forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/community/device-pine64-pinebookpro/APKBUILD

84 lines
3.1 KiB
Text
Raw Normal View History

device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
# Reference: <https://postmarketos.org/devicepkg>
device-pine64-pinebookpro: add Clayton as maintainer (MR 2352)
2021-07-18 01:52:41 +00:00
# Maintainer: Clayton Craft <clayton@craftyguy.net>
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
pkgname=device-pine64-pinebookpro
pkgdesc="PINE64 Pinebook Pro"
pine64-pinebookpro: fix audio after 5.14 kernel upgrade (MR 2473) ucm2 paths changed after the kernel upgrade [ci:skip-build] already built successfully in CI
2021-08-31 03:09:58 +00:00
pkgver=9
device-pine64-pinebookpro: fix alsa ucm (MR 3203) [ci:skip-build]: already built successfully in CI
2022-06-06 14:51:45 +00:00
pkgrel=3
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
url="https://postmarketos.org"
license="MIT"
arch="aarch64"
options="!check !archcheck"
pine64-pinebookpro: add service for setting low power state on boot (MR 2306) This adds a very basic openrc runscript that sets the power state on /dev/nvme0 to level 2, which seems(?) to be the lowest operational power state based on some cursory internet searching (and querying the nvme drives I have, Samsung EVO and Pro) The drive path is hard coded, but could be made configurable later on. I basically wanted to get something in pmaports quickly, since this power stuff is a major source of instability for me and probably others too who add nvme drives to this device.
2021-07-04 00:38:55 +00:00
depends="
alsa-ucm-conf
pine64-pinebookpro: fix audio after 5.14 kernel upgrade (MR 2473) ucm2 paths changed after the kernel upgrade [ci:skip-build] already built successfully in CI
2021-08-31 03:09:58 +00:00
linux-postmarketos-rockchip>=5.14
pine64-pinebookpro: add service for setting low power state on boot (MR 2306) This adds a very basic openrc runscript that sets the power state on /dev/nvme0 to level 2, which seems(?) to be the lowest operational power state based on some cursory internet searching (and querying the nvme drives I have, Samsung EVO and Pro) The drive path is hard coded, but could be made configurable later on. I basically wanted to get something in pmaports quickly, since this power stuff is a major source of instability for me and probably others too who add nvme drives to this device.
2021-07-04 00:38:55 +00:00
mesa-dri-gallium
nvme-cli
postmarketos-base
u-boot-pinebookpro
pine64-pinebookpro: changes for the 5.13 kernel (MR 2299) * Add the fusb302 module in initfs for the keyboard and touchpad * Add cmdline params for improving stability fw_devlink was switched on by default in kernel 5.13, and is rumored to have issues. The others might improve nvme stability. * Disable wifi powersave * Clean up modules in the deviceinfo
2021-07-02 08:56:54 +00:00
iw
pine64-pinebookpro: add service for setting low power state on boot (MR 2306) This adds a very basic openrc runscript that sets the power state on /dev/nvme0 to level 2, which seems(?) to be the lowest operational power state based on some cursory internet searching (and querying the nvme drives I have, Samsung EVO and Pro) The drive path is hard coded, but could be made configurable later on. I basically wanted to get something in pmaports quickly, since this power stuff is a major source of instability for me and probably others too who add nvme drives to this device.
2021-07-04 00:38:55 +00:00
"
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
makedepends="devicepkg-dev"
subpackages="$pkgname-nonfree-firmware:nonfree_firmware"
pine64-pinebookpro: add service for setting low power state on boot (MR 2306) This adds a very basic openrc runscript that sets the power state on /dev/nvme0 to level 2, which seems(?) to be the lowest operational power state based on some cursory internet searching (and querying the nvme drives I have, Samsung EVO and Pro) The drive path is hard coded, but could be made configurable later on. I basically wanted to get something in pmaports quickly, since this power stuff is a major source of instability for me and probably others too who add nvme drives to this device.
2021-07-04 00:38:55 +00:00
install="$pkgname.post-install $pkgname.post-upgrade"
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
source="
deviceinfo
extlinux.conf
device-pine64-pinebookpro: trackpad and audio fixes (MR 1303) This adds a hwdb override for the trackpad that fixes the reported size, this fixes the acceleration profile and palm detection in libinput. Pulse now follows alsa paths for ucm files so the path for the rk3399 ucm has been updated to match.
2020-06-13 14:16:59 +00:00
10-pinebookpro.hwdb
device-pine64-pinebookpro: add udev rule for setting backlight perm (MR 2374) There's a generic udev rule to set group ownership of backlights to 'video', but it only runs on the ADD action, which seems to be too late(?) since the backlight device is never owned by 'video' on boot. This rule will run on CHANGE too, which might be overkill but seems to get the job done. It's now possible to set the backlight brightness on the PBP as a normal user.
