[ Upstream commit 333e22db22 ]
When tsi-as-adc is configured it is possible for in7[0123]_input read to
return an incorrect value if a concurrent read to in[456]_input is
performed. This is caused by a concurrent manipulation of the mux
channel without proper locking as hwmon and mfd use different locks for
synchronization.
Switch hwmon to use the same lock as mfd when accessing the TSI channel.
Fixes: 4f16cab19a ("hwmon: da9052: Add support for TSI channel")
Signed-off-by: Samu Nuutamo <samu.nuutamo@vincit.fi>
[rebase to current master, reword commit message slightly]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f7c9caf01 ]
Replace negations of nft_rbtree_interval_end() with a new helper,
nft_rbtree_interval_start(), wherever this helps to visualise the
problem at hand, that is, for all the occurrences except for the
comparison against given flags in __nft_rbtree_get().
This gets especially useful in the next patch.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d51c214541 ]
The second argument is the end "pointer", not the length.
Fixes: d28f6df130 ("arm64/kexec: Add core kexec support")
Cc: <stable@vger.kernel.org> # 4.8.x-
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c407aca64 ]
gcc-10 warns around a suspicious access to an empty struct member:
net/netfilter/nf_conntrack_core.c: In function '__nf_conntrack_alloc':
net/netfilter/nf_conntrack_core.c:1522:9: warning: array subscript 0 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[0]'} [-Wzero-length-bounds]
1522 | memset(&ct->__nfct_init_offset[0], 0,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from net/netfilter/nf_conntrack_core.c:37:
include/net/netfilter/nf_conntrack.h:90:5: note: while referencing '__nfct_init_offset'
90 | u8 __nfct_init_offset[0];
| ^~~~~~~~~~~~~~~~~~
The code is correct but a bit unusual. Rework it slightly in a way that
does not trigger the warning, using an empty struct instead of an empty
array. There are probably more elegant ways to do this, but this is the
smallest change.
Fixes: c41884ce05 ("netfilter: conntrack: avoid zeroing timer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50eaa652b5 ]
Commit 402cb8dda9 ("fscache: Attach the index key and aux data to
the cookie") added the aux_data and aux_data_len to parameters to
fscache_acquire_cookie(), and updated the callers in the NFS client.
In the process it modified the aux_data to include the change_attr,
but missed adding change_attr to a couple places where aux_data was
used. Specifically, when opening a file and the change_attr is not
added, the following attempt to lookup an object will fail inside
cachefiles_check_object_xattr() = -116 due to
nfs_fscache_inode_check_aux() failing memcmp on auxdata and returning
FSCACHE_CHECKAUX_OBSOLETE.
Fix this by adding nfs_fscache_update_auxdata() to set the auxdata
from all relevant fields in the inode, including the change_attr.
Fixes: 402cb8dda9 ("fscache: Attach the index key and aux data to the cookie")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e31ded689 ]
nfs currently behaves differently on 32-bit and 64-bit kernels regarding
the on-disk format of nfs_fscache_inode_auxdata.
That format should really be the same on any kernel, and we should avoid
the 'timespec' type in order to remove that from the kernel later on.
Using plain 'timespec64' would not be good here, since that includes
implied padding and would possibly leak kernel stack data to the on-disk
format on 32-bit architectures.
struct __kernel_timespec would work as a replacement, but open-coding
the two struct members in nfs_fscache_inode_auxdata makes it more
obvious what's going on here, and keeps the current format for 64-bit
architectures.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9bfced1fb ]
Commit 402cb8dda9 ("fscache: Attach the index key and aux data to
the cookie") added the index_key and index_key_len parameters to
fscache_acquire_cookie(), and updated the callers in the NFS client.
One of the callers was inside nfs_fscache_get_super_cookie()
and was changed to use the full struct nfs_fscache_key as the
index_key. However, a couple members of this structure contain
pointers and thus will change each time the same NFS share is
remounted. Since index_key is used for fscache_cookie->key_hash
and this subsequently is used to compare cookies, the effectiveness
of fscache with NFS is reduced to the point at which a umount
occurs. Any subsequent remount of the same share will cause a
unique NFS super_block index_key and key_hash to be generated for
the same data, rendering any prior fscache data unable to be
found. A simple reproducer demonstrates the problem.
