forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/community/linux-postmarketos-rockchip/APKBUILD

102 lines
2.7 KiB
Text
Raw Normal View History

device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
# Maintainer: Martijn Braam <martijn@brixit.nl>
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
# This is seperate from linux-edge so we can control the release cycle better.
linux-postmarketos-rockchip: Enable SATA support (MR 2119) Enable SATA host support, the AHCI driver, and SCSI disk support so that some generic PCIe SATA cards will properly detect and mount SATA drives connected to them. Tested on a RockPro64 with 2 3.5" drives connected in RAID 0 to an Ableconn PEXSA115A 2-port PCIe x2 card (ASM1062).
2021-04-18 21:56:40 +00:00
# If this kernel is updated and fails to boot it's quite hard to recover the
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
# rk3399 devices due to the boot order. This kernel also has a kconfig that has
# more modules built-in that are required for successfully booting on these
# devices.
# It's important that CONFIG_ROCKCHIP_CDN_DP is _disabled_ because it causes
# boot failure
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
pkgname=linux-postmarketos-rockchip
linux-postmarketos-rockchip: upgrade to 5.18 (MR 3170) Dropped the usb-c patches, because it looks like usb-c charging works now out of the box on 5.18, and that was the primary reason for me to include those patches here originally. [ci:skip-build] already built successfully in CI
2022-05-29 22:34:17 +00:00
pkgver=5.18
linux-postmarketos-rockchip: add support for gru chromebooks (MR 3215)
2022-06-09 23:38:22 +00:00
pkgrel=3
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
pkgdesc="Mainline kernel for rockchip devices"
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
arch="aarch64 armv7"
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
_flavor="${pkgname#linux-}"
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
url="https://kernel.org"
license="GPL-2.0-only"
linux-postmarketos-rockchip: upgrade to 5.13, enable nftables (MR 2299) This switches the config over to one based on Alpine's linux-gru which is for an rk3399 chromebook. It produces way smaller kernels and has more general purpose hardware support.
2021-07-01 22:55:21 +00:00
options="!strip !check !tracedeps
pmb:cross-native
pmb:kconfigcheck-anbox
pmb:kconfigcheck-nftables
pmb:kconfigcheck-containers
pmb:kconfigcheck-zram
"
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
makedepends="
bison
devicepkg-dev
findutils
flex
installkernel
openssl-dev
perl
rsync
linux-postmarketos-rockchip: upgrade to 5.13, enable nftables (MR 2299) This switches the config over to one based on Alpine's linux-gru which is for an rk3399 chromebook. It produces way smaller kernels and has more general purpose hardware support.
2021-07-01 22:55:21 +00:00
gzip
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
xz
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
gmp-dev
mpc1-dev
mpfr-dev
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
"
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
case "$CARCH" in
aarch64*) _carch="arm64" ;;
arm*) _carch="arm" ;;
esac
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
# Source
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
_config="config-$_flavor.$CARCH"
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
case $pkgver in
*.*.*) _kernver=${pkgver%.0};;
*.*) _kernver=$pkgver;;
esac
linux-postmarketos-rockchip: upgrade to 5.13, enable nftables (MR 2299) This switches the config over to one based on Alpine's linux-gru which is for an rk3399 chromebook. It produces way smaller kernels and has more general purpose hardware support.
2021-07-01 22:55:21 +00:00
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
source="
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
https://cdn.kernel.org/pub/linux/kernel/v${_kernver%%.*}.x/linux-$_kernver.tar.xz
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
0007-block-partitions-efi-Add-support-for-IGNOREME-GPT-si.patch
main/linux-postmarketos-rockchip: add patches for CVE-2021-39685 (MR 2765) [ci:skip-build] Already built on CI in MR
2021-12-17 15:31:23 +00:00
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
config-$_flavor.aarch64
config-$_flavor.armv7
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
"
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
builddir="$srcdir/linux-$_kernver"
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
prepare() {
default_prepare
REPLACE_GCCH=0 \
. downstreamkernel_prepare
}
build() {
unset LDFLAGS
main/linux-postmarketos-rockchip: upgrade to 5.13.4, use GCC (MR 2372) llvm was left over from Martijn's efforts to reduce the kernel size The drivers for external DP are enabled here, but all patches from manjaro that deal with DP/typec alt mode, etc are dropped since they do not solve anything on their own and may cause display instability issues... [ci:skip-build]: already built successfully in CI
2021-07-21 18:06:40 +00:00
make ARCH="$_carch" \
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
KBUILD_BUILD_VERSION="$((pkgrel + 1 ))-$_flavor"
linux-postmarketos-rockchip: upgrade to 5.13, enable nftables (MR 2299) This switches the config over to one based on Alpine's linux-gru which is for an rk3399 chromebook. It produces way smaller kernels and has more general purpose hardware support.
