Here are 3 xhci driver fixes for reported issues for 4.3-rc7
All have been in linux-next for a while with no problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlYqpLcACgkQMUfUDdst+ylc+QCeKeLrR9st7HlULaq1Nxn5HMUE
nFwAn1rb/bF3IjtsJvY4a6owwIIiqzLD
=Vg7+
-----END PGP SIGNATURE-----
Merge tag 'usb-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are three xhci driver fixes for reported issues for 4.3-rc7
All have been in linux-next for a while with no problems"
* tag 'usb-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Add spurious wakeup quirk for LynxPoint-LP controllers
xhci: handle no ping response error properly
xhci: don't finish a TD if we get a short transfer event mid TD
Here are two fixes that resolve reported issues, one with the 8250
driver, and the other with the generic fbcon driver.
Both have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlYqpWsACgkQMUfUDdst+yn4KgCgh7vFSjdHZa2wgKUz+kIgySRb
CK0An2+SwlC4Z8lQAYGhF2XEBjEcTc2b
=I32U
-----END PGP SIGNATURE-----
Merge tag 'tty-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are two fixes that resolve reported issues, one with the 8250
driver, and the other with the generic fbcon driver.
Both have been in linux-next for a while"
* tag 'tty-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
fbcon: initialize blink interval before calling fb_set_par
Revert "serial: 8250_dma: don't bother DMA with small transfers"
Here are 4 iio driver fixes for 4.3-rc7, fixing some reported issues.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlYqpboACgkQMUfUDdst+ynA4wCdHD56pe0cNCX4yNrcLMlXqVSK
7tUAoIMVLgr3Q8NOWhfGEyKIV5WBDd4U
=bEcI
-----END PGP SIGNATURE-----
Merge tag 'staging-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are four iio driver fixes for 4.3-rc7, fixing some reported
issues. All of these have been in linux-next for a while"
* tag 'staging-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: mxs-lradc: Fix temperature offset
iio: accel: sca3000: memory corruption in sca3000_read_first_n_hw_rb()
iio: st_accel: fix interrupt handling on LIS3LV02
iio: adc: twl4030: Fix ADC[3:6] readings
6 serious fixes:
1) Hold the mutex around the find and corresponding update of our gid
2) The ifa list is rcu protected, copy its contents under rcu to avoid
using a freed structure
3) On error, netdev might be null, so check it before trying to release it
4) On init, if workqueue alloc fails, fail init
5) The new demux patches exposed a bug in mlx5 and ipath drivers, we need
to use the payload P_Key to determine the P_Key the packet arrived on
because the hardware doesn't tell us the truth
6) Due to a couple convoluted error flows, it is possible for the CM to
trigger a use_after_free and a double_free of rb nodes. Add two
checks to prevent that. This code has worked for 10+ years. It is
likely that some of the recent changes have caused this issue to
surface. The current patch will protect us from nasty events for
now while we track down why this is just now showing up.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fpXl
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull infiniband fixes from Doug Ledford:
"It's late in the game, I know, but these fixes seemed important enough
to warrant a late pull request. They all involve oopses or use after
frees or corruptions.
