I observed the following deadlock between them:
[task 1] [task 2] [task 3]
kill_fasync() mm_update_next_owner() copy_process()
spin_lock_irqsave(&fa->fa_lock) read_lock(&tasklist_lock) write_lock_irq(&tasklist_lock)
send_sigio() <IRQ> ...
read_lock(&fown->lock) kill_fasync() ...
read_lock(&tasklist_lock) spin_lock_irqsave(&fa->fa_lock) ...
Task 1 can't acquire read locked tasklist_lock, since there is
already task 3 expressed its wish to take the lock exclusive.
Task 2 holds the read locked lock, but it can't take the spin lock.
Also, there is possible another deadlock (which I haven't observed):
[task 1] [task 2]
f_getown() kill_fasync()
read_lock(&f_own->lock) spin_lock_irqsave(&fa->fa_lock,)
<IRQ> send_sigio() write_lock_irq(&f_own->lock)
kill_fasync() read_lock(&fown->lock)
spin_lock_irqsave(&fa->fa_lock,)
Actually, we do not need exclusive fa->fa_lock in kill_fasync_rcu(),
as it guarantees fa->fa_file->f_owner integrity only. It may seem,
that it used to give a task a small possibility to receive two sequential
signals, if there are two parallel kill_fasync() callers, and task
handles the first signal fastly, but the behaviour won't become
different, since there is exclusive sighand lock in do_send_sig_info().
The patch converts fa_lock into rwlock_t, and this fixes two above
deadlocks, as rwlock is allowed to be taken from interrupt handler
by qrwlock design.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
trivial fix to spelling mistake in dev_error message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
This patch replaces the (1 << n) with BIT(n) and cleans up whitespace,
no functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
The controller clock can be switched off during suspend/resume,
let runtime PM take care of that.
Signed-off-by: Dien Pham <dien.pham.ry@rvc.renesas.com>
Signed-off-by: Hien Dang <hien.dang.eb@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-renesas-soc@vger.kernel.org
To: linux-pci@vger.kernel.org
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
INITRD reserved area entry is not removed from memblock
even though initrd reserved area is freed. After freeing
the memory it is released from memblock. The same can be
checked from /sys/kernel/debug/memblock/reserved.
The patch makes sure that the initrd entry is removed from
memblock when keepinitrd is not enabled.
The patch only affects accounting and debugging. This does not
fix any memory leak.
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: CHANDAN VN <chandan.vn@samsung.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The comment of vti6_ioctl() is wrong. which use vti6_tnl_ioctl
instead of vti6_ioctl.
Signed-off-by: Sun Lianwen <sunlw.fnst@cn.fujitsu.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Commit 5d3b50d3c0 ("ARM: dts: renesas: r8a7790: Add FDP1 instances")
introduced the FDP1 for the r8a7790, but broke the sort ordering of the
device tree nodes.
Move the last VSP up to it's peers to correct the ordering.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJa55HYAAoJEAAOaEEZVoIVbr4QAICUweu5RqbcNm6/zGZkYJvP
Cmk9bRhqluM3sx7RpDpsgde12z5j6qt+MbS1k+uZ7+V5gsO25jYuQYNGs6io6IEL
WzO81HsMmqqqV30MI0/S4ffaYDtqTfJdKkbWvvV7aoFUZpz5oHNjqQM30hSRzy+i
1e6EfxtzUvaavekCvVCqQoDwXWMp1jaxCIFPNiIY82NPmszovydaZiZORL6qRXIM
x/n3gWLJv2c0iRr6PBLIwKVOqPmdWwsmgSXTvP5/IH6LuQOZjmfHCJaxA8HZeFyz
WvVTaH7aGtYp/pZt6UzvUlCXXcDKVYR4RmCfHW5+OXBsRQPfkSWKRguDXsvedrHe
vQN7csCR47AwBsGtli6EF/VzwQnbCLjxOJ8kxVItPHlplYWeRsQCNw0JT9i6wB2k
OIuRwekQTYUTXAHYm7XM21wS+JJbcTfANIfmmmfIrcF/Z/Zard5/UuCPSaKcizTy
+qVhYE7m+cNYvARgxYrDvCXO7fnef6fj+cC4DrPmqfkvaJfd4U61Yls7QDi9NuO9
DNehjrWOR1ZLlI98aHjs65tilVFA++k2YdR8283ZqXE1tksUI3w/JvBa/h/H/9lr
F290fgEe31yMAv3ky0QKm3Glr5Qu9I6AOSWWIHCmW7w6CkFB/K/1iKgy3h2g6rPL
3cMUf/uV4mA9RzAhSgx3
=pLgb
-----END PGP SIGNATURE-----
Merge tag 'errseq-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull errseq infrastructure fix from Jeff Layton:
"The PostgreSQL developers recently had a spirited discussion about the
writeback error handling in Linux, and reached out to us about a
behavoir change to the code that bit them when the errseq_t changes
were merged.
