All kernels compile again, after the GCC 8 upgrade.
All 3.x kernels have been changed to use GCC 6 now, because we can't
say for sure that they boot with GCC 8 even if we made them compile
with that newer GCC. If someone wants to test a kernel for a newer
device which they can test, see the instructions on
<https://postmarketos.org/vendorkernel>.
The linux-sony-castor-windy 4.x kernel did not compile out of the box
with the latest GCC, so we set it to GCC 6 as well. This can probably
be fixed easily.
linux-teclast-x80-pro: removed Werror and updated to latest 4.14 kernel
from kernel.org, otherwise this would not compile anymore (tested with
both GCC 6 and 8, probably incompatibility with the latest binutils or
something).
This commit will take too long to compile in CI, so let's [skip ci].
I've compiled all kernels multiple times and fixed them up until all of
them were working again.
Related: #103
* Added linux-postmarketos-allwinner kernel
* Added copy of alpines u-boot package with pine-a64lts support
* Changed postmarketos-mkinitfs to add the plain .dtb file to the boot partition
* Travis and Coveralls badges
* aports: instead of <https://github.com/postmarketOS>, use
<https://postmarketos.org>
* References to full URLs to issues and pull requests replaced with
a hash and the number
* grsec check: simplify error message, remove link to github issue
(nobody is using that anymore anyway)
Alpine's firmware packages have been updated to include the latest
raspberry pi firmware. This commit adjusts our aports.
Details:
* remove obsolete `aports/temp/linux-firmware`
* `firmware/firmware-pi-bluetooth`: rename to `device/bluetooth-raspberry-pi`
and remove firmware files (they are part of Alpine's `linux-firmware` now)
* `device-raspberry-pi`: depend on `bluetooth-raspberry-pi`
* `device-raspberry-pi`: note that Alpine's kernels depend non free firmware
* `device-raspberry-pi`: remove non free firmware subpackage
Kernel is downstream. System boots. Flash the device using the netcat
method to an external SD (use the entire SD, not a partition, as the
target device) because the internal memory is too small.
The ASUS MeMO Pad FHD 10 (ME302KL) is kinda like an enlarged version
of flo, all the unofficial Lineage / TWRP work has been derived from
flo. So eventually it should run mainline :) but let's start with this.
The headphone jack (sec_jack) driver no longer registers as an input device
itself. It now listens for events on the gpio-keys input device. This
changed the enumeration of /dev/input devices. The touchscreen is now
/dev/input/event1.
This fixes things which depend on deviceinfo_dev_touchscreen such as
osk-sdl.
* change "pmbootstrap kconfig_check" to "pmbootstrap kconfig check"
* change "pmbootstrap menuconfig" to "pmbootstrap kconfig edit [-x|-g]"
(with legacy alias, because the first syntax was referenced to a lot)
* enable X11 interfaces: -x: xconfig, -g: gconfig
* new function to copy the xauthority file:
pmb.chroot.other.copy_xauthority()
* remove menufconfig() function from the kernel template and all kernel
aports ([skip ci] because it would rebuild all kernels and run out of
time). Alpine has dropped this as well, and it wouldn't work with the
new code anyway.
* linux-samsung-p4wifi: Use libressl-dev
* linux-samsung-p4wifi: Update to kernel based on mainline tegra_defconfig
Previously it was based on the config from a mainline-ish kernel for
Android. The remaining Android specific patches have been dropped.
It is now mainline with out-of-tree drivers and corresponding hardware
specific patches/fixes/hacks.
- depend on the firmware-lg-hammerhead-modem and
firmware-lg-hammerhead-adsp
- depend on the modem-qcom-msm-mainline-common
Currently adsp firmware is not used actually given upstream kernel
doesn't have support for adsp/sound subsystem. But it will be used
eventually.
Changes:
* device-samsung-klte with both downstream and mainline kernel
subpackages
* linux-postmarketos-qcom updated to last commit
What works in mainline kernel:
* internal SD card
* volume and home key buttons
* usb network
Add modem-qcom-msm-downstream-common package that pulls in the
dependencies.
qcom_rmtfs now has udev rules to find the storage partitions. My hope
is they can be written flexibly enough to cover all devices and kernel
flavors.
Guide for connecting to wlan is on the wiki page for the device, wifi
chip is BCM4334. Wlan interfaces are wlan0 and p2p0. Connection seems
stable, was able to install some packages.
* Add initial device support for Xiaomi Redmi Note 4 (xiaomi-mido)
* Update APKBUILD
* Update APKBUILD
* Wifi support for Xiaomi Redmi Note 4
* Update APKBUILD
* Download firmware from different repo for Xiaomi Redmi Note 4
* Split up cat line
The `msm-fb-refresher` updates the screen for msm based devices. It is
not needed for all devices, so we had some extra code in the initramfs,
that would only add it when the `deviceinfo_msm_refresher` variable was
set. However, we are able now to add files to initramfs hooks, so this
hack can be removed and simplify everything.
