441 lines
9.1 KiB
Diff
441 lines
9.1 KiB
Diff
|
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
|
||
|
index faf46aba..1d846974 100644
|
||
|
--- a/arch/arm/boot/dts/Makefile
|
||
|
+++ b/arch/arm/boot/dts/Makefile
|
||
|
@@ -701,6 +701,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
||
|
qcom-msm8660-surf.dtb \
|
||
|
qcom-msm8960-cdp.dtb \
|
||
|
qcom-msm8974-lge-nexus5-hammerhead.dtb \
|
||
|
+ qcom-msm8974-sony-xperia-amami.dtb \
|
||
|
qcom-msm8974-sony-xperia-honami.dtb \
|
||
|
qcom-mdm9615-wp8548-mangoh-green.dtb
|
||
|
dtb-$(CONFIG_ARCH_REALVIEW) += \
|
||
|
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
|
||
|
index e69de29b..fa6beb54 100644
|
||
|
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
|
||
|
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-amami.dts
|
||
|
@@ -0,0 +1,423 @@
|
||
|
+#include "qcom-msm8974.dtsi"
|
||
|
+#include "qcom-pm8841.dtsi"
|
||
|
+#include "qcom-pm8941.dtsi"
|
||
|
+#include <dt-bindings/gpio/gpio.h>
|
||
|
+#include <dt-bindings/input/input.h>
|
||
|
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||
|
+
|
||
|
+/ {
|
||
|
+ model = "Sony Xperia Z1 Compact";
|
||
|
+ compatible = "sony,xperia-amami", "qcom,msm8974";
|
||
|
+
|
||
|
+ aliases {
|
||
|
+ serial0 = &blsp1_uart2;
|
||
|
+ };
|
||
|
+
|
||
|
+ chosen {
|
||
|
+ stdout-path = "serial0:115200n8";
|
||
|
+ };
|
||
|
+
|
||
|
+ gpio-keys {
|
||
|
+ compatible = "gpio-keys";
|
||
|
+ input-name = "gpio-keys";
|
||
|
+
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&gpio_keys_pin_a>;
|
||
|
+
|
||
|
+ volume-down {
|
||
|
+ label = "volume_down";
|
||
|
+ gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
|
||
|
+ linux,input-type = <1>;
|
||
|
+ linux,code = <KEY_VOLUMEDOWN>;
|
||
|
+ };
|
||
|
+
|
||
|
+ camera-snapshot {
|
||
|
+ label = "camera_snapshot";
|
||
|
+ gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
|
||
|
+ linux,input-type = <1>;
|
||
|
+ linux,code = <KEY_CAMERA>;
|
||
|
+ };
|
||
|
+
|
||
|
+ camera-focus {
|
||
|
+ label = "camera_focus";
|
||
|
+ gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
|
||
|
+ linux,input-type = <1>;
|
||
|
+ linux,code = <KEY_CAMERA_FOCUS>;
|
||
|
+ };
|
||
|
+
|
||
|
+ volume-up {
|
||
|
+ label = "volume_up";
|
||
|
+ gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
|
||
|
+ linux,input-type = <1>;
|
||
|
+ linux,code = <KEY_VOLUMEUP>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ memory@0 {
|
||
|
+ reg = <0 0x40000000>, <0x40000000 0x40000000>;
|
||
|
+ device_type = "memory";
|
||
|
+ };
|
||
|
+
|
||
|
+ smd {
|
||
|
+ rpm {
|
||
|
+ rpm_requests {
|
||
|
+ pm8841-regulators {
|
||
|
+ s1 {
|
||
|
+ regulator-min-microvolt = <675000>;
|
||
|
+ regulator-max-microvolt = <1050000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ s2 {
|
||
|
+ regulator-min-microvolt = <500000>;
|
||
|
+ regulator-max-microvolt = <1050000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ s3 {
|
||
|
+ regulator-min-microvolt = <500000>;
|
||
|
+ regulator-max-microvolt = <1050000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ s4 {
|
||
|
+ regulator-min-microvolt = <500000>;
|
||
|
+ regulator-max-microvolt = <1050000>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ pm8941-regulators {
|
||
|
+ vdd_l1_l3-supply = <&pm8941_s1>;
|
||
|
+ vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
|
||
|
+ vdd_l4_l11-supply = <&pm8941_s1>;
|
||
|
+ vdd_l5_l7-supply = <&pm8941_s2>;
|
||
|
+ vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
|
||
|
+ vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
|
||
|
+ vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
|
||
|
+ vdd_l21-supply = <&vreg_boost>;
|
||
|
+
|
||
|
+ s1 {
|
||
|
+ regulator-min-microvolt = <1300000>;
