forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/testing/device-pine64-pinebookpro/APKBUILD

74 lines
2.5 KiB
Text
Raw Normal View History

device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-pine64-pinebookpro
pkgdesc="PINE64 Pinebook Pro"
pine64-pinebookpro: add service for setting low power state on boot (MR 2306) This adds a very basic openrc runscript that sets the power state on /dev/nvme0 to level 2, which seems(?) to be the lowest operational power state based on some cursory internet searching (and querying the nvme drives I have, Samsung EVO and Pro) The drive path is hard coded, but could be made configurable later on. I basically wanted to get something in pmaports quickly, since this power stuff is a major source of instability for me and probably others too who add nvme drives to this device.
2021-07-04 00:38:55 +00:00
pkgver=2
device/*: set gpu_accelerated for devices that show '3D=Y' on wiki (MR 2078) [ci:ignore-count] [ci:skip-vercheck] needed for the postmarketos-ui-* packages in this series [ci:skip-build] already built ui-* packages in CI, and device pacakges are just trivial deviceinfo change (manually built some just to verify)
2021-07-07 05:06:17 +00:00
pkgrel=1
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
url="https://postmarketos.org"
license="MIT"
arch="aarch64"
options="!check !archcheck"
pine64-pinebookpro: add service for setting low power state on boot (MR 2306) This adds a very basic openrc runscript that sets the power state on /dev/nvme0 to level 2, which seems(?) to be the lowest operational power state based on some cursory internet searching (and querying the nvme drives I have, Samsung EVO and Pro) The drive path is hard coded, but could be made configurable later on. I basically wanted to get something in pmaports quickly, since this power stuff is a major source of instability for me and probably others too who add nvme drives to this device.
2021-07-04 00:38:55 +00:00
depends="
alsa-ucm-conf
linux-postmarketos-rockchip
mesa-dri-gallium
nvme-cli
postmarketos-base
u-boot-pinebookpro
"
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
makedepends="devicepkg-dev"
subpackages="$pkgname-nonfree-firmware:nonfree_firmware"
pine64-pinebookpro: add service for setting low power state on boot (MR 2306) This adds a very basic openrc runscript that sets the power state on /dev/nvme0 to level 2, which seems(?) to be the lowest operational power state based on some cursory internet searching (and querying the nvme drives I have, Samsung EVO and Pro) The drive path is hard coded, but could be made configurable later on. I basically wanted to get something in pmaports quickly, since this power stuff is a major source of instability for me and probably others too who add nvme drives to this device.
2021-07-04 00:38:55 +00:00
install="$pkgname.post-install $pkgname.post-upgrade"
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
source="
deviceinfo
extlinux.conf
device-pine64-pinebookpro: trackpad and audio fixes (MR 1303) This adds a hwdb override for the trackpad that fixes the reported size, this fixes the acceleration profile and palm detection in libinput. Pulse now follows alsa paths for ucm files so the path for the rk3399 ucm has been updated to match.
2020-06-13 14:16:59 +00:00
10-pinebookpro.hwdb
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
mem_sleep.conf
pine64-pinebookpro: add service for setting low power state on boot (MR 2306) This adds a very basic openrc runscript that sets the power state on /dev/nvme0 to level 2, which seems(?) to be the lowest operational power state based on some cursory internet searching (and querying the nvme drives I have, Samsung EVO and Pro) The drive path is hard coded, but could be made configurable later on. I basically wanted to get something in pmaports quickly, since this power stuff is a major source of instability for me and probably others too who add nvme drives to this device.
2021-07-04 00:38:55 +00:00
nvme-powersave.initd
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
ucm/rockchip,es8316-codec.conf
ucm/HiFi
"
build() {
devicepkg_build $startdir $pkgname
}
package() {
devicepkg_package $startdir $pkgname
install -D -m644 "$srcdir"/extlinux.conf \
"$pkgdir"/boot/extlinux/extlinux.conf
# Keyboard mapping
device-pine64-pinebookpro: trackpad and audio fixes (MR 1303) This adds a hwdb override for the trackpad that fixes the reported size, this fixes the acceleration profile and palm detection in libinput. Pulse now follows alsa paths for ucm files so the path for the rk3399 ucm has been updated to match.
2020-06-13 14:16:59 +00:00
install -D -m644 "$srcdir"/10-pinebookpro.hwdb \
"$pkgdir"/etc/udev/hwdb.d/10-pinebookpro.hwdb
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
# Sleep workaround
install -D -m644 "$srcdir"/mem_sleep.conf \
"$pkgdir"/etc/sysfs.d/mem_sleep.conf
# Alsa usecase manager config
install -D -m644 "$srcdir"/rockchip,es8316-codec.conf \
device-pine64-pinebookpro: trackpad and audio fixes (MR 1303) This adds a hwdb override for the trackpad that fixes the reported size, this fixes the acceleration profile and palm detection in libinput. Pulse now follows alsa paths for ucm files so the path for the rk3399 ucm has been updated to match.
