forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/community/linux-postmarketos-rockchip/APKBUILD

88 lines
2.1 KiB
Text
Raw Normal View History

device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
# Maintainer: Martijn Braam <martijn@brixit.nl>
pine64-pinebookpro: change maintainership (MR 4736) I would like to maintain this device to keep it in community. [ci:skip-vercheck] [ci:skip-build]: already built successfully in CI
2024-01-18 04:00:48 +00:00
# Co-Maintainer: Quade Curry <qc8086@qc8086.com>
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
# This is seperate from linux-edge so we can control the release cycle better.
linux-postmarketos-rockchip: Enable SATA support (MR 2119) Enable SATA host support, the AHCI driver, and SCSI disk support so that some generic PCIe SATA cards will properly detect and mount SATA drives connected to them. Tested on a RockPro64 with 2 3.5" drives connected in RAID 0 to an Ableconn PEXSA115A 2-port PCIe x2 card (ASM1062).
2021-04-18 21:56:40 +00:00
# If this kernel is updated and fails to boot it's quite hard to recover the
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
# rk3399 devices due to the boot order. This kernel also has a kconfig that has
# more modules built-in that are required for successfully booting on these
# devices.
# It's important that CONFIG_ROCKCHIP_CDN_DP is _disabled_ because it causes
# boot failure
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
pkgname=linux-postmarketos-rockchip
community/linux-postmarketos-rockhip: Migrate to linux-6.2 (MR 3899) Update the kernel base and migrate the kernel config. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-23 15:15:49 +00:00
pkgver=6.2
linux-postmarketos-rockchip: enable NFS_FSCACHE (MR 4607) [ci:skip-build]: already built successfully in CI
2023-12-08 09:23:37 +00:00
pkgrel=11
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
pkgdesc="Mainline kernel for rockchip devices"
linux-postmarketos-rockchip: drop armv7 and upgrade to 6.0 (MR 3526) [ci:skip-build] Already built successfuly on CI in MR
2022-10-12 05:18:04 +00:00
arch="aarch64"
_carch="arm64"
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
_flavor="${pkgname#linux-}"
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
url="https://kernel.org"
license="GPL-2.0-only"
linux-postmarketos-rockchip: upgrade to 5.13, enable nftables (MR 2299) This switches the config over to one based on Alpine's linux-gru which is for an rk3399 chromebook. It produces way smaller kernels and has more general purpose hardware support.
2021-07-01 22:55:21 +00:00
options="!strip !check !tracedeps
pmb:cross-native
device/{community,main}/*: migrate to pmb:kconfigcheck-community (MR 3422) Replace usages of pmb:kconfigcheck-* options with pmb:kconfigcheck-community which will be required for all devices in community/main category. This ensures more consistent features & behavior across devices.
2022-09-07 20:43:05 +00:00
pmb:kconfigcheck-community
linux-postmarketos-rockchip: upgrade to 5.13, enable nftables (MR 2299) This switches the config over to one based on Alpine's linux-gru which is for an rk3399 chromebook. It produces way smaller kernels and has more general purpose hardware support.
2021-07-01 22:55:21 +00:00
"
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
makedepends="
linux-postmarketos-rockchip: drop armv7 and upgrade to 6.0 (MR 3526) [ci:skip-build] Already built successfuly on CI in MR
2022-10-12 05:18:04 +00:00
bash
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
bison
devicepkg-dev
findutils
flex
installkernel
openssl-dev
perl
rsync
linux-postmarketos-rockchip: upgrade to 5.13, enable nftables (MR 2299) This switches the config over to one based on Alpine's linux-gru which is for an rk3399 chromebook. It produces way smaller kernels and has more general purpose hardware support.
2021-07-01 22:55:21 +00:00
gzip
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
xz
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
gmp-dev
mpc1-dev
mpfr-dev
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
"
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
# Source
linux-postmarketos-rockchip: drop armv7 and upgrade to 6.0 (MR 3526) [ci:skip-build] Already built successfuly on CI in MR
2022-10-12 05:18:04 +00:00
_config="config-$_flavor.$arch"
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
case $pkgver in
*.*.*) _kernver=${pkgver%.0};;
*.*) _kernver=$pkgver;;
esac
linux-postmarketos-rockchip: upgrade to 5.13, enable nftables (MR 2299) This switches the config over to one based on Alpine's linux-gru which is for an rk3399 chromebook. It produces way smaller kernels and has more general purpose hardware support.
