The patch fixes the following checkpatch.pl errors:
ERROR: that open brace { should be on the previous line.
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following sparse warnings:
drivers/staging/vt6655/wmgr.c:970:42: warning: Using plain integer as NULL pointer
drivers/staging/vt6655/wmgr.c:971:41: warning: Using plain integer as NULL pointer
drivers/staging/vt6655/wmgr.c:972:38: warning: Using plain integer as NULL pointer
drivers/staging/vt6655/wmgr.c:973:43: warning: Using plain integer as NULL pointer
drivers/staging/vt6655/wmgr.c:4110:37: warning: Using plain integer as NULL pointer
drivers/staging/vt6655/wmgr.c:4111:41: warning: Using plain integer as NULL pointer
drivers/staging/vt6655/wmgr.c:4112:34: warning: Using plain integer as NULL pointer
drivers/staging/vt6655/wmgr.c:4113:30: warning: Using plain integer as NULL pointer
drivers/staging/vt6655/wmgr.c:4114:35: warning: Using plain integer as NULL pointer
drivers/staging/vt6655/wmgr.c:4123:32: warning: Using plain integer as NULL pointer
drivers/staging/vt6655/wmgr.c:1815:41: warning: Using plain integer as NULL pointer
drivers/staging/vt6655/wmgr.c:1816:34: warning: Using plain integer as NULL pointer
drivers/staging/vt6655/wmgr.c:1817:30: warning: Using plain integer as NULL pointer
drivers/staging/vt6655/wmgr.c:1818:35: warning: Using plain integer as NULL pointer
drivers/staging/vt6655/wmgr.c:2075:63: warning: Using plain integer as NULL pointer
The following coccinelle script was used to achieve this:
@rule1@
expression *x;
@@
(
- x = 0;
+ x = NULL;
|
- (x == 0)
+ (x == NULL)
|
- (x != 0)
+ (x != NULL)
)
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed some minor checkpatch warnings such as whitespace.
Coccinelle was used for this patch (NOTE: some of the changes were made by hand). The script is not complete (semantically) and might raise some checkpatch warnings in terms of indentation depending on existing code.
*** IFASSIGNMENT.COCCI START ***
/* Coccinelle script to handle assignments in if statements
* For compound statements, can so far only handle statements with the
* assignment on either extreme */
/* This rule is for simple cases
* e.g. just an assignment in if, possibly with unary operator */
@simple@
expression E1, E2;
statement S1, S2;
@@
+ E1 = E2;
if (
- (E1 = E2)
+ E1
)
S1 else S2
/* This rule is for compound statements where the assignment is on the right.*/
@right@
expression E, E1, E2;
statement S1, S2;
@@
(
/* and */
- if (E && (E1 = E2))
+ if (E) {
+ E1 = E2;
+ if (E1)
S1 else S2
+ } else S2
|
- if (E && (E1 = E2))
+ if (E) {
+ E1 = E2;
+ if (E1)
S1
+ }
/* or */
|
- if (E || (E1 = E2))
+ if (!E) {
+ E1 = E2;
+ if (E1)
S1 else S2
+ }
+ else S1
|
- if (E || (E1 = E2))
+ if (!E) {
+ E1 = E2;
+ if (E1) S1
+ } else
S1
/* not equal */
|
- if (E != (E1 = E2))
+ E1 = E2;
+ if (E != E1)
S1 else S2
|
- if (E != (E1 = E2))
+ E1 = E2;
+ if (E != E1)
S1
/* equal */
|
- if (E == (E1 = E2))
+ E1 = E2;
+ if (E == E1)
S1 else S2
|
- if (E == (E1 = E2))
+ E1 = E2;
+ if (E == E1)
S1
/* greater than */
|
- if (E > (E1 = E2))
+ E1 = E2;
+ if (E > E1)
