[ Upstream commit 0d7c83463f ]
Instead of EINVAL which should be used for malformed netlink messages.
Fixes: eb31628e37 ("netfilter: nf_tables: Add support for IPv6 NAT")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3054d06719 ]
If audit_list_rules_send() fails when trying to create a new thread
to send the rules it also fails to cleanup properly, leaking a
reference to a net structure. This patch fixes the error patch and
renames audit_send_list() to audit_send_list_thread() to better
match its cousin, audit_send_reply_thread().
Reported-by: teroincn@gmail.com
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c03ee9af4e ]
Currently the bcm_uart_subver_ and bcm_usb_subver_table-s lack entries
for the BCM4324B5 and BCM20703A1 chipsets. This makes the code use just
"BCM" as prefix for the filename to pass to request-firmware, making it
harder for users to figure out which firmware they need. This especially
is problematic with the UART attached BCM4324B5 where this leads to the
filename being just "BCM.hcd".
Add the 2 missing devices to subver tables. This has been tested on:
1. A Dell XPS15 9550 where this makes btbcm.c try to load
"BCM20703A1-0a5c-6410.hcd" before it tries to load "BCM-0a5c-6410.hcd".
2. A Thinkpad 8 where this makes btbcm.c try to load
"BCM4324B5.hcd" before it tries to load "BCM.hcd"
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 269b3a9ac5 ]
In the current code, if CONFIG_SWIOTLB is set, when failed to get IO TLB
memory from the low pages by plat_swiotlb_setup(), it may lead to the boot
process failed with kernel panic.
(1) On the Loongson and SiByte platform
arch/mips/loongson64/dma.c
arch/mips/sibyte/common/dma.c
void __init plat_swiotlb_setup(void)
{
swiotlb_init(1);
}
kernel/dma/swiotlb.c
void __init
swiotlb_init(int verbose)
{
...
vstart = memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE);
if (vstart && !swiotlb_init_with_tbl(vstart, io_tlb_nslabs, verbose))
return;
...
pr_warn("Cannot allocate buffer");
no_iotlb_memory = true;
}
phys_addr_t swiotlb_tbl_map_single()
{
...
if (no_iotlb_memory)
panic("Can not allocate SWIOTLB buffer earlier ...");
...
}
(2) On the Cavium OCTEON platform
arch/mips/cavium-octeon/dma-octeon.c
void __init plat_swiotlb_setup(void)
{
...
octeon_swiotlb = memblock_alloc_low(swiotlbsize, PAGE_SIZE);
if (!octeon_swiotlb)
panic("%s: Failed to allocate %zu bytes align=%lx\n",
__func__, swiotlbsize, PAGE_SIZE);
...
}
Because IO_TLB_DEFAULT_SIZE is 64M, if the rest size of low memory is less
than 64M when call plat_swiotlb_setup(), we can easily reproduce the panic
case.
In order to reduce the possibility of kernel panic when failed to get IO
TLB memory under CONFIG_SWIOTLB, it is better to allocate low memory as
small as possible before plat_swiotlb_setup(), so make sparse_init() using
top-down allocation.
Reported-by: Juxin Gao <gaojuxin@loongson.cn>
Co-developed-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Juxin Gao <gaojuxin@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd844fb8e5 ]
Enabling CONFIG_DMA_API_DEBUG=y and CONFIG_DMA_API_DEBUG_SG=y will
enable extra validation on DMA operations ensuring that the size
restraints are met.
When using the FCP in conjunction with the VSP1/DU, and display frames,
the size of the DMA operations is larger than the default maximum
segment size reported by the DMA core (64K). With the DMA debug enabled,
this produces a warning such as the following:
"DMA-API: rcar-fcp fea27000.fcp: mapping sg segment longer than device
claims to support [len=3145728] [max=65536]"
We have no specific limitation on the segment size which isn't already
handled by the VSP1/DU which actually handles the DMA allcoations and
buffer management, so define a maximum segment size of up to 4GB (a 32
bit mask).
