In case of firmmware detected under-run condition and scsi status of
task_set_full or busy_condition, return that to the mid layer for proper error
handling instead of DID_ERROR (which causes error handler activation and a
full retry).
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
This test is always true so it means we revalidate the length every
time, which generates more network traffic. When it is SEEK_SET or
SEEK_CUR, then we don't need to revalidate.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Things have slowed down a lot for us, but we have five more fixes for
omap and kirkwood below. Three are for boards setup issues, two are
SoC-level fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=GX6x
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM: SoC fixes from Olof Johansson:
"Things have slowed down a lot for us, but we have five more fixes for
omap and kirkwood below. Three are for boards setup issues, two are
SoC-level fixes."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: OMAP: igep0020: fix smsc911x dummy regulator id
ARM: orion5x: Fix GPIO enable bits for MPP9
ARM: kirkwood: add missing kexec.h include
ARM: OMAP: Revert "ARM: OMAP: ctrl: Fix CONTROL_DSIPHY register fields"
ARM: OMAP1: Amstrad Delta: Fix wrong IRQ base in FIQ handler
This is a last minute bug fix that was only just noticed since the code
path that's being exercised here is one that is fairly rarely used. The
changelog for the change itself is extremely clear and the code itself
is obvious to inspection so should be pretty safe.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=xcal
-----END PGP SIGNATURE-----
Merge tag 'regmap-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull last minute regman bug fix from Mark Brown:
"This is a last minute bug fix that was only just noticed since the
code path that's being exercised here is one that is fairly rarely
used. The changelog for the change itself is extremely clear and the
code itself is obvious to inspection so should be pretty safe."
* tag 'regmap-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: fix possible memory corruption in regmap_bulk_read()
Pull KVM fixes from Avi Kivity:
"Two asynchronous page fault fixes (one guest, one host), a powerpc
page refcount fix, and an ia64 build fix."
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: ia64: fix build due to typo
KVM: PPC: Book3S HV: Fix refcounting of hugepages
KVM: Do not take reference to mm during async #PF
KVM: ensure async PF event wakes up vcpu from halt
Pull powerpc fixes from Benjamin Herrenschmidt:
"Here are a couple of last minute fixes for 3.4 for regressions
introduced by my rewrite of the lazy irq masking code."
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/irq: Make alignment & program interrupt behave the same
powerpc/irq: Fix bug with new lazy IRQ handling code
Kmemleak tracks the percpu allocations via a specific API and the
originally allocated areas must be removed from kmemleak (via
kmemleak_free). The code was already doing this for SMP systems.
Reported-by: Sami Liedes <sami.liedes@iki.fi>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
pcpu_embed_first_chunk() allocates memory for each node, copies percpu
data and frees unused portions of it before proceeding to the next
group. This assumes that allocations for different nodes doesn't
overlap; however, depending on memory topology, the bootmem allocator
may end up allocating memory from a different node than the requested
one which may overlap with the portion freed from one of the previous
percpu areas. This leads to percpu groups for different nodes
overlapping which is a serious bug.
This patch separates out copy & partial free from the allocation loop
such that all allocations are complete before partial frees happen.
This also fixes overlapping frees which could happen on allocation
failure path - out_free_areas path frees whole groups but the groups
could have portions freed at that point.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Reported-by: "Pavel V. Panteleev" <pp_84@mail.ru>
Tested-by: "Pavel V. Panteleev" <pp_84@mail.ru>
LKML-Reference: <E1SNhwY-0007ui-V7.pp_84-mail-ru@f220.mail.ru>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=k8QU
-----END PGP SIGNATURE-----
Merge tag 'omap-fixes-for-v3.4-rc6-take-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fix two board spefific regressions and one regression caused by bad documentation
By Archit Taneja (1) and others
via Tony Lindgren
* tag 'omap-fixes-for-v3.4-rc6-take-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP: igep0020: fix smsc911x dummy regulator id
ARM: OMAP: Revert "ARM: OMAP: ctrl: Fix CONTROL_DSIPHY register fields"
ARM: OMAP1: Amstrad Delta: Fix wrong IRQ base in FIQ handler
id 0 is already used and causes errors at boot:
WARNING: at fs/sysfs/dir.c:508 sysfs_add_one+0x9c/0xac()
sysfs: cannot create duplicate filename '/devices/platform/reg-fixed-voltage.0'
Fix it by using the next available one (id=1).
This was caused by 5b3689f4 (ARM: OMAP2+: smsc911x: Add fixed
board regulators) that did not account for some regulators
already being used.