S1 else S2
|
- if (E > (E1 = E2))
+ E1 = E2;
+ if (E > E1)
S1
/* less than */
|
- if (E < (E1 = E2))
+ E1 = E2;
+ if (E < E1)
S1 else S2
|
- if (E < (E1 = E2))
+ E1 = E2;
+ if (E < E1)
S1
/* lesser than or equal to */
|
- if (E <= (E1 = E2))
+ E1 = E2;
+ if (E <= E1)
S1 else S2
|
- if (E <= (E1 = E2))
+ E1 = E2;
+ if (E <= E1)
S1
/* greater than or equal to */
|
- if (E >= (E1 = E2))
+ E1 = E2;
+ if (E >= E1)
S1 else S2
|
- if (E >= (E1 = E2))
+ E1 = E2;
+ if (E >= E1)
S1
)
/* This rule is for compound statements where the assignment is on the left.*/
@left@
expression E, E1, E2;
statement S1, S2;
@@
(
/* and */
- if ((E1 = E2) && E)
+ E1 = E2;
+ if (E1 && E)
S1 else S2
|
- if ((E1 = E2) && E)
+ E1 = E2;
+ if (E1 && E)
S1
|
/* or */
- if ((E1 = E2) || E)
+ E1 = E2;
+ if (E1 || E)
S1
|
- if ((E1 = E2) || E)
+ E1 = E2;
+ if (E1 || E)
S1 else S2
|
/* not equal */
- if ((E1 = E2) != E)
+ E1 = E2;
+ if (E1 != E)
S1
|
- if ((E1 = E2) != E)
+ E1 = E2;
+ if (E1 != E)
S1 else S2
|
/* equal */
- if ((E1 = E2) == E)
+ E1 = E2;
+ if (E1 == E)
S1
|
- if ((E1 = E2) == E)
+ E1 = E2;
+ if (E1 == E)
S1 else S2
|
/* greater */
- if ((E1 = E2) > E)
+ E1 = E2;
+ if (E1 > E)
S1
|
- if ((E1 = E2) > E)
+ E1 = E2;
+ if (E1 > E)
S1 else S2
|
/* less */
- if ((E1 = E2) < E)
+ E1 = E2;
+ if (E1 < E)
S1
|
- if ((E1 = E2) < E)
+ E1 = E2;
+ if (E1 < E)
S1 else S2
/* lesser than or equal to */
- if ((E1 = E2) <= E)
+ E1 = E2;
+ if (E1 <= E)
S1
|
- if ((E1 = E2) <= E)
+ E1 = E2;
+ if (E1 <= E)
S1 else S2
/* greater than or equal to */
- if ((E1 = E2) >= E)
+ E1 = E2;
+ if (E1 >= E)
S1
|
- if ((E1 = E2) >= E)
+ E1 = E2;
+ if (E1 >= E)
S1 else S2
)
*** IFASSIGNMENT.COCCI END ***
Signed-off-by: Chi Pham <fempsci@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl issues with line over 80
characters in dgrp_tty.c
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the TODO file suggests, move firmware file macros from the header
file to the file that deals with firmware. In the process also move
MODULE_FIRMWARE() instances to the same file. Remove the relevant item
from the TODO file.
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl issues with line over 80 characters in nokia_core.c
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes unnecessary variable assignments which are
assigned immediately after the first initialization.
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces rtw_zmalloc with kzalloc in function
rtw_setstandby_cmd. There are no locks, hence GFP_KERNEL flag is used.
Signed-off-by: Elena Oat <oat.elena@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following sparse warnings:
drivers/staging/cxt1e1/linux.c:106:13: warning: symbol 'log_level_default' was not declared. Should it be static?
drivers/staging/cxt1e1/linux.c:110:13: warning: symbol 'max_mru_default' was not declared. Should it be static?
drivers/staging/cxt1e1/linux.c:255:1: warning: symbol 'c4_linux_interrupt' was not declared. Should it be static?
drivers/staging/cxt1e1/linux.c:265:1: warning: symbol 'c4_ebus_interrupt' was not declared. Should it be static?
