pmaports/main/linux-postmarketos-stable/APKBUILD

176 lines
5.2 KiB
Text
Raw Normal View History

_flavor=postmarketos-stable
_hash="7b6fbfd899b4133e4f789843e5967beb139ec4d2"
_config="config-${_flavor}.${CARCH}"
pkgname=linux-${_flavor}
pkgver=5.1.5
case $pkgver in
*.*.*) _kernver=${pkgver%.*};;
*.*) _kernver=$pkgver;;
esac
pkgrel=1
arch="x86_64 armv7 aarch64"
pkgdesc="Linux for pmOS supported chipsets (stable)"
url="https://kernel.org/"
depends=""
makedepends="perl sed installkernel bash gmp-dev bc linux-headers elfutils-dev openssl-dev file bison flex"
options="!strip !check !tracedeps"
install=
source="
https://cdn.kernel.org/pub/linux/kernel/v${pkgver%%.*}.x/linux-$_kernver.tar.xz
config-${_flavor}.armv7
Close #226: Launch postmarketOS in a qemu virtual machine (#350) Thanks to Pablo Castellano and Martijn Braam! In postmarketOS we are now able to generate system images with the correct configuration so that they can boot already using qemu This commit brings the `pmbootstrap qemu` action. This command is very handy because you don't have to set all the qemu parameters, pmbootstrap does it for you. * device-qemu-vexpress: Added kernel command line according to wiki * qemu: Added workaround for image writing permissions * qemu: Added support to launch postmarketOS in a QEMU virtual machine - Support for emulating these architectures in QEMU: arm, aarch64, x86_84 - Generate QEMU command correctly depending no guest architecture (arm/x86) - Run QEMU in the same architecture as the host by default - Refactoring in pmb.parse.arch and pmb.qemu.run - Raise exception if DTB file or system image are not present - Display more useful information when something fails (e.g. image not found) - Run qemu version depending on arch (host or argument), not device configured * device-qemu-amd64: set deviceinfo_kernel_cmdline to "PMOS_NO_OUTPUT_REDIRECT" * qemu: added --memory argument to specific guest RAM * device-qemu-amd64: adjusted deviceinfo_kernel_cmdline (console=tty1) * Added /etc/network/interfaces for qemu-amd64 * qemu: Added KVM support if /dev/kvm if present * Specify separate machines for architecture * qemu: Check if QEMU is installed instead of crashing * Added graphics driver to qemu-aarch64 - Use arm (as used in qemu) instead of armhf (used in Alpine) - qemu argument is -dtb - Follow same style to build the command + arguments * qemu: Added SSH port redirection: ./pmbootstrap.py qemu -p 2222
2017-08-09 20:26:40 +00:00
config-${_flavor}.aarch64
config-${_flavor}.x86_64
"
if [ "${pkgver%.0}" = "$pkgver" ]; then
source="$source
https://cdn.kernel.org/pub/linux/kernel/v${pkgver%%.*}.x/patch-$pkgver.xz"
fi
subpackages="$pkgname-dev"
license="GPL2"
_abi_release=${pkgver}
_carch=${CARCH}
case "$_carch" in
aarch64*) _carch="arm64" ;;
arm*) _carch="arm" ;;
ppc*) _carch="powerpc" ;;
s390*) _carch="s390" ;;
esac
HOSTCC="${CC:-gcc}"
HOSTCC="${HOSTCC#${CROSS_COMPILE}}"
ksrcdir="$srcdir/linux-$_kernver"
prepare() {
local _patch_failed=
cd "$ksrcdir"
if [ "$_kernver" != "$pkgver" ]; then
msg "Applying patch-$pkgver.xz"
unxz -c < "$srcdir"/patch-$pkgver.xz | patch -p1 -N
fi
# first apply patches in specified order
for i in $source; do
case $i in
*.patch)
msg "Applying $i..."
