forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/testing/device-asus-grouper/APKBUILD

53 lines
1.5 KiB
Text
Raw Normal View History

asus-grouper: bump to mainline + firmware adaptation (!933) - use mesa-git (until we have functional mesa-grate-git) Works: - USB - WiFi (tested with IWD) + Bluetooth - Touchscreen - Phosh rotation (rootston.ini) - IIO Light sensor - NFC Not works: - 3D - GPS - GSM (tilapia) - Camera Signed-off-by: David Heidelberg <david@ixit.cz> [ci:skip-build]: already built successfully in CI
2019-12-22 17:23:03 +00:00
# Maintainer: David Heidelberg <david@ixit.cz>
*: remove quotes around pkgname (MR 1186) TP:[AL3]:APKBUILD:5:pkgname must not be quoted [skip ci]: won't finish within 3 hours
2020-04-25 09:51:42 +00:00
pkgname=device-asus-grouper
device/device-asus-grouper: switch from tilapia back to grouper (!1025) Signed-off-by: David Heidelberg <david@ixit.cz>
2020-03-03 10:43:27 +00:00
pkgdesc="Google Nexus 7 2012 (grouper)"
device/testing/device-asus-grouper: add kernel variants (MR 1532) - E1565 is original "grouper" and it's for modern devices similar to tilapia - PM269 is earlier produced Nexuses with different PMIC (not very often seen) Closes: https://gitlab.com/postmarketOS/pmaports/-/issues/647
2020-09-02 14:55:07 +00:00
pkgver=3
pkgrel=0
Remove github.com references * Travis and Coveralls badges * aports: instead of <https://github.com/postmarketOS>, use <https://postmarketos.org> * References to full URLs to issues and pull requests replaced with a hash and the number * grsec check: simplify error message, remove link to github issue (nobody is using that anymore anyway)
2018-06-30 07:00:48 +00:00
url="https://postmarketos.org"
Add asus-grouper (#180)
2017-07-20 16:05:33 +00:00
license="MIT"
asus-grouper: bump to mainline + firmware adaptation (!933) - use mesa-git (until we have functional mesa-grate-git) Works: - USB - WiFi (tested with IWD) + Bluetooth - Touchscreen - Phosh rotation (rootston.ini) - IIO Light sensor - NFC Not works: - 3D - GPS - GSM (tilapia) - Camera Signed-off-by: David Heidelberg <david@ixit.cz> [ci:skip-build]: already built successfully in CI
2019-12-22 17:23:03 +00:00
arch="armv7"
asus-grouper: modernize device package (!253) Updated the device-asus-grouper package to use devicepkg-dev. I've tested the resulting image and it builds, boots and has a working touchscreen (in Weston) I've also noticed that the device reboots itself at times, both in the USB ssh console and in Weston. This seems to be a known issue but I don't know how prevalent it was before.
2019-03-03 23:15:40 +00:00
options="!check !archcheck"
device/testing/device-asus-grouper: add kernel variants (MR 1532) - E1565 is original "grouper" and it's for modern devices similar to tilapia - PM269 is earlier produced Nexuses with different PMIC (not very often seen) Closes: https://gitlab.com/postmarketOS/pmaports/-/issues/647
2020-09-02 14:55:07 +00:00
depends="postmarketos-base mkbootimg mesa-dri-gallium"
asus-grouper: modernize device package (!253) Updated the device-asus-grouper package to use devicepkg-dev. I've tested the resulting image and it builds, boots and has a working touchscreen (in Weston) I've also noticed that the device reboots itself at times, both in the USB ssh console and in Weston. This seems to be a known issue but I don't know how prevalent it was before.