Six serious fixes:
- Hold the mutex around the find and corresponding update of our gid
- The ifa list is rcu protected, copy its contents under rcu to avoid
using a freed structure
- On error, netdev might be null, so check it before trying to
release it
- On init, if workqueue alloc fails, fail init
- The new demux patches exposed a bug in mlx5 and ipath drivers, we
need to use the payload P_Key to determine the P_Key the packet
arrived on because the hardware doesn't tell us the truth
- Due to a couple convoluted error flows, it is possible for the CM
to trigger a use_after_free and a double_free of rb nodes. Add two
checks to prevent that. This code has worked for 10+ years. It is
likely that some of the recent changes have caused this issue to
surface. The current patch will protect us from nasty events for
now while we track down why this is just now showing up"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/cm: Fix rb-tree duplicate free and use-after-free
IB/cma: Use inner P_Key to determine netdev
IB/ucma: check workqueue allocation before usage
IB/cma: Potential NULL dereference in cma_id_from_event
IB/core: Fix use after free of ifa
IB/core: Fix memory corruption in ib_cache_gid_set_default_gid
properly store flags in DM cache metadata's superblock).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWKneZAAoJEMUj8QotnQNahVIIAKNJ5kkOLTtlZqKeio0b6DmE
utvbNIbcesuBkg4rA67kDBgrTpxFiwaIyC5CBc9dEKzjJY9L+gJ59nXbLWKKu9N1
qBQOlnuYx/fdREDe00HObwZ7Fiw9ofBU71hdrZsHtntHHULEOBqFvnynglZA33Nb
vtBiupwO84uMY9eQdBhZudIb+F3PFF5uBkLfwlhaDmCugUdA9bivz0/P+7x6/Lt5
R25+3D0gF2gXU060An2ZBJaenkSMPYBoWGtpK6TJkQzlNMODc8y9opt0hsEwIJT8
A7TsJRXkjWPPA+DlVlqUd3yWpMKlBaC8o+TB1HvpfGqqCxiZQm7PgxNX8d/yd+E=
=7+lz
-----END PGP SIGNATURE-----
Merge tag 'dm-4.3-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Three stable fixes (two in btree code used by DM thinp and one to
properly store flags in DM cache metadata's superblock)"
* tag 'dm-4.3-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: the CLEAN_SHUTDOWN flag was not being set
dm btree: fix leak of bufio-backed block in btree_split_beneath error path
dm btree remove: fix a bug when rebalancing nodes after removal
Pull block layer fixes from Jens Axboe:
"A final set of fixes for 4.3.
It is (again) bigger than I would have liked, but it's all been
through the testing mill and has been carefully reviewed by multiple
parties. Each fix is either a regression fix for this cycle, or is
marked stable. You can scold me at KS. The pull request contains:
- Three simple fixes for NVMe, fixing regressions since 4.3. From
Arnd, Christoph, and Keith.
- A single xen-blkfront fix from Cathy, fixing a NULL dereference if
an error is returned through the staste change callback.
- Fixup for some bad/sloppy code in nbd that got introduced earlier
in this cycle. From Markus Pargmann.
- A blk-mq tagset use-after-free fix from Junichi.
- A backing device lifetime fix from Tejun, fixing a crash.
- And finally, a set of regression/stable fixes for cgroup writeback
from Tejun"
* 'for-linus' of git://git.kernel.dk/linux-block:
writeback: remove broken rbtree_postorder_for_each_entry_safe() usage in cgwb_bdi_destroy()
NVMe: Fix memory leak on retried commands
block: don't release bdi while request_queue has live references
nvme: use an integer value to Linux errno values
blk-mq: fix use-after-free in blk_mq_free_tag_set()
nvme: fix 32-bit build warning
writeback: fix incorrect calculation of available memory for memcg domains
writeback: memcg dirty_throttle_control should be initialized with wb->memcg_completions
writeback: bdi_writeback iteration must not skip dying ones
writeback: fix bdi_writeback iteration in wakeup_dirtytime_writeback()
writeback: laptop_mode_timer_fn() needs rcu_read_lock() around bdi_writeback iteration
nbd: Add locking for tasks
xen-blkfront: check for null drvdata in blkback_changed (XenbusStateClosing)
Pull Ceph fixes from Sage Weil:
"Two fixes.
One is a stopgap to prevent a stack blowout when users have a deep
chain of image clones. (We'll rewrite this code to be non-recursive
for the next window, but in the meantime this is a simple fix that
avoids a crash.)