1. Mount share with 'fsc', create a file, drop page cache
systemctl start cachefilesd
mount -o vers=3,fsc 127.0.0.1:/export /mnt
dd if=/dev/zero of=/mnt/file1.bin bs=4096 count=1
echo 3 > /proc/sys/vm/drop_caches
2. Read file into page cache and fscache, then unmount
dd if=/mnt/file1.bin of=/dev/null bs=4096 count=1
umount /mnt
3. Remount and re-read which should come from fscache
mount -o vers=3,fsc 127.0.0.1:/export /mnt
echo 3 > /proc/sys/vm/drop_caches
dd if=/mnt/file1.bin of=/dev/null bs=4096 count=1
4. Check for READ ops in mountstats - there should be none
grep READ: /proc/self/mountstats
Looking at the history and the removed function, nfs_super_get_key(),
we should only use nfs_fscache_key.key plus any uniquifier, for
the fscache index_key.
Fixes: 402cb8dda9 ("fscache: Attach the index key and aux data to the cookie")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c077dc5e06 ]
First, it should be noted that the CQE timeout (60 seconds) is substantial
so a CQE request that times out is really stuck, and the race between
timeout and completion is extremely unlikely. Nevertheless this patch
fixes an issue with it.
Commit ad73d6fead ("mmc: complete requests from ->timeout")
preserved the existing functionality, to complete the request.
However that had only been necessary because the block layer
timeout handler had been marking the request to prevent it from being
completed normally. That restriction was removed at the same time, the
result being that a request that has gone will have been completed anyway.
That is, the completion was unnecessary.
At the time, the unnecessary completion was harmless because the block
layer would ignore it, although that changed in kernel v5.0.
Note for stable, this patch will not apply cleanly without patch "mmc:
core: Fix recursive locking issue in CQE recovery path"
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: ad73d6fead ("mmc: complete requests from ->timeout")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200508062227.23144-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6bfb1bf00 ]
In the request completion path with CQE, request type is being checked
after the request is getting completed. This is resulting in returning
the wrong request type and leading to the IO hang issue.
ASYNC request type is getting returned for DCMD type requests.
Because of this mismatch, mq->cqe_busy flag is never getting cleared
and the driver is not invoking blk_mq_hw_run_queue. So requests are not
getting dispatched to the LLD from the block layer.
All these eventually leading to IO hang issues.
So, get the request type before completing the request.
Cc: <stable@vger.kernel.org>
Fixes: 1e8e55b670 ("mmc: block: Add CQE support")
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1588775643-18037-2-git-send-email-vbadigan@codeaurora.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37e31d2d26 ]
The i40iw_arp_table() function can return -EOVERFLOW if
i40iw_alloc_resource() fails so we can't just test for "== -1".
Fixes: 4e9042e647 ("i40iw: add hw and utils files")
Link: https://lore.kernel.org/r/20200422092211.GA195357@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69388e15f5 ]
According to Braswell NDA Specification Update (#557593),
concurrent read accesses may result in returning 0xffffffff and write
instructions may be dropped. We have an established format for the
commit references, i.e.
cdca06e4e8 ("pinctrl: baytrail: Add missing spinlock usage in
byt_gpio_irq_handler")
Fixes: 0bd50d719b ("pinctrl: cherryview: prevent concurrent access to GPIO controllers")
Signed-off-by: Grace Kao <grace.kao@intel.com>
Reported-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccd025eadd ]
It appears that pin configuration for GPIO chip hasn't been enabled yet
due to absence of ->set_config() callback.
Enable it here for Intel Baytrail.
Fixes: c501d0b149 ("pinctrl: baytrail: Add pin control operations")
Depends-on: 2956b5d94a ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 566a2ab3c9 ]
Make sure we don't walk past the end of the metadata in gfs2_walk_metadata: the
inode holds fewer pointers than indirect blocks.
Slightly clean up gfs2_iomap_get.
Fixes: a27a0c9b6a ("gfs2: gfs2_walk_metadata fix")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52e4e36807 ]
Commit 317d931392 ("ALSA: hda/realtek - Set default power save node to
0") makes the ALC225 have pop noise on S3 resume and cold boot.