2020-06-13 14:16:59 +00:00
"$pkgdir"/usr/share/alsa/ucm2/rockchip_es8316/rockchip,es8316-codec.conf
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
install -D -m644 "$srcdir"/HiFi \
device-pine64-pinebookpro: trackpad and audio fixes (MR 1303) This adds a hwdb override for the trackpad that fixes the reported size, this fixes the acceleration profile and palm detection in libinput. Pulse now follows alsa paths for ucm files so the path for the rk3399 ucm has been updated to match.
2020-06-13 14:16:59 +00:00
"$pkgdir"/usr/share/alsa/ucm2/rockchip_es8316/HiFi
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
pine64-pinebookpro: add service for setting low power state on boot (MR 2306) This adds a very basic openrc runscript that sets the power state on /dev/nvme0 to level 2, which seems(?) to be the lowest operational power state based on some cursory internet searching (and querying the nvme drives I have, Samsung EVO and Pro) The drive path is hard coded, but could be made configurable later on. I basically wanted to get something in pmaports quickly, since this power stuff is a major source of instability for me and probably others too who add nvme drives to this device.
2021-07-04 00:38:55 +00:00
install -D -m755 "$srcdir"/nvme-powersave.initd \
"$pkgdir"/etc/init.d/nvme-powersave
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
}
nonfree_firmware() {
pkgdesc="Wifi, Bluetooth and video-out firmware"
depends="firmware-pine64-pinebookpro"
mkdir "$subpkgdir"
}
pine64-pinebookpro: add service for setting low power state on boot (MR 2306) This adds a very basic openrc runscript that sets the power state on /dev/nvme0 to level 2, which seems(?) to be the lowest operational power state based on some cursory internet searching (and querying the nvme drives I have, Samsung EVO and Pro) The drive path is hard coded, but could be made configurable later on. I basically wanted to get something in pmaports quickly, since this power stuff is a major source of instability for me and probably others too who add nvme drives to this device.
2021-07-04 00:38:55 +00:00
sha512sums="
device/*: set gpu_accelerated for devices that show '3D=Y' on wiki (MR 2078) [ci:ignore-count] [ci:skip-vercheck] needed for the postmarketos-ui-* packages in this series [ci:skip-build] already built ui-* packages in CI, and device pacakges are just trivial deviceinfo change (manually built some just to verify)
2021-07-07 05:06:17 +00:00
25c5b71848d5bb956697ecf2be43079a448c8c0a67952e09f5738223d8b024aa4ff0495c396f94aacf0d607168d70a5812be41381e45645f95723c0cdef9515c deviceinfo
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
cdcb1d36440c29d411691990c1170d9665b13b1c551b35825720d23b6ae40311ce91c3b2b7a089deaacd7a33c6febe4f81dc75d71dd4bed887291221d56dc1d2 extlinux.conf
device-pine64-pinebookpro: trackpad and audio fixes (MR 1303) This adds a hwdb override for the trackpad that fixes the reported size, this fixes the acceleration profile and palm detection in libinput. Pulse now follows alsa paths for ucm files so the path for the rk3399 ucm has been updated to match.
2020-06-13 14:16:59 +00:00
d3988fe83c54228d743f4a8c190e9530404a436a7fbc0b004bf20d3986b502d864717d8cc9c76812e599266bf84cb08f9a86e1bfd220875799c5a022aea588ec 10-pinebookpro.hwdb
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
bcae155e24a151d3c098833680b83b6004a329962f115480d560ebe19257eab87286b8a4c194e456c067ca54fb53e59a5a16b022cea13c11135b0855145db563 mem_sleep.conf
pine64-pinebookpro: add service for setting low power state on boot (MR 2306) This adds a very basic openrc runscript that sets the power state on /dev/nvme0 to level 2, which seems(?) to be the lowest operational power state based on some cursory internet searching (and querying the nvme drives I have, Samsung EVO and Pro) The drive path is hard coded, but could be made configurable later on. I basically wanted to get something in pmaports quickly, since this power stuff is a major source of instability for me and probably others too who add nvme drives to this device.
2021-07-04 00:38:55 +00:00
2abfa31fa56028339efc6d2b6cb838f310990d7110ac4dd996bc4cfcf90f0a8770e70f28f77f7b6929d110e494bc33731302f16b9717729f991c2732be0731d5 nvme-powersave.initd
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
846384cab3e9581a03007cf4f39f8538315e804d1573903dd223d22d5ca0b6f260e348467aead5124689288fb7d2ec22c1e9aba8e89683efdbd33ddfe10de852 rockchip,es8316-codec.conf
pine64-pinebookpro: add service for setting low power state on boot (MR 2306) This adds a very basic openrc runscript that sets the power state on /dev/nvme0 to level 2, which seems(?) to be the lowest operational power state based on some cursory internet searching (and querying the nvme drives I have, Samsung EVO and Pro) The drive path is hard coded, but could be made configurable later on. I basically wanted to get something in pmaports quickly, since this power stuff is a major source of instability for me and probably others too who add nvme drives to this device.
2021-07-04 00:38:55 +00:00
558f08b56425e0ceeea8d4815eeb862a2b801ba1b26b4dc28f4d0ec991ed9dfef14113172a224191eb2de5d0b57a741e4c48f1307bda2a69595944bd58731be1 HiFi
"
Reference in a new issue Copy permalink