The second fixes a refcount underflow"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
rbd: prevent kernel stack blow up on rbd map
rbd: don't leak parent_spec in rbd_dev_probe_parent()
Pull btrfs fixes from Chris Mason:
"I have two more small fixes this week:
Qu's fix avoids unneeded COW during fallocate, and Christian found a
memory leak in the error handling of an earlier fix"
* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: fix possible leak in btrfs_ioctl_balance()
btrfs: Avoid truncate tailing page if fallocate range doesn't exceed inode size
Use devm_* APIs to simplify the code.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
DW i2s controller's master/slave config can be read from a
read-only register. Machine driver can try to set a master/slave
format on cpu-dai using 'set_fmt' of dai ops. A check is added to
verify codec is master when dwc is slave and vice-versa.
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The first part of the comment is wrong since November 2007, delete it.
The second part of the comment is related to I2C_PEC, not I2C_SLAVE, so
move it where it belongs.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The ioctl is named I2C_RDWR for "I2C read/write". But references to it
were misspelled "rdrw". Fix them.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
In prima2 and atlas7, due to some hardware design issue. we
need to adjust the divider ratio a little according to i2c
bus frequency ranges.
Since i2c is open drain interface that allows the slave to
stall the transaction by holding the SCL line at '0', the RTL
implementation is waiting for SCL feedback from the pin after
setting it to High-Z ('1'). This wait adds to the high-time
interval counter few cycles of the input synchronization
(depending on the SCL_FILTER_REG field), and also the time it
takes for the board pull-up resistor to rise the SCL line.
For slow SCL settings these additions are negligible, but they
start to affect the speed when clock is set to faster frequencies.
This patch is based on the actual tests, and it makes SCL more
accurate.
Signed-off-by: Guoying Zhang <Guoying.Zhang@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This patch adds the LS2080a DTS files for QDS and RDB boards
which support the LS2080a SoC.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch updates the LS2080a simulator DTS to add support of various
peripherals which are supported on the simulator platform and explicitly
disables those which are yet not supported on the platform.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Checkpatch complains about the text suggesting writing to
Free Software Foundation for GPLv2 license copy.
This patch removes the same from the .dtsi and .dts
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A static code checker found a memory leak in the Versatile
ICST code. Fix it.
Fixes: a183da637c "clk: versatile: respect parent rate in ICST clock"
Reported-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
These APIs aren't used, so remove them. This can be reverted if
we get a user at some point.
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Suggested-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This patch updates the LS2080a DTSI (DTS Include) file to add
support for the following peripherals:
- USB 3.0 Host
- PMU
- CCN-504
- SATA
- SPI
- PCIe
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Jaiprakash Singh <b44839@freescale.com>
Signed-off-by: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since the Synopsys DWC3 controller driver inherits the generic bindings
defined in 'usb/generic.txt', this patch tries to capture the same in
the DWC3 binging documentation to avoid any confusion in usage of properties
like 'dr_mode' for certain SoCs like FSL LS2080A.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Update the FSL, GPIO binding documentation to add support
for GPIO controller found on Freescale's LS2080A platform.
Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The driver can not be used on a platform with common clock framework
until clk_prepare/clk_unprepare calls are added, otherwise clk_enable
calls will fail and a WARN is generated.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
According to Documentation/i2c/fault-codes the response to a bus NACK
should be -ENXIO, so fix the error code.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Since the same board components can be used across ARM and PPC board families,
this patch moves the FSL board-specific bindings out of bindings/powerpci.