The previous fix enable power save node universally for ALC225, however
it makes some ALC225 systems unable to produce any sound.
So let's only enable power save node for the affected Dell Wyse
platform.
Fixes: 317d931392 ("ALSA: hda/realtek - Set default power save node to 0")
BugLink: https://bugs.launchpad.net/bugs/1866357
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200503152449.22761-2-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca76282b6f ]
A race exists between build_pcms() and build_controls() phases of codec
setup. Build_pcms() sets up notifier for jack events. If a monitor event
is received before build_controls() is run, the initial jack state is
lost and never reported via mixer controls.
The problem can be hit at least with SOF as the controller driver. SOF
calls snd_hda_codec_build_controls() in its workqueue-based probe and
this can be delayed enough to hit the race condition.
Fix the issue by invalidating the per-pin ELD information when
build_controls() is called. The existing call to hdmi_present_sense()
will update the ELD contents. This ensures initial monitor state is
correctly reflected via mixer controls.
BugLink: https://github.com/thesofproject/linux/issues/1687
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200428123836.24512-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c539776ac ]
Make a note of the first time we discover the turbo mode has been
disabled by the BIOS, as otherwise we complain every time we try to
update the mode.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c89446379 ]
When a channel configuration fails, the status of the channel is set to
DEV_ERROR so that an attempt to submit it fails. However, this status
sticks until the heat end of the universe, making it impossible to
recover from the error.
Let's reset it when the channel is released so that further use of the
channel with correct configuration is not impacted.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200419164912.670973-5-lkundrak@v3.sk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e45676a4d ]
pd->dma.dev is read in irq handler pd_irq().
However, it is set to pdev->dev after request_irq().
Therefore, set pd->dma.dev to pdev->dev before request_irq() to
avoid data race between pch_dma_probe() and pd_irq().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lore.kernel.org/r/20200416062335.29223-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c1918c8f5 ]
When building with the LLVM linker this error occurrs:
LD arch/riscv/kernel/vdso/vdso-syms.o
ld.lld: error: no input files
This happens because the lld treats -R as an alias to -rpath, as opposed
to ld where -R means --just-symbols.
Use the long option name for compatibility between the two.
Link: https://github.com/ClangBuiltLinux/linux/issues/805
Reported-by: Dmitry Golovin <dima@golovin.in>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24adbc1676 ]
We autotune rcvbuf whenever SO_RCVLOWAT is set to account for 100%
overhead in tcp_set_rcvlowat()
This works well when skb->len/skb->truesize ratio is bigger than 0.5
But if we receive packets with small MSS, we can end up in a situation
where not enough bytes are available in the receive queue to satisfy
RCVLOWAT setting.
As our sk_rcvbuf limit is hit, we send zero windows in ACK packets,
preventing remote peer from sending more data.
Even autotuning does not help, because it only triggers at the time
user process drains the queue. If no EPOLLIN is generated, this
can not happen.
Note poll() has a similar issue, after commit
c7004482e8 ("tcp: Respect SO_RCVLOWAT in tcp_poll().")
Fixes: 03f45c883c ("tcp: avoid extra wakeups for SO_RCVLOWAT users")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cc4de047b3 ]
The stated intent of the original commit is to is to "return the timestamp
corresponding to the highest sequence number data returned." The current
implementation returns the timestamp for the last byte of the last fully
read skb, which is not necessarily the last byte in the recv buffer. This
patch converts behavior to the original definition, and to the behavior of
the previous draft versions of commit 98aaa913b4 ("tcp: Extend
SOF_TIMESTAMPING_RX_SOFTWARE to TCP recvmsg") which also match this
behavior.
Fixes: 98aaa913b4 ("tcp: Extend SOF_TIMESTAMPING_RX_SOFTWARE to TCP recvmsg")
Co-developed-by: Iris Liu <iris@onechronos.com>
Signed-off-by: Iris Liu <iris@onechronos.com>
Signed-off-by: Kelly Littlepage <kelly@onechronos.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 090e28b229 ]
If systemd is configured to use hybrid mode which enables the use of
both cgroup v1 and v2, systemd will create new cgroup on both the default
root (v2) and netprio_cgroup hierarchy (v1) for a new session and attach
task to the two cgroups. If the task does some network thing then the v2
cgroup can never be freed after the session exited.