2019-03-03 23:15:40 +00:00
makedepends="devicepkg-dev"
asus-grouper: bump to mainline + firmware adaptation (!933) - use mesa-git (until we have functional mesa-grate-git) Works: - USB - WiFi (tested with IWD) + Bluetooth - Touchscreen - Phosh rotation (rootston.ini) - IIO Light sensor - NFC Not works: - 3D - GPS - GSM (tilapia) - Camera Signed-off-by: David Heidelberg <david@ixit.cz> [ci:skip-build]: already built successfully in CI
2019-12-22 17:23:03 +00:00
subpackages="$pkgname-phosh
device/testing/device-asus-grouper: add kernel variants (MR 1532) - E1565 is original "grouper" and it's for modern devices similar to tilapia - PM269 is earlier produced Nexuses with different PMIC (not very often seen) Closes: https://gitlab.com/postmarketOS/pmaports/-/issues/647
2020-09-02 14:55:07 +00:00
$pkgname-kernel-e1565:kernel_e1565
$pkgname-kernel-pm269:kernel_pm269
$pkgname-nonfree-firmware:nonfree_firmware"
[grouper] Add osk-sdl config for device (#670)
2017-11-18 17:42:37 +00:00
source="deviceinfo
asus-grouper: bump to mainline + firmware adaptation (!933) - use mesa-git (until we have functional mesa-grate-git) Works: - USB - WiFi (tested with IWD) + Bluetooth - Touchscreen - Phosh rotation (rootston.ini) - IIO Light sensor - NFC Not works: - 3D - GPS - GSM (tilapia) - Camera Signed-off-by: David Heidelberg <david@ixit.cz> [ci:skip-build]: already built successfully in CI
2019-12-22 17:23:03 +00:00
rootston.ini"
asus-grouper: modernize device package (!253) Updated the device-asus-grouper package to use devicepkg-dev. I've tested the resulting image and it builds, boots and has a working touchscreen (in Weston) I've also noticed that the device reboots itself at times, both in the USB ssh console and in Weston. This seems to be a known issue but I don't know how prevalent it was before.
2019-03-03 23:15:40 +00:00
build() {
devicepkg_build $startdir $pkgname
}
Add asus-grouper (#180)
2017-07-20 16:05:33 +00:00
package() {
asus-grouper: modernize device package (!253) Updated the device-asus-grouper package to use devicepkg-dev. I've tested the resulting image and it builds, boots and has a working touchscreen (in Weston) I've also noticed that the device reboots itself at times, both in the USB ssh console and in Weston. This seems to be a known issue but I don't know how prevalent it was before.
2019-03-03 23:15:40 +00:00
devicepkg_package $startdir $pkgname
asus-grouper: bump to mainline + firmware adaptation (!933) - use mesa-git (until we have functional mesa-grate-git) Works: - USB - WiFi (tested with IWD) + Bluetooth - Touchscreen - Phosh rotation (rootston.ini) - IIO Light sensor - NFC Not works: - 3D - GPS - GSM (tilapia) - Camera Signed-off-by: David Heidelberg <david@ixit.cz> [ci:skip-build]: already built successfully in CI
2019-12-22 17:23:03 +00:00
}
phosh() {
install_if="$pkgname postmarketos-ui-phosh"
install -Dm644 "$srcdir"/rootston.ini \
"$subpkgdir"/etc/phosh/rootston.ini
Add asus-grouper (#180)
2017-07-20 16:05:33 +00:00
}
device/testing/device-asus-grouper: add kernel variants (MR 1532) - E1565 is original "grouper" and it's for modern devices similar to tilapia - PM269 is earlier produced Nexuses with different PMIC (not very often seen) Closes: https://gitlab.com/postmarketOS/pmaports/-/issues/647
2020-09-02 14:55:07 +00:00
kernel_e1565() {
pkgdesc="Mainline kernel for HW rev. E1565 (newer devices)"
depends="linux-asus-grouper"
devicepkg_subpackage_kernel $startdir $pkgname $subpkgname
}
kernel_pm269() {
pkgdesc="Mainline kernel for HW rev. PM269 (older devices)"
depends="linux-asus-grouper"
devicepkg_subpackage_kernel $startdir $pkgname $subpkgname
}
asus-grouper: create nonfree firmware subpackage (!252) With this firmware I can connect to my AP using wpa_supplicant, ping servers and fetch files normally. However the driver also brings up the p2p0 interface on boot and it seems to conflict with wlan0. So to test the wireless we need to disable p2p0 and stop the wpa_supplicant service (because it attaches itself to p2p0 on boot): $ sudo ip link set p2p0 down $ sudo rc-service wpa_supplicant stop $ wpa_passphrase <your ESSID> <your password> > ./wpa_config $ sudo wpa_supplicant -B -Dnl80211 -iwlan0 -c./wpa_config $ sudo udhcpc -i wlan0 $ ping postmarketos.org PING postmarketos.org (188.166.143.8): 56 data bytes 64 bytes from 188.166.143.8: seq=0 ttl=42 time=41.604 