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes "do not use // C99 comments" errors in linux.c
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl issues with line over 80
characters in comet.c
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patch fixes the following checkpatch.pl warnings:
WARNING: Unnecessary space after function pointer name.
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tnetv107x platform is getting removed, so this driver
will not be needed any more.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
The networking core does it for the driver during registration time.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When compiling the i40e and the i40evf driver into the same kernel I get:
LD drivers/net/ethernet/intel/built-in.o
drivers/net/ethernet/intel/i40evf/built-in.o:(.data+0x300): multiple definition of `i40e_ptype_lookup'
drivers/net/ethernet/intel/i40e/built-in.o:(.data+0x780): first defined here
make[3]: *** [drivers/net/ethernet/intel/built-in.o] Error 1
make[2]: *** [drivers/net/ethernet/intel] Error 2
make[1]: *** [drivers/net/ethernet/] Error 2
make: *** [sub-make] Error 2
Fix this by renaming the i40evf version of this structure from
i40e_ptype_lookup to i40evf_ptype_lookup.
This build failure was introduced in:
commit 206812b5fc
Author: Jesse Brandeburg <jesse.brandeburg@intel.com>
i40e/i40evf: i40e implementation for skb_set_hash
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Eric W Biederman <ebiederm@xmission.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit 2800209994 (e1000e: Refactor PM flows) changed the
SET_SYSTEM_SLEEP_PM_OPS to open-coded assignment, but forgot to
protect them with CONFIG_PM_SLEEP. Then cause the following build
error when PM is disabled:
drivers/net/ethernet/intel/e1000e/netdev.c:7079:13:
error: 'e1000e_pm_suspend' undeclared here (not in a function)
.suspend = e1000e_pm_suspend,
^
drivers/net/ethernet/intel/e1000e/netdev.c:7080:13:
error: 'e1000e_pm_resume' undeclared here (not in a function)
.resume = e1000e_pm_resume,
^
drivers/net/ethernet/intel/e1000e/netdev.c:7082:11:
error: 'e1000e_pm_thaw' undeclared here (not in a function)
.thaw = e1000e_pm_thaw,
^
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Command line parameters QueuePairs, Node, EEE, DMAC and InterruptThrottleRate
do not exist these days. Remove all references to them in the Documentation
folder and update code comments.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pairing process initiated through mgmt sets the conn->auth_type
value regardless of BR/EDR or LE pairing. This value will contain the
MITM flag if the local IO capability allows it. When sending the SMP
pairing request we should check the value and ensure that the MITM bit
gets correctly set in the bonding flags.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The SMP specification is written with the assumption that both key
information, plaintextData and encryptedData follow the same little
endian byte ordering as the rest of SMP.
Since the kernel crypto routines expect big endian data the code has had
to do various byte swapping tricks to make the behavior as expected,
however the swapping has been scattered all around the place.
This patch centralizes the byte order swapping into the smp_e function
by making its public interface match what the other SMP functions expect
as per specification. The benefit is vastly simplified calls to smp_e.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
To make it possible to (correctly) pass data declared as const as the
src parameter to the swap56 and swap128 functions declare this parameter
also as const.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch clean-up comment-line style in r8180_rtl8225.h as the
CodingStyle recommends.
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete all commented code and whitelines in
ieee80211/ieee80211_crypt_wep.c that are not necessary.
Fix sparse warnings:
ERROR: do not use C99 // comments
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use min_t instead of min function in ieee80211/ieee80211_wx.c
Fix sparse warnings:
WARNING: min() should probably be min_t(u8, network->ssid_len, 32)
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use ether_addr_copy instead of memcpy function for fast copy an
Ethernet address in ieee80211/ieee80211_wx.c
Fixes sparse warnings:
WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet addresses are __aligned(2)
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert from printk functions into netdev_err or netdev_info.
Fix checkpatch.pl warning:
WARNING: printk() should include KERN_ facility level
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix indent in switch statement in ieee80211/ieee80211_wx.c.