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 7b49235e83 ("[media] v4l: Add Renesas R-Car FCP driver")
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96f3a93927 ]
Currently when i2c transfers fail the error return -EREMOTEIO
is assigned to err but then later overwritten when the tuner
attach call is made. Fix this by returning early with the
error return code -EREMOTEIO on i2c transfer failure errors.
If the transfer fails, an uninitialized value will be read from b2.
Addresses-Coverity: ("Unused value")
Fixes: fbfee8684f ("V4L/DVB (5651): Dibusb-mb: convert pll handling to properly use dvb-pll")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a48b284b40 ]
If audit_send_reply() fails when trying to create a new thread to
send the reply it also fails to cleanup properly, leaking a reference
to a net structure. This patch fixes the error path and makes a
handful of other cleanups that came up while fixing the code.
Reported-by: teroincn@gmail.com
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0ff9b5907 ]
Add property "pinctrl-names" to swap pin mode between gpio and dpi mode.
Set the dpi pins to gpio mode and output-low to avoid leakage current
when dpi disabled.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a34c7f5156 ]
Variables declared in a switch statement before any case statements
cannot be automatically initialized with compiler instrumentation (as
they are not part of any execution flow). With GCC's proposed automatic
stack variable initialization feature, this triggers a warning (and they
don't get initialized). Clang's automatic stack variable initialization
(via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also
doesn't initialize such variables[1]. Note that these warnings (or silent
skipping) happen before the dead-store elimination optimization phase,
so even when the automatic initializations are later elided in favor of
direct initializations, the warnings remain.
To avoid these problems, move such variables into the "case" where
they're used or lift them up into the main function body.
drivers/net/ethernet/intel/e1000/e1000_main.c: In function ‘e1000_xmit_frame’:
drivers/net/ethernet/intel/e1000/e1000_main.c:3143:18: warning: statement will never be executed [-Wswitch-unreachable]
3143 | unsigned int pull_size;
| ^~~~~~~~~
[1] https://bugs.llvm.org/show_bug.cgi?id=44916
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c6fddb28ba ]
The xxx_mountpoint() interface provided by fs.c finds mount points for
common pseudo filesystems. The first time xxx_mountpoint() is invoked,
it scans the mount table (/proc/mounts) looking for a match. If found,
it is cached. The price to scan /proc/mounts is paid once if the mount
is found.
When the mount point is not found, subsequent calls to xxx_mountpoint()
scan /proc/mounts over and over again. There is no caching.
This causes a scaling issue in perf record with hugeltbfs__mountpoint().
The function is called for each process found in
synthesize__mmap_events(). If the machine has thousands of processes
and if the /proc/mounts has many entries this could cause major overhead
in perf record. We have observed multi-second slowdowns on some
configurations.
As an example on a laptop:
Before:
$ sudo umount /dev/hugepages
$ strace -e trace=openat -o /tmp/tt perf record -a ls
$ fgrep mounts /tmp/tt
285
After:
$ sudo umount /dev/hugepages
$ strace -e trace=openat -o /tmp/tt perf record -a ls
$ fgrep mounts /tmp/tt
1
One could argue that the non-caching in case the moint point is not
found is intentional. That way subsequent calls may discover a moint
point if the sysadmin mounts the filesystem. But the same argument could
be made against caching the mount point. It could be unmounted causing
errors. It all depends on the intent of the interface. This patch
assumes it is expected to scan /proc/mounts once. The patch documents
the caching behavior in the fs.h header file.
An alternative would be to just fix perf record. But it would solve the
problem with hugetlbs__mountpoint() but there could be similar issues
(possibly down the line) with other xxx_mountpoint() calls in perf or
other tools.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrey Zhizhikin <andrey.z@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20200402154357.107873-3-irogers@google.com
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bf9917452 ]
vm_map_ram can keep mappings around after the vm_unmap_ram. Using that
with non-PAGE_KERNEL mappings can lead to all kinds of aliasing issues.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-4-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e1c6846b9 ]
The value adapter->rss_conf is stored in DMA memory, and it is assigned
to rssConf, so rssConf->indTableSize can be modified at anytime by
malicious hardware. Because rssConf->indTableSize is assigned to n,
buffer overflow may occur when the code "rssConf->indTable[n]" is
executed.
