also, since `initramfs-generator` is a virtual package
and not a real package, versioning it might mess up APK. The documentation
explictly states that virtual packages are those with unversioned provides
and a provider_priority. So to avoid having problems in the future, let's
strictly stick to it.
[1] 4fac61c826
Alpine provides a 'initramfs-generator' thing now that the alpine
linux-* depend on explicitly. This sets postmarketos-mkinitfs to be the
preferred provider of that virtual package.
Fixes:
ERROR: unable to select packages:
postmarketos-mkinitfs-1.4.1-r5:
conflicts: mkinitfs-3.6.1-r2[mkinitfs=3.6.0]
satisfies: postmarketos-base-20-r1[postmarketos-mkinitfs]
postmarketos-base-nofde-20-r1[postmarketos-mkinitfs]
.pmbootstrap-20220610.215815[postmarketos-mkinitfs]
.pmbootstrap-20220610.215815[mkinitfs]
mkinitfs-3.6.1-r2:
conflicts: postmarketos-mkinitfs-1.4.1-r5
satisfies: .pmbootstrap-20220610.215815[mkinitfs]
linux-rpi-5.15.45-r1[initramfs-generator]
.pmbootstrap-20220610.215815:
masked in: cache
satisfies: world[.pmbootstrap=20220610.215815]
Also see:
30d7b88324 (aports) main/mkinitfs: provide initramfs-generator
4fac61c826 (aports) main/linux-lts: replace mkinitfs with initramfs-generator
There was lately a discussion upstream due to apk 2.12.10 breaking
some packages in aports[1]. The conclusion in IRC is that provides
were designed to be either versioned or have a provider_priority.
Otherwise, the provides will be treated as a "virtual package".
Which is not what we want here.
[1] https://gitlab.alpinelinux.org/alpine/apk-tools/-/issues/10847
The patch was meant well. But there are problems with yelp in its
current form in postmarketOS:
* It's practically empty. In the default install, there is only one
application that has some sort of help text, which is Chatty. But
when you click on the entry, there is only one line of generic
information about the app. Not useful for users.
* Yelp is not adapted for small screens, the one line of help text is
cut off on the PinePhone.
So let's not ship it by default in edge and v22.06 for now.
This reverts commit 5ef50b12f2.
[ci:skip-vercheck]: modifying _pmb_recommends doesn't need a version
bump.
At the moment, mkinitfs loads some file system modules always (ext4),
some dynamically (brtfs) and some not at all (f2fs, vfat), expecting
them to be built-in.
To support generic kernels (e.g. from Alpine) properly, use the
partition type detection for both boot and root partition and always
load the necessary modules before mounting.
An increasing number of devices relies on the vfat file system in the
initfs (e.g. for UEFI boot). Having to add all the modules required for
it to work to deviceinfo_modules_initfs is annoying and inconsistent,
in particular for the additionally chosen "nls" modules. Since we
already bundle several file systems by default, let's just add vfat
as well to simplify this.
Ideally mkinitfs should detect the file systems chosen at install time
in the future and only include the necessary modules, but until then
this just adds a couple of kilobytes to the initramfs.
closes#1515
This patch HAS NOT been tested to see if it actually fixes#1515. I do
not have my pinephone keyboard with me and will not till v22.06 is out.
Can someone please test this patch before merging?
Note: this is being merged upstream but needs a refactor of the
Makefile. See:
https://lists.sr.ht/~mil/sxmo-devel/patches/32630
Since we cannot get the refactor of the Makefile out before the next
release, this is the next best thing
[ci:skip-build] already built successfully in CI.
This replaces the previous `udevadm test` hack with a combination of
`udevd`, `udevadm trigger` and `udevadm settle` in order to coldplug all
available devices and make them available for use via libinput / unl0kr.
Relates to: #1411
[ci:skip-build] already built successfully in CI
We decided against pvr hacks, quoting craftyguy from issue 1316:
> We discussed this in our team meeting, and ultimately decided that
> supporting pvr in pmaports/pmOS has many of the same problems that
> we saw when trying to support hallium/libhybris, something we
> decided against. For much of the same reasons, we've decided that we
> want to avoid adding the proprietary userspace components required to
> support pvr in pmOS.