|
||
|
+ regulator-max-microvolt = <1300000>;
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ s2 {
|
||
|
+ regulator-min-microvolt = <2150000>;
|
||
|
+ regulator-max-microvolt = <2150000>;
|
||
|
+ regulator-boot-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ s3 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ s4 {
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5000000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ l1 {
|
||
|
+ regulator-min-microvolt = <1225000>;
|
||
|
+ regulator-max-microvolt = <1225000>;
|
||
|
+
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ l2 {
|
||
|
+ regulator-min-microvolt = <1200000>;
|
||
|
+ regulator-max-microvolt = <1200000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ l3 {
|
||
|
+ regulator-min-microvolt = <1200000>;
|
||
|
+ regulator-max-microvolt = <1200000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ l4 {
|
||
|
+ regulator-min-microvolt = <1225000>;
|
||
|
+ regulator-max-microvolt = <1225000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ l5 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ l6 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+
|
||
|
+ regulator-boot-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ l7 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+
|
||
|
+ regulator-boot-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ l8 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ l9 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <2950000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ l11 {
|
||
|
+ regulator-min-microvolt = <1300000>;
|
||
|
+ regulator-max-microvolt = <1350000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ l12 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ l13 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <2950000>;
|
||
|
+
|
||
|
+ regulator-boot-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ l14 {
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ l15 {
|
||
|
+ regulator-min-microvolt = <2050000>;
|
||
|
+ regulator-max-microvolt = <2050000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ l16 {
|
||
|
+ regulator-min-microvolt = <2700000>;
|
||
|
+ regulator-max-microvolt = <2700000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ l17 {
|
||
|
+ regulator-min-microvolt = <2700000>;
|
||
|
+ regulator-max-microvolt = <2700000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ l18 {
|
||
|
+ regulator-min-microvolt = <2850000>;
|
||
|
+ regulator-max-microvolt = <2850000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ l19 {
|
||
|
+ regulator-min-microvolt = <3300000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ l20 {
|
||
|
+ regulator-min-microvolt = <2950000>;
|
||
|
+ regulator-max-microvolt = <2950000>;
|
||
|
+
|
||
|
+ regulator-allow-set-load;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-system-load = <200000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ l21 {
|
||
|
+ regulator-min-microvolt = <2950000>;
|
||
|
+ regulator-max-microvolt = <2950000>;
|
||
|
+
|
||
|
+ regulator-boot-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ l22 {
|
||
|
+ regulator-min-microvolt = <3000000>;
|
||
|
+ regulator-max-microvolt = <3000000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ l23 {
|
||
|
+ regulator-min-microvolt = <2800000>;
|
||
|
+ regulator-max-microvolt = <2800000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ l24 {
|
||
|
+ regulator-min-microvolt = <3075000>;
|
||
|
+ regulator-max-microvolt = <3075000>;
|
||
|
+
|
||
|
+ regulator-boot-on;
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&soc {
|
||
|
+ sdhci@f9824900 {
|
||
|
+ status = "ok";
|
||
|
+
|
||
|
+ vmmc-supply = <&pm8941_l20>;