To fix this possible bug, n is checked after being used.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7d31e6536 ]
The problem the patch is trying to address is the fact that 'struct
kvm_hyperv_exit' has different layout on when compiling in 32 and 64 bit
modes.
In 64-bit mode the default alignment boundary is 64 bits thus
forcing extra gaps after 'type' and 'msr' but in 32-bit mode the
boundary is at 32 bits thus no extra gaps.
This is an issue as even when the kernel is 64 bit, the userspace using
the interface can be both 32 and 64 bit but the same 32 bit userspace has
to work with 32 bit kernel.
The issue is fixed by forcing the 64 bit layout, this leads to ABI
change for 32 bit builds and while we are obviously breaking '32 bit
userspace with 32 bit kernel' case, we're fixing the '32 bit userspace
with 64 bit kernel' one.
As the interface has no (known) users and 32 bit KVM is rather baroque
nowadays, this seems like a reasonable decision.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200424113746.3473563-2-arilou@gmail.com>
Reviewed-by: Roman Kagan <rvkagan@yandex-team.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46164fde6b ]
Tx-only DMA transfers are working perfectly fine since in this case
the code just ignores the Rx FIFO overflow interrupts. But it turns
out the SPI Rx-only transfers are broken since nothing pushing any
data to the shift registers, so the Rx FIFO is left empty and the
SPI core subsystems just returns a timeout error. Since DW DMAC
driver doesn't support something like cyclic write operations of
a single byte to a device register, the only way to support the
Rx-only SPI transfers is to fake it by using a dummy Tx-buffer.
This is what we intend to fix in this commit by setting the
SPI_CONTROLLER_MUST_TX flag for DMA-capable platform.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200529131205.31838-9-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ad346c905 ]
The commit 8c46fcd783 ("batman-adv: disable ethtool link speed detection
when auto negotiation off") disabled the usage of ethtool's link_ksetting
when auto negotation was enabled due to invalid values when used with
tun/tap virtual net_devices. According to the patch, automatic measurements
should be used for these kind of interfaces.
But there are major flaws with this argumentation:
* automatic measurements are not implemented
* auto negotiation has nothing to do with the validity of the retrieved
values
The first point has to be fixed by a longer patch series. The "validity"
part of the second point must be addressed in the same patch series by
dropping the usage of ethtool's link_ksetting (thus always doing automatic
measurements over ethernet).
Drop the patch again to have more default values for various net_device
types/configurations. The user can still overwrite them using the
batadv_hardif's BATADV_ATTR_THROUGHPUT_OVERRIDE.
Reported-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1de94380a ]
Recent work with KASan exposed the folling hard-coded bitmask
in arch/arm/mm/proc-macros.S:
bic rd, sp, #8128
bic rd, rd, #63
This forms the bitmask 0x1FFF that is coinciding with
(PAGE_SIZE << THREAD_SIZE_ORDER) - 1, this code was assuming
that THREAD_SIZE is always 8K (8192).
As KASan was increasing THREAD_SIZE_ORDER to 2, I ran into
this bug.
Fix it by this little oneline suggested by Ard:
bic rd, sp, #(THREAD_SIZE - 1) & ~63
Where THREAD_SIZE is defined using THREAD_SIZE_ORDER.
We have to also include <linux/const.h> since the THREAD_SIZE
expands to use the _AC() macro.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e4a3f7ed5 ]
We are currently treating any non-zero return value from btrfs_next_leaf()
the same way, by going to the code that inserts a new checksum item in the
tree. However if btrfs_next_leaf() returns an error (a value < 0), we
should just stop and return the error, and not behave as if nothing has
happened, since in that case we do not have a way to know if there is a
next leaf or we are currently at the last leaf already.