No device port is using this package anymore, but we forgot to remove
it. After branching v22.06 I realized that it doesn't build anymore
and as stated in MR 2702, it's unmaintained.
Related: https://builds.sr.ht/~postmarketos/job/767700
Fix the build failure when built with newer gcc:
/home/pmos/build/src/gcc-6.4.0/gcc/config/i386/i386.c: In function 'int function_arg_advance_32(CUMULATIVE_ARGS*, machine_mode, const_tree, long int, long int)':
/home/pmos/build/src/gcc-6.4.0/gcc/config/i386/i386.c:8743:18: error: converting to 'bool' from 'std::nullptr_t' requires direct-initialization [-fpermissive]
8743 | bool error_p = NULL;
| ^~~~
Patch source: https://svnweb.freebsd.org/ports/head/lang/gcc7/files/patch-gcc_config_i386_i386.c?view=markup&pathrev=545751
Fix the build failure when built with newer gcc:
/home/pmos/build/src/gcc-4.9.2/gcc/reload1.c:89:24: error: use of an operand of type 'bool' in 'operator++' is forbidden in C++17
89 | (this_target_reload->x_spill_indirect_levels)
| ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~
/home/pmos/build/src/gcc-4.9.2/gcc/reload1.c:444:7: note: in expansion of macro 'spill_indirect_levels'
444 | spill_indirect_levels++;
| ^~~~~~~~~~~~~~~~~~~~~
Patch source: https://github.com/ChrisMacGregor/esp-open-sdk/blob/master/1001-fix-reload1-compile-error.patch
This should be reverted when this Alpine issue has been closed:
https://gitlab.alpinelinux.org/alpine/aports/-/issues/13778
sxmo-common already had this for some reason.
[ci:ignore-count]
[ci:skip-build] Already built successfuly on CI in MR
the networkmanager package in alpine was refactored and the wifi and
wwan components were split off into separate subpackages. without these,
wifi and wwan networking are broken.
also see: aports 830af82c6c
[ci:ignore-count]
This code wasn't actually working for me on samsung-m0, so I
investigated and came up with that this fixes it. I'm not sure if you
are supposed to be able to omit the deviceinfo_ prefix? Either way, it
doesn't seem to work, so let's fix it.
Fixes fad7c7ef8e
XWayland is a phosh dependency. Having it in pmb_recommends adds
nothing and can be confusing, since power users would expect that
removing it from world would remove the package. That will never
be the case since phosh depends on it.
[ci:skip-build] already built successfully in CI
Adding bluez to "depends" in order to enable bluetooth service (doesn't
work on packages in "_pmb_recommends").
Adding blueman to "_pmb_recommends" to allow uninstallation by the
user.
Closes https://gitlab.com/postmarketOS/pmaports/-/issues/1465
nmcli and nmtui are still missing in Gnome.
Move NetworkManager dependencies from postmarketos-ui-phosh, and phosh
will get them when depending on postmarketos-ui-gnome.
postmarketos-ui-i3wm|mate.post-deinstall:
Contains removal of file "61-autologin.conf"|"65-autologin.conf".
However, this file is removed by apk automatically unpon
deinstallation.
postmarketos-ui-i3wm|mate|xfce4.pre-deinstall:
Contains disabling service "lightdm". Removing display manager service
upon deinstallation isn't done by other UIs either. It can lead to
unexpected behaviour when installing another UI using lightdm and then
uninstall MATE UI.
Additionally
postmarketos-ui-i3wm.post-upgrade:
Removed postmarketos-ui-i3wm.post-upgrade and replaced it with a link to
postmarketos-ui-i3wm.post-install, like it's done in MATE and Xfce4.
I usually end up installing it on new installs. Why not enable it by
default and have a more polished experience for users? Most users will
use a gtk app and/or use the gtk file chooser
mesa-egl is usually installed by dependencies of ui packages, but when
choosing the "none" ui option in pmbootstrap, it isn't selected, leading
to libEGL.so.1 not being found.
Add it as an explicit dependency.
[ci:skip-build]: already built successfully in CI
Add and rearrange dependencies with new apps, and fix angelfish package
name.
