pmaports/main/linux-postmarketos-stable/APKBUILD

187 lines
5.5 KiB
Text
Raw Normal View History

_flavor=postmarketos-stable
_hash="7b6fbfd899b4133e4f789843e5967beb139ec4d2"
_config="config-${_flavor}.${CARCH}"
pkgname=linux-${_flavor}
pkgver=4.13.12
case $pkgver in
*.*.*) _kernver=${pkgver%.*};;
*.*) _kernver=$pkgver;;
esac
Close #453: Support mesa-dri-virtio in Qemu (#861) The mesa driver, which ends up in the installation image, needs to be known before the installation is done (in other words: when running the qemu action, it is to late as the image has already been generated). That's why one can choose the Qemu mesa driver in `pmbootstrap init` now: ``` Device [qemu-amd64]: Which mesa driver do you prefer for your Qemu device? Only select something other than the default if you are having graphical problems (such as glitches). Mesa driver (dri-swrast/dri-virtio) [dri-virtio]: ``` It is still possible to select `dri-swrast`, because `dri-virtio` may not work in all cases, and that way we could easily debug it or experiment with other mesa drivers (e.g. the "vmware" one, which is supported by mesa and Qemu). Other changes: * `pmbootstrap qemu` accepts a `--display` variable now, which passes the value directly to `qemu`'s `display` option. It defaults to `sdl,gl=on` (@PureTryOut reported that to work best with plasma mobile on his PC). `--display` and `--spice` (which is still working) are mutually exclusive. * Removed obsolete telnet port pass-through: We only use the debug telnet port since osk-sdl has been merged. * Add show-cursor to the Qemu command line, so it shows a cursor in X11 * Refactored the spice code (`command_spice` only returns the spice command, because it has all necessary information already) and the spice port can be specified on the commandline now (previously it was hardcoded in one place and then always looked up from there). * Start comments with capital letters. * Keep the log on the screen a bit shorter (e.g. Qemu command is written to the "pmbootstrap log" anyway, so there's no need to display it again). * linux-postmarketos-stable: Adjust kernel configs x86_64, armhf: enable as modules: CONFIG_DRM_VIRTIO_GPU, CONFIG_VIRTIO_PCI, CONFIG_VIRTIO_BALLOON aarch64: all 3 options were already enabled as built-in (no change) * Set '-vga virtio' for mesa-dri-virtio
2017-11-05 13:48:49 +00:00
pkgrel=1
arch="all"
pkgdesc="Linux for pmOS supported chipsets (stable)"
url="https://kernel.org/"
depends="postmarketos-mkinitfs"
makedepends="perl sed installkernel bash gmp-dev bc linux-headers elfutils-dev"
options="!strip !check !tracedeps"
install=
source="
https://cdn.kernel.org/pub/linux/kernel/v${pkgver%%.*}.x/linux-$_kernver.tar.xz
config-${_flavor}.armhf
Close #226: Launch postmarketOS in a qemu virtual machine (#350) Thanks to Pablo Castellano and Martijn Braam! In postmarketOS we are now able to generate system images with the correct configuration so that they can boot already using qemu This commit brings the `pmbootstrap qemu` action. This command is very handy because you don't have to set all the qemu parameters, pmbootstrap does it for you. * device-qemu-vexpress: Added kernel command line according to wiki * qemu: Added workaround for image writing permissions * qemu: Added support to launch postmarketOS in a QEMU virtual machine - Support for emulating these architectures in QEMU: arm, aarch64, x86_84 - Generate QEMU command correctly depending no guest architecture (arm/x86) - Run QEMU in the same architecture as the host by default - Refactoring in pmb.parse.arch and pmb.qemu.run - Raise exception if DTB file or system image are not present - Display more useful information when something fails (e.g. image not found) - Run qemu version depending on arch (host or argument), not device configured * device-qemu-amd64: set deviceinfo_kernel_cmdline to "PMOS_NO_OUTPUT_REDIRECT" * qemu: added --memory argument to specific guest RAM * device-qemu-amd64: adjusted deviceinfo_kernel_cmdline (console=tty1) * Added /etc/network/interfaces for qemu-amd64 * qemu: Added KVM support if /dev/kvm if present * Specify separate machines for architecture * qemu: Check if QEMU is installed instead of crashing * Added graphics driver to qemu-aarch64 - Use arm (as used in qemu) instead of armhf (used in Alpine) - qemu argument is -dtb - Follow same style to build the command + arguments * qemu: Added SSH port redirection: ./pmbootstrap.py qemu -p 2222
2017-08-09 20:26:40 +00:00
config-${_flavor}.aarch64
config-${_flavor}.x86_64
0001-rx51-drm-regression-workaround.patch
"
if [ "${pkgver%.0}" = "$pkgver" ]; then
source="$source
https://cdn.kernel.org/pub/linux/kernel/v${pkgver%%.*}.x/patch-$pkgver.xz"
fi
subpackages="$pkgname-dev::$CBUILD_ARCH"
license="GPL2"
_abi_release=${pkgver}
_carch=${CARCH}
case "$_carch" in
aarch64*) _carch="arm64" ;;
arm*) _carch="arm" ;;
ppc*) _carch="powerpc" ;;
s390*) _carch="s390" ;;
esac
HOSTCC="${CC:-gcc}"
HOSTCC="${HOSTCC#${CROSS_COMPILE}}"
ksrcdir="$srcdir/linux-$_kernver"
prepare() {
local _patch_failed=
cd "$ksrcdir"
if [ "$_kernver" != "$pkgver" ]; then
msg "Applying patch-$pkgver.xz"
unxz -c < "$srcdir"/patch-$pkgver.xz | patch -p1 -N
fi
# first apply patches in specified order
for i in $source; do
case $i in
*.patch)
msg "Applying $i..."
