forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/community/device-motorola-harpia/APKBUILD

47 lines
1.6 KiB
Text
Raw Permalink Normal View History

Initial support for Motorola Moto G4 Play (motorola-harpia) (#1437) Currently, Weston boots with a working touch interface, and USB networking.
2018-04-22 21:12:48 +00:00
# Reference: <https://postmarketos.org/devicepkg>
treewide: remove inactive maintainers (MR 3820) Remove maintainers who could not be reached to test v22.12. Add exkc as maintainer for firmware-pine64-rockpro64 as discussed in review of this patch. [ci:skip-build]: already built successfully in CI
2023-01-22 21:02:00 +00:00
# Maintainer: Minecrell <minecrell@minecrell.net>
*: remove quotes around pkgname (MR 1186) TP:[AL3]:APKBUILD:5:pkgname must not be quoted [skip ci]: won't finish within 3 hours
2020-04-25 09:51:42 +00:00
pkgname=device-motorola-harpia
Initial support for Motorola Moto G4 Play (motorola-harpia) (#1437) Currently, Weston boots with a working touch interface, and USB networking.
2018-04-22 21:12:48 +00:00
pkgdesc="Motorola Moto G4 Play"
device/msm8916*: Generate extlinux.conf (MR 4826) Now as boot-deploy allows us to generate both boot.img and extlinux.conf at the same time, enable generating the config for all msm8916 since it will be used in the future lk2nd release. boot.img is still kept to keep compatibility with current lk2nd releases and to allow system recovery with fastboot when required. [ci:skip-build] already built successfully in CI [ci:ignore-count]
2024-02-15 08:21:05 +00:00
pkgver=9
treewide: drop PMOS_NO_OUTPUT_REDIRECT (MR 5240) This cmdline argument is now a no-op. Drop it everywhere and add a new CI check to enforce this. Adjust the deprecated "minimal" initramfs variant to use pmos.debug-shell to enable logging instead. It doesn't /support/ dropping to a shell, so the variable takes on a different meaning. But that's ok since it's at least more consistent. [ci:ignore-count] [ci:skip-vercheck] Signed-off-by: Caleb Connolly <caleb@postmarketos.org> Tweaked-by: Oliver Smith <ollieparanoid@postmarketos.org> [ci:skip-build]: kernel builds are very likely to go through now
2024-06-18 19:53:59 +00:00
pkgrel=1
Initial support for Motorola Moto G4 Play (motorola-harpia) (#1437) Currently, Weston boots with a working touch interface, and USB networking.
2018-04-22 21:12:48 +00:00
url="https://postmarketos.org"
license="MIT"
motorola-harpia: upgrade to mainline kernel (!682) Support for the downstream kernel has been removed entirely. This is because the downstream kernel only has support for the armhf architecture, whereas linux-postmarketos-qcom-msm8916 is only built for aarch64. Since pmbootstrap has no way to handle having two kernels on differing architectures, the decision was made to remove the downstream kernel and only support mainline.
2019-10-13 11:00:28 +00:00
arch="aarch64"
device-*: don't use noarch anymore Use the device's architecture instead of noarch. Because the device packages should never be built for other architectures, even if all depends can be built for other arches as well. This simplifies package building as part of the new build infrastructure effort. pmbootstrap has also been changed to output this by default in aportgen.
2018-11-07 06:45:58 +00:00
options="!check !archcheck"
community/<msm8916>: use _pmb_select="..." instead of kernel variants (MR 2632)
2021-10-24 12:48:45 +00:00
depends="postmarketos-base mkbootimg linux-postmarketos-qcom-msm8916
soc-qcom-msm8916 soc-qcom-msm8916-rproc"
Initial support for Motorola Moto G4 Play (motorola-harpia) (#1437) Currently, Weston boots with a working touch interface, and USB networking.
2018-04-22 21:12:48 +00:00
makedepends="devicepkg-dev"
device/*: transform deviceinfo_modules_initfs into a file (MR 4169) The file is automatically packed by devicepkg-dev utils Relates #1836
2023-08-02 17:06:01 +00:00
source="deviceinfo modules-initfs"
motorola-harpia: add option to enable modem (!958)
2020-02-04 11:41:38 +00:00
subpackages="
$pkgname-nonfree-firmware:nonfree_firmware
"
community/<msm8916>: use _pmb_select="..." instead of kernel variants (MR 2632)
2021-10-24 12:48:45 +00:00
_pmb_select="soc-qcom-msm8916-rproc"
# Backwards compatibility for old kernel variant subpackages
replaces="$pkgname-kernel-mainline $pkgname-kernel-mainline-modem"
for pkg in $replaces; do provides="$provides $pkg=$pkgver-r$pkgrel"; done
Initial support for Motorola Moto G4 Play (motorola-harpia) (#1437) Currently, Weston boots with a working touch interface, and USB networking.