Adds the following packages to extras:
- alligator (rss reader)
- kasts (podcasts)
- tokodon (mastodon client)
Move neochat from a required to an extra dependency, since it's a
matrix client (which many people may not need).
Add plasma-mobile-sounds to main dependency, so that kclock (and dialer
in the future) have sounds to choose from.
Rename plasma-angelfish to angelfish dependency since plasma-angelfish
was renamed in alpine at some point.
Remove the part of the description of the package that says numeric
passwords are required (no longer the case).
When moving the code to it's own repo I changed the license to GPL-2.0,
I forgot to update the APKBUILD.
[ci:skip-build] already built successfully in CI
Shared package for shared gnome and phosh ui configurations
Additionally, added missing dependencies:
Both Phosh and GNOME need elogind to do sleep inhibition and to
provide pam modules. gnome-bluetooth has some small udev rule
that helps marking devices for rfkill. Given that most devices
in pmOS have a bluetooth, this should be useful as a dependency.
These were most likely copied from phosh, but not necessary in
GNOME. They safe space in the interface, but GNOME Shell is really
not that useful in very narrow devices, so adding a configuration
for such cases should be unnecessary.
The dconf configuration and installation file was needed because the
schemas `sm.puri.phoc.application.org-gnome-maps` and
`sm.puri.phoc.application.firefox` are not schemas that can be overriden.
The actual schema is `sm.puri.phoc.application`, which is a relocatable
schema. Therefore, we could use an override to specify the default,
but with a simple configuration file, gsettings cannot relocate the
schema. Therefore, the dconf configuration makes sense for these kind
of schemas. For regular schemas that can be overriden with an override
file, it is simpler to just use it.
Phosh takes care of it in a smarter way[1]. The custom override also has the
consequence of never showing closing buttons in docked mode, which can be
an inconvenience.
[1] https://gitlab.gnome.org/World/Phosh/phosh/-/blob/main/src/docked-manager.c#L292-L295
Or in case the lines change with time:
```C
phosh_docked_manager_set_enabled (PhoshDockedManager *self, gboolean enable)
if (enable)
g_settings_reset (self->wm_settings, WM_KEY_LAYOUT);
else
g_settings_set_string (self->wm_settings, WM_KEY_LAYOUT, "appmenu:");
```
Phosh already installs these schemas by default[1] and makes them specific
to the Phosh desktop. Originally these might have been needed because
either Phosh didn't ship the overrides or/and tinydm wasn't setting the
environment variable XDG_CURRENT_DESKTOP properly[2]. To verify that the
behavior of the Phosh override is working as expected one can do the following
from an ssh session (so that the full DE envvars are not set):
```bash
$ export DISPLAY=:0 # so that gsettings reset works
$ gsettings reset org.gnome.desktop.interface clock-show-date
$ gsettings get org.gnome.desktop.interface clock-show-date # false
$ sudo rm /usr/share/glib-2.0/schemas/000-postmarketos.gschema.override
$ sudo glib-compile-schemas --strict /usr/share/glib-2.0/schemas/
$ gsettings get org.gnome.desktop.interface clock-show-date # true (which is the default)
$ export XDG_CURRENT_DESKTOP=GNOME:Phosh
$ gsettings get org.gnome.desktop.interface clock-show-date # false (from phosh override)
```
[1] https://gitlab.gnome.org/World/Phosh/phosh/-/blob/main/data/00_sm.puri.Phosh.gschema.override
[2] https://gitlab.com/postmarketOS/tinydm/-/merge_requests/12
firefox scaling was set to true before `mobile-config-firefox` existed.
In new installations false is the default, so explicitly stating false is
only necessary for upgrades. Since the default was changed in one and a half
years ago in fef3af0d75 when the
package was still in version 4, removing it should not have any impact. If
anybody had an edge installation not upgrade for more than 1.5 years, it would
definitely be wiser to reinstall than to upgrade.
Glade can be useful if you're building GTK apps on your phone when
making use of convergence, so let's unhide it. The reason it was
hidden was that it gets pulled in when building Phosh, but this
might be solvable in a better way.
Hiding of org.gnome.Extensions can probably be dropped when
https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/31086
has been merged.
Enable screen locking and embed virtual keyboard. For devices with a
hardware keyboard, this is unfavorable. For touch devices, however,
that's needed for unlocking the screen.