if ! patch -s -p1 -N -i "$srcdir"/$i; then
echo $i >>failed
_patch_failed=1
fi
;;
esac
done
if ! [ -z "$_patch_failed" ]; then
error "The following patches failed:"
cat failed
return 1
fi
mkdir -p "$srcdir"/build
cp -v "$srcdir"/$_config "$srcdir"/build/.config
make -C "$ksrcdir" O="$srcdir"/build ARCH="$_carch" HOSTCC="$HOSTCC" \
olddefconfig
}
# this is so we can do: 'abuild menuconfig' to reconfigure kernel
menuconfig() {
cd "$srcdir"/build
make ARCH="$_carch" menuconfig
cp .config "$startdir"/$_config
}
build() {
cd "$srcdir"/build
unset LDFLAGS
make ARCH="$_carch" CC="${CC:-gcc}" \
KBUILD_BUILD_VERSION="$((pkgrel + 1 ))-postmarketOS" \
CFLAGS_MODULE=-fno-pic
}
package() {
cd "$srcdir/build/arch/${_carch}/boot"
Close #226: Launch postmarketOS in a qemu virtual machine (#350) Thanks to Pablo Castellano and Martijn Braam! In postmarketOS we are now able to generate system images with the correct configuration so that they can boot already using qemu This commit brings the `pmbootstrap qemu` action. This command is very handy because you don't have to set all the qemu parameters, pmbootstrap does it for you. * device-qemu-vexpress: Added kernel command line according to wiki * qemu: Added workaround for image writing permissions * qemu: Added support to launch postmarketOS in a QEMU virtual machine - Support for emulating these architectures in QEMU: arm, aarch64, x86_84 - Generate QEMU command correctly depending no guest architecture (arm/x86) - Run QEMU in the same architecture as the host by default - Refactoring in pmb.parse.arch and pmb.qemu.run - Raise exception if DTB file or system image are not present - Display more useful information when something fails (e.g. image not found) - Run qemu version depending on arch (host or argument), not device configured * device-qemu-amd64: set deviceinfo_kernel_cmdline to "PMOS_NO_OUTPUT_REDIRECT" * qemu: added --memory argument to specific guest RAM * device-qemu-amd64: adjusted deviceinfo_kernel_cmdline (console=tty1) * Added /etc/network/interfaces for qemu-amd64 * qemu: Added KVM support if /dev/kvm if present * Specify separate machines for architecture * qemu: Check if QEMU is installed instead of crashing * Added graphics driver to qemu-aarch64 - Use arm (as used in qemu) instead of armhf (used in Alpine) - qemu argument is -dtb - Follow same style to build the command + arguments * qemu: Added SSH port redirection: ./pmbootstrap.py qemu -p 2222
2017-08-09 20:26:40 +00:00
if [ "$CARCH" == "aarch64" ]; then
install -Dm644 "$srcdir/build/arch/${_carch}/boot/Image" \
"$pkgdir/boot/vmlinuz-$_flavor"
else
install -Dm644 "$srcdir/build/arch/${_carch}/boot/"*zImage \
"$pkgdir/boot/vmlinuz-$_flavor"
fi
install -D "$srcdir/build/include/config/kernel.release" \
"$pkgdir/usr/share/kernel/$_flavor/kernel.release"
cd "$srcdir"/build
local _install
case "$CARCH" in
aarch64*|arm*) _install="modules_install dtbs_install" ;;
*) _install="modules_install" ;;
esac
make -j1 $_install \
ARCH="$_carch" \
INSTALL_MOD_PATH="$pkgdir" \
INSTALL_DTBS_PATH="$pkgdir/usr/share/dtb"
}
dev() {
# copy the only the parts that we really need for build 3rd party
# kernel modules and install those as /usr/src/linux-headers,
# simlar to what ubuntu does
#
# this way you dont need to install the 300-400 kernel sources to
# build a tiny kernel module
#
pkgdesc="Headers and script for third party modules for postmarketos kernel"
depends="gmp-dev bash perl"
local dir="$subpkgdir"/usr/src/linux-headers-${_abi_release}
# first we import config, run prepare to set up for building
# external modules, and create the scripts
mkdir -p "$dir"
cp "$srcdir"/$_config "$dir"/.config
make -j1 -C "$srcdir"/linux-$_kernver O="$dir" ARCH="$_carch" HOSTCC="$HOSTCC" \
olddefconfig prepare modules_prepare scripts
# needed for 3rd party modules
# https://bugzilla.kernel.org/show_bug.cgi?id=11143
case "$CARCH" in
ppc*) (cd "$dir" && make arch/powerpc/lib/crtsavres.o);;