While at it, this patch also adds the bindings for QIXIS FPGA controller
found on FSL LS2080A boards. These boards have an on-board FPGA/CPLD
connected to the IFC controller.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Jaiprakash Singh <b44839@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Freescale is renaming the LS2085A SoC to LS2080A. This patch
addresses the same.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Freescale will be a spinning-out a set of ARMv8 based SoCs which
will be based on a similar overall SoC architecture. So, this patch
converts the existing infrastructure in the arm64/dts, arm64/Kconfig
and arm64/configs to use the generic convention ARCH_LAYERSCAPE
in place of the more specific FSL_LS2085A, to save code duplication
later-on.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- some DT fixes: pullups, disabled property
- the PMC is now a syscon
- great improvement of sama5d2 support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KaMl
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt
Merge "Second batch of DT changes for 4.4" from Alexandre Belloni:
- some DT fixes: pullups, disabled property
- the PMC is now a syscon
- great improvement of sama5d2 support
* tag 'at91-ab-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: at91/dt: sama5d2: add missing devices
ARM: at91/dt: sama5d4: add the macb1 node
ARM: at91/dt: add pullup on mmc2 data signals
ARM: at91/dt: sama5d2_xplained: add regulator nodes
ARM: at91/dt: fix "disabled" property on at91rm9200
ARM: at91/dt: use syscon for PMC
up some omap5 issues to allow adding other omap5 boards. Also some other
fixes and clean-up:
- Fix SDIO WLAN for omap5 that's been broken for a while. As further
patches are still needed for wl18xx, no need for stable on this one.
- Move most of omap5 support into omap5-board-common.dtsi as most omap5
boards seem to share the same basic set of devices.
- Add minimal IGEPv5 support using based on omap5-board-common.dtsi
- Remove now unneedes gpio hogging for dra72-evm
- Update Javier Martinez Canillas email address
- Change earlier IGEP boards to use IOPAD pinmux macros
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJWJnbkAAoJEBvUPslcq6VzfYEP/0AuSHyu0hYSDjWZ9Rtjgomq
ntoY6nSKktkzrTiZYaZB1k1dVniv3s4ipHUjOFvSIDTww/bzl8p2Sinougvz4WOO
tYBIweZ8ZFrEXLhX0l4tkfKbL/h5N0AK2lClILPkhMIbsD25exViRQ4GSjFFofR9
ND9rCS0FsX8aOKMziQI0QTD51Ew82qXjVZBkOC+QakWheERDidrQ3CZ8R0zwenuq
UUCmPDQ/lPiK91YOamYoXbkajWHU28PKiVNFSe8Vsb5PuGXypZCEByOxTX5jCuun
UnKi4o+d5F+1chO/lKwfPpD1yHc4bG0DTPsUs15hxXnirT05wUX8KyzdfJpLeK9M
9K9bue/S7vT2aWQmD4uE1ta8e9AqFhU0y7PKuInld7sqlwqPcRfWQtSmXVqd4P7T
0Sz6c52208f3vm1MGg6gaIWwmLGSt4wYuiOKDIC1tVQqs3Z7IMKLifh2qrNHxnvh
Q7nSyPl0R8NcYQhv1qCIPUzT8sNxd3SNlT3EaOxmLIxP6z5QCuJOBozq8wDT0v+L
lBgy7nxSNAYTKdH+SP7bQyOptX3WCQc3rA8gXWbgjDbJUD4c9YOq9DJEs4pqDAqP
/TQMdMjPRzPVp5qxt4bUFGJLFPViNHi7NRbW4QCTfqKWVrr8zMow5KZ4vJtCHOkU
Sny+gIeda4tx6SonqGCm
=2bcN
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.4/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Merge "omap dts changes for v4.4 merge window, part 2" from Tony Lindgren:
Few more omap dts changes for v4.4 merge window, mostly to fix and clean
up some omap5 issues to allow adding other omap5 boards. Also some other
fixes and clean-up:
- Fix SDIO WLAN for omap5 that's been broken for a while. As further
patches are still needed for wl18xx, no need for stable on this one.
- Move most of omap5 support into omap5-board-common.dtsi as most omap5
boards seem to share the same basic set of devices.