One of our machines ran into OOM due to this memory leak.
In the scenario described above when sk_alloc() is called
cgroup_sk_alloc() thought it's in v2 mode, so it stores
the cgroup pointer in sk->sk_cgrp_data and increments
the cgroup refcnt, but then sock_update_netprioidx()
thought it's in v1 mode, so it stores netprioidx value
in sk->sk_cgrp_data, so the cgroup refcnt will never be freed.
Currently we do the mode switch when someone writes to the ifpriomap
cgroup control file. The easiest fix is to also do the switch when
a task is attached to a new cgroup.
Fixes: bd1060a1d6 ("sock, cgroup: add sock->sk_cgroup")
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Tested-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 57644431a6 ]
In commit b406472b5a ("net: ipv4: avoid mixed n_redirects and
rate_tokens usage") I missed the fact that a 0 'rate_tokens' will
bypass the backoff algorithm.
Since rate_tokens is cleared after a redirect silence, and never
incremented on redirects, if the host keeps receiving packets
requiring redirect it will reply ignoring the backoff.
Additionally, the 'rate_last' field will be updated with the
cadence of the ingress packet requiring redirect. If that rate is
high enough, that will prevent the host from generating any
other kind of ICMP messages
The check for a zero 'rate_tokens' value was likely a shortcut
to avoid the more complex backoff algorithm after a redirect
silence period. Address the issue checking for 'n_redirects'
instead, which is incremented on successful redirect, and
does not interfere with other ICMP replies.
Fixes: b406472b5a ("net: ipv4: avoid mixed n_redirects and rate_tokens usage")
Reported-and-tested-by: Colin Walters <walters@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3047211ca1 ]
There is a soft dependency against dsa_loop_bdinfo.ko which sets up the
MDIO device registration, since there are no symbols referenced by
dsa_loop.ko, there is no automatic loading of dsa_loop_bdinfo.ko which
is needed.
Fixes: 98cd1552ea ("net: dsa: Mock-up driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e8a1b0efd6 ]
if some function in ndo_stop interface returns failure because of
hardware fault, must go on excuting rest steps rather than return
failure directly, otherwise will cause memory leak.And bump the
timeout for SET_FUNC_STATE to ensure that cmd won't return failure
when hw is busy. Otherwise hw may stomp host memory if we free
memory regardless of the return value of SET_FUNC_STATE.
Fixes: 51ba902a16 ("net-next/hinic: Initialize hw interface")
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 01c3259818 ]
When we fill up a receive VQ, try_fill_recv currently tries to count
kicks using a 64 bit stats counter. Turns out, on a 32 bit kernel that
uses a seqcount. sequence counts are "lock" constructs where you need to
make sure that writers are serialized.
In turn, this means that we mustn't run two try_fill_recv concurrently.
Which of course we don't. We do run try_fill_recv sometimes from a
softirq napi context, and sometimes from a fully preemptible context,
but the later always runs with napi disabled.
However, when it comes to the seqcount, lockdep is trying to enforce the
rule that the same lock isn't accessed from preemptible and softirq
context - it doesn't know about napi being enabled/disabled. This causes
a false-positive warning:
WARNING: inconsistent lock state
...
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
As a work around, shut down the warning by switching
to u64_stats_update_begin_irqsave - that works by disabling
interrupts on 32 bit only, is a NOP on 64 bit.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 09454fd0a4 ]
This reverts commit 19bda36c42:
| ipv6: add mtu lock check in __ip6_rt_update_pmtu
|
| Prior to this patch, ipv6 didn't do mtu lock check in ip6_update_pmtu.
| It leaded to that mtu lock doesn't really work when receiving the pkt
| of ICMPV6_PKT_TOOBIG.
|
| This patch is to add mtu lock check in __ip6_rt_update_pmtu just as ipv4
| did in __ip_rt_update_pmtu.
The above reasoning is incorrect. IPv6 *requires* icmp based pmtu to work.
There's already a comment to this effect elsewhere in the kernel:
$ git grep -p -B1 -A3 'RTAX_MTU lock'
net/ipv6/route.c=4813=
static int rt6_mtu_change_route(struct fib6_info *f6i, void *p_arg)
...
/* In IPv6 pmtu discovery is not optional,
so that RTAX_MTU lock cannot disable it.