Signed-off-by: Enrico Butera <ebutera@users.berlios.de>
[tony@atomide.com: updated comments for regression causing commit]
Signed-off-by: Tony Lindgren <tony@atomide.com>
The function regmap_bulk_read() calls the regmap_read() for
each register if set of register has volatile and cache is
enabled. In this case, last few register read makes the memory
corruption if the register size is not the size of unsigned int.
The regam_read() takes argument as unsigned int for returning
value and it update the value as
*val = map->format.parse_val(map->work_buf);
This causes complete 4 bytes (size of unsigned int) to get written.
Now if client pass the memory pointer for value which is equal to the
required size of register count in regmap_bulk_read() then last few
register read actually update the memory beyond passed pointer size.
Avoid this by using local variable for read and then do memcpy()
for actual byte copy to passed pointer based on register size.
I allocated one pointer ptr and take first 16 bytes dump of that
pointer then call regmap_bulk_read() with pointer which is just
on top of this allocated pointer and register count of 128. Here
register size is 1 byte.
The memory trace of last 5 register read are as follows:
[ 5.438589] regmap_bulk_read after regamp_read() for register 122
[ 5.447421] 0xef993c20 0xef993c00 0x00000000 0x00000001
[ 5.467535] regmap_bulk_read after regamp_read() for register 123
[ 5.476374] 0xef993c20 0xef993c00 0x00000000 0x00000001
[ 5.496425] regmap_bulk_read after regamp_read() for register 124
[ 5.505260] 0xef993c20 0xef993c00 0x00000000 0x00000001
[ 5.525372] regmap_bulk_read after regamp_read() for register 125
[ 5.534205] 0xef993c00 0xef993c00 0x00000000 0x00000001
[ 5.554258] regmap_bulk_read after regamp_read() for register 126
[ 5.563100] 0xef990000 0xef993c00 0x00000000 0x00000001
[ 5.554258] regmap_bulk_read after regamp_read() for register 127
[ 5.587108] 0xef000000 0xef993c00 0x00000000 0x00000001
Here it is observed that the memory content at first word started changing
on last 3 regmap_read() and so corruption happened.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
An API update which wasn't sufficiently thorough in updating the tree...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=HF38
-----END PGP SIGNATURE-----
Merge tag 'asoc-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Build fix for SH in 3.4
An API update which wasn't sufficiently thorough in updating the tree...
Fix a recent compilation breakage, caused by a change in SH clock API.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
When an IRQ for some reason gets lost, we wait up to a second using
udelay, which is CPU intensive. This patch improves the situation by
waiting about 30 ms in the CPU intensive mode, then stepping down to
using msleep(2) instead. In essence, we trade some granularity in
exchange for less CPU consumption when the waiting time is a bit longer.
As a result, PulseAudio should no longer be killed by the kernel
for taking up to much RT-prio CPU time. At least not for *this* reason.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Tested-by: Arun Raghavan <arun.raghavan@collabora.co.uk>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
By Ben Hutchings (1) and Ian Campbell (1)
via Jason Cooper: "ARM: kirkwood: fixes for v3.4"
* 'kirkwood_fixes_for_v3.4' of git://git.infradead.org/users/jcooper/linux-kirkwood:
ARM: orion5x: Fix GPIO enable bits for MPP9
ARM: kirkwood: add missing kexec.h include
Alignment was the last user of the ENABLE_INTS macro, which we can
now remove. All non-syscall exceptions now disable interrupts on
entry, they get re-enabled conditionally from C code. Don't
unconditionally re-enable in program check either, check the
original context.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
We had a case where we could turn on hard interrupts while
leaving the PACA_IRQ_HARD_DIS bit set in the PACA. This can
in turn cause a BUG_ON() to hit in __check_irq_replay() due
to interrupt state getting out of sync.
The assembly code was also way too convoluted. Instead, we
now leave it to the C code to do the right thing which ends
up being smaller and more readable.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The r8169 may get stuck or show bad behaviour after activating TSO :
the net_device is not stopped when it has no more TX descriptors.
This problem comes from TX_BUFS_AVAIL which may reach -1 when all
transmit descriptors are in use. The patch simply tries to keep positive
values.
Tested with 8111d(onboard) on a D510MO, and with 8111e(onboard) on a
Zotac 890GXITX.
Signed-off-by: Julien Ducourthial <jducourt@free.fr>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A call to request_mem_region() has been introduced in the omap-gpio
driver recently (commit 96751fcbe5,
"gpio/omap: Use devm_ API and add request_mem_region"). This change
prevented the Amstrad Delta NAND driver, which was doing the same in
order to take control over OMAP MPU I/O lines that the NAND device hangs
off, from loading successfully.