So fix that by returning the error from btrfs_next_leaf().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d2e16a318 ]
Commit 1002148899 ("clocksource: dw_apb_timer_of: use
clocksource_of_init") replaced a publicly available driver
initialization method with one called by the timer_probe() method
available after CLKSRC_OF. In current implementation it traverses
all the timers available in the system and calls their initialization
methods if corresponding devices were either in dtb or in acpi. But
if before the commit any number of available timers would be installed
as clockevent and clocksource devices, after that there would be at most
two. The rest are just ignored since default case branch doesn't do
anything. I don't see a reason of such behaviour, neither the commit
message explains it. Moreover this might be wrong if on some platforms
these timers might be used for different purpose, as virtually CPU-local
clockevent timers and as an independent broadcast timer. So in order
to keep the compatibility with the platforms where the order of the
timers detection has some meaning, lets add the secondly discovered
timer to be of clocksource/sched_clock type, while the very first and
the others would provide the clockevents service.
Fixes: 1002148899 ("clocksource: dw_apb_timer_of: use clocksource_of_init")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-7-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cee43dbf2e ]
Currently the DW APB Timer driver binds each clockevent timers to a
particular CPU. This isn't good for multiple reasons. First of all seeing
the device is placed on APB bus (which makes it accessible from any CPU
core), accessible over MMIO and having the DYNIRQ flag set we can be sure
that manually binding the timer to any CPU just isn't correct. By doing
so we just set an extra limitation on device usage. This also doesn't
reflect the device actual capability, since by setting the IRQ affinity
we can make it virtually local to any CPU. Secondly imagine if you had a
real CPU-local timer with the same rating and the same CPU-affinity.
In this case if DW APB timer was registered first, then due to the
clockevent framework tick-timer selection procedure we'll end up with the
real CPU-local timer being left unselected for clock-events tracking. But
on most of the platforms (MIPS/ARM/etc) such timers are normally embedded
into the CPU core and are accessible with much better performance then
devices placed on APB. For instance in MIPS architectures there is
r4k-timer, which is CPU-local, assigned with the same rating, and normally
its clockevent device is registered after the platform-specific one.
So in order to fix all of these issues let's make the DW APB Timer CPU
affinity being optional and deactivated by passing a negative CPU id,
which will effectively set the DW APB clockevent timer cpumask to
'cpu_possible_mask'.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200521204818.25436-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43dba9f3f9 ]
It's pointless to track the Tx overrun interrupts if Rx-only SPI
transfer is issued. Similarly there is no need in handling the Rx
overrun/underrun interrupts if Tx-only SPI transfer is executed.
So lets unmask the interrupts only if corresponding SPI
transactions are implied.
Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20200522000806.7381-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ca676e4ca ]
If we detect that we recursively entered the debugger we should hack
our I/O ops to NULL so that the panic() in the next line won't
actually cause another recursion into the debugger. The first line of
kgdb_panic() will check this and return.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200507130644.v4.6.I89de39f68736c9de610e6f241e68d8dbc44bc266@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 202164fbfa ]
In commit 81eaadcae8 ("kgdboc: disable the console lock when in
kgdb") we avoided the WARN_CONSOLE_UNLOCKED() yell when we were in
kgdboc. That still works fine, but it turns out that we get a similar
yell when using other I/O drivers. One example is the "I/O driver"
for the kgdb test suite (kgdbts). When I enabled that I again got the
same yells.
Even though "kgdbts" doesn't actually interact with the user over the
console, using it still causes kgdb to print to the consoles. That
trips the same warning:
con_is_visible+0x60/0x68
con_scroll+0x110/0x1b8
lf+0x4c/0xc8
vt_console_print+0x1b8/0x348
vkdb_printf+0x320/0x89c
kdb_printf+0x68/0x90
kdb_main_loop+0x190/0x860
kdb_stub+0x2cc/0x3ec
kgdb_cpu_enter+0x268/0x744
kgdb_handle_exception+0x1a4/0x200
kgdb_compiled_brk_fn+0x34/0x44
brk_handler+0x7c/0xb8
do_debug_exception+0x1b4/0x228
Let's increment/decrement the "ignore_console_lock_warning" variable
all the time when we enter the debugger.
