Remove all variables that are dead with this header
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove vntconfiguration.dat, iocmd.h and country.h
Set all channels are enabled as by rf type.
mac80211 will handles zones
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The functions iwctl_giwscan() and iwctl_siwscan() are only referenced
within iwctl.c -- so, remove their function declarations from iwctl.h
and mark these functions as static.
Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
priv->dev->name is now null change to dev_err
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove old eScanState code and use.
priv->hw->conf.chandef.chan->hw_value to find current channel
Check hw_value for bounds of vt3226d0_lo_current_table
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove BSSvUpdateNodeTxCounter which is not used. net_device_stats and wsats
will be removed later.
Change handling of ISR_BNTX to mac80211
Change handling of ISR_TBTT. Use IEEE80211_CONF_PS for WLAN_CMD_TBTT_WAKEUP
disable bChannelSwitch this is yet to be done.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wake up to listen to next beacon when struct ieee80211_conf -> listen_interval == 1
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove bMgrPrepareBeaconToSend
Check that vif is not null
Call vnt_beacon_make and turn on TCR_AUTOBCNTX.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert vnt_enable_power_saving and vnt_disable_power_saving
Remove mgmt->wCurrAID and use priv->current_aid
We nolonger send the PSbSendNullPacket from vnt_enable_power_saving
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use wBasicRate to find ofdm_rate.
wBasicRate is changed to u32 to match struct ieee80211_bss_conf -> basic_rates
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
start driver by linking vnt_init to vt6656_probe use bScheduleCommand
to schedule new command WLAN_CMD_INIT_MAC80211
vResetCommandTimer is now used to initiate command timer.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add rates and channels according to rf type for vnt_init_bands which is
a mac80211 replacement for CHvInitChannelTable.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create new functions for the operations of mac80211
vnt_tx_80211
vnt_start
vnt_stop
vnt_add_interface
vnt_remove_interface
vnt_config
vnt_bss_info_changed
vnt_prepare_multicast
vnt_configure
vnt_set_key
vnt_sw_scan_start
vnt_sw_scan_complete
vnt_get_tsf
vnt_set_tsf
vnt_reset_tsf
Create vnt_init to call device_init_registers to get permanent mac address.
This will be linked to vt6656_probe via bScheduleCommand in another patch as
firmware needs to be loaded first.
Modify vt6656_probe, vt6656_disconnect for mac80211
Change vt6656_suspend and vt6656_resume, nothing needs to be done here
let mac80211 handle the suspend.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create vnt_key_init_table to replace KeyvInitTable.
Create vnt_set_keymode to handle key setting operations with five different
modes VNT_KEY_DEFAULTKEY, VNT_KEY_GROUP_ADDRESS, VNT_KEY_ALLGROUP, VNT_KEY_GROUP
and VNT_KEY_PAIRWISE. VNT_KEY_ONFLY and VNT_KEY_ONFLY_ALL are for when
key latching in driver is not required.
Create vnt_set_keys to handle mac80211 key cipher modes, four modes are
supported WLAN_CIPHER_SUITE_WEP40, WLAN_CIPHER_SUITE_WEP104, WLAN_CIPHER_SUITE_TKIP
and WLAN_CIPHER_SUITE_CCMP.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create vnt_fill_txkey as mac80211 replacement for s_vFillTxKey.
Create vnt_tx_packet which a merger of s_bPacketToWirelessUsb, nsDMA_tx_packet
and csMgmt_xmit using mac80211 signalling.
Create vnt_beacon_xmit as mac80211 replacement for csBeacon_xmit. Changing
header in vnt_beacon_buffer to struct ieee80211_mgmt deleting some of
old code. vnt_beacon_make is needed to make beacon for vnt_beacon_xmit.
Create vnt_beacon_enable as mac80211 call to enable beacon.
vnt_fill_ieee80211_rts is modified to use struct ieee80211_hdr instead of
struct ethhdr and access to tx_context.
In s_nsBulkOutIoCompleteWrite modify context handling
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add mac80211 header and depends.
Create new function vnt_rx_data to receive 80211 packets which is based
on RXbBulkInProcessData and rx them into mac80211
The function also relays dbm, tsf_time(as mactime) and sets byBBPreEDRSSI and
uCurrRSSI.
skb is modified slightly to skb_put the maxium tail room in PIPEnsBulkInUsbRead
and trim back in vnt_rx_data. dev_alloc_skb is used to reallocate the sk_buff.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Managed device resource API replaces code that reinvents it for memory
allocation, page allocation and DMA mapping.
devm_add_action() is used for unwinding DMA mappings, since there is no
devm_* API for dma_map_single(). A recent patch that introduces such API
was rejected, mainly on the grounds that it may cause an unnecessary waste of
resources.
Suggested-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