When we changed to using errseq_t for tracking writeback errors, we
lost the ability for an application to see a writeback error that
occurred before the open on which the fsync was issued. This was
problematic for PostgreSQL which offloads fsync calls to a completely
separate process from the DB writers.
This patch restores that ability. If the errseq_t value in the inode
does not have the SEEN flag set, then we just return 0 for the sample.
That ensures that any recorded error is always delivered at least
once.
Note that we might still lose the error if the inode gets evicted from
the cache before anything can reopen it, but that was the case before
errseq_t was merged. At LSF/MM we had some discussion about keeping
inodes with unreported writeback errors around in the cache for longer
(possibly indefinitely), but that's really a separate problem"
* tag 'errseq-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
errseq: Always report a writeback error once
On clock recovery this function is called to find out
the max voltage swing level that we could go.
However gen 9 functions use the old buffer translation tables
to figure that out. ICL uses different set of tables for eDP
and DP for both Combo and MG PHY ports. This patch adds the hook
for ICL for getting this information from appropriate buf trans tables.
v5 (from Paulo):
* New rebase after changes to earlier patches.
v4:
* Rebase.
v3:
* Follow the coding conventions here
(https://cgit.freedesktop.org/drm-intel/tree/Documentation/process/codin
g-style.rst#n191) (Paulo)
v2:
* Rebase after patch that adds voltage check inside buf trans
function (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-9-paulo.r.zanoni@intel.com
This is an important part of the DDI initalization as well as
for changing the voltage during DisplayPort link training.
The Voltage swing seqeuence is similar to Cannonlake.
However it has different register definitions and hence
it makes sense to create a separate vswing sequence and
program functions for ICL to leave room for more changes
in case the Bspec changes later and deviates from CNL sequence.
v2:
Use ~TAP3_DISABLE for enbaling that bit (Jani Nikula)
v3:
* Use dw4_scaling column for PORT_TX_DW4 values (Rodrigo)
v4:
* Call it combo_vswing, use switch statement (Paulo)
v5 (from Paulo):
* Fix a typo.
* s/rate < 600000/rate <= 600000/.
* Don't remove blank lines that should be there.
v6:
* Rebased by Rodrigo on top of Cannonlake changes
where non vswing sequences are not aligned with iboost
anymore.
v7: Another rebase after an upstream rework.
v8 (from Paulo):
* Adjust the code to the upstream output type changes.
* Squash the patch that moved some functions up.
* Merge both get_combo_buf_trans functions in order to simplify the
code.
* Change the changelog format.
v9 (from Paulo):
* Use RTERM_SELECT instead of SCALING_MODE_SEL.
* Adjust the output type handling according to how the other platforms
do it now.
v10 (from Paulo):
* Fix comment left out from v9 changes (Rodrigo).
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180328215803.13835-8-paulo.r.zanoni@intel.com
Allow specifying a syncobj on render job submission where we store the
fence for the job. This gives userland flexible access to the fence.
v2: Use 0 as invalid syncobj to drop flag (Eric)
Don't reintroduce the padding (Eric)
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1524607427-12876-3-git-send-email-stschake@gmail.com
Allow userland to specify a syncobj that is waited on before a render job
starts processing.
v2: Use 0 as invalid syncobj to drop flag (Eric)
Drop extra newline (Eric)
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1524607427-12876-2-git-send-email-stschake@gmail.com
It turns out that I had just mistaken what type of write the register
writes were supposed to be, using DCS instead of generic long writes.
Switching to transactions instead of using the atmel as a bridge also
seems to resolve the sparkling pixels problem I've had.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 2f733d6194 ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Link: https://patchwork.freedesktop.org/patch/msgid/20171031193258.17373-2-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Thierry Reding <treding@nvidia.com>
- Fixup license text for oradax driver, from Rob Gardner.