esac
# remove the stuff that points to real sources. we want 3rd party
# modules to believe this is the soruces
rm "$dir"/Makefile "$dir"/source
# copy the needed stuff from real sources
#
# this is taken from ubuntu kernel build script
# http://kernel.ubuntu.com/git/ubuntu/ubuntu-zesty.git/tree/debian/rules.d/3-binary-indep.mk
cd "$srcdir"/linux-$_kernver
find . -path './include/*' -prune \
-o -path './scripts/*' -prune -o -type f \
\( -name 'Makefile*' -o -name 'Kconfig*' -o -name 'Kbuild*' -o \
-name '*.sh' -o -name '*.pl' -o -name '*.lds' \) \
-print | cpio -pdm "$dir"
cp -a scripts include "$dir"
find $(find arch -name include -type d -print) -type f \
| cpio -pdm "$dir"
install -Dm644 "$srcdir"/build/Module.symvers \
"$dir"/Module.symvers
mkdir -p "$subpkgdir"/lib/modules/${_abi_release}
ln -sf /usr/src/linux-headers-${_abi_release} \
"$subpkgdir"/lib/modules/${_abi_release}/build
}
sha512sums="a557c2f0303ae618910b7106ff63d9978afddf470f03cb72aa748213e099a0ecd5f3119aea6cbd7b61df30ca6ef3ec57044d524b7babbaabddf8b08b8bafa7d2 linux-4.13.tar.xz
Close #453: Support mesa-dri-virtio in Qemu (#861) The mesa driver, which ends up in the installation image, needs to be known before the installation is done (in other words: when running the qemu action, it is to late as the image has already been generated). That's why one can choose the Qemu mesa driver in `pmbootstrap init` now: ``` Device [qemu-amd64]: Which mesa driver do you prefer for your Qemu device? Only select something other than the default if you are having graphical problems (such as glitches). Mesa driver (dri-swrast/dri-virtio) [dri-virtio]: ``` It is still possible to select `dri-swrast`, because `dri-virtio` may not work in all cases, and that way we could easily debug it or experiment with other mesa drivers (e.g. the "vmware" one, which is supported by mesa and Qemu). Other changes: * `pmbootstrap qemu` accepts a `--display` variable now, which passes the value directly to `qemu`'s `display` option. It defaults to `sdl,gl=on` (@PureTryOut reported that to work best with plasma mobile on his PC). `--display` and `--spice` (which is still working) are mutually exclusive. * Removed obsolete telnet port pass-through: We only use the debug telnet port since osk-sdl has been merged. * Add show-cursor to the Qemu command line, so it shows a cursor in X11 * Refactored the spice code (`command_spice` only returns the spice command, because it has all necessary information already) and the spice port can be specified on the commandline now (previously it was hardcoded in one place and then always looked up from there). * Start comments with capital letters. * Keep the log on the screen a bit shorter (e.g. Qemu command is written to the "pmbootstrap log" anyway, so there's no need to display it again). * linux-postmarketos-stable: Adjust kernel configs x86_64, armhf: enable as modules: CONFIG_DRM_VIRTIO_GPU, CONFIG_VIRTIO_PCI, CONFIG_VIRTIO_BALLOON aarch64: all 3 options were already enabled as built-in (no change) * Set '-vga virtio' for mesa-dri-virtio
2017-11-05 13:48:49 +00:00
e5d49d01241ff535e23e69b57dfaf76e5efdd1abb47e549ef136bd2ef4739f45d9ac132d519747bb628a5be2ce9b94adde4cfc2c0efe8dbfcadba7560b556970 config-postmarketos-stable.armhf
be4737b72bdf1f79f1713f465275bc8465b08fac351a4f3e92e05605fa280b0b41a1449defec07653e11837df82a17b1e8b93a279a7c8c03412817fd6ac1c7d7 config-postmarketos-stable.aarch64
3cc4620dee3fe91214e2bcb24b2df69b6fba187b6574b06365f59de1af6a2b45ac4d4978413d38bc82a74fa31422096687b9288c226ebb7433c2ff13866213b6 config-postmarketos-stable.x86_64
17c48bb7b4218297bd2be6faa5b6570ce1560a33385237a9962c0884d782c9a722a25a30077b6721d2943a9b98c29dcad6adfef718b0163c559c19a79519319b 0001-rx51-drm-regression-workaround.patch
6ae0b61bcd62b2e90b8ef3e1030fa874aba95317ec559d6e72cbd83a21b3894c05210d2da137f7b4db063d7de52193260b2364ceb43538ab8cd1db78070efb34 patch-4.13.12.xz"