Additionally enable single-click behavior in file manager. This applies
also to the desktop icons. Again this is unfavorable for conventional
devices but advantageous for touch devices.
unclutter-xfixes version 1.6 introduced new options --hide-on-touch
and --start-hidden. That seems appropriate enough to cover the use
cases touchscreen usage (hide cursor) and mouse/touchpad usage (show
cursor).
The main change is to move the postmarketOS-specific Xfce4 configs
from /etc/skel to /etc/xdg. This improves the config handling because
the location in /etc/xdg can be defined as the default fallback
configs.
Moving the gtk-3.0 folder to /etc/xdg did not work. Therefore this
one remains in /etc/skel.
Beyond this, there are some minor changes from the xfce4-phone
repository:
- Change icon path of whiskermenu button to new location
- Apply pmOS wallpaper to more monitors
- Several clean-ups in the config files
- Project naming scheme is changed to "lk2nd-msmXXXX"
- lk1st-msm8916: Experimental support for running as the "first" lk
- Secondary core bringup on non-psci firmware is now done by lk2nd
- rproc selection is now handled by lk2nd
- Some display information improvements
- New devices and various improvements for existing ones
[ci:skip-build]: already built successfully in CI
Fixes error: postmarketos-base-18-r0: trying to overwrite etc/fstab owned by alpine-baselayout-data-3.2.0-r20.
caused by 9ecba8a514
[ci:skip-build] already built successfully in CI
This installs/starts udiskie, a udisk2 helper, that facilitates
auto-mounting of removable drives.
Note support for umounting is broken in the current Portfolio release,
so disks have to be umounted manually:
udiskie-umount /run/media/<user>/*
I decided to add this to the `depends` and not `pmb_recommends`, because
I felt like 1) this is a feature that folks would expect to work, 2) by
having it in depends, it'll 'fix' existing installs where mounting
removable disks automatically is not implemented
MMS support (via mmsd-tng) involves sending/receiving network
requests/responses over the wwan interface. If it's ipv4-only and the
device is connected to some other ipv4 network on another iface (like
wifi), this can cause the rp_filter to reject responses on wwan iface
because it incorrectly thinks they are martian packets.
This does theoretically disable some "security" feature in the kernel,
but it's worth noting that:
1) rp_filter isn't implemented at all in the kernel for ipv6
2) other distros (mobian, pureos at least) are also disabling rp_filter
3) this seems to be a relatively common problem with folks using mms on
pmOS, since many carriers' data networks are ipv4-only
also see:
https://gitlab.com/kop316/mmsd/-/merge_requests/55/diffs?commit_id=b22c253fb939ff1eb949ea4e628706e6a28c851a
[ci:skip-build] already built successfully in CI
ondev-boot-mount.sh expects the 'real' losetup (it uses --show), instead
of the busybox version (which doesn't support that parameter).
Alpine broke this in 31372fab76 when they split out losetup from
util-linux
[ci:skip-build]: already built successfully in CI
Allow calling the script with:
SPLASH_CONFIG=$srcdir/splash.ini devicepkg_build $startdir $pkgname
In order to pass a custom splash config, as it will be used with the
PineNote (MR 2910).
The postmarketOS icon was moved to a new location (see issue
pmaports#1418). Therefore the button of whiskermenu in the panel
becomes empty. This commit creates a symlink at the old location
to restore the icon on existing Xfce4 installations.
[ci:skip-build] already built successfully in CI
This copies rules from /etc/udev/rules.d as well which ensures that
device-specific udev rules (e.g. for Nokia N900) are available in the
initfs.
Relates to: #1411
Prevent apk from pulling in pipewire-pulse instead of pulseaudio, as
this leads to various audio issues with Phosh in postmarketOS (volume
buttons not working, no sound in various applications).
Pipewire will be a great replacement for pulseaudio, but let's rather
enable it intentionally for Phosh once we fixed everything that's
currently breaking with it. Without this patch it may get installed when
installing or upgrading other packages (not entirely sure how it gets
triggered yet, but I have seen it myself multiple times and we've gotten
reports about it).