- Release device object with put_device() instead of straight kfree(),
from Arvind Yadav.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: vio: use put_device() instead of kfree()
sparc64: Fix mistake in oradax license text
Never directly free @dev after calling device_register(), even
if it returned an error. Always use put_device() to give up the
reference initialized.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The license text in both oradax files mistakenly specifies "version 3" of
the GNU General Public License. This is corrected to specify "version 2".
Signed-off-by: Rob Gardner <rob.gardner@oracle.com>
Signed-off-by: Jonathan Helman <jonathan.helman@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix drivers/md/dm-cache-background-tracker.c:169:16: warning: symbol
'alloc_work' was not declared. Should it be static?
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Commit b9f19259b8 ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl")
introduced a mechanism to mark some BOs as purgeable to allow the driver
to drop them under memory pressure. In order to implement this feature
we had to add a mechanism to mark BOs as currently used by a piece of
hardware which materialized through the ->usecnt counter.
Plane code is supposed to increment usecnt when it attaches a BO to a
plane and decrement it when it's done with this BO, which was done in
the ->prepare_fb() and ->cleanup_fb() hooks. The problem is, async page
flip logic does not go through the regular atomic update path, and
->prepare_fb() and ->cleanup_fb() are not called in this case.
Fix that by manually calling vc4_bo_{inc,dec}_usecnt() in the
async-page-flip path.
Note that all this should go away as soon as we get generic async page
flip support in the core, in the meantime, this fix should do the
trick.
Fixes: b9f19259b8 ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl")
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180430133232.32457-1-boris.brezillon@bootlin.com
Link: https://patchwork.freedesktop.org/patch/msgid/20180430133232.32457-1-boris.brezillon@bootlin.com
There can be up to eight optional device functional gate gate clocks for
each clkctrl instance in clkctrl register bits 8 to 15. Some of them are
only needed for module level reset while others may always be needed
during use. Let's add support for those and update the binding doc
accordingly.
Note that the optional clkctrl mux and divider clocks starting at bit 20
can be directly mapped to the child devices, and ti-sysc does not need to
manage those.
And as GPIOs need the optional clocks for reset, we can now add it with
SYSC_QUIRK_OPT_CLKS_IN_RESET.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
In order to prepare supporting clkctrl optional clocks, we need to
make the current child clock handling more generic so we can use the
clock role names for the optional clocks in the following patch.
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Otherwise child devices that some interconnect target module devices
have won't probe using simple-bus.
Signed-off-by: Tony Lindgren <tony@atomide.com>
We can initialize almost everything at normal module_init time with
ti-sysc except for clocks and timers. To prepare for that, let's make
display init into device_initcall as otherwise we'll be calling
of_platform_populate() before the parent has probed.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
There's no need to probe devices until at module_init time and we
currently have at least PM trying to use I2C for PMICs early on.
As only a part of the SoC init_early is SoC specific, we only need to call
the SoC specific PM init function. And we can modify omap2_common_pm_late_init()
so it becomes a late_initcall().
Note that this changes am335x to call omap2_clk_enable_autoidle_all() that
seems to be missing currently.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We still have some SDMA probing using omap_device_build() for the
arch/arm/plat-omap/dma.c part that the dmaengine driver then uses.
So we still need to ensure that omap_device_build() works even if we
probe and manage the dmaengine driver via ti-sysc. And we don't want
to call dev_pm_domain_set() as otherwise we'd also have omap_device
try to manage the hardware in addition to ti-sysc.
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
We currently don't know if a revision register exists or not. Zero is
often a valid offset for the revision register. As we are still checking
device tree data against platform data, we will get bogus warnings with
correct device tree data because of incomplete platform data.
Let's fix the issue by using signed offsets and tag the revision registers
that don't exist with -ENODEV, and init the missing ones with the correct
revision register offset.
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
If a system timer is configured with an interrconnect target module in
the dts, the ti,hwmods and module fck are at the interconnect target
level. Then there's a separate fck for the timer child device.
If the child device has a separate functional clock, we need to configure
it directly. For example, timer clk clkctrl clock bit 0 is the module
clock for the interconnect target, and bit 24 being the functional clock
for the timer IP.
