forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/main/linux-postmarketos-rockchip/APKBUILD

111 lines
3.9 KiB
Text
Raw Normal View History

device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
# Maintainer: Martijn Braam <martijn@brixit.nl>
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
# This is seperate from linux-edge so we can control the release cycle better.
linux-postmarketos-rockchip: Enable SATA support (MR 2119) Enable SATA host support, the AHCI driver, and SCSI disk support so that some generic PCIe SATA cards will properly detect and mount SATA drives connected to them. Tested on a RockPro64 with 2 3.5" drives connected in RAID 0 to an Ableconn PEXSA115A 2-port PCIe x2 card (ASM1062).
2021-04-18 21:56:40 +00:00
# If this kernel is updated and fails to boot it's quite hard to recover the
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
# rk3399 devices due to the boot order. This kernel also has a kconfig that has
# more modules built-in that are required for successfully booting on these
# devices.
# It's important that CONFIG_ROCKCHIP_CDN_DP is _disabled_ because it causes
# boot failure
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
pkgname=linux-postmarketos-rockchip
main/linux-postmarketos-rockchip: upgrade to 5.14 (MR 2473) Adds the 0011 patch to fix a ethernet regression in 5.14
2021-08-31 00:24:02 +00:00
pkgver=5.14.0
pkgrel=0
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
pkgdesc="Mainline kernel for rockchip devices"
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
arch="aarch64 armv7"
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
_flavor="${pkgname#linux-}"
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
url="https://kernel.org"
license="GPL-2.0-only"
linux-postmarketos-rockchip: upgrade to 5.13, enable nftables (MR 2299) This switches the config over to one based on Alpine's linux-gru which is for an rk3399 chromebook. It produces way smaller kernels and has more general purpose hardware support.
2021-07-01 22:55:21 +00:00
options="!strip !check !tracedeps
pmb:cross-native
pmb:kconfigcheck-anbox
pmb:kconfigcheck-nftables
pmb:kconfigcheck-containers
pmb:kconfigcheck-zram
"
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
makedepends="
bison
devicepkg-dev
findutils
flex
installkernel
openssl-dev
perl
rsync
linux-postmarketos-rockchip: upgrade to 5.13, enable nftables (MR 2299) This switches the config over to one based on Alpine's linux-gru which is for an rk3399 chromebook. It produces way smaller kernels and has more general purpose hardware support.
2021-07-01 22:55:21 +00:00
gzip
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
xz
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
gmp-dev
mpc1-dev
mpfr-dev
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
"
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
case "$CARCH" in
aarch64*) _carch="arm64" ;;
arm*) _carch="arm" ;;
esac
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
# Source
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
_config="config-$_flavor.$CARCH"
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
case $pkgver in
*.*.*) _kernver=${pkgver%.0};;
*.*) _kernver=$pkgver;;
esac
linux-postmarketos-rockchip: upgrade to 5.13, enable nftables (MR 2299) This switches the config over to one based on Alpine's linux-gru which is for an rk3399 chromebook. It produces way smaller kernels and has more general purpose hardware support.
2021-07-01 22:55:21 +00:00
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
source="
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
https://cdn.kernel.org/pub/linux/kernel/v${_kernver%%.*}.x/linux-$_kernver.tar.xz
main/linux-postmarketos-rockchip: upgrade to 5.13.5, fix usb-c (MR 2386) 5.13.5 had some rockchip-related fixes in the changelog, so I figured why not upgrade to it. These patches from Manjaro seem to be the bare minimum required to get usb-c charging and device peripherial support working again (external display still doesn't work) [ci:skip-build] already built successfully in CI
2021-07-26 20:50:43 +00:00
0001-phy-rockchip-typec-Set-extcon-capabilities.patch
0003-arm64-dts-rockchip-add-typec-extcon-hack.patch
0004-arm64-dts-rockchip-setup-USB-type-c-port-as-dual-data-role.patch
0010-usb-typec-add-extcon-to-tcpm.patch
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
0007-block-partitions-efi-Add-support-for-IGNOREME-GPT-si.patch
main/linux-postmarketos-rockchip: upgrade to 5.14 (MR 2473) Adds the 0011 patch to fix a ethernet regression in 5.14
2021-08-31 00:24:02 +00:00
0011-stmmac-revert-stmmac-fix.patch
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
config-$_flavor.aarch64
config-$_flavor.armv7
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
"
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
builddir="$srcdir/linux-$_kernver"
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
prepare() {
default_prepare
REPLACE_GCCH=0 \
. downstreamkernel_prepare
}
build() {
unset LDFLAGS
main/linux-postmarketos-rockchip: upgrade to 5.13.4, use GCC (MR 2372) llvm was left over from Martijn's efforts to reduce the kernel size The drivers for external DP are enabled here, but all patches from manjaro that deal with DP/typec alt mode, etc are dropped since they do not solve anything on their own and may cause display instability issues... [ci:skip-build]: already built successfully in CI
2021-07-21 18:06:40 +00:00
make ARCH="$_carch" \
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
KBUILD_BUILD_VERSION="$((pkgrel + 1 ))-$_flavor"
linux-postmarketos-rockchip: upgrade to 5.13, enable nftables (MR 2299) This switches the config over to one based on Alpine's linux-gru which is for an rk3399 chromebook. It produces way smaller kernels and has more general purpose hardware support.