This will allow us to later revert commit 81eaadcae8 ("kgdboc:
disable the console lock when in kgdb").
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20200507130644.v4.1.Ied2b058357152ebcc8bf68edd6f20a11d98d7d4e@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56b5453a86 ]
Bluetooth PTS test case HFP/AG/ACC/BI-12-I accepts SCO connection
with invalid parameter at the first SCO request expecting AG to
attempt another SCO request with the use of "safe settings" for
given codec, base on section 5.7.1.2 of HFP 1.7 specification.
This patch addresses it by adding "Invalid LMP Parameters" (0x1e)
to the SCO fallback case. Verified with below log:
< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
Handle: 256
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 13
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02)
Packet type: 0x0380
3-EV3 may not be used
2-EV5 may not be used
3-EV5 may not be used
> HCI Event: Command Status (0x0f) plen 4
Setup Synchronous Connection (0x01|0x0028) ncmd 1
Status: Success (0x00)
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 256
Count: 1
> HCI Event: Max Slots Change (0x1b) plen 3
Handle: 256
Max slots: 1
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
Status: Invalid LMP Parameters / Invalid LL Parameters (0x1e)
Handle: 0
Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC)
Link type: eSCO (0x02)
Transmission interval: 0x00
Retransmission window: 0x02
RX packet length: 0
TX packet length: 0
Air mode: Transparent (0x03)
< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
Handle: 256
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 8
Setting: 0x0003
Input Coding: Linear
Input Data Format: 1's complement
Input Sample Size: 8-bit
# of bits padding at MSB: 0
Air Coding Format: Transparent Data
Retransmission effort: Optimize for link quality (0x02)
Packet type: 0x03c8
EV3 may be used
2-EV3 may not be used
3-EV3 may not be used
2-EV5 may not be used
3-EV5 may not be used
> HCI Event: Command Status (0x0f) plen 4
Setup Synchronous Connection (0x01|0x0028) ncmd 1
Status: Success (0x00)
> HCI Event: Max Slots Change (0x1b) plen 3
Handle: 256
Max slots: 5
> HCI Event: Max Slots Change (0x1b) plen 3
Handle: 256
Max slots: 1
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
Status: Success (0x00)
Handle: 257
Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC)
Link type: eSCO (0x02)
Transmission interval: 0x06
Retransmission window: 0x04
RX packet length: 30
TX packet length: 30
Air mode: Transparent (0x03)
Signed-off-by: Hsin-Yu Chao <hychao@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a44de7497f ]
When ATI Radeon GPU driver has been compiled directly into the kernel
instead of as a module, we should make sure the firmware for the model
(check available ones in /lib/firmware/radeon) is built-in to the kernel
as well, otherwise there exists the following fatal error during GPU init,
change CONFIG_DRM_RADEON=y to CONFIG_DRM_RADEON=m to fix it.
[ 1.900997] [drm] Loading RS780 Microcode
[ 1.905077] radeon 0000:01:05.0: Direct firmware load for radeon/RS780_pfp.bin failed with error -2
[ 1.914140] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin"
[ 1.920405] [drm:r600_init] *ERROR* Failed to load firmware!
[ 1.926069] radeon 0000:01:05.0: Fatal error during GPU init
[ 1.931729] [drm] radeon: finishing device.
Fixes: 024e6a8b5b ("MIPS: Loongson: Add a Loongson-3 default config file")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88eb0ee17b ]
The ixgbe driver have another memory model when compiled on archs with
PAGE_SIZE above 4096 bytes. In this mode it doesn't split the page in
two halves, but instead increment rx_buffer->page_offset by truesize of
packet (which include headroom and tailroom for skb_shared_info).
This is done correctly in ixgbe_build_skb(), but in ixgbe_rx_buffer_flip
which is currently only called on XDP_TX and XDP_REDIRECT, it forgets
to add the tailroom for skb_shared_info. This breaks XDP_REDIRECT, for
veth and cpumap. Fix by adding size of skb_shared_info tailroom.
Maintainers notice: This fix have been queued to Jeff.