- Add minimal IGEPv5 support using based on omap5-board-common.dtsi
- Remove now unneedes gpio hogging for dra72-evm
- Update Javier Martinez Canillas email address
- Change earlier IGEP boards to use IOPAD pinmux macros
* tag 'omap-for-v4.4/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-base0033: Use IOPAD pinmux macro
ARM: dts: am335x-igep0033: Use IOPAD pinmux macro
ARM: dts: omap3-igep0020: Use IOPAD pinmux macro
ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts
ARM: dts: Update Javier Martinez Canillas's email
ARM: dts: dra72-evm: remove cpsw gpio hogging and add mode-gpios
ARM: dts: Add basic support for isee igepv5
ARM: dts: Move most of omap5-uevm.dts to omap5-board-common.dtsi
ARM: dts: Fix WLAN regression on omap5-uevm
This patch adds the SMBUS PCI ID of Intel Broxton.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Specifying both console and stdout-path is redundant. Add options
":115200n8" to stdout-path and drop "console=ttyS0,115200".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Intel DNV SoC has the same legacy SMBus host controller than Intel
Sunrisepoint PCH. It also has same iTCO watchdog on the bus.
Add DNV PCI ID to the list of supported devices.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Extend the Samsung Exynos maintainer entry to match SoC documentation
and SoC dt-bindings directories. Without that some files, like
bindings/arm/samsung/pmu.txt, are not matched by existing patterns.
This also may serve as a hint where new documentation and bindings
(not matching specific subsystem) should be put.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Document compatibles used on other Exynos-based boards (non-Samsung):
FriendlyARM, Google, Hardkernel and Insignal.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Hakjoo Kim <ruppi.kim@hardkernel.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
Exynos SoC Device Tree bindings are spread over arm/exynos/ and
arm/samsung/ directories. There is no need for that separation and it
actually confuses. Put power domain bindings under power/ and
remaining samsung-boards.txt under arm/samsung/.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
-----------
- Use STiH418's A9 PLL
- Add Ethernet support to STiH407 family
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=nzUU
-----END PGP SIGNATURE-----
Merge tag 'sti-dt-for-v4.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti into next/dt
Merge "STi DT changes for v4.4, round 2" from Maxime Coquelin:
- Use STiH418's A9 PLL
- Add Ethernet support to STiH407 family
* tag 'sti-dt-for-v4.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti:
ARM: STi: DT: Add support for stih418 A9 pll
ARM: dts: Enable Ethernet on STi's B2199 board
ARM: dts: Enable Ethernet on STi's B2120 boards
ARM: dts: Add Ethernet node to STiH407 family
ARM: dts: Fix RGMII pinctrl timings
The change corrects cpu compatible property to a defined one,
see Documentation/devicetree/bindings/arm/cpus.txt
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The change corrects cpu compatible property to a defined one,
see Documentation/devicetree/bindings/arm/cpus.txt
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
mt65xx i2c controller initial setting will be cleared after system suspend,
so we should init mt65xx i2c controller again when system resume.
Signed-off-by: Liguo Zhang <liguo.zhang@mediatek.com>
Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Bruce points out that the increment of the seqid in stateids is not
serialized in any way, so it's possible for racing calls to bump it
twice and end up sending the same stateid. While we don't have any
reports of this problem it _is_ theoretically possible, and could lead
to spurious state recovery by the client.
In the current code, update_stateid is always followed by a memcpy of
that stateid, so we can combine the two operations. For better
atomicity, we add a spinlock to the nfs4_stid and hold that when bumping
the seqid and copying the stateid.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In order to allow the client to make a sane determination of what
happened with racing LAYOUTGET/LAYOUTRETURN/CB_LAYOUTRECALL calls, we
must ensure that the seqids return accurately represent the order of
operations. The simplest way to do that is to ensure that operations on
a single stateid are serialized.
This patch adds a mutex to the layout stateid, and locks it when
checking the layout stateid's seqid. The mutex is held over the entire
operation and released after the seqid is bumped.