2021-07-21 21:37:38 +00:00
70-edp-backlight.rules
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
mem_sleep.conf
pine64-pinebookpro: add service for setting low power state on boot (MR 2306) This adds a very basic openrc runscript that sets the power state on /dev/nvme0 to level 2, which seems(?) to be the lowest operational power state based on some cursory internet searching (and querying the nvme drives I have, Samsung EVO and Pro) The drive path is hard coded, but could be made configurable later on. I basically wanted to get something in pmaports quickly, since this power stuff is a major source of instability for me and probably others too who add nvme drives to this device.
2021-07-04 00:38:55 +00:00
nvme-powersave.initd
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
ucm/rockchip,es8316-codec.conf
ucm/HiFi
pine64-pinebookpro: changes for the 5.13 kernel (MR 2299) * Add the fusb302 module in initfs for the keyboard and touchpad * Add cmdline params for improving stability fw_devlink was switched on by default in kernel 5.13, and is rumored to have issues. The others might improve nvme stability. * Disable wifi powersave * Clean up modules in the deviceinfo
2021-07-02 08:56:54 +00:00
wlan-powersave-off.start
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
"
build() {
devicepkg_build $startdir $pkgname
}
package() {
devicepkg_package $startdir $pkgname
install -D -m644 "$srcdir"/extlinux.conf \
"$pkgdir"/boot/extlinux/extlinux.conf
# Keyboard mapping
device-pine64-pinebookpro: trackpad and audio fixes (MR 1303) This adds a hwdb override for the trackpad that fixes the reported size, this fixes the acceleration profile and palm detection in libinput. Pulse now follows alsa paths for ucm files so the path for the rk3399 ucm has been updated to match.
2020-06-13 14:16:59 +00:00
install -D -m644 "$srcdir"/10-pinebookpro.hwdb \
"$pkgdir"/etc/udev/hwdb.d/10-pinebookpro.hwdb
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
# Sleep workaround
install -D -m644 "$srcdir"/mem_sleep.conf \
"$pkgdir"/etc/sysfs.d/mem_sleep.conf
# Alsa usecase manager config
device-pine64-pinebookpro: fix alsa ucm (MR 3203) [ci:skip-build]: already built successfully in CI
2022-06-06 14:51:45 +00:00
install -D -m644 "$srcdir"/HiFi \
"$pkgdir"/usr/share/alsa/ucm2/rockchip_es8316/HiFi
install -D -m644 "$srcdir"/rockchip,es8316-codec.conf \
"$pkgdir"/usr/share/alsa/ucm2/conf.d/simple-card/rockchip,es8316-codec.conf
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
pine64-pinebookpro: add service for setting low power state on boot (MR 2306) This adds a very basic openrc runscript that sets the power state on /dev/nvme0 to level 2, which seems(?) to be the lowest operational power state based on some cursory internet searching (and querying the nvme drives I have, Samsung EVO and Pro) The drive path is hard coded, but could be made configurable later on. I basically wanted to get something in pmaports quickly, since this power stuff is a major source of instability for me and probably others too who add nvme drives to this device.
2021-07-04 00:38:55 +00:00
install -D -m755 "$srcdir"/nvme-powersave.initd \
"$pkgdir"/etc/init.d/nvme-powersave
pine64-pinebookpro: changes for the 5.13 kernel (MR 2299) * Add the fusb302 module in initfs for the keyboard and touchpad * Add cmdline params for improving stability fw_devlink was switched on by default in kernel 5.13, and is rumored to have issues. The others might improve nvme stability. * Disable wifi powersave * Clean up modules in the deviceinfo
2021-07-02 08:56:54 +00:00
install -D -m755 "$srcdir"/wlan-powersave-off.start \
"$pkgdir"/etc/local.d/wlan-powersave-off.start
device-pine64-pinebookpro: add udev rule for setting backlight perm (MR 2374) There's a generic udev rule to set group ownership of backlights to 'video', but it only runs on the ADD action, which seems to be too late(?) since the backlight device is never owned by 'video' on boot. This rule will run on CHANGE too, which might be overkill but seems to get the job done. It's now possible to set the backlight brightness on the PBP as a normal user.
2021-07-21 21:37:38 +00:00
install -D -m644 "$srcdir"/70-edp-backlight.rules \
"$pkgdir"/usr/lib/udev/rules.d/70-edp-backlight.rules
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
}
nonfree_firmware() {
pkgdesc="Wifi, Bluetooth and video-out firmware"
depends="firmware-pine64-pinebookpro"
mkdir "$subpkgdir"
}
pine64-pinebookpro: add service for setting low power state on boot (MR 2306) This adds a very basic openrc runscript that sets the power state on /dev/nvme0 to level 2, which seems(?) to be the lowest operational power state based on some cursory internet searching (and querying the nvme drives I have, Samsung EVO and Pro) The drive path is hard coded, but could be made configurable later on. I basically wanted to get something in pmaports quickly, since this power stuff is a major source of instability for me and probably others too who add nvme drives to this device.
