arm64: dts: rockchip: add rk3568 radxa e25
Signed-off-by: Mitchell Ma <machuang@radxa.com>
This commit is contained in:
Mitchell Ma
Stephen Chen
parent
171a878cef
commit
a45dd3868f
2 changed files with 446 additions and 0 deletions
|
|
@ -212,6 +212,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nvr-demo-v12-linux.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nvr-demo-v12-linux-spi-nand.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-pcie-ep-lp4x-v10-linux.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-cm3i-io.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-toybrick-sd0-android.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-toybrick-sd0-linux.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-toybrick-x0-android.dtb
|
||||
|
|
|
|||
445
arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
Normal file
445
arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
Normal file
|
|
@ -0,0 +1,445 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2020 Rockchip Electronics Co., Ltd.
|
||||
* Copyright (c) 2023 Radxa Computer (Shenzhen) Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3568-radxa-cm3i.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa E25 Carrier Board";
|
||||
compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568";
|
||||
|
||||
/delete-node/ fiq-debugger;
|
||||
|
||||
fiq-debugger {
|
||||
compatible = "rockchip,fiq-debugger";
|
||||
rockchip,serial-id = <2>;
|
||||
rockchip,wake-irq = <0>;
|
||||
/* If enable uart uses irq instead of fiq */
|
||||
rockchip,irq-mode-enable = <1>;
|
||||
rockchip,baudrate = <115200>; /* Only 115200 and 1500000 */
|
||||
interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
vcc5v0_usb: vcc5v0-usb {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_en>;
|
||||
regulator-name = "vcc5v0_usb";
|
||||
};
|
||||
|
||||
pcie30_3v3: pcie30-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie30_3v3";
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie3v3_en>;
|
||||
};
|
||||
|
||||
minipcie_3v3: minipcie_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&minipcie_en>;
|
||||
regulator-name = "vcc3v3_minipcie";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
//low:wifi,high:5G
|
||||
vcc3v3_minipcie_to_5g_or_wifi: vcc3v3-minipcie-to-5g-or-wifi {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-low;
|
||||
gpio = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc3v3_minipcie_to_5g_or_wifi_en>;
|
||||
regulator-name = "vcc3v3_minipcie_to_5g_or_wifi";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc3v3_pcie_30x1: vcc3v3-pci-30x1 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc3v3_pcie_30x1_en>;
|
||||
regulator-name = "vcc3v3_pci_30x1";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
em05_modem: em05-modem {
|
||||
compatible = "lte-em05-modem-platdata";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&em05_power_en &em05_airplane_mode &em05_reset>;
|
||||
em05,power-gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
em05,reset-gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
em05,airplane-gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
rgb0: rgb0 {
|
||||
compatible = "pwm-leds";
|
||||
status = "okay";
|
||||
|
||||
rgb0-red {
|
||||
pwms = <&pwm1 0 1000000 0>;
|
||||
max-brightness = <255>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
|
||||
rgb0-blue {
|
||||
pwms = <&pwm12 0 1000000 0>;
|
||||
max-brightness = <255>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
|
||||
rgb0-green {
|
||||
pwms = <&pwm2 0 1000000 0>;
|
||||
max-brightness = <255>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
};
|
||||
|
||||
adc_keys: adc-keys {
|
||||
status = "okay";
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
user-key {
|
||||
label = "macro";
|
||||
linux,code = <KEY_MACRO>;
|
||||
press-threshold-microvolt = <1750>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "active";
|
||||
pinctrl-0 = <&pwm1m0_pins>;
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "active";
|
||||
pinctrl-0 = <&pwm2m0_pins>;
|
||||
};
|
||||
|
||||
&pwm12 {
|
||||
status = "okay";
|
||||
pinctrl-names = "active";
|
||||
pinctrl-0 = <&pwm12m1_pins>;
|
||||
};
|
||||
|
||||
&u2phy0_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
vbus-supply = <&vcc5v0_usb>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3 {
|
||||
extcon=<&usb2phy0>;
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd30 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbhost_dwc3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbhost30 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy0_us {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1_usq {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rk809_codec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy2_psq {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x2 {