Note that in the case of CB_LAYOUTRECALL we must move the increment of
the seqid and setting into a new cb "prepare" operation. The lease
infrastructure will call the lm_break callback with a spinlock held, so
and we can't take the mutex in that codepath.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
At least in the v4.0 case openowners can hang around for a while after
last close, but they shouldn't really block (for example), a new mount
with a different principal.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In bakeathon testing Solaris client was getting CLID_INUSE error when
doing a krb5 mount soon after an auth_sys mount, or vice versa.
That's not really necessary since in this case the old client doesn't
have any state any more:
http://tools.ietf.org/html/rfc7530#page-103
"when the server gets a SETCLIENTID for a client ID that
currently has no state, or it has state but the lease has
expired, rather than returning NFS4ERR_CLID_INUSE, the server
MUST allow the SETCLIENTID and confirm the new client ID if
followed by the appropriate SETCLIENTID_CONFIRM."
This doesn't fix the problem completely since our client_has_state()
check counts openowners left around to handle close replays, which we
should probably just remove in this case.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The caches used to store sunrpc authentication information can be
flushed by writing a timestamp to a file in /proc.
This timestamp has a one-second resolution and any entry in cache that
was last_refreshed *before* that time is treated as expired.
This is problematic as it is not possible to reliably flush the cache
without interrupting NFS service.
If the current time is written to the "flush" file, any entry that was
added since the current second started will still be treated as valid.
If one second beyond than the current time is written to the file
then no entries can be valid until the second ticks over. This will
mean that no NFS request will be handled for up to 1 second.
To resolve this issue we make two changes:
1/ treat an entry as expired if the timestamp when it was last_refreshed
is before *or the same as* the expiry time. This means that current
code which writes out the current time will now flush the cache
reliably.
2/ when a new entry in added to the cache - set the last_refresh timestamp
to 1 second *beyond* the current flush time, when that not in the
past.
This ensures that newly added entries will always be valid.
Now that we have a very reliable way to flush the cache, and also
since we are using "since-boot" timestamps which are monotonic,
change cache_purge() to set the smallest future flush_time which
will work, and leave it there: don't revert to '1'.
Also disable the setting of the 'flush_time' far into the future.
That has never been useful and is now awkward as it would cause
last_refresh times to be strange.
Finally: if a request is made to set the 'flush_time' to the current
second, assume the intent is to flush the cache and advance it, if
necessary, to 1 second beyond the current 'flush_time' so that all
active entries will be deemed to be expired.
As part of this we need to add a 'cache_detail' arg to cache_init()
and cache_fresh_locked() so they can find the current ->flush_time.
Signed-off-by: NeilBrown <neilb@suse.com>
Reported-by: Olaf Kirch <okir@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Any file which includes trace.h will need to include state.h, even if
they aren't using any state tracepoints. Ensure that we include any
headers that might be needed in trace.h instead of relying on the
*.c files to have the right ones.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The gss_key_timeout() function causes a harmless warning in some
configurations, e.g. ARM imx_v6_v7_defconfig with gcc-5.2, if the
compiler cannot figure out the state of the 'expire' variable across
an rcu_read_unlock():
net/sunrpc/auth_gss/auth_gss.c: In function 'gss_key_timeout':
net/sunrpc/auth_gss/auth_gss.c:1422:211: warning: 'expire' may be used uninitialized in this function [-Wmaybe-uninitialized]
To avoid this warning without adding a bogus initialization, this
rewrites the function so the comparison is done inside of the
critical section. As a side-effect, it also becomes slightly
easier to understand because the implementation now more closely
resembles the comment above it.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: c5e6aecd03 ("sunrpc: fix RCU handling of gc_ctx field")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently we have reference-counted per-net NSM RPC client
which created on the first monitor request and destroyed
after the last unmonitor request. It's needed because
RPC client need to know 'utsname()->nodename', but utsname()
might be NULL when nsm_unmonitor() called.
So instead of holding the rpc client we could just save nodename
in struct nlm_host and pass it to the rpc_create().
Thus ther is no need in keeping rpc client until last
unmonitor request. We could create separate RPC clients
for each monitor/unmonitor requests.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
