Commit graph

9 commits

Author SHA1 Message Date
Stefan Hansson
197eb13ef1
linux-postmarketos-qcom-msm8994: enable zstd firmware compression support (MR 5436)
See https://gitlab.com/postmarketOS/pmaports/-/merge_requests/5380

[ci:skip-build]: already built successfully in CI
2024-08-02 09:09:24 +02:00
FuchtelJockel
59b3c1af1d
linux-postmarketos-qcom-msm8994: update dt for h815 (MR 4915)
- add volume up/down, power key
- add hall sensor
- add sd card support
- fix normal boot

[ci:skip-build]: already built successfully in CI
2024-03-14 10:51:54 -07:00
FuchtelJockel
a2cd4434b6
linux-postmarketos-qcom-msm8994: upgrade to 6.8 (MR 4915) 2024-03-14 10:51:54 -07:00
FuchtelJockel
83f63d1c1b
linux-postmarketos-qcom-msm8994: upgrade to 6.6-rc3 (MR 4344)
is upstream:
- Fix-cont_splash_mem-mapping
- removed-clash-with-smem_reg

[ci:skip-build] already built successfully in CI
2023-09-29 10:36:57 -07:00
Petr Vorel
73a8aec0cc
linux-postmarketos-qcom-msm8994: upgrade to 6.3.0-rc5 (MR 3875)
Angler and Bullhead support is in early stage other msm899{2,4} does not
use the package yet => safe to use rc kernels to get closer to
qcom/for-next git tree.

Kernel 6.2 and 6.3 got few memory map fixes for angler and bullhead.

* Added 3 not yet merged patches for angler:
  - add regulators
  - memory overlap fixes
  - proper cont_splash_mem setup

* Removed 0004-arm64-dts-qcom-msm8992-Don-t-use-sfpb-mutex.patch
  (already applied and backported to 6.1 stable), thus renumber the
  following patch.

* config
  - Enable zram with lzo-rle, add pmb:kconfigcheck-zram (fixes warning:
    zramctl: /dev/zram0: failed to set algorithm: Invalid argument)
  - Enable crc32, lz4hc, zstd.

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
[ci:skip-build]: already built successfully in CI
2023-04-11 09:34:49 +02:00
Petr Vorel
ca20cbcaf4
linux-postmarketos-qcom-msm8994: upgrade to 6.1.2 (MR 3762)
New features:
* msm8994-huawei-angler: Add sdhc1 definition (internal SD card).

Backporting 3 patches:
* 0001-arm64-dts-msm8992-bullhead-add-memory-hole-region.patch
fixes bullhead boot since 6.0-rc1, already in qcom tree

* 0002-arm64-dts-qcom-msm8992-bullhead-Fix-cont_splash_mem-.patch
memory fix, likely to be merged

* 0003-arm64-dts-qcom-msm8992-bullhead-Disable-dfps_data_me.patch
memory fix, likely to be merged

* 0004-arm64-dts-qcom-msm8992-Don-t-use-sfpb-mutex.patch
memory fix, likely to be merged

* 0005-arm64-dts-msm8994-angler-fix-the-memory-map.patch
fixes angler reset during starting services in rootfs,
likely to be merged

Remove all backported commits from newer versions.

While at it, remove various CONFIG_NET_VENDOR_.* and
CONFIG_MSM_.* and CONFIG_.*_QCOM_.* for other SOCs.

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
[ci:skip-build]: already built successfully in CI
2023-01-05 00:38:16 +01:00
Newbyte
70efe55031
linux-*: install dtbs to /boot/dtbs (MR 3254)
[ci:ignore-count]: Too many packages probably
[ci:skip-build]: No way this would finish in time
2022-10-09 17:04:30 +02:00
Petr Vorel
891a4cb5a1
linux-postmarketos-qcom-msm8994: upgrade to 5.17.2 (MR 3073)
patches added are (not all, just some) fixes and feature enhancements
for msm8992 and msm8994 from qcom mainline maintainer tree [1] for v5.18
and v5.19.

Changes:
* update deviceinfo_dtb_mainline for device-huawei-angler and
  device-lg-bullhead.
* add sdhc1 support for device-huawei-angler

[1] https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>

[ci:skip-build] Already built successfully in CI in MR
2022-05-01 12:26:18 +03:00
Bart Ribbers
1fcb7b49be
linux-postmarketos-qcom-msm8994: move to device/testing (MR 2882) 2022-01-26 12:18:52 +01:00
Renamed from main/linux-postmarketos-qcom-msm8994/APKBUILD (Browse further)