Changes:
* Remove `deviceinfo_msm_refresher` from all deviceinfos
* Add sanity check for it
* Move all `deviceinfo` sanity checks to an extra function
* `postmarketos-mkinitfs`: remove code for msm refresher
* `msm-fb-refresher`: add initramfs hook
* firmware-samsung-i9195: new wlan subpackage
* samsung-i9195: add wlan firmware to nonfree-firmware dependencies
* firmware-samsung-i9195: change pkgver to sequential numbering.
this breaks package management. be careful when updating this package.
the old version was `201707.1`, which is higher than `1.1.0`.
Previous post install action results in loading wlan module during
sysinit. This is not possible since wlan device is only exposed after
wcnss-wlan service. This also delays ssh startup for approximately 3
minutes.
Loading wlan module should only be done on default runlevel, after
wcnss-wlan service has been started.
Also add a reference fb.modes file, although directfb applications still
doesn't work and cause the framebuffer driver to crash.
- Currently just graphics along with weston tested
- Depend on firmware-adreno from device-lg-hammerhead
- Reduce dep of linux-firmware
- Just pull qcom, bracm and adreno firmware
* Progress can be followed in #1206
* Kernel boots with device tree from LineageOS and can
be installed by android recovery zip
* Networking comes up at boot but there's not display yet
* As discussed in IRC/matrix, we're removing `linux-postmarketos-lts`
for now. The kernel isn't used right now, and we save lots of
maintenance effort with not updating it every week or so.
* new config option `"kernel"` with possible values:
`"downstream", "mainline", "stable"` (downstream is always
`linux-$devicename`)
* ask for the kernel during `pmbootstrap init` if the device package
has kernel subpackages and install it in `_install.py`
* postmarketos-mkinitfs: display note instead of exit with error when
the `deviceinfo_dtb` file is missing (because we expect it to be
missing for downstream kernels)
* device-sony-amami:
* add kernel subpackages for downstream, mainline
* set `deviceinfo_dtb`
* device-qemu-amd64: add kernel subpackages for stable, lts, mainline
* test cases and test data for new functions
* test case that checks all aports for right usage of the feature:
* don't mix specifying kernels in depends *and* subpackages
* 1 kernel in depends is maximum
* kernel subpackages must have a valid name
* Test if devices packages reference at least one kernel
* Remove `_build_device_depends_note()` which informs the user that
`--ignore-depends` can be used with device packages to avoid building
the kernel. The idea was to make the transition easier after a change
we did months ago, and now the kernel doesn't always get built before
building the device package so it's not relevant anymore.
* pmb/chroot/other.py:
* Add autoinstall=True to kernel_flavors_installed(). When the flag
is set, the function makes sure that at least one kernel for the
device is installed.
* Remove kernel_flavor_autodetect() function, wherever it was used,
it has been replaced with kernel_flavors_installed()[0].
* pmb.helpers.frontend.py: remove code to install at least one kernel,
kernel_flavors_installed() takes care of that now.
* Specify a device tree binary file for p4wifi kernel
Previously the p4wifi kernel was using Android patches which append the
dtb to zImage in the kernel makefile.
Now follow mainline kernel convention of leaving the zImage and dtb
separate. Follow postmarketOS convention of specifying dtb file in
deviceinfo.
* Use linux-postmarketos-mainline APKBUILD build functions for p4wifi
* Update linux-samsung-p4wifi to kernel 4.16
- Use mainline broadcom bluetooth hci driver
- Use mainline atmel_mxt_ts driver
- Use mainline stmpe811 mfd driver and add stmpe811 ADC block
Note about PMOS_NO_SAFESTRAP kernel cmdline:
This can be used to forcefully skip SafeStrap partition mount in device
initramfs hook, for example when booting with droid4-kexecboot on device with
SafeStrap configured as well.
The kgsl 3d driver causes the device to boot loop, so disable this for
now.
The device boots ok after removing the kgsl driver, although continuing
boot from debug-shell via `pmos_continue_boot` does not work (seems to
be a bug in msm_fb driver). So, one has to reflash the boot partition
generated with no intfs debug shell to enjoy this improvement.
* [samsung-p4wifi] Include modules in kernel package
* [samsung-p4wifi] Load wifi modules at boot
* [samsung-p4wifi] Use mainline wm8994 sound driver
* [samsung-p4wifi] Add ALSA UCM config
Generated from xml2ucm tool.
* [samsung-p4wifi] Add headphone jack detect udev rules
* [samsung-p4wifi] Remove touchscreen calibration
It is not a resistive touchscreen. The default calibration works.