For system timers, we already mark them as disabled. Now must also mark
the interconnect target module as disabled to prevent ti-sysc to manage
it instead of the system timer.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Sparse complains with following warning:
drivers/gpu/drm/vc4/vc4_v3d.c:222:1: warning: symbol
'vc4_allocate_bin_bo' was not declared. Should it be static?
Make vc4_allocate_bin static as it is not used outside of
vc4_v3d.c.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425070953.17933-1-vthakkar1994@gmail.com
Currently, the kernel protects access to the agent ID allocator on a per
port basis using a spinlock, so it is impossible for two apps/threads on
the same port to get the same TID, but it is entirely possible for two
threads on different ports to end up with the same TID.
As this can be confusing (regardless of it being legal according to the
IB Spec 1.3, C13-18.1.1, in section 13.4.6.4 - TransactionID usage),
and as the rdma-core user space API for /dev/umad devices implies unique
TIDs even across ports, make the TID an atomic type so that no two
allocations, regardless of port number, will be the same.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The usb_request pointer could be NULL in musb_g_tx(), where the
tracepoint call would trigger the NULL pointer dereference failure when
parsing the members of the usb_request pointer.
Move the tracepoint call to where the usb_request pointer is already
checked to solve the issue.
Fixes: fc78003e53 ("usb: musb: gadget: add usb-request tracepoints")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
musb_start_urb() doesn't check the pass-in parameter if it is NULL. But
in musb_bulk_nak_timeout() the parameter passed to musb_start_urb() is
returned from first_qh(), which could be NULL.
So wrap the musb_start_urb() call here with a if condition check to
avoid the potential NULL pointer dereference.
Fixes: f283862f3b ("usb: musb: NAK timeout scheme on bulk TX endpoint")
Cc: stable@vger.kernel.org # v3.7+
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ido Schimmel says:
====================
mlxsw: SPAN: Support routes pointing at bridges
Petr says:
When mirroring to a gretap or ip6gretap netdevice, the route that
directs the encapsulated packets can reference a bridge. In that case,
in the software model, the packet is switched.
Thus when offloading mirroring like that, take into consideration FDB,
STP, PVID configured at the bridge, and whether that VLAN ID should be
tagged on egress.
Patch #1 introduces functions to get bridge PVID, VLAN flags and to look
up an FDB entry.
Patches #2 and #3 refactor some existing code and introduce a new
accessor function.
With patches #4 and #5 mlxsw calls mlxsw_sp_span_respin() on switchdev
events as well. There is no impact yet, because bridge as an underlay
device is still not allowed.
That is implemented in patch #6, which uses the new interfaces to figure
out on which one port the mirroring should be configured, and whether
the mirrored packets should be VLAN-tagged and how.
Changes from v2 to v3:
- Rename the suite of bridge accessor function to br_vlan_get_pvid(),
br_vlan_get_info() and br_fdb_find_port(). The _get bit is to avoid
clashing with an existing static function.
Changes from v1 to v2:
- Change the suite of bridge accessor functions to br_vlan_pvid_rtnl(),
br_vlan_info_rtnl(), br_fdb_find_port_rtnl().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When handling mirroring to a gretap or ip6gretap netdevice in mlxsw, the
underlay address (i.e. the remote address of the tunnel) may be routed
to a bridge.
In that case, look up the resolved neighbor Ethernet address in that
bridge's FDB. Then configure the offload to direct the mirrored traffic
to that port, possibly with tagging.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changes to switchdev artifact can make a SPAN entry offloadable or
unoffloadable. To that end:
- Listen to SWITCHDEV_FDB_*_TO_BRIDGE notifications in addition to
the *_TO_DEVICE ones, to catch whatever activity is sent to the
bridge (likely by mlxsw itself).
On each FDB notification, respin SPAN to reconcile it with the FDB
changes.