Fixes: 6453073987 ("ixgbe: add initial support for xdp redirect")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Link: https://lore.kernel.org/bpf/158945344946.97035.17031588499266605743.stgit@firesoul
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 579d1b3faa ]
This patch fixes two issues present in the current function for encoding
arm64 logical immediates when using the 32-bit variants of instructions.
First, the code does not correctly reject an all-ones 32-bit immediate,
and returns an undefined instruction encoding.
Second, the code incorrectly rejects some 32-bit immediates that are
actually encodable as logical immediates. The root cause is that the code
uses a default mask of 64-bit all-ones, even for 32-bit immediates.
This causes an issue later on when the default mask is used to fill the
top bits of the immediate with ones, shown here:
/*
* Pattern: 0..01..10..01..1
*
* Fill the unused top bits with ones, and check if
* the result is a valid immediate (all ones with a
* contiguous ranges of zeroes).
*/
imm |= ~mask;
if (!range_of_ones(~imm))
return AARCH64_BREAK_FAULT;
To see the problem, consider an immediate of the form 0..01..10..01..1,
where the upper 32 bits are zero, such as 0x80000001. The code checks
if ~(imm | ~mask) contains a range of ones: the incorrect mask yields
1..10..01..10..0, which fails the check; the correct mask yields
0..01..10..0, which succeeds.
The fix for both issues is to generate a correct mask based on the
instruction immediate size, and use the mask to check for all-ones,
all-zeroes, and values wider than the mask.
Currently, arch/arm64/kvm/va_layout.c is the only user of this function,
which uses 64-bit immediates and therefore won't trigger these bugs.
We tested the new code against llvm-mc with all 1,302 encodable 32-bit
logical immediates and all 5,334 encodable 64-bit logical immediates.
Fixes: ef3935eeeb ("arm64: insn: Add encoder for bitwise operations using literals")
Suggested-by: Will Deacon <will@kernel.org>
Co-developed-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200508181547.24783-2-luke.r.nels@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cb97e223d ]
Some DMA controller drivers do not tolerate non-zero values in
the DMA configuration structures. Zero them to avoid issues with
such DMA controller drivers. Even despite above this is a good
practice per se.
Fixes: 7063c0d942 ("spi/dw_spi: add DMA support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Feng Tang <feng.tang@intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20200506153025.21441-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab8ad279ce ]
flush_icache_range() contains a bodge to avoid issuing IPIs when the kgdb
trap handler is running because issuing IPIs is unsafe (and not needed)
in this execution context. However the current test, based on
kgdb_connected is flawed: it both over-matches and under-matches.
The over match occurs because kgdb_connected is set when gdb attaches
to the stub and remains set during normal running. This is relatively
harmelss because in almost all cases irq_disabled() will be false.
The under match is more serious. When kdb is used instead of kgdb to access
the debugger then kgdb_connected is not set in all the places that the
debug core updates sw breakpoints (and hence flushes the icache). This
can lead to deadlock.
Fix by replacing the ad-hoc check with the proper kgdb macro. This also
allows us to drop the #ifdef wrapper.
Fixes: 3b8c9f1cdf ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200504170518.2959478-1-daniel.thompson@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f77767ed5f ]
When building the x86 EFI stub with Clang, the libstub Makefile rules
that manipulate the ELF object files may throw an error like:
STUBCPY drivers/firmware/efi/libstub/efi-stub-helper.stub.o
strip: drivers/firmware/efi/libstub/efi-stub-helper.stub.o: Failed to find link section for section 10
objcopy: drivers/firmware/efi/libstub/efi-stub-helper.stub.o: Failed to find link section for section 10
This is the result of a LLVM feature [0] where symbol references are
stored in a LLVM specific .llvm_addrsig section in a non-transparent way,
causing generic ELF tools such as strip or objcopy to choke on them.
So force the compiler not to emit these sections, by passing the
appropriate command line option.
[0] https://sourceware.org/bugzilla/show_bug.cgi?id=23817
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9a1de378d ]
In case the "func" parameter is NULL we now return "-EINVAL".