* Qualcomm MSM modem: 'rmtfs' support packages
* qcom_rmtfs: Server that talks to modem over IPC to allow it
read/write data for its persistent storage. This is needed for it to
boot, as well as periodically during usage. Added a patch that
it expects the storage path symlinks in /etc instead of /boot.
* qrtr: IPC library for rmtfs
* libqipcrtr4msmipc: adapter library to make qrtr work on kernels with
AF_MSM_IPC support. AF_QIPCRTR is the mainline equivalent since Linux
~4.7.
* msmipc-dev: Header files for qrtr and libqipcrtr4msmipc.
Thanks to Bjorn Andersson <https://github.com/andersson> for rmtfs and
qrtr.
* libsmdpkt_wrapper: adapter lib for QMI clients
The SMD serial packet driver in Qualcomm kernels has, AFAICT, a bug
in poll(); this works around it so that qmicli et al can work.
* i9195: firmware (modem only right now)
* add ofono (with patch for MSM devices)
Based on Alpine's package.
* i9195: add modem support
* move all modem related packages to aports/modem
* Add nonfree_firmware subpackage to all devices, that depend on
nonfree firmware.
* Some packages were depending on `linux-firmware`, but without having
Wifi working. Removed that dependency as it was probably added by
accident. If it was really necessary, chosing the appropriate
split linux-firmware package (e.g. linux-firmware-brcm) is better
anyway (that has been changed recently in Alpine and is possible
now).
* Add a test case that makes sure we don't have firmware depends
without subpackages in device aports anymore.
* device-*: add postmarketos-base to depends
* aportgen: add postmarketos-base to depends
* Add test case
* postmarketos-base: Don't depend on devicepkg
* msm-fb-refresher: Enable service in post-install
It lacked some hardware config, such as the USB switch.
With this change, I was able to SSH over the USB network.
I based this off of LineageOS 14.1's config file from its
build root. I think we were missing the secondary config
file
(TARGET_KERNEL_VARIANT_CONFIG := msm8930_serrano_eur_lte_defconfig
in BoardConfig.mk).
* gp-peak: Add support for osk-sdl
* gp-peak: Move non-kernel files to device-gp-peak
* gp-peak: Add audio support
Manually trigger the udev rules for audio devices and add the default user to the audio group
* Added a ui package for i3wm
* Added n900 specific i3wm config
* Fixed mixed tabs and spaces in i3status.
This is also the first commit made on an n900
running postmarketOS.
* Removed redundant X11
* Use lock.sh to lock the device
* Windows management improvements
* bump pkgver
* Fix device-nokia-n900 checksums
* Fixed path in the i3wm split package
Binary packages are rebuilding. If your kernel is not rebuilt yet, and
you don't want to build it yourself, just checkout the previous
pmbootstrap commit.
This commit also changes the arch from the postmarketOS kernels from
"all" to the ones where we actually have a kernel config.
Fixes#1229.
Fixes#1227.
This also updates the hash in linux-postmarketos-mainline, because the
hash changed upstream (they updated their git version server-side?).
This port includes:
* Weston including touch and WiFi (using e.g. firmware-samsung-i9305) works.
* Touchscreen calibration for osk-sdl
* Sound configuration
* Udev rules for touch and pen, pen works!
* Automatically generate a calibration matrix for libinput
This takes the calibration matrix for wayland and divides the pixel
offsets by the device width/height.
* Bump pkgrels of devices using devicepkg-dev
This causes new packages to be generated, using the new devicepkg-dev
version.
The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm
Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches
are needed for successful compilation. The screen dimension is 720x1280.
The touchscreen device name is ft5x06_i2c. Use this name for udev
instead of hardcoded device path. Also add a workaround for red
screen weston by setting weston_pixman to 2
The screen doesn't refresh. Enabling msm-fb-refresher as suggested.
Add udev rule to indicate whether the device is in charging state.
Green led indicates that the device is charging, whereas red light
indicates that the device is discharging.
For prima wlan module to work, an initialization procedure is needed (
echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module
(wlan.ko). Also build the prima wlan as module.
Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware
to run. Add the required wifi firmware to enable the wifi interface.
Add an openrc service to load wlan module after wcnss_service is
initialized.
Current status:
- flashing only manually (intel phones have different bootimg format)
- usb networking works
- xorg works using fbdev
- packages needed for wayland are not available for x86
- touch works in xorg and osk-sdl
Add a blobtools option to the deviceinfo file for creating specific
blobs for the Asus TF101 tablet. This will make it easier to flash
afterwards with ADB.
- Removed the framebuffer configuration in the initramfs hook
- Added patch for fixing the framebuffer mode in the kernel source
- Cleanup linux-samsung-i9070 APKBUILD