2018-04-22 21:12:48 +00:00
build() {
devicepkg_build $startdir $pkgname
}
package() {
devicepkg_package $startdir $pkgname
}
motorola-harpia: upgrade to mainline kernel (!682) Support for the downstream kernel has been removed entirely. This is because the downstream kernel only has support for the armhf architecture, whereas linux-postmarketos-qcom-msm8916 is only built for aarch64. Since pmbootstrap has no way to handle having two kernels on differing architectures, the decision was made to remove the downstream kernel and only support mainline.
2019-10-13 11:00:28 +00:00
nonfree_firmware() {
<msm8916+secure boot+venus>: use separate firmware packages (MR 2619) Rule C: Devices with secure boot but without venus on the firmware partition need: 1. GPU firmware (firmware-qcom-adreno-a300) 2. msm-firmware-loader (for wcnss, modem) 4. device-specific -wcnss-nv firmware 5. device-specific -venus firmware
2021-10-19 08:31:47 +00:00
pkgdesc="GPU/WiFi/BT/Modem/Video firmware"
motorola-harpia: use WCNSS firmware from osprey (MR 4034) harpia's WCNSS firmware has problems with WiFi channels on some device variants, using osprey's firmware seems to help as a workaround. Install that by default so WiFi has better chances of working properly out of the box. [ci:skip-build]: already built successfully in CI
2023-04-24 10:37:05 +00:00
# harpia's WCNSS firmware has problems with WiFi channels on some device
# variants, using osprey's firmware seems to help as a workaround
# (see https://gitlab.com/postmarketOS/pmaports/-/issues/1085)
<msm8916+secure boot+venus>: use separate firmware packages (MR 2619) Rule C: Devices with secure boot but without venus on the firmware partition need: 1. GPU firmware (firmware-qcom-adreno-a300) 2. msm-firmware-loader (for wcnss, modem) 4. device-specific -wcnss-nv firmware 5. device-specific -venus firmware
2021-10-19 08:31:47 +00:00
depends="firmware-qcom-adreno-a300 msm-firmware-loader
motorola-harpia: use WCNSS firmware from osprey (MR 4034) harpia's WCNSS firmware has problems with WiFi channels on some device variants, using osprey's firmware seems to help as a workaround. Install that by default so WiFi has better chances of working properly out of the box. [ci:skip-build]: already built successfully in CI
2023-04-24 10:37:05 +00:00
firmware-motorola-harpia-wcnss-nv firmware-motorola-harpia-venus
firmware-motorola-osprey-wcnss"
motorola-harpia: add option to enable modem (!958)
2020-02-04 11:41:38 +00:00
mkdir "$subpkgdir"
}
device/*: set gpu_accelerated for devices that show '3D=Y' on wiki (MR 2078) [ci:ignore-count] [ci:skip-vercheck] needed for the postmarketos-ui-* packages in this series [ci:skip-build] already built ui-* packages in CI, and device pacakges are just trivial deviceinfo change (manually built some just to verify)
2021-07-07 05:06:17 +00:00
sha512sums="
treewide: drop PMOS_NO_OUTPUT_REDIRECT (MR 5240) This cmdline argument is now a no-op. Drop it everywhere and add a new CI check to enforce this. Adjust the deprecated "minimal" initramfs variant to use pmos.debug-shell to enable logging instead. It doesn't /support/ dropping to a shell, so the variable takes on a different meaning. But that's ok since it's at least more consistent. [ci:ignore-count] [ci:skip-vercheck] Signed-off-by: Caleb Connolly <caleb@postmarketos.org> Tweaked-by: Oliver Smith <ollieparanoid@postmarketos.org> [ci:skip-build]: kernel builds are very likely to go through now
2024-06-18 19:53:59 +00:00
31eba51ab586af61d0ea0efb2e0f0a8533524254e864d59bc2142ba30c6b5745a46a00314fbf86a8b5bcfeee2d42b218c27d2e8aa5ed19f24e50468860999e56 deviceinfo
device/*: transform deviceinfo_modules_initfs into a file (MR 4169) The file is automatically packed by devicepkg-dev utils Relates #1836
2023-08-02 17:06:01 +00:00
525a3e20672a7dff26b885b99ee157e0ece33efa10db34c90aed45dc47d7f1c2e90d7082dc84f2724892f199b5adaca04d5864f0aa1d1e4b8ea695f840346d60 modules-initfs
device/*: set gpu_accelerated for devices that show '3D=Y' on wiki (MR 2078) [ci:ignore-count] [ci:skip-vercheck] needed for the postmarketos-ui-* packages in this series [ci:skip-build] already built ui-* packages in CI, and device pacakges are just trivial deviceinfo change (manually built some just to verify)
2021-07-07 05:06:17 +00:00
"
Reference in a new issue Copy permalink