This shouldn't happen in general, but when it does happen, this is the
proper way to handle it.
We also check func for NULL in the beginning of the function, as there
is no reason to do all the work and realize in the end of the function
it was useless.
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0f23741c2 ]
This patch fixes potential crash in case if hw_get_regs is NULL.
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6eefaee4f2 ]
With a couple allies at Intel, and much badgering, I got confirmation
from Intel that at least BXT suffers from the same SPI chip-select
issue as Cannonlake (and beyond). The issue being that after going
through runtime suspend/resume, toggling the chip-select line without
also sending data does nothing.
Add the quirk to BXT to briefly toggle dynamic clock gating off and
on, forcing the fabric to wake up enough to notice the CS register
change.
Signed-off-by: Evan Green <evgreen@chromium.org>
Cc: Shobhit Srivastava <shobhit.srivastava@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200427163238.1.Ib1faaabe236e37ea73be9b8dcc6aa034cb3c8804@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7170cf47d1 ]
The .alternatives section can contain entries with no original
instructions. Objtool will currently crash when handling such an entry.
Just skip that entry, but still give a warning to discourage useless
entries.
Signed-off-by: Julien Thierry <jthierry@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e955f959ac ]
Getting the Xtal trim property to check if running is less error prone.
Reset if_frequency if state is unknown.
Replaces the previous "garbage check".
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eebac67855 ]
DMADEVICES is the top-level option for the slave DMA
subsystem, and should not be selected by device drivers,
as this can cause circular dependencies such as:
drivers/net/ethernet/freescale/Kconfig:6:error: recursive dependency detected!
drivers/net/ethernet/freescale/Kconfig:6: symbol NET_VENDOR_FREESCALE depends on PPC_BESTCOMM
drivers/dma/bestcomm/Kconfig:6: symbol PPC_BESTCOMM depends on DMADEVICES
drivers/dma/Kconfig:6: symbol DMADEVICES is selected by CRYPTO_DEV_SP_CCP
drivers/crypto/ccp/Kconfig:10: symbol CRYPTO_DEV_SP_CCP depends on CRYPTO
crypto/Kconfig:16: symbol CRYPTO is selected by LIBCRC32C
lib/Kconfig:222: symbol LIBCRC32C is selected by LIQUIDIO
drivers/net/ethernet/cavium/Kconfig:65: symbol LIQUIDIO depends on PTP_1588_CLOCK
drivers/ptp/Kconfig:8: symbol PTP_1588_CLOCK is implied by FEC
drivers/net/ethernet/freescale/Kconfig:23: symbol FEC depends on NET_VENDOR_FREESCALE
The LIQUIDIO driver causing this problem is addressed in a
separate patch, but this change is needed to prevent it from
happening again.
Using "depends on DMADEVICES" is what we do for all other
implementations of slave DMA controllers as well.
Fixes: b3c2fee5d6 ("crypto: ccp - Ensure all dependencies are specified")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b97b6a1f6e ]
ADV7511 support sample rates up to 192kHz. CTS and N parameters should
be computed accordingly so this commit extend the list up to maximum
supported sample rate.
Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200413113513.86091-2-bogdan.togorean@analog.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e5c399b0bd upstream.
Commit ea6f3af4c5 ("ACPI: GED: add support for _Exx / _Lxx handler
methods") added a reference to the 'triggering' field of either the
normal or the extended ACPI IRQ resource struct, but inadvertently used
the wrong pointer in the latter case. Note that both pointers refer to the
same union, and the 'triggering' field appears at the same offset in both
struct types, so it currently happens to work by accident. But let's fix
it nonetheless
Fixes: ea6f3af4c5 ("ACPI: GED: add support for _Exx / _Lxx handler methods")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0370964dd3 upstream.
On a VHE system, the EL1 state is left in the CPU most of the time,
and only syncronized back to memory when vcpu_put() is called (most
of the time on preemption).