The I/O lines and corresponding registers used by the NAND driver are a
subset of those used for the GPIO function. Then, to avoid run time
collisions, all MPUIO GPIO lines should be marked as requested while
initializing the NAND driver, and vice versa, a single MPUIO GPIO line
already requested before the NAND driver initialization is attempted
should prevent the NAND device from being started successfully.
There is another driver, omap-keypad, which also manipulates MPUIO
registers, but has never been calling request_mem_region() on startup,
so it's not affected by the change in the gpio-omap and works correctly.
It uses the depreciated omap_read/write functions for accessing MPUIO
registers. Unlike the NAND driver, these I/O lines and registers are
separate from those used by the GPIO driver. However, both register sets
are non-contiguous and overlapping, so it would be impractical to
request the two sets separately, one from the gpio-omap, the other form
the omap-keypad driver.
In order to solve all these issues correctly, a solution first suggested
by Artem Bityutskiy, then closer specified by Tony Lindgren while they
commented the initial version of this fix, should be implemented. The
gpio-omap driver should export a few functions which would allow the
other two drivers to access MPUIO registers in a safe manner instead of
trying to manage them in parallel to the GPIO driver. However, such a
big change, affecting 3 drivers all together, is not suitable for the rc
cycle, and should be prepared for the merge window. Then, an
alternative solution is proposed as a regression fix.
For the ams-delta NAND driver to initialize correctly in coexistence
with the changed GPIO driver, drop the request_mem_region() call from
the former, especially as this call is going to be removed while the
long-term solution is implemented.
Tested on Amstrad Delta.
Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Commit 554cdaefd1 ('ARM: orion5x: Refactor
mpp code to use common orion platform mpp.') seems to have accidentally
inverted the GPIO valid bits for MPP9 (only). For the mv2120 platform
which uses MPP9 as a GPIO LED device, this results in the error:
[ 12.711476] leds-gpio: probe of leds-gpio failed with error -22
Reported-by: Henry von Tresckow <hvontres@gmail.com>
References: http://bugs.debian.org/667446
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org [v3.0+]
Tested-by: Hans Henry von Tresckow <hvontres@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
One small fix for an edge condition in the max8997 driver and a fix for
a surprise in the devres API which caused devm_regulator_put() to not
actually put the regulator - a nicer version of this based on an
improvement of the devres API is queued for 3.5.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Q7eh
-----END PGP SIGNATURE-----
Merge tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"One small fix for an edge condition in the max8997 driver and a fix
for a surprise in the devres API which caused devm_regulator_put() to
not actually put the regulator - a nicer version of this based on an
improvement of the devres API is queued for 3.5."
* tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Actually free the regulator in devm_regulator_put()
regulator: Fix the logic to ensure new voltage setting in valid range
Fixes the following build error when CONFIG_KEXEC is enabled:
CC arch/arm/mach-kirkwood/board-dt.o
arch/arm/mach-kirkwood/board-dt.c: In function 'kirkwood_dt_init':
arch/arm/mach-kirkwood/board-dt.c:52:2: error: 'kexec_reinit' undeclared (first use in this function)
arch/arm/mach-kirkwood/board-dt.c:52:2: note: each undeclared identifier is reported only once for each function it appears in
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
[v4, rebase onto recent Linus for repost]
[v3, speak actual English in the commit message, thanks Sergei Shtylyov]
[v2, using linux/kexec.h not asm/kexec.h]
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Pull drm fixes from Dave Airlie:
"Two fixes from Intel, one a regression, one because I merged an early
version of a fix.
Also the nouveau revert of the i2c code that was tested on the list."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau/i2c: resume use of i2c-algo-bit, rather than custom stack
drm/i915: Do no set Stencil Cache eviction LRA w/a on gen7+
drm/i915: disable sdvo hotplug on i945g/gm
* fix to Kconfig to make it fit within 80 line characters,
* two bootup fixes (AMD 8-core and with PCI BIOS),
* cleanup code in a Xen PV fb driver,
* and a crash fix when trying to see non-existent PTE's
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJPp/iaAAoJEFjIrFwIi8fJAFsH/1NVxvOAHyzyczU49U/1vi8T
d67kIb8fFHni6HO7BiBkuM8DricGQnDhP7uC1n9waWf8jRiYsPTAbesyedTLbQos
SLfzpsLWKilJOxWCf17cBnm6i9ScQn1ioJ6h3jFzHgNCXnvvAVYqfKHW0V6HTErH
JL0eb4+asiZgXNSeac1gabQlai6LuBzMWaFgzRGY+hDnCQhkdQfDkD7X5zEhUUmH
jUmtSxRx+5LkfelwRb2kHhI5j58ilOEa7YLZFQc3C+2+bUvgsG9vJDsQ3jwFaGDn
cryfRY9WJXxgcXqk1ClOnk9U9PGzRc48gdLVLhYuLsIvUWN7RzgRlBMsH33Gq9M=
=kjvX
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-3.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull xen fixes from Konrad Rzeszutek Wilk:
- fix to Kconfig to make it fit within 80 line characters,
- two bootup fixes (AMD 8-core and with PCI BIOS),
- cleanup code in a Xen PV fb driver,
- and a crash fix when trying to see non-existent PTE's
* tag 'stable/for-linus-3.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/Kconfig: fix Kconfig layout
xen/pci: don't use PCI BIOS service for configuration space accesses
xen/pte: Fix crashes when trying to see non-existent PGD/PMD/PUD/PTEs
xen/apic: Return the APIC ID (and version) for CPU 0.