if ! patch -s -p1 -N -i "$srcdir"/$i; then
echo $i >>failed
_patch_failed=1
fi
;;
esac
done
if ! [ -z "$_patch_failed" ]; then
error "The following patches failed:"
cat failed
return 1
fi
mkdir -p "$srcdir"/build
cp -v "$srcdir"/$_config "$srcdir"/build/.config
make -C "$ksrcdir" O="$srcdir"/build ARCH="$_carch" HOSTCC="$HOSTCC" \
olddefconfig
}
build() {
cd "$srcdir"/build
unset LDFLAGS
make ARCH="$_carch" CC="${CC:-gcc}" \
KBUILD_BUILD_VERSION="$((pkgrel + 1 ))-postmarketOS" \
CFLAGS_MODULE=-fno-pic
}
package() {
cd "$srcdir/build/arch/${_carch}/boot"
Close #226: Launch postmarketOS in a qemu virtual machine (#350) Thanks to Pablo Castellano and Martijn Braam! In postmarketOS we are now able to generate system images with the correct configuration so that they can boot already using qemu This commit brings the `pmbootstrap qemu` action. This command is very handy because you don't have to set all the qemu parameters, pmbootstrap does it for you. * device-qemu-vexpress: Added kernel command line according to wiki * qemu: Added workaround for image writing permissions * qemu: Added support to launch postmarketOS in a QEMU virtual machine - Support for emulating these architectures in QEMU: arm, aarch64, x86_84 - Generate QEMU command correctly depending no guest architecture (arm/x86) - Run QEMU in the same architecture as the host by default - Refactoring in pmb.parse.arch and pmb.qemu.run - Raise exception if DTB file or system image are not present - Display more useful information when something fails (e.g. image not found) - Run qemu version depending on arch (host or argument), not device configured * device-qemu-amd64: set deviceinfo_kernel_cmdline to "PMOS_NO_OUTPUT_REDIRECT" * qemu: added --memory argument to specific guest RAM * device-qemu-amd64: adjusted deviceinfo_kernel_cmdline (console=tty1) * Added /etc/network/interfaces for qemu-amd64 * qemu: Added KVM support if /dev/kvm if present * Specify separate machines for architecture * qemu: Check if QEMU is installed instead of crashing * Added graphics driver to qemu-aarch64 - Use arm (as used in qemu) instead of armhf (used in Alpine) - qemu argument is -dtb - Follow same style to build the command + arguments * qemu: Added SSH port redirection: ./pmbootstrap.py qemu -p 2222
2017-08-09 20:26:40 +00:00
if [ "$CARCH" == "aarch64" ]; then
install -Dm644 "$srcdir/build/arch/${_carch}/boot/Image" \
"$pkgdir/boot/vmlinuz-$_flavor"
else
install -Dm644 "$srcdir/build/arch/${_carch}/boot/"*zImage \
"$pkgdir/boot/vmlinuz-$_flavor"
fi
install -D "$srcdir/build/include/config/kernel.release" \
"$pkgdir/usr/share/kernel/$_flavor/kernel.release"
cd "$srcdir"/build
local _install
case "$CARCH" in
aarch64*|arm*) _install="modules_install dtbs_install" ;;
*) _install="modules_install" ;;
esac
make -j1 $_install \
ARCH="$_carch" \
INSTALL_MOD_PATH="$pkgdir" \
INSTALL_DTBS_PATH="$pkgdir/usr/share/dtb"
}
dev() {
# copy the only the parts that we really need for build 3rd party
# kernel modules and install those as /usr/src/linux-headers,
# similar to what ubuntu does
#
# this way you don't need to install the 300-400 kernel sources to
# build a tiny kernel module
#
pkgdesc="Headers and script for third party modules for postmarketos kernel"
depends="gmp-dev bash perl"
local dir="$subpkgdir"/usr/src/linux-headers-${_abi_release}
# first we import config, run prepare to set up for building
# external modules, and create the scripts
mkdir -p "$dir"
cp "$srcdir"/$_config "$dir"/.config
make -j1 -C "$srcdir"/linux-$_kernver O="$dir" ARCH="$_carch" HOSTCC="$HOSTCC" \
olddefconfig prepare modules_prepare scripts
# needed for 3rd party modules
# https://bugzilla.kernel.org/show_bug.cgi?id=11143
case "$CARCH" in
ppc*) (cd "$dir" && make arch/powerpc/lib/crtsavres.o);;
esac
# remove the stuff that points to real sources. we want 3rd party
# modules to believe this is the sources
rm "$dir"/Makefile "$dir"/source
# copy the needed stuff from real sources
#
# this is taken from ubuntu kernel build script
# http://kernel.ubuntu.com/git/ubuntu/ubuntu-zesty.git/tree/debian/rules.d/3-binary-indep.mk
cd "$srcdir"/linux-$_kernver
find . -path './include/*' -prune \
-o -path './scripts/*' -prune -o -type f \
\( -name 'Makefile*' -o -name 'Kconfig*' -o -name 'Kbuild*' -o \
-name '*.sh' -o -name '*.pl' -o -name '*.lds' \) \
-print | cpio -pdm "$dir"
cp -a scripts include "$dir"
find $(find arch -name include -type d -print) -type f \
| cpio -pdm "$dir"
install -Dm644 "$srcdir"/build/Module.symvers \
"$dir"/Module.symvers
mkdir -p "$subpkgdir"/lib/modules/${_abi_release}
ln -sf /usr/src/linux-headers-${_abi_release} \
"$subpkgdir"/lib/modules/${_abi_release}/build
}
sha512sums="ae96f347badc95f1f3acf506c52b6cc23c0bd09ce8f4ce6705d4b4058b62593059bba1bc603c8d8b00a2f19131e7e56c31ac62b45883a346fa61d655e178f236 linux-5.1.tar.xz
117428ac84d5dc13edcafa4393887e793d8bc4fbfe05f2a7b85a835f910b5bfb349e4e044e4e18abb4ab0ec2209a034fbb2a9d8467270381f69de29984eff5c6 config-postmarketos-stable.armv7
b24240f2c8e011ffa1ff141cf8d623dcbe4cbde389322e59e264edf1b01985b3527576a06c1f0d8e5ef67519f95cc9a9ff9f2636178d00e4272cd472e268f1ec config-postmarketos-stable.aarch64
77ae0b80272d871475043cc17ae54e20d5456da8c729ea832906c2881389c53e4d800aaeab38090f3f878f15045b2c70dc4912b62742753c40f80ad69ed51599 config-postmarketos-stable.x86_64
793d61bbefe3587f95cf2b6eb56f3c60ef36512448ddcb1ab7c4fb614e14336e8d703f7cf188dfab46cb40d60511291b5163d2dae8c0bc950caeebd1e4e6c9c2 patch-5.1.5.xz"