2021-07-01 22:55:21 +00:00
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
}
package() {
downstreamkernel_package "$builddir" "$pkgdir" "$_carch" "$_flavor"
make -j1 modules_install dtbs_install \
ARCH="$_carch" \
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
INSTALL_MOD_STRIP=1 \
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
INSTALL_MOD_PATH="$pkgdir" \
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
INSTALL_DTBS_PATH="$pkgdir/boot/dtbs-$_flavor"
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
# not all armv7 devices (google-veyon-jerry) support booting gzipped kernels yet
if [ $_carch = arm64 ]; then
linux-*: don't use 'flavor' in kernel name (MR 2426)
2021-08-25 19:35:59 +00:00
gzip -v "$pkgdir"/boot/vmlinuz
mv "$pkgdir"/boot/vmlinuz.gz "$pkgdir"/boot/vmlinuz
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
else
linux-*: don't use 'flavor' in kernel name (MR 2426)
2021-08-25 19:35:59 +00:00
mv "$pkgdir"/boot/vmlinuz "$pkgdir"/boot/vmlinuz
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
fi
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
}
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
linux-postmarketos-rockchip: upgrade to 5.13, enable nftables (MR 2299) This switches the config over to one based on Alpine's linux-gru which is for an rk3399 chromebook. It produces way smaller kernels and has more general purpose hardware support.
2021-07-01 22:55:21 +00:00
sha512sums="
linux-postmarketos-rockchip: upgrade to 5.18 (MR 3170) Dropped the usb-c patches, because it looks like usb-c charging works now out of the box on 5.18, and that was the primary reason for me to include those patches here originally. [ci:skip-build] already built successfully in CI
2022-05-29 22:34:17 +00:00
dbbc9d1395898a498fa4947fceda1781344fa5d360240f753810daa4fa88e519833e2186c4e582a8f1836e6413e9e85f6563c7770523b704e8702d67622f98b5 linux-5.18.tar.xz
linux-postmarketos-rockchip: upgrade to 5.16.8 (MR 2923) Dropped patches that are now present in stable linux. Forward ported the EFI IGNOREME patch to 5.16 Enabled a few very common pcie network adapters
2022-02-09 17:45:25 +00:00
265b05bc542edb290ec15cd5f50132698a32e80d30ce28ce3ad7e990b7c07df92c4556122505b07a6aa582a919459872d1d874f4ed422d2aff2cdfb51889e720 0007-block-partitions-efi-Add-support-for-IGNOREME-GPT-si.patch
linux-postmarketos-rockchip: add support for gru chromebooks (MR 3215)
2022-06-09 23:38:22 +00:00
babc357811cab42a0c2ea7d7187aa5d1603be6dea012423b3afde9318f2d797b2e1ba7650aef9c64f2a3ca1396cf713da2639cecee38ccfaacbb2e28c5856524 config-postmarketos-rockchip.aarch64
linux-postmarketos-rockchip: rework armv7 config (MR 3187)
2022-06-02 19:52:56 +00:00
4eb095196a5e8e8e42de6d3e362c99498d1c7601c7ce91ea532abe9288e2e71ef20549dec22825ff547129c7c615a6a837e39dc64e9260ccadaf5c6bcf52bf58 config-postmarketos-rockchip.armv7
linux-postmarketos-rockchip: upgrade to 5.13, enable nftables (MR 2299) This switches the config over to one based on Alpine's linux-gru which is for an rk3399 chromebook. It produces way smaller kernels and has more general purpose hardware support.
2021-07-01 22:55:21 +00:00
"
Reference in a new issue Copy permalink