We still use this lock to block changes
caused by addrconf/ndisc.
*/
This reverts to the pre-4.9 behaviour.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Fixes: 19bda36c42 ("ipv6: add mtu lock check in __ip6_rt_update_pmtu")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b8c1583951 ]
We don't want to disconnect a session because of a stray PADT arriving
while the interface is in promiscuous mode.
Furthermore, multicast and broadcast packets make no sense here, so
only PACKET_HOST is accepted.
Reported-by: David Balažic <xerces9@gmail.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9de5d235b6 ]
phy_restart_aneg() enables aneg in the PHY. That's not what we want
if phydev->autoneg is disabled. In this case still update EEE
advertisement register, but don't enable aneg and don't trigger an
aneg restart.
Fixes: f75abeb833 ("net: phy: restart phy autonegotiation after EEE advertisment change")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eead1c2ea2 ]
The cipso and calipso code can set the MLS_CAT attribute on
successful parsing, even if the corresponding catmap has
not been allocated, as per current configuration and external
input.
Later, selinux code tries to access the catmap if the MLS_CAT flag
is present via netlbl_catmap_getlong(). That may cause null ptr
dereference while processing incoming network traffic.
Address the issue setting the MLS_CAT flag only if the catmap is
really allocated. Additionally let netlbl_catmap_getlong() cope
with NULL catmap.
Reported-by: Matthew Sheets <matthew.sheets@gd-ms.com>
Fixes: 4b8feff251 ("netlabel: fix the horribly broken catmap functions")
Fixes: ceba1832b1 ("calipso: Set the calipso socket label to match the secattr.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dd912306ff ]
syzbot managed to trigger a recursive NETDEV_FEAT_CHANGE event
between bonding master and slave. I managed to find a reproducer
for this:
ip li set bond0 up
ifenslave bond0 eth0
brctl addbr br0
ethtool -K eth0 lro off
brctl addif br0 bond0
ip li set br0 up
When a NETDEV_FEAT_CHANGE event is triggered on a bonding slave,
it captures this and calls bond_compute_features() to fixup its
master's and other slaves' features. However, when syncing with
its lower devices by netdev_sync_lower_features() this event is
triggered again on slaves when the LRO feature fails to change,
so it goes back and forth recursively until the kernel stack is
exhausted.
Commit 17b85d29e8 intentionally lets __netdev_update_features()
return -1 for such a failure case, so we have to just rely on
the existing check inside netdev_sync_lower_features() and skip
NETDEV_FEAT_CHANGE event only for this specific failure case.
Fixes: fd867d51f8 ("net/core: generic support for disabling netdev features down stack")
Reported-by: syzbot+e73ceacfd8560cc8a3ca@syzkaller.appspotmail.com
Reported-by: syzbot+c2fb6f9ddcea95ba49b5@syzkaller.appspotmail.com
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jann Horn <jannh@google.com>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83c6f23900 upstream.
If the __copy_from_user function failed we need to call sg_remove_request
in sg_write.
Link: https://lore.kernel.org/r/610618d9-e983-fd56-ed0f-639428343af7@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[groeck: Backport to v5.4.y and older kernels]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 90b5feb8c4 ]
A userspace process holding a file descriptor to a virtio_blk device can
still invoke block_device_operations after hot unplug. This leads to a
use-after-free accessing vblk->vdev in virtblk_getgeo() when
ioctl(HDIO_GETGEO) is invoked:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000090
IP: [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio]
PGD 800000003a92f067 PUD 3a930067 PMD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 1310 Comm: hdio-getgeo Tainted: G OE ------------ 3.10.0-1062.el7.x86_64 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
task: ffff9be5fbfb8000 ti: ffff9be5fa890000 task.ti: ffff9be5fa890000
RIP: 0010:[<ffffffffc00e5450>] [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio]
RSP: 0018:ffff9be5fa893dc8 EFLAGS: 00010246
RAX: ffff9be5fc3f3400 RBX: ffff9be5fa893e30 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff9be5fbc10b40
RBP: ffff9be5fa893dc8 R08: 0000000000000301 R09: 0000000000000301
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9be5fdc24680
R13: ffff9be5fbc10b40 R14: ffff9be5fbc10480 R15: 0000000000000000
FS: 00007f1bfb968740(0000) GS:ffff9be5ffc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000090 CR3: 000000003a894000 CR4: 0000000000360ff0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
[<ffffffffc016ac37>] virtblk_getgeo+0x47/0x110 [virtio_blk]
[<ffffffff8d3f200d>] ? handle_mm_fault+0x39d/0x9b0
[<ffffffff8d561265>] blkdev_ioctl+0x1f5/0xa20
[<ffffffff8d488771>] block_ioctl+0x41/0x50
[<ffffffff8d45d9e0>] do_vfs_ioctl+0x3a0/0x5a0
[<ffffffff8d45dc81>] SyS_ioctl+0xa1/0xc0
A related problem is that virtblk_remove() leaks the vd_index_ida index
when something still holds a reference to vblk->disk during hot unplug.