Fix checkpatch.pl error:
ERROR: switch and case should be at the same indent.
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix commend line in ieee80211/ieee80211_wx.c as the codingStyle of the
kernel recommends.
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete all commented code in ieee80211/ieee80211_wx.c
that are not necessary.
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch solves the sparse warning: "symbol 'ieee80211_ccmp_aes_encrypt' was
not declared. Should it be static?"
Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following sparse warning in r8180_core.c - warning:
restricted __le16 degrades to integer. Also, the variable morefrag is
changed to bool as it is being used as a bool.
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Reviewed-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes these errors and warning messages found by
checkpatch.pl:
ERROR: return is not a function, parentheses are not required.
WARNING: space prohibited before semicolon.
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patch fixes the following checkpatch.pl warnings:
WARNING: Unnecessary space after function pointer name.
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes following smatch warnings:
/drivers/staging/iio/light/tsl2583.c:436 taos_chip_on() info: why not propagate 'ret' from i2c_smbus_write_byte_data() instead of (-1)?
/drivers/staging/iio/light/tsl2583.c:448 taos_chip_on() info: why not propagate 'ret' from i2c_smbus_write_byte_data() instead of (-1)?
/drivers/staging/iio/light/tsl2583.c:461 taos_chip_on() info: why not propagate 'ret' from i2c_smbus_write_byte_data() instead of (-1)?
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steffen Klassert says:
====================
1) Fix a sleep in atomic when pfkey_sadb2xfrm_user_sec_ctx()
is called from pfkey_compile_policy().
Fix from Nikolay Aleksandrov.
2) security_xfrm_policy_alloc() can be called in process and atomic
context. Add an argument to let the callers choose the appropriate
way. Fix from Nikolay Aleksandrov.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When registering a new irqfd, we call its ->poll method to collect any
event that might have previously been pending so that we can trigger it.
This is done under the kvm->irqfds.lock, which means the eventfd's ctx
lock is taken under it.
However, if we get a POLLHUP in irqfd_wakeup, we will be called with the
ctx lock held before getting the irqfds.lock to deactivate the irqfd,
causing lockdep to complain.
Calling the ->poll method does not really need the irqfds.lock, so let's
just move it after we've given up the irqfds.lock in kvm_irqfd_assign().
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With CODEC to CODEC links rtd->codec does not necessarily point to the driver's
CODEC. CODEC drivers should always use dai->codec and never even look at the PCM
runtime.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Silences the following type of checkpatch warning:
WARNING: Missing a blank line after declarations
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Silences the following type of checkpatch warning:
WARNING: Missing a blank line after declarations
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Silences the following type of error/warnings:
ERROR: that open brace { should be on the previous line
WARNING: Missing a blank line after declarations
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
regmap deploys the spinlock for the protection when set up in fast_io
mode. This may lead to sleep-in-atomic by memory allocation with
GFP_KERNEL in regmap_bulk_write(). This patch fixes it by moving the
allocation out of the lock.
[Fix excessively large locked region -- broonie]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
With fast_io we use mutexes to lock the I/O operations so we would need
to do GFP_ATOMIC allocations if we wanted to do allocations inside the
lock as we do currently. Since it is unlikely that we will want to register
a patch outside of init where concurrency shouldn't be an issue move the
allocation of the patch data outside the lock.
Reported-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
The kfree call is not necessary, but we need to call snd_soc_unregister_codec()
in remove().
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Both 5102 and 8997 have the regulator capable of supplying 1.8V, and the
voltage step from the 5110 regulator is different from what is specified
in the default description. This patch updates the default regulator
description to match 5110 and selects the 1.8V capable description for
8997.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
Added initial binding documentation for S2MPA01 MFD.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add support for S2MPA01 voltage and current regulator.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add the necessary entries required for S2MPA01 multi-function
device. While at it also convert whitespaces to tabs in core.h.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
