forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/device-asus-grouper/APKBUILD

38 lines
1.2 KiB
Text
Raw Normal View History

asus-grouper: modernize device package (!253) Updated the device-asus-grouper package to use devicepkg-dev. I've tested the resulting image and it builds, boots and has a working touchscreen (in Weston) I've also noticed that the device reboots itself at times, both in the USB ssh console and in Weston. This seems to be a known issue but I don't know how prevalent it was before.
2019-03-03 23:15:40 +00:00
# Reference: <https://postmarketos.org/devicepkg>
pkgname="device-asus-grouper"
pkgdesc="Google Nexus 7 2012 Wifi"
pkgver=2
asus-grouper: create nonfree firmware subpackage (!252) With this firmware I can connect to my AP using wpa_supplicant, ping servers and fetch files normally. However the driver also brings up the p2p0 interface on boot and it seems to conflict with wlan0. So to test the wireless we need to disable p2p0 and stop the wpa_supplicant service (because it attaches itself to p2p0 on boot): $ sudo ip link set p2p0 down $ sudo rc-service wpa_supplicant stop $ wpa_passphrase <your ESSID> <your password> > ./wpa_config $ sudo wpa_supplicant -B -Dnl80211 -iwlan0 -c./wpa_config $ sudo udhcpc -i wlan0 $ ping postmarketos.org PING postmarketos.org (188.166.143.8): 56 data bytes 64 bytes from 188.166.143.8: seq=0 ttl=42 time=41.604 ms 64 bytes from 188.166.143.8: seq=1 ttl=42 time=56.022 ms 64 bytes from 188.166.143.8: seq=2 ttl=42 time=54.911 ms 64 bytes from 188.166.143.8: seq=3 ttl=42 time=54.241 ms ... $ sudo apk update fetch http://postmarketos.brixit.nl/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/main/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/community/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/testing/armhf/APKINDEX.tar.gz v20190228-49-gbc0f9441b0 [http://dl-cdn.alpinelinux.org/alpine/edge/main] v20190228-41-g6ee930cc6c [http://dl-cdn.alpinelinux.org/alpine/edge/community] v20190228-48-g67283cdbf6 [http://dl-cdn.alpinelinux.org/alpine/edge/testing] OK: 13694 distinct packages available
2019-03-03 18:57:07 +00:00
pkgrel=1
Remove github.com references * Travis and Coveralls badges * aports: instead of <https://github.com/postmarketOS>, use <https://postmarketos.org> * References to full URLs to issues and pull requests replaced with a hash and the number * grsec check: simplify error message, remove link to github issue (nobody is using that anymore anyway)
2018-06-30 07:00:48 +00:00
url="https://postmarketos.org"
Add asus-grouper (#180)
2017-07-20 16:05:33 +00:00
license="MIT"
asus-grouper: modernize device package (!253) Updated the device-asus-grouper package to use devicepkg-dev. I've tested the resulting image and it builds, boots and has a working touchscreen (in Weston) I've also noticed that the device reboots itself at times, both in the USB ssh console and in Weston. This seems to be a known issue but I don't know how prevalent it was before.