ms 64 bytes from 188.166.143.8: seq=1 ttl=42 time=56.022 ms 64 bytes from 188.166.143.8: seq=2 ttl=42 time=54.911 ms 64 bytes from 188.166.143.8: seq=3 ttl=42 time=54.241 ms ... $ sudo apk update fetch http://postmarketos.brixit.nl/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/main/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/community/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/testing/armhf/APKINDEX.tar.gz v20190228-49-gbc0f9441b0 [http://dl-cdn.alpinelinux.org/alpine/edge/main] v20190228-41-g6ee930cc6c [http://dl-cdn.alpinelinux.org/alpine/edge/community] v20190228-48-g67283cdbf6 [http://dl-cdn.alpinelinux.org/alpine/edge/testing] OK: 13694 distinct packages available
2019-03-03 18:57:07 +00:00
nonfree_firmware() {
asus-grouper: bump to mainline + firmware adaptation (!933) - use mesa-git (until we have functional mesa-grate-git) Works: - USB - WiFi (tested with IWD) + Bluetooth - Touchscreen - Phosh rotation (rootston.ini) - IIO Light sensor - NFC Not works: - 3D - GPS - GSM (tilapia) - Camera Signed-off-by: David Heidelberg <david@ixit.cz> [ci:skip-build]: already built successfully in CI
2019-12-22 17:23:03 +00:00
pkgdesc="Google Nexus 7 (2012) WiFi & BT firmware"
depends="firmware-asus-grouper firmware-aosp-broadcom-wlan-mainline"
asus-grouper: update kernel wifi firmware path (!252) [ci:skip-build]: already built successfully in CI
2019-03-03 18:59:11 +00:00
mkdir "$subpkgdir"
asus-grouper: create nonfree firmware subpackage (!252) With this firmware I can connect to my AP using wpa_supplicant, ping servers and fetch files normally. However the driver also brings up the p2p0 interface on boot and it seems to conflict with wlan0. So to test the wireless we need to disable p2p0 and stop the wpa_supplicant service (because it attaches itself to p2p0 on boot): $ sudo ip link set p2p0 down $ sudo rc-service wpa_supplicant stop $ wpa_passphrase <your ESSID> <your password> > ./wpa_config $ sudo wpa_supplicant -B -Dnl80211 -iwlan0 -c./wpa_config $ sudo udhcpc -i wlan0 $ ping postmarketos.org PING postmarketos.org (188.166.143.8): 56 data bytes 64 bytes from 188.166.143.8: seq=0 ttl=42 time=41.604 ms 64 bytes from 188.166.143.8: seq=1 ttl=42 time=56.022 ms 64 bytes from 188.166.143.8: seq=2 ttl=42 time=54.911 ms 64 bytes from 188.166.143.8: seq=3 ttl=42 time=54.241 ms ... $ sudo apk update fetch http://postmarketos.brixit.nl/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/main/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/community/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/testing/armhf/APKINDEX.tar.gz v20190228-49-gbc0f9441b0 [http://dl-cdn.alpinelinux.org/alpine/edge/main] v20190228-41-g6ee930cc6c [http://dl-cdn.alpinelinux.org/alpine/edge/community] v20190228-48-g67283cdbf6 [http://dl-cdn.alpinelinux.org/alpine/edge/testing] OK: 13694 distinct packages available
2019-03-03 18:57:07 +00:00
}
asus-grouper: modernize device package (!253) Updated the device-asus-grouper package to use devicepkg-dev. I've tested the resulting image and it builds, boots and has a working touchscreen (in Weston) I've also noticed that the device reboots itself at times, both in the USB ssh console and in Weston. This seems to be a known issue but I don't know how prevalent it was before.
2019-03-03 23:15:40 +00:00
device/testing/device-asus-grouper: add kernel variants (MR 1532) - E1565 is original "grouper" and it's for modern devices similar to tilapia - PM269 is earlier produced Nexuses with different PMIC (not very often seen) Closes: https://gitlab.com/postmarketOS/pmaports/-/issues/647
2020-09-02 14:55:07 +00:00
sha512sums="44b7f4fda803b64802fb562b08d6ec8eb249959c4ca7b29aaa6b2248b42bfda876aa721987bc3385993e7f3fb70fe48e8dd4fdaa23a343bfb499cf0a20635a31 deviceinfo
asus-grouper: bump to mainline + firmware adaptation (!933) - use mesa-git (until we have functional mesa-grate-git) Works: - USB - WiFi (tested with IWD) + Bluetooth - Touchscreen - Phosh rotation (rootston.ini) - IIO Light sensor - NFC Not works: - 3D - GPS - GSM (tilapia) - Camera Signed-off-by: David Heidelberg <david@ixit.cz> [ci:skip-build]: already built successfully in CI
2019-12-22 17:23:03 +00:00
6ec993e278d2a73c72fb96f001716ded63543d99183847d22d172cd81ac410791c79370ecf391d0c24822c975d91b84dc1db296e1b28dbf66d5c227bff8d4011 rootston.ini"
Reference in a new issue Copy permalink