[ci:skip-build] already built successfully in CI
Merge list:
5fd3e07fd10e Linux 5.16.2
a498f4a42b81 ALSA: hda/realtek: Re-order quirk entries for Lenovo
21ad9041b615 ALSA: hda/realtek: Add quirk for Legion Y9000X 2020
5053b09e0e90 ALSA: hda/tegra: Fix Tegra194 HDA reset failure
ea3fcb111c87 ALSA: hda: ALC287: Add Lenovo IdeaPad Slim 9i 14ITL5 speaker quirk
73990b61c549 ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus Master after reboot from Windows
2ac0c35159be ALSA: hda/realtek: Use ALC285_FIXUP_HP_GPIO_LED on another HP laptop
08968ce43f9d ALSA: hda/realtek: Add speaker fixup for some Yoga 15ITL5 devices
7faa2fb7bcd1 perf annotate: Avoid TUI crash when navigating in the annotation of recursive functions
1f21b193707e firmware: qemu_fw_cfg: fix kobject leak in probe error path
fd8a2f12de64 firmware: qemu_fw_cfg: fix NULL-pointer deref on duplicate entries
261f47d05859 firmware: qemu_fw_cfg: fix sysfs information leak
105ee59fc79e rtlwifi: rtl8192cu: Fix WARNING when calling local_irq_restore() with interrupts enabled
230d1fa69ff8 media: uvcvideo: fix division by zero at stream start
c923276ddd49 video: vga16fb: Only probe for EGA and VGA 16 color graphic cards
0b1a05b219fe 9p: fix enodata when reading growing file
4947e1735a87 9p: only copy valid iattrs in 9P2000.L setattr implementation
cda396e5ce51 NFSD: Fix zero-length NFSv3 WRITEs
f3f2900c93e2 remoteproc: qcom: pas: Add missing power-domain "mxc" for CDSP
07f5f305ed81 KVM: s390: Clarify SIGP orders versus STOP/RESTART
60af2066bc5d KVM: x86: don't print when fail to read/write pv eoi memory
ec985a8dfbe9 KVM: x86: Register Processor Trace interrupt hook iff PT enabled in guest
51d24f081b90 KVM: x86: Register perf callbacks after calling vendor's hardware_setup()
68fe61050dc2 perf: Protect perf_guest_cbs with RCU
8b1530a3772a vfs: fs_context: fix up param length parsing in legacy_parse_param
af8ad4718278 remoteproc: qcom: pil_info: Don't memcpy_toio more than is provided
931b93ac1fce orangefs: Fix the size of a memory allocation in orangefs_bufmap_alloc()
16a1622c3424 drm/amd/display: explicitly set is_dsc_supported to false before use
3bddfeab42ab devtmpfs regression fix: reconfigure on each mount
Change-Id: I3238c7c90d5723ca09df84a825dc4ad156dc92f9
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build] Already built well once on CI in MR
Ran `pmbootstrap kconfig edit linux-postmarketos-qcom-sdm845` to
regenerate the defconfig.
Change-Id: Ie4b9e6e4a790d37a1a1d8f479e7e10dfd3ef9db0
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build]: already built successfully in CI
Use the new linux-postmarketos-exynos5 package. A dtb for klimtwifi
is added as well, even though the device has not been ported yet.
[ci:skip-build]: Already built successfully in MR CI.
Seems like the PinePhone keyboard needs KEYBOARD_MATRIX enabled to
function at all. Also works during OSK when using FDE.
Signed-off-by: Jean Lucas <jean@4ray.co>
[ci:skip-build] Trivial KCONFIG change
Some patches from bam-dmux patchset (mobile internet on 8916/8974)
have landed upstream.
Other than that, no changes compared to 5.15.x kernel.
[ci:skip-build]: already built successfully in CI
To make sound work out of the box. And being able to choose audio
output when connected via bluetooth.
[ci:skip-build]: already built successfully in CI
Kodi UI is broken on Wayland with Cage, switch to GBM instead.
GBM is more suitable for running standalone and easier to maintain.
Also add udev rules to automount USB drives as you cannot access
them from Kodi otherwise.
[ci:skip-build] already built successfully in CI
unudhcpd is a lightweight dhcp server that effectively implements static
assignment of a single IP on an interface regardless of client MAC, with
no lease. The end result is that a system connected to a pmOS device via
usb networking should always get an IP, and always get one very quickly.