|
||
|
+ vqmmc-supply = <&pm8941_s3>;
|
||
|
+
|
||
|
+ bus-width = <8>;
|
||
|
+ non-removable;
|
||
|
+
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&sdhc1_pin_a>;
|
||
|
+ };
|
||
|
+
|
||
|
+ sdhci@f98a4900 {
|
||
|
+ status = "ok";
|
||
|
+
|
||
|
+ bus-width = <4>;
|
||
|
+
|
||
|
+ vmmc-supply = <&pm8941_l21>;
|
||
|
+ vqmmc-supply = <&pm8941_l13>;
|
||
|
+
|
||
|
+ cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
|
||
|
+
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
|
||
|
+ };
|
||
|
+
|
||
|
+ serial@f991e000 {
|
||
|
+ status = "ok";
|
||
|
+
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&blsp1_uart2_pin_a>;
|
||
|
+ };
|
||
|
+
|
||
|
+
|
||
|
+ pinctrl@fd510000 {
|
||
|
+ blsp1_uart2_pin_a: blsp1-uart2-pin-active {
|
||
|
+ rx {
|
||
|
+ pins = "gpio5";
|
||
|
+ function = "blsp_uart2";
|
||
|
+
|
||
|
+ drive-strength = <2>;
|
||
|
+ bias-pull-up;
|
||
|
+ };
|
||
|
+
|
||
|
+ tx {
|
||
|
+ pins = "gpio4";
|
||
|
+ function = "blsp_uart2";
|
||
|
+
|
||
|
+ drive-strength = <4>;
|
||
|
+ bias-disable;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ i2c2_pins: i2c2 {
|
||
|
+ mux {
|
||
|
+ pins = "gpio6", "gpio7";
|
||
|
+ function = "blsp_i2c2";
|
||
|
+
|
||
|
+ drive-strength = <2>;
|
||
|
+ bias-disable;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ sdhc1_pin_a: sdhc1-pin-active {
|
||
|
+ clk {
|
||
|
+ pins = "sdc1_clk";
|
||
|
+ drive-strength = <16>;
|
||
|
+ bias-disable;
|
||
|
+ };
|
||
|
+
|
||
|
+ cmd-data {
|
||
|
+ pins = "sdc1_cmd", "sdc1_data";
|
||
|
+ drive-strength = <10>;
|
||
|
+ bias-pull-up;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ sdhc2_cd_pin_a: sdhc2-cd-pin-active {
|
||
|
+ pins = "gpio62";
|
||
|
+ function = "gpio";
|
||
|
+
|
||
|
+ drive-strength = <2>;
|
||
|
+ bias-disable;
|
||
|
+ };
|
||
|
+
|
||
|
+ sdhc2_pin_a: sdhc2-pin-active {
|
||
|
+ clk {
|
||
|
+ pins = "sdc2_clk";
|
||
|
+ drive-strength = <10>;
|
||
|
+ bias-disable;
|
||
|
+ };
|
||
|
+
|
||
|
+ cmd-data {
|
||
|
+ pins = "sdc2_cmd", "sdc2_data";
|
||
|
+ drive-strength = <6>;
|
||
|
+ bias-pull-up;
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ dma-controller@f9944000 {
|
||
|
+ qcom,controlled-remotely;
|
||
|
+ };
|
||
|
+
|
||
|
+ usb@f9a55000 {
|
||
|
+ status = "ok";
|
||
|
+
|
||
|
+ phys = <&usb_hs1_phy>;
|
||
|
+ phy-select = <&tcsr 0xb000 0>;
|
||
|
+ extcon = <&smbb>, <&usb_id>;
|
||
|
+ vbus-supply = <&chg_otg>;
|
||
|
+
|
||
|
+ hnp-disable;
|
||
|
+ srp-disable;
|
||
|
+ adp-disable;
|
||
|
+
|
||
|
+ ulpi {
|
||
|
+ phy@a {
|
||
|
+ status = "ok";
|
||
|
+
|
||
|
+ v1p8-supply = <&pm8941_l6>;
|
||
|
+ v3p3-supply = <&pm8941_l24>;
|
||
|
+
|
||
|
+ extcon = <&smbb>;
|
||
|
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&spmi_bus {
|
||
|
+ pm8941@0 {
|
||
|
+ charger@1000 {
|
||
|
+ qcom,fast-charge-safe-current = <1300000>;
|
||
|
+ qcom,fast-charge-current-limit = <1300000>;
|
||
|
+ qcom,dc-current-limit = <1300000>;
|
||
|
+ qcom,fast-charge-safe-voltage = <4400000>;
|
||
|
+ qcom,fast-charge-high-threshold-voltage = <4350000>;
|
||
|
+ qcom,fast-charge-low-threshold-voltage = <3400000>;
|
||
|
+ qcom,auto-recharge-threshold-voltage = <4200000>;
|
||
|
+ qcom,minimum-input-voltage = <4300000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ gpios@c000 {
|
||
|
+ gpio_keys_pin_a: gpio-keys-active {
|
||
|
+ pins = "gpio2", "gpio3", "gpio4", "gpio5";
|
||
|
+ function = "normal";
|
||
|
+
|
||
|
+ bias-pull-up;
|
||
|
+ power-source = <PM8941_GPIO_S3>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ coincell@2800 {
|
||
|
+ status = "ok";
|
||
|
+ qcom,rset-ohms = <2100>;
|
||
|
+ qcom,vset-millivolts = <3000>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+};
|