2021-07-01 22:55:21 +00:00
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
}
package() {
downstreamkernel_package "$builddir" "$pkgdir" "$_carch" "$_flavor"
make -j1 modules_install dtbs_install \
ARCH="$_carch" \
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
INSTALL_MOD_STRIP=1 \
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
INSTALL_MOD_PATH="$pkgdir" \
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
INSTALL_DTBS_PATH="$pkgdir/boot/dtbs-$_flavor"
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
# not all armv7 devices (google-veyon-jerry) support booting gzipped kernels yet
if [ $_carch = arm64 ]; then
linux-*: don't use 'flavor' in kernel name (MR 2426)
2021-08-25 19:35:59 +00:00
gzip -v "$pkgdir"/boot/vmlinuz
mv "$pkgdir"/boot/vmlinuz.gz "$pkgdir"/boot/vmlinuz
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
else
linux-*: don't use 'flavor' in kernel name (MR 2426)
2021-08-25 19:35:59 +00:00
mv "$pkgdir"/boot/vmlinuz "$pkgdir"/boot/vmlinuz
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
fi
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
}
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
linux-postmarketos-rockchip: upgrade to 5.13, enable nftables (MR 2299) This switches the config over to one based on Alpine's linux-gru which is for an rk3399 chromebook. It produces way smaller kernels and has more general purpose hardware support.
2021-07-01 22:55:21 +00:00
sha512sums="
main/linux-postmarketos-rockchip: upgrade to 5.14 (MR 2473) Adds the 0011 patch to fix a ethernet regression in 5.14
2021-08-31 00:24:02 +00:00
8e4f3ec3d36f774280f75dc7b004a43e09417af58f12e9c9f8348976659d4cfda7ad905f306f43fed66a27922e5c45db22e46bbfa7a0b9f365012380de3b6f64 linux-5.14.tar.xz
main/linux-postmarketos-rockchip: upgrade to 5.13.5, fix usb-c (MR 2386) 5.13.5 had some rockchip-related fixes in the changelog, so I figured why not upgrade to it. These patches from Manjaro seem to be the bare minimum required to get usb-c charging and device peripherial support working again (external display still doesn't work) [ci:skip-build] already built successfully in CI
2021-07-26 20:50:43 +00:00
10949558a6e3316ea57497f377fd120d6704f3b81725317556e49d10b570a40edb06643b06738116abbe3096be485761d436f1a0d1861bd34fc18ea45068b6b0 0001-phy-rockchip-typec-Set-extcon-capabilities.patch
b7291eecfddc7ebe9393eea864e0ee28960e8cc2f87dfc42d09426b5619f46ded97c38fb8bf26f4eea1f26bfe21396094505b3efb8676691f8751e2ffabe50ec 0003-arm64-dts-rockchip-add-typec-extcon-hack.patch
427b81472de2a473344269b2da06ac338af42e68620a281a9cb8543e545e6ed7f719acaf68c688e518b65d2132e0c66676ba5e30376ec980fd6eeaea05c2a8be 0004-arm64-dts-rockchip-setup-USB-type-c-port-as-dual-data-role.patch
e5cc0852506ea1e73213672f0c3f9144c08156f6d5e8af841bf3f7bffc0e89028507aac4718353eee20edd9069e3f81665caa5ca25e416f25e7e0da10451b67e 0010-usb-typec-add-extcon-to-tcpm.patch
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
000ddb9f10545b1231e2b78049d3fda7aed8e931c0c992f84cfe2783dd964443d137e5695775956c5db0fac30d00795adc34453acfb772155163297cc1227b8c 0007-block-partitions-efi-Add-support-for-IGNOREME-GPT-si.patch
main/linux-postmarketos-rockchip: upgrade to 5.14 (MR 2473) Adds the 0011 patch to fix a ethernet regression in 5.14
2021-08-31 00:24:02 +00:00
75a738070a42b03b248fd805f60ac506b3d22c775dc0b0365d7f9c15c28349d0e16dde9af301021d56d720d341075335e63a38be0ade89178346518c7b02de53 0011-stmmac-revert-stmmac-fix.patch
688a1be654cd00e00ac8633ab89155ceca920101a152f69da84bcdca2f76df334186f10149de1f88f0cafff61ecb5c93ba8be9a8689ceae1838cc06aa9367c96 config-postmarketos-rockchip.aarch64
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
5bd27a8baaf6f9c60ab1c991ed39a147945eb3a8ebc5cc4ba5f8dd33e4f806d0e973249faf37ec26d9c023839b4718debfbfee0e71c778c2ed8f519f364664ca config-postmarketos-rockchip.armv7
linux-postmarketos-rockchip: upgrade to 5.13, enable nftables (MR 2299) This switches the config over to one based on Alpine's linux-gru which is for an rk3399 chromebook. It produces way smaller kernels and has more general purpose hardware support.
2021-07-01 22:55:21 +00:00
"
Reference in a new issue Copy permalink