drivers/video/xen-fbfront.c: add missing cleanup code
Pull two percpu fixes from Tejun Heo:
"One adds missing KERN_CONT on split printk()s and the other makes
the percpu allocator avoid using PMD_SIZE as atom_size on x86_32.
Using PMD_SIZE led to vmalloc area exhaustion on certain
configurations (x86_32 android) and the only cost of using PAGE_SIZE
instead is static percpu area not being aligned to large page
mapping."
* 'for-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu, x86: don't use PMD_SIZE as embedded atom_size on 32bit
percpu: use KERN_CONT in pcpu_dump_alloc_info()
Pull ARM fixes from Russell King:
"This is mainly audit fixes, found by folks who happened to enable this
feature and then found it broke their user applications."
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7414/1: SMP: prevent use of the console when using idmap_pgd
ARM: 7412/1: audit: use only AUDIT_ARCH_ARM regardless of endianness
ARM: 7411/1: audit: fix treatment of saved ip register during syscall tracing
ARM: 7410/1: Add extra clobber registers for assembly in kernel_execve
The function vb2_dma_contig_vaddr returns a void * not an integer.
Quiets the sparse noise:
warning: Using plain integer as NULL pointer
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Include the header to pickup the definitions of the exported symbols.
Quiets the following sparse warnings:
warning: symbol 'vb2_dma_contig_memops' was not declared. Should it be static?
warning: symbol 'vb2_dma_contig_init_ctx' was not declared. Should it be static?
warning: symbol 'vb2_dma_contig_cleanup_ctx' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There is no needs to keep .remove under .exit.text. This driver is for a
standalone chip that could be on any board and connected to any i2c bus.
At the same time we don't need to keep the as3645a_probe() after initializing
the device. Therefore we mark it and relevant functions with __devinit tag.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The mf_low value must be a multiple of mf_inc. Round it up to the
nearest mf_inc multiple after computing it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
If RSS is disabled on the PF (efx->n_rx_channels == 1) we try to set
up the indirection table so that VFs can use it, setting
efx->rss_spread = efx_vf_size(efx). But if SR-IOV was disabled at
compile time, this evaluates to 0 and we end up dividing by zero when
initialising the table.
I considered changing the fallback definition of efx_vf_size() to
return 1, but its value is really meaningless if we are not going to
enable VFs. Therefore add a condition of efx_sriov_wanted(efx) in
efx_probe_interrupts().
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Support for the legacy crop API is emulated in the subdev core.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Support for the legacy crop API is emulated in the subdev core.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Configure CFA interpolation automatically based on the input format.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
For consistency reasons, rename the last remaining occurences of
rgb_to_ycbcr to csc (color space conversion).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When applications modify preview engine parameters, the new values are
applied to the hardware by the preview engine interrupt handler during
vertical blanking. If the parameters are being changed when the
interrupt handler is called, it just delays applying the parameters
until the next frame.
If an application modifies the parameters for every frame, and the
preview engine interrupt is triggerred synchronously, the parameters are
never applied to the hardware.
Fix this by storing new parameters in a shadow copy, and switch the
active parameters with the shadow values atomically.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of using a large switch/case statement to return offsets to and
sizes of individual preview engine parameters in the parameters and
configuration structures, store the information in the update_attrs
table and use it at runtime.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Rename the blk_adj and rgb2ycbcr fields to blkadj and csc respectively.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The feature_bit is always equal to 1 << array position, remove it and
compute the value dynamically.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The preview engine parameters are referenced by a value suitable for
being used in a bitmask. Two macros named OMAP3ISP_PREV_* and PREV_* are
declared for each parameter and are used interchangeably. Remove the
private macro.
Replace the configuration bit field in the parameter update attributes
structure with a boolean that indicates whether the parameter can be
updated through the preview engine configuration ioctl.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