This causes virtio-blk device names to be lost (vda, vdb, etc).
Fix these issues by protecting vblk->vdev with a mutex and reference
counting vblk so the vd_index_ida index can be removed in all cases.
Fixes: 48e4043d45 ("virtio: add virtio disk geometry feature")
Reported-by: Lance Digby <ldigby@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200430140442.171016-1-stefanha@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc30b4059f ]
The current gcc-10 snapshot produces a false-positive warning:
net/core/drop_monitor.c: In function 'trace_drop_common.constprop':
cc1: error: writing 8 bytes into a region of size 0 [-Werror=stringop-overflow=]
In file included from net/core/drop_monitor.c:23:
include/uapi/linux/net_dropmon.h:36:8: note: at offset 0 to object 'entries' with size 4 declared here
36 | __u32 entries;
| ^~~~~~~
I reported this in the gcc bugzilla, but in case it does not get
fixed in the release, work around it by using a temporary variable.
Fixes: 9a8afc8d39 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94881
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee8d2267f0 ]
Should an irq requested with 'devm_request_irq' be released explicitly,
it should be done by 'devm_free_irq()', not 'free_irq()'.
Fixes: 6c821bd9ed ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10e3cc180e ]
A call to 'dma_alloc_coherent()' is hidden in 'sonic_alloc_descriptors()',
called from 'sonic_probe1()'.
This is correctly freed in the remove function, but not in the error
handling path of the probe function.
Fix it and add the missing 'dma_free_coherent()' call.
While at it, rename a label in order to be slightly more informative.
Fixes: efcce83936 ("[PATCH] macsonic/jazzsonic network drivers update")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea0dfeb420 ]
Recent commit 71725ed10c ("mm: huge tmpfs: try to split_huge_page()
when punching hole") has allowed syzkaller to probe deeper, uncovering a
long-standing lockdep issue between the irq-unsafe shmlock_user_lock,
the irq-safe xa_lock on mapping->i_pages, and shmem inode's info->lock
which nests inside xa_lock (or tree_lock) since 4.8's shmem_uncharge().
user_shm_lock(), servicing SysV shmctl(SHM_LOCK), wants
shmlock_user_lock while its caller shmem_lock() holds info->lock with
interrupts disabled; but hugetlbfs_file_setup() calls user_shm_lock()
with interrupts enabled, and might be interrupted by a writeback endio
wanting xa_lock on i_pages.
This may not risk an actual deadlock, since shmem inodes do not take
part in writeback accounting, but there are several easy ways to avoid
it.
Requiring interrupts disabled for shmlock_user_lock would be easy, but
it's a high-level global lock for which that seems inappropriate.
Instead, recall that the use of info->lock to guard info->flags in
shmem_lock() dates from pre-3.1 days, when races with SHMEM_PAGEIN and
SHMEM_TRUNCATE could occur: nowadays it serves no purpose, the only flag
added or removed is VM_LOCKED itself, and calls to shmem_lock() an inode
are already serialized by the caller.
Take info->lock out of the chain and the possibility of deadlock or
lockdep warning goes away.
Fixes: 4595ef88d1 ("shmem: make shmem_inode_info::lock irq-safe")
Reported-by: syzbot+c8a8197c8852f566b9d9@syzkaller.appspotmail.com
Reported-by: syzbot+40b71e145e73f78f81ad@syzkaller.appspotmail.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2004161707410.16322@eggly.anvils
Link: https://lore.kernel.org/lkml/000000000000e5838c05a3152f53@google.com/
Link: https://lore.kernel.org/lkml/0000000000003712b305a331d3b1@google.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 86f8b1c01a upstream.