2019-03-03 23:15:40 +00:00
arch="armhf"
options="!check !archcheck"
depends="postmarketos-base linux-asus-grouper mkbootimg mesa-dri-swrast"
makedepends="devicepkg-dev"
asus-grouper: create nonfree firmware subpackage (!252) With this firmware I can connect to my AP using wpa_supplicant, ping servers and fetch files normally. However the driver also brings up the p2p0 interface on boot and it seems to conflict with wlan0. So to test the wireless we need to disable p2p0 and stop the wpa_supplicant service (because it attaches itself to p2p0 on boot): $ sudo ip link set p2p0 down $ sudo rc-service wpa_supplicant stop $ wpa_passphrase <your ESSID> <your password> > ./wpa_config $ sudo wpa_supplicant -B -Dnl80211 -iwlan0 -c./wpa_config $ sudo udhcpc -i wlan0 $ ping postmarketos.org PING postmarketos.org (188.166.143.8): 56 data bytes 64 bytes from 188.166.143.8: seq=0 ttl=42 time=41.604 ms 64 bytes from 188.166.143.8: seq=1 ttl=42 time=56.022 ms 64 bytes from 188.166.143.8: seq=2 ttl=42 time=54.911 ms 64 bytes from 188.166.143.8: seq=3 ttl=42 time=54.241 ms ... $ sudo apk update fetch http://postmarketos.brixit.nl/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/main/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/community/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/testing/armhf/APKINDEX.tar.gz v20190228-49-gbc0f9441b0 [http://dl-cdn.alpinelinux.org/alpine/edge/main] v20190228-41-g6ee930cc6c [http://dl-cdn.alpinelinux.org/alpine/edge/community] v20190228-48-g67283cdbf6 [http://dl-cdn.alpinelinux.org/alpine/edge/testing] OK: 13694 distinct packages available
2019-03-03 18:57:07 +00:00
subpackages="$pkgname-nonfree-firmware:nonfree_firmware"
[grouper] Add osk-sdl config for device (#670)
2017-11-18 17:42:37 +00:00
source="deviceinfo
asus-grouper: create nonfree firmware subpackage (!252) With this firmware I can connect to my AP using wpa_supplicant, ping servers and fetch files normally. However the driver also brings up the p2p0 interface on boot and it seems to conflict with wlan0. So to test the wireless we need to disable p2p0 and stop the wpa_supplicant service (because it attaches itself to p2p0 on boot): $ sudo ip link set p2p0 down $ sudo rc-service wpa_supplicant stop $ wpa_passphrase <your ESSID> <your password> > ./wpa_config $ sudo wpa_supplicant -B -Dnl80211 -iwlan0 -c./wpa_config $ sudo udhcpc -i wlan0 $ ping postmarketos.org PING postmarketos.org (188.166.143.8): 56 data bytes 64 bytes from 188.166.143.8: seq=0 ttl=42 time=41.604 ms 64 bytes from 188.166.143.8: seq=1 ttl=42 time=56.022 ms 64 bytes from 188.166.143.8: seq=2 ttl=42 time=54.911 ms 64 bytes from 188.166.143.8: seq=3 ttl=42 time=54.241 ms ... $ sudo apk update fetch http://postmarketos.brixit.nl/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/main/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/community/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/testing/armhf/APKINDEX.tar.gz v20190228-49-gbc0f9441b0 [http://dl-cdn.alpinelinux.org/alpine/edge/main] v20190228-41-g6ee930cc6c [http://dl-cdn.alpinelinux.org/alpine/edge/community] v20190228-48-g67283cdbf6 [http://dl-cdn.alpinelinux.org/alpine/edge/testing] OK: 13694 distinct packages available
2019-03-03 18:57:07 +00:00
pointercal
nvram.txt"
asus-grouper: modernize device package (!253) Updated the device-asus-grouper package to use devicepkg-dev. I've tested the resulting image and it builds, boots and has a working touchscreen (in Weston) I've also noticed that the device reboots itself at times, both in the USB ssh console and in Weston. This seems to be a known issue but I don't know how prevalent it was before.
2019-03-03 23:15:40 +00:00
build() {
devicepkg_build $startdir $pkgname
}
Add asus-grouper (#180)
2017-07-20 16:05:33 +00:00
package() {
asus-grouper: modernize device package (!253) Updated the device-asus-grouper package to use devicepkg-dev. I've tested the resulting image and it builds, boots and has a working touchscreen (in Weston) I've also noticed that the device reboots itself at times, both in the USB ssh console and in Weston. This seems to be a known issue but I don't know how prevalent it was before.