- Also respin on switchdev port attribute changes (which currently
covers changes to STP state of ports) and port object additions and
removals.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since switchdev events can trigger SPAN respin, it is necessary that the
data structures are available. Register SPAN first, with a commentary on
what the dependencies are.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Publish the existing function mlxsw_sp_bridge_port_find(), and add
another service accessor mlxsw_sp_bridge_port_stp_state(). Publish both
in a new file spectrum_switchdev.h.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of duplicating the decision regarding port forwarding state made
by mlxsw_sp_port_vid_stp_set(), extract the decision-making into a new
function and reuse.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a couple new functions to allow querying FDB and vlan settings of a
bridge.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix warnings regarding restricted __be32 type usage by strictly
specifying the type of the ipv4 address being printed in the dev_err
statement.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The expectation of the ops VIRTCHNL_OP_ENABLE_QUEUES and
VIRTCHNL_OP_DISABLE_QUEUES is that the queue map sent by
the VF is taken into account when enabling/disabling
queues in the VF VSI. This patch makes sure that happens.
By breaking out the individual queue set up functions so
that they can be called directly from the i40e_virtchnl_pf.c
file, only the queues as specified by the queue bit map that
accompanies the enable/disable queues ops will be handled.
Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When operating at 1GbE, the base incval for the PTP clock is so large
that multiplying it by numbers close to the max_adj can overflow the
u64.
Rather than attempting to limit the max_adj to a value small enough to
avoid overflow, instead calculate the incvalue adjustment based on the
40GbE incvalue, and then multiply that by the scaling factor for the
link speed.
This sacrifices a small amount of precision in the adjustment but we
avoid erratic behavior of the clock due to the overflow caused if ppb is
very near the maximum adjustment.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This fixes at least 2 issues I have found with the UDP tunnel filter
configuration.
The first issue is the fact that the tunnels didn't have any sort of mutual
exclusion in place to prevent an update from racing with a user request to
add/remove a port. As such you could request to add and remove a port
before the port update code had a chance to respond which would result in a
very confusing result. To address it I have added 2 changes. First I added
the RTNL mutex wrapper around our updating of the pending, port, and
filter_index bits. Second I added logic so that we cannot use a port that
has a pending deletion since we need to free the space in hardware before
we can allow software to reuse it.
The second issue addressed is the fact that we were not recording the
actual filter index provided to us by the admin queue. As a result we were
deleting filters that were not associated with the actual filter we wanted
to delete. To fix that I added a filter_index member to the UDP port
tracking structure.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch fixes the problem where each MTU change turns TSO,
GSO and GRO on from off state.
Now when TSO, GSO or GRO is turned off, MTU change does not
turn them on.
Signed-off-by: Paweł Jabłoński <pawel.jablonski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The advertising 10G LR mode should be possible to set
but in the function i40e_set_link_ksettings() check for this
is missed. This patch adds check for 10000baseLR_Full
flag for 10G modes.
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The seg6_make_flowlabel() is used by seg6_do_srh_encap() to compute the
flowlabel from a given skb. It relies on skb_get_hash() which eventually
calls __skb_flow_dissect() to extract the flow_keys struct values from
the skb.
In case of IPv4 traffic, calling seg6_make_flowlabel() after skb_push(),
skb_reset_network_header(), and skb_mac_header_rebuild() will results in
flow_keys struct of all key values set to zero.
This patch calls seg6_make_flowlabel() before resetting the headers of skb
to get the right key values.
Extracted Key values are based on the type inner packet as follows:
1) IPv6 traffic: src_IP, dst_IP, L4 proto, and flowlabel of inner packet.
2) IPv4 traffic: src_IP, dst_IP, L4 proto, src_port, and dst_port
3) L2 traffic: depends on what kind of traffic carried into the L2
frame. IPv6 and IPv4 traffic works as discussed 1) and 2)
Here a hex_dump of struct flow_keys for IPv4 and IPv6 traffic
10.100.1.100: 47302 > 30.0.0.2: 5001
00000000: 14 00 02 00 00 00 00 00 08 00 11 00 00 00 00 00
00000010: 00 00 00 00 00 00 00 00 13 89 b8 c6 1e 00 00 02
00000020: 0a 64 01 64
fc00:a1:a > b2::2
00000000: 28 00 03 00 00 00 00 00 86 dd 11 00 99 f9 02 00
00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 b2 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 02 fc 00 00 a1
00000030: 00 00 00 00 00 00 00 00 00 00 00 0a
Signed-off-by: Ahmed Abdelsalam <amsalam20@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previous method for reading LLDP config was based on hard-coded
offsets. It happened to work, because of structured architecture of
the NVM memory. In the new approach, known as FLAT, we need to
calculate the absolute address, instead of using relative values.
Needed defines for memory location were added.
Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