This adds a new dependency on this dhcp server, and starts it in initfs.
Fixes#1199
[ci:skip-build] already built successfully in CI
allows applications that use midi files that expect a synthesizer to work
via a new file that appears under /dev
[ci:skip-build]: already built successfully in CI
This reverts 5fa1755fba. Bundling
/sbin/modprobe is no longer necessary because Alpine switched back to gz
for LTS kernels with [1].
Relates: !2693
Relates: #1294
[1]: 12243ca822
This is done as devices that use Heimdall flash to KERNEL instead of boot
like in case of fastboot, plus devices with weird partitions can set the
var in deviceinfo
SHIFT6mq (axolotl) requires this panel driver.
Config is already merged upstream:
- 9ed86f14d0
Change-Id: I7d0286084df53b1a160702e8928f4691153b64f4
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build] Already built on CI in MR
This configures bootmisc to clear /tmp on bootup. I think most folks
expect distros to do this, many even mount /tmp as tmpfs. I don't think
that's a great idea in pmOS since RAM is usually limited on many
devices. So this, clearing it on boot, seems like a reasonable compromise.
Fixes#1342
NOTE: Should be likely backported without the kernel config changes
since Alpine 3.15 still has the older gcc version.
[ci:skip-build] Already built successfully on CI
rc-update fails if this service is not in the default runlevel,which is
the case if it's a brand new installation, or would be the case later on
upgrading this package again after the service was already removed from
the runlevel.
The issue that c47c62e3 set out to solve isn't fatal, if polkit fails to
start by openrc then users can manually remove it from the runlevel.
partially reverts c47c62e3
[ci:skip-build] already built successfully in CI
This upgrades ttyescape to use buffyboard, a new fbkeyboard replacement
by @Cherrypicker. It adds a lot of missing keys and uses the same layout
as Phosh's Squeekboard, so should feel much more like home for Phosh
users.
This also switches to the new HKDM daemon for hotkey handling, replacing
triggerhappy.
[ci:skip-build] already passed
A recent(?) update in shellcheck made this fail, possibly because the
test in shellcheck was fixed(?) or ???
The failure this fixes is:
Test with shellcheck: ./main/msm-firmware-loader/msm-firmware-loader.sh
In msm-firmware-loader.sh line 49:
if [ -z "${FW_PARTITIONS##*$PARTNAME*}" ] && [ -n "$PARTNAME" ]
^-------^ SC2295 (info): Expansions inside ${..} need to be quoted separately, otherwise they match as patterns.
[ci:skip-build] already built successfully in CI
Simple upgrade with few generic kernel features enabled
* IWD support
* F2FS
* NTFS3_FS
* USB mass storage support
* disable MTD and build more things as modules to reduce
kernel size to compensate some new built-in options,
as kernel doesn't boot otherwise.
No new things for pmOS's devices (yet). Should work same as before.
[ci:skip-build] Already built on CI in MR
Changing source to freemangordon's branch as that is much more stable and does not crash, got firefox running, which with older mesa would crash the GPU
Display the app icon properly, instead of the "unknown" icon, in the
activity view. Phosh attempts to open a .desktop file with the name of
the gtk app-id, but the app-id is "firefox" and the file is named
org.mozilla.firefox.desktop (see related commit, where it was renamed
for a good reason). The way Phosh is doing the name lookup doesn't
always work for other apps too, phosh_get_desktop_app_info_for_app_id()
has workarounds e.g. for gnome-control-center hardcoded. As workaround,
add a .desktop file that makes the icon show up properly, but is not
displayed anywhere else (NoDisplay=true).
Replace epiphany with FF in the default favorite applications in phosh
(top 4 displayed at the top). We already install FF instead of epiphany
and so the 4th place is currently empty.
Related: 2d291a4afc
Finally a new upgrade! This brings along some minor driver changes and
improvements, more stuff slowly landing upstream.
We also get a few new splats during boot, these are inevitable at this
point due to fw_devlink changes and large reworking of the drm/msm code,
they are caused by the common clock framework not knowing that some
clocks are left enabled by the bootloader, it panics when they aren't in
a state it expects. They are harmless as far as I know.
[ci:skip-build]