2021-07-01 22:55:21 +00:00
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
source="
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
https://cdn.kernel.org/pub/linux/kernel/v${_kernver%%.*}.x/linux-$_kernver.tar.xz
linux-postmarketos-rockchip: drop armv7 and upgrade to 6.0 (MR 3526) [ci:skip-build] Already built successfuly on CI in MR
2022-10-12 05:18:04 +00:00
$_config
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
"
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
builddir="$srcdir/linux-$_kernver"
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
prepare() {
default_prepare
REPLACE_GCCH=0 \
. downstreamkernel_prepare
}
build() {
unset LDFLAGS
main/linux-postmarketos-rockchip: upgrade to 5.13.4, use GCC (MR 2372) llvm was left over from Martijn's efforts to reduce the kernel size The drivers for external DP are enabled here, but all patches from manjaro that deal with DP/typec alt mode, etc are dropped since they do not solve anything on their own and may cause display instability issues... [ci:skip-build]: already built successfully in CI
2021-07-21 18:06:40 +00:00
make ARCH="$_carch" \
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
KBUILD_BUILD_VERSION="$((pkgrel + 1 ))-$_flavor"
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
}
package() {
downstreamkernel_package "$builddir" "$pkgdir" "$_carch" "$_flavor"
make -j1 modules_install dtbs_install \
ARCH="$_carch" \
device/pine64-pinebookpro: switch to mainline (MR 2021) * Add u-boot build with a lot of patches that makes the display work in u-boot for boot selection * Upgrade the rockchip kernel to 5.11 mainline with config for the rk3399 devices built-in * Make the rockpro64 and pinebook pro use the newer kernel [ci:skip-build]
2020-08-28 13:50:27 +00:00
INSTALL_MOD_STRIP=1 \
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
INSTALL_MOD_PATH="$pkgdir" \
linux-postmarketos-rockchip: don't use flavor in dtbs path (MR 4298) ..for consistency with other packages and to not confuse utilities which make proper use of flavors [ci:skip-build]: already built successfully in CI
2023-08-01 14:08:58 +00:00
INSTALL_DTBS_PATH="$pkgdir/boot/dtbs"
linux-postmarketos-rockchip: add armv7 config and patch for broken emmc on veyron (MR 2318) [ci:skip-build] Already built on CI in MR
2021-07-23 15:37:08 +00:00
linux-postmarketos-rockchip: drop armv7 and upgrade to 6.0 (MR 3526) [ci:skip-build] Already built successfuly on CI in MR
2022-10-12 05:18:04 +00:00
gzip -v "$pkgdir"/boot/vmlinuz
mv "$pkgdir"/boot/vmlinuz.gz "$pkgdir"/boot/vmlinuz
community/linux-postmarketos-rockchip: Update install for packaging (MR 3899) Add the missing kernel.release file to support packaging and fix builds with: `pmbootstrap build --envkernel linux-postmarketos-rockchip` Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-23 14:17:21 +00:00
install -D "$builddir"/include/config/kernel.release \
"$pkgdir"/usr/share/kernel/$_flavor/kernel.release
device/pine64-{pinebookpro,rockpro64}: new device (MR 882) [ci:skip-build]
2020-04-07 17:56:30 +00:00
}
linux-postmarketos-rockchip: upgrade to 5.13, enable nftables (MR 2299) This switches the config over to one based on Alpine's linux-gru which is for an rk3399 chromebook. It produces way smaller kernels and has more general purpose hardware support.
2021-07-01 22:55:21 +00:00
sha512sums="
community/linux-postmarketos-rockhip: Migrate to linux-6.2 (MR 3899) Update the kernel base and migrate the kernel config. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-23 15:15:49 +00:00
a01bee0b968b95183934fe3504516be7ef5811944a061f5aed05ecebaa27b5eb64e33232fd0a8dd622b3c8743bfe462ef7e464d381734d111a0ad6a6d9f66ddd linux-6.2.tar.xz
linux-postmarketos-rockchip: enable NFS_FSCACHE (MR 4607) [ci:skip-build]: already built successfully in CI
2023-12-08 09:23:37 +00:00
7ad0b22e77e27e2c291e35e806ee6871c85eb95b07e808ac9d91eafec64f7b2b7878f057657b1d699b6a45a22b40f5a9d3912cc2fbd245410d00a6e8fe121a5a config-postmarketos-rockchip.aarch64
linux-postmarketos-rockchip: upgrade to 5.13, enable nftables (MR 2299) This switches the config over to one based on Alpine's linux-gru which is for an rk3399 chromebook. It produces way smaller kernels and has more general purpose hardware support.
2021-07-01 22:55:21 +00:00
"
Reference in a new issue Copy permalink