Prior to 1d27732f41 ("net: dsa: setup and teardown ports"), we would
not treat failures to set-up an user port as fatal, but after this
commit we would, which is a regression for some systems where interfaces
may be declared in the Device Tree, but the underlying hardware may not
be present (pluggable daughter cards for instance).
Fixes: 1d27732f41 ("net: dsa: setup and teardown ports")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e08df079b2 upstream.
If the trapping instruction contains a ':', for a memory access through
segment registers for example, the sed substitution will insert the '*'
marker in the middle of the instruction instead of the line address:
2b: 65 48 0f c7 0f cmpxchg16b %gs:*(%rdi) <-- trapping instruction
I started to think I had forgotten some quirk of the assembly syntax
before noticing that it was actually coming from the script. Fix it to
add the address marker at the right place for these instructions:
28: 49 8b 06 mov (%r14),%rax
2b:* 65 48 0f c7 0f cmpxchg16b %gs:(%rdi) <-- trapping instruction
30: 0f 94 c0 sete %al
Fixes: 18ff44b189 ("scripts/decodecode: make faulting insn ptr more robust")
Signed-off-by: Ivan Delalande <colona@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20200419223653.GA31248@visor
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8dd25a461 upstream.
When the current frame address (CFA) is stored on the stack (i.e.,
cfa->base == CFI_SP_INDIRECT), objtool neglects to adjust the stack
offset when there are subsequent pushes or pops. This results in bad
ORC data at the end of the ENTER_IRQ_STACK macro, when it puts the
previous stack pointer on the stack and does a subsequent push.
This fixes the following unwinder warning:
WARNING: can't dereference registers at 00000000f0a6bdba for ip interrupt_entry+0x9f/0xa0
Fixes: 627fce1480 ("objtool: Add ORC unwind table generation")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Reported-by: Dave Jones <dsj@fb.com>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Joe Mario <jmario@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/853d5d691b29e250333332f09b8e27410b2d9924.1587808742.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c165d57b55 upstream.
gcc-10 points out that a code path exists where a pointer to a stack
variable may be passed back to the caller:
net/netfilter/nfnetlink_osf.c: In function 'nf_osf_hdr_ctx_init':
cc1: warning: function may return address of local variable [-Wreturn-local-addr]
net/netfilter/nfnetlink_osf.c:171:16: note: declared here
171 | struct tcphdr _tcph;
| ^~~~~
I am not sure whether this can happen in practice, but moving the
variable declaration into the callers avoids the problem.
Fixes: 31a9c29210 ("netfilter: nf_osf: add struct nf_osf_hdr_ctx")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea64d8d6c6 upstream.
If the UDP header of a local VXLAN endpoint is NAT-ed, and the VXLAN
device has disabled UDP checksums and enabled Tx checksum offloading,
then the skb passed to udp_manip_pkt() has hdr->check == 0 (outer
checksum disabled) and skb->ip_summed == CHECKSUM_PARTIAL (inner packet
checksum offloaded).
Because of the ->ip_summed value, udp_manip_pkt() tries to update the
outer checksum with the new address and port, leading to an invalid
checksum sent on the wire, as the original null checksum obviously
didn't take the old address and port into account.
So, we can't take ->ip_summed into account in udp_manip_pkt(), as it
might not refer to the checksum we're acting on. Instead, we can base
the decision to update the UDP checksum entirely on the value of
hdr->check, because it's null if and only if checksum is disabled:
* A fully computed checksum can't be 0, since a 0 checksum is
represented by the CSUM_MANGLED_0 value instead.
* A partial checksum can't be 0, since the pseudo-header always adds
at least one non-zero value (the UDP protocol type 0x11) and adding
more values to the sum can't make it wrap to 0 as the carry is then
added to the wrapped number.
* A disabled checksum uses the special value 0.
The problem seems to be there from day one, although it was probably
not visible before UDP tunnels were implemented.
Fixes: 5b1158e909 ("[NETFILTER]: Add NAT support for nf_conntrack")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