Which means that when injecting an exception, we'd better have a way
to either:
(1) write directly to the EL1 sysregs
(2) synchronize the state back to memory, and do the changes there
For an AArch64, we already do (1), so we are safe. Unfortunately,
doing the same thing for AArch32 would be pretty invasive. Instead,
we can easily implement (2) by calling the put/load architectural
backends, and keep preemption disabled. We can then reload the
state back into EL1.
Cc: stable@vger.kernel.org
Reported-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c8d70a29d6 upstream.
backend_connect() can fail, so switch the device to connected only if
no error occurred.
Fixes: 0a9c75c2c7 ("xen/pvcalls: xenbus state handling")
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200511074231.19794-1-jgross@suse.com
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f04086c225 upstream.
During some scenarios mmc_sdio_init_card() runs a retry path for the UHS-I
specific initialization, which leads to removal of the previously allocated
card. A new card is then re-allocated while retrying.
However, in one of the corresponding error paths we may end up to remove an
already removed card, which likely leads to a NULL pointer exception. So,
let's fix this.
Fixes: 5fc3d80ef4 ("mmc: sdio: don't use rocr to check if the card could support UHS mode")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20200430091640.455-2-ulf.hansson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1af7f36c7 upstream.
Remove non-removable and mmc-ddr-1_8v properties from the sdmmc0
node which come probably from an unchecked copy/paste.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes:42ed535595ec "ARM: dts: at91: introduce the sama5d2 ptc ek board"
Cc: stable@vger.kernel.org # 4.19 and later
Link: https://lore.kernel.org/r/20200401221504.41196-1-ludovic.desroches@microchip.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9253d71011 upstream.
Clear tuning_done flag while executing tuning to ensure vendor
specific HS400 settings are applied properly when the controller
is re-initialized in HS400 mode.
Without this, re-initialization of the qcom SDHC in HS400 mode fails
while resuming the driver from runtime-suspend or system-suspend.
Fixes: ff06ce4178 ("mmc: sdhci-msm: Add HS400 platform support")
Cc: stable@vger.kernel.org
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Link: https://lore.kernel.org/r/1590678838-18099-1-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f30d3ced9f upstream.
After changing the timing between GTT updates and execution on the GPU,
we started seeing sporadic failures on Ironlake. These were narrowed
down to being an insufficiently strong enough barrier/delay after
updating the GTT and scheduling execution on the GPU. By forcing the
uncached read, and adding the missing barrier for the singular
insert_page (relocation paths), the sporadic failures go away.
Fixes: 983d308cb8 ("agp/intel: Serialise after GTT updates")
Fixes: 3497971a71 ("agp/intel: Flush chipset writes after updating a single PTE")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Cc: stable@vger.kernel.org # v4.0+
Link: https://patchwork.freedesktop.org/patch/msgid/20200410083535.25464-1-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ed6edd33a upstream.
Under rare circumstances, task_function_call() can repeatedly fail and
cause a soft lockup.
There is a slight race where the process is no longer running on the cpu
we targeted by the time remote_function() runs. The code will simply
try again. If we are very unlucky, this will continue to fail, until a
watchdog fires. This can happen in a heavily loaded, multi-core virtual
machine.
Reported-by: syzbot+bb4935a5c09b5ff79940@syzkaller.appspotmail.com
Signed-off-by: Barret Rhoden <brho@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200414222920.121401-1-brho@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1b65750b8 upstream.
If FAT length == 0, the image doesn't have any data. And it can be the
cause of overlapping the root dir and FAT entries.
Also Windows treats it as invalid format.
Reported-by: syzbot+6f1624f937d9d6911e2d@syzkaller.appspotmail.com
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: http://lkml.kernel.org/r/87r1wz8mrd.fsf@mail.parknet.co.jp
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ea2ea42b3 upstream.
We need to keep the reference to the drm_gem_object
until the last access by vkms_dumb_create.
Therefore, the put the object after it is used.
This fixes a use-after-free issue reported by syzbot.
While here, change vkms_gem_create() symbol to static.
Reported-and-tested-by: syzbot+e3372a2afe1e7ef04bc7@syzkaller.appspotmail.com
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200427214405.13069-1-ezequiel@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