2021-07-04 00:38:55 +00:00
sha512sums="
device/*: remove empty variables (MR 2534) [ci:ignore-count] [ci:skip-vercheck] [ci:skip-build]: built all the device packages successfully in CI already
2021-09-18 17:06:03 +00:00
d748d300043b5f3d87af5ac4a7bb916b5af15186d30830273c2bb921cd67937b7bc4019505931c7152216d88d4043f89880c91a497713c510ba92c64ddc7830a deviceinfo
device-*: don't use 'flavor' in kernel/initramfs names (MR 2426) [ci:ignore-count] [ci:skip-build] too many changed kernels/packages, won't complete in CI
2021-08-17 07:03:20 +00:00
a24af007d87ec1b9108b4ca0fafa661a0c1298c8de97abeaeacb70283a1e797e8cd0caa41918e5f38e8e41c6195a1964b569f54cb4deca63d403b685455f118c extlinux.conf
device-pine64-pinebookpro: trackpad and audio fixes (MR 1303) This adds a hwdb override for the trackpad that fixes the reported size, this fixes the acceleration profile and palm detection in libinput. Pulse now follows alsa paths for ucm files so the path for the rk3399 ucm has been updated to match.
2020-06-13 14:16:59 +00:00
d3988fe83c54228d743f4a8c190e9530404a436a7fbc0b004bf20d3986b502d864717d8cc9c76812e599266bf84cb08f9a86e1bfd220875799c5a022aea588ec 10-pinebookpro.hwdb
device-pine64-pinebookpro: add udev rule for setting backlight perm (MR 2374) There's a generic udev rule to set group ownership of backlights to 'video', but it only runs on the ADD action, which seems to be too late(?) since the backlight device is never owned by 'video' on boot. This rule will run on CHANGE too, which might be overkill but seems to get the job done. It's now possible to set the backlight brightness on the PBP as a normal user.
2021-07-21 21:37:38 +00:00
6e9e9ef54ee9aa9491be6dc30451fdcd9038b0efeb959509f48626d97a1696ee81711a46510049557b73269ff48acc85fad6496c65451e2e24908241b7655444 70-edp-backlight.rules
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
bcae155e24a151d3c098833680b83b6004a329962f115480d560ebe19257eab87286b8a4c194e456c067ca54fb53e59a5a16b022cea13c11135b0855145db563 mem_sleep.conf
pine64-pinebookpro: add service for setting low power state on boot (MR 2306) This adds a very basic openrc runscript that sets the power state on /dev/nvme0 to level 2, which seems(?) to be the lowest operational power state based on some cursory internet searching (and querying the nvme drives I have, Samsung EVO and Pro) The drive path is hard coded, but could be made configurable later on. I basically wanted to get something in pmaports quickly, since this power stuff is a major source of instability for me and probably others too who add nvme drives to this device.
2021-07-04 00:38:55 +00:00
2abfa31fa56028339efc6d2b6cb838f310990d7110ac4dd996bc4cfcf90f0a8770e70f28f77f7b6929d110e494bc33731302f16b9717729f991c2732be0731d5 nvme-powersave.initd
pine64-pinebookpro: fix audio after 5.14 kernel upgrade (MR 2473) ucm2 paths changed after the kernel upgrade [ci:skip-build] already built successfully in CI
2021-08-31 03:09:58 +00:00
71a3ea790eedd02df2bcf2ba24cc41b376ad0a8a7d72b1ee2dd7a0f9d618243d214157046649583f790b388d8faef5a03fcd4306ff4a3319e418bb895be831bc rockchip,es8316-codec.conf
pine64-pinebookpro: add service for setting low power state on boot (MR 2306) This adds a very basic openrc runscript that sets the power state on /dev/nvme0 to level 2, which seems(?) to be the lowest operational power state based on some cursory internet searching (and querying the nvme drives I have, Samsung EVO and Pro) The drive path is hard coded, but could be made configurable later on. I basically wanted to get something in pmaports quickly, since this power stuff is a major source of instability for me and probably others too who add nvme drives to this device.
2021-07-04 00:38:55 +00:00
558f08b56425e0ceeea8d4815eeb862a2b801ba1b26b4dc28f4d0ec991ed9dfef14113172a224191eb2de5d0b57a741e4c48f1307bda2a69595944bd58731be1 HiFi
pine64-pinebookpro: changes for the 5.13 kernel (MR 2299) * Add the fusb302 module in initfs for the keyboard and touchpad * Add cmdline params for improving stability fw_devlink was switched on by default in kernel 5.13, and is rumored to have issues. The others might improve nvme stability. * Disable wifi powersave * Clean up modules in the deviceinfo
2021-07-02 08:56:54 +00:00
0fd7580e197e409978c219726af627cabe347404ee826e32892b61f3da1775b0fd81f8ed5e9a0f0bfaad87faa434d7a73ddaebf475ed0ad8fdcef6690cd692d3 wlan-powersave-off.start
pine64-pinebookpro: add service for setting low power state on boot (MR 2306) This adds a very basic openrc runscript that sets the power state on /dev/nvme0 to level 2, which seems(?) to be the lowest operational power state based on some cursory internet searching (and querying the nvme drives I have, Samsung EVO and Pro) The drive path is hard coded, but could be made configurable later on. I basically wanted to get something in pmaports quickly, since this power stuff is a major source of instability for me and probably others too who add nvme drives to this device.
2021-07-04 00:38:55 +00:00
"
Reference in a new issue Copy permalink