2019-03-03 23:15:40 +00:00
devicepkg_package $startdir $pkgname
[grouper] Add osk-sdl config for device (#670)
2017-11-18 17:42:37 +00:00
install -D -m644 "$srcdir"/pointercal \
"$pkgdir"/etc/pointercal
Add asus-grouper (#180)
2017-07-20 16:05:33 +00:00
}
asus-grouper: create nonfree firmware subpackage (!252) With this firmware I can connect to my AP using wpa_supplicant, ping servers and fetch files normally. However the driver also brings up the p2p0 interface on boot and it seems to conflict with wlan0. So to test the wireless we need to disable p2p0 and stop the wpa_supplicant service (because it attaches itself to p2p0 on boot): $ sudo ip link set p2p0 down $ sudo rc-service wpa_supplicant stop $ wpa_passphrase <your ESSID> <your password> > ./wpa_config $ sudo wpa_supplicant -B -Dnl80211 -iwlan0 -c./wpa_config $ sudo udhcpc -i wlan0 $ ping postmarketos.org PING postmarketos.org (188.166.143.8): 56 data bytes 64 bytes from 188.166.143.8: seq=0 ttl=42 time=41.604 ms 64 bytes from 188.166.143.8: seq=1 ttl=42 time=56.022 ms 64 bytes from 188.166.143.8: seq=2 ttl=42 time=54.911 ms 64 bytes from 188.166.143.8: seq=3 ttl=42 time=54.241 ms ... $ sudo apk update fetch http://postmarketos.brixit.nl/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/main/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/community/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/testing/armhf/APKINDEX.tar.gz v20190228-49-gbc0f9441b0 [http://dl-cdn.alpinelinux.org/alpine/edge/main] v20190228-41-g6ee930cc6c [http://dl-cdn.alpinelinux.org/alpine/edge/community] v20190228-48-g67283cdbf6 [http://dl-cdn.alpinelinux.org/alpine/edge/testing] OK: 13694 distinct packages available
2019-03-03 18:57:07 +00:00
nonfree_firmware() {
pkgdesc="Google Nexus 7 (2012) wifi firmware"
depends="firmware-aosp-broadcom-wlan"
mkdir "$subpkgdir"
install -D -m644 "$srcdir"/nvram.txt \
"$subpkgdir"/lib/firmware/postmarketos/bcmdhd/bcm4330/fw_bcm4330_bg.txt
}
asus-grouper: modernize device package (!253) Updated the device-asus-grouper package to use devicepkg-dev. I've tested the resulting image and it builds, boots and has a working touchscreen (in Weston) I've also noticed that the device reboots itself at times, both in the USB ssh console and in Weston. This seems to be a known issue but I don't know how prevalent it was before.
2019-03-03 23:15:40 +00:00
sha512sums="a374e9681fbeaff5047820f8b7a9c249195232730a412208415243ea8bf7a87cdc4399ab86b1c08448be279f5c9dedcb47d03ac83587f908a4c51e442a97da50 deviceinfo
asus-grouper: create nonfree firmware subpackage (!252) With this firmware I can connect to my AP using wpa_supplicant, ping servers and fetch files normally. However the driver also brings up the p2p0 interface on boot and it seems to conflict with wlan0. So to test the wireless we need to disable p2p0 and stop the wpa_supplicant service (because it attaches itself to p2p0 on boot): $ sudo ip link set p2p0 down $ sudo rc-service wpa_supplicant stop $ wpa_passphrase <your ESSID> <your password> > ./wpa_config $ sudo wpa_supplicant -B -Dnl80211 -iwlan0 -c./wpa_config $ sudo udhcpc -i wlan0 $ ping postmarketos.org PING postmarketos.org (188.166.143.8): 56 data bytes 64 bytes from 188.166.143.8: seq=0 ttl=42 time=41.604 ms 64 bytes from 188.166.143.8: seq=1 ttl=42 time=56.022 ms 64 bytes from 188.166.143.8: seq=2 ttl=42 time=54.911 ms 64 bytes from 188.166.143.8: seq=3 ttl=42 time=54.241 ms ... $ sudo apk update fetch http://postmarketos.brixit.nl/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/main/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/community/armhf/APKINDEX.tar.gz fetch http://dl-cdn.alpinelinux.org/alpine/edge/testing/armhf/APKINDEX.tar.gz v20190228-49-gbc0f9441b0 [http://dl-cdn.alpinelinux.org/alpine/edge/main] v20190228-41-g6ee930cc6c [http://dl-cdn.alpinelinux.org/alpine/edge/community] v20190228-48-g67283cdbf6 [http://dl-cdn.alpinelinux.org/alpine/edge/testing] OK: 13694 distinct packages available
2019-03-03 18:57:07 +00:00
ae9c145ffd745c83c73edbc486d3b9d22c6cbb8c57827b6f1ba87b6449a17a73a443be7daa0ab87de8df2dd9594e624364652c84ec1e7b536d37f52449a5a58c pointercal
093a615250689f83c43af18a195d66d89e4b56584069a3903652e68e9da42568d2e176aa77cf23e1f23b3cb869f5c639fb1c8cdfc8af9fc6d17abe17cad7e821 nvram.txt"
Reference in a new issue Copy permalink