|
||||
reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&pcie30_3v3>;
|
||||
pinctrl-0 = <&pcie30x2m1_pins>;
|
||||
rockchip,bifurcation;
|
||||
status = "okay";
|
||||
|
||||
pcie@40 {
|
||||
reg = <0x00400000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
|
||||
rtl8125_1: pcie-eth@40,0 {
|
||||
compatible = "pci10ec,8125";
|
||||
reg = <0x000000 0 0 0 0>;
|
||||
|
||||
// LED0 => G+ , LED1 => G- , LED2 => Y-
|
||||
// LED0=High active, blink on every speed act
|
||||
// LED1=Low active, always on every speed link
|
||||
// LED2=LED1
|
||||
realtek,led-data = <0x1200 0x2b 0x2b 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie3x1 {
|
||||
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&pcie30_3v3>;
|
||||
pinctrl-0 = <&pcie30x1m1_pins>;
|
||||
rockchip,bifurcation;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie2x1 {
|
||||
reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&pcie30_3v3>;
|
||||
pinctrl-0 = <&pcie20m2_pins>;
|
||||
status = "okay";
|
||||
|
||||
pcie@40 {
|
||||
reg = <0x00400000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
|
||||
rtl8125_2: pcie-eth@40,0 {
|
||||
compatible = "pci10ec,8125";
|
||||
reg = <0x000000 0 0 0 0>;
|
||||
|
||||
// LED0 => G+ , LED1 => G- , LED2 => Y-
|
||||
// LED0=High active, blink on every speed act
|
||||
// LED1=Low active, always on every speed link
|
||||
// LED2=LED1
|
||||
realtek,led-data = <0x1200 0x2b 0x2b 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sata1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
usb {
|
||||
vcc5v0_en: vcc5v0-en {
|
||||
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
pcie3v3_en: pcie3v3-en {
|
||||
rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
minipcie_en: vcc3v3-minipcie-en {
|
||||
rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc3v3_minipcie_to_5g_or_wifi_en: vcc3v3-minipcie-to-5g-or-wifi-en {
|
||||
rockchip,pins = <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie_30x1_en: vcc3v3-pcie-30x1-en {
|
||||
rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
lte-em05-modem {
|
||||
em05_airplane_mode: em05-airplane-mode {
|
||||
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
em05_power_en: em05-power-en {
|
||||
rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
em05_reset: em05-reset {
|
||||
rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
gpio-line-names =
|
||||
/* GPIO0_A0-A3 */
|
||||
"", "", "", "",
|
||||
/* GPIO0_A4-A7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO0_B0-B3 */
|
||||
"", "", "", "",
|
||||
/* GPIO0_B4-B7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO0_C0-C3 */
|
||||
"", "", "", "",
|
||||
/* GPIO0_C4-C7 */
|
||||
"", "", "PIN_18", "",
|
||||
|
||||
/* GPIO0_D0-D3 */
|
||||
"", "", "", "",
|
||||
/* GPIO0_D4-D7 */
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
gpio-line-names =
|
||||
/* GPIO1_A0-A3 */
|
||||
"PIN_3", "PIN_5", "", "",
|
||||
/* GPIO1_A4-A7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO1_B0-B3 */
|
||||
"", "", "", "",
|
||||
/* GPIO1_B4-B7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO1_C0-C3 */
|
||||
"", "", "", "",
|
||||
/* GPIO1_C4-C7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO1_D0-D3 */
|
||||
"", "", "", "",
|
||||
/* GPIO1_D4-D7 */
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio2 {
|
||||
gpio-line-names =
|
||||
/* GPIO2_A0-A3 */
|
||||
"", "", "", "",
|
||||
/* GPIO2_A4-A7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO2_B0-B3 */
|
||||
"", "", "", "",
|
||||
/* GPIO2_B4-B7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO2_C0-C3 */
|
||||
"", "", "", "",
|
||||
/* GPIO2_C4-C7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO2_D0-D3 */
|
||||
"PIN_21", "PIN_19", "PIN_16", "PIN_23",
|
||||
/* GPIO2_D4-D7 */
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
gpio-line-names =
|
||||
/* GPIO3_A0-A3 */
|
||||
"", "PIN_17", "", "PIN_12",
|
||||
/* GPIO3_A4-A7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO3_B0-B3 */
|
||||
"", "", "", "",
|
||||
/* GPIO3_B4-B7 */
|
||||
"", "", "", "PIN_7",
|
||||
|
||||
/* GPIO3_C0-C3 */
|
||||
"PIN_26", "PIN_15", "PIN_8", "PIN_10",
|
||||
/* GPIO3_C4-C7 */
|
||||
"PIN_11", "PIN_13", "", "",
|
||||
|
||||
/* GPIO3_D0-D3 */
|
||||
"", "", "", "",
|
||||
/* GPIO3_D4-D7 */
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio4 {
|
||||
gpio-line-names =
|
||||
/* GPIO4_A0-A3 */
|
||||
"", "", "", "",
|
||||
/* GPIO4_A4-A7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO4_B0-B3 */
|
||||
"", "", "", "",
|
||||
/* GPIO4_B4-B7 */
|
||||
"", "", "", "",
|
||||
|
||||
/* GPIO4_C0-C3 */
|
||||
"", "", "", "",
|
||||
/* GPIO4_C4-C7 */
|
||||
"", "", "PIN_24", "",
|
||||
|
||||
/* GPIO4_D0-D3 */
|
||||
"", "", "", "",
|
||||
/* GPIO4_D4-D7 */
|
||||
"", "", "", "";
|
||||
};
|
||||
Loading…
Add table
Add a link
Reference in a new issue