In order to debug the firmware, we need to be able to set
the BT priority of WiFi packets. This priority is set based
on the type of the packet (control frames, EAPOL etc...).
For debugging purposes, allow to override this priority by
a debugfs controlled value.
Enable this feature that needs this priority to be able to
test it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
When the firmware asserts, the driver will dump the firmware
state to an internal buffer. This buffer is kept aside until
it is dumped through debugfs. Once an external application
fetched the data, the buffer is freed and a new buffer can
be allocated in case another assert occurs.
A udev event is sent to trigger an external application.
A simple rule like:
DRIVER=="iwlwifi", ACTION=="change", RUN+="/sbin/dump_sram.sh"
can fetch the data from debugfs.
Here is my dump_sram.sh:
phyname=$(basename ${DEVPATH})
date=$(date +%F_%H_%M)
filename=/var/log/iwl-sram-${phyname}-${date}.bin
cat /sys/kernel/debug/ieee80211/${phyname}/iwlwifi/iwlmvm/fw_error_dump > ${filename}
The current SRAM size is 80KB so, currently:
$ ls -lh iwl-sram-phy0-2014-03-16_13_14.bin
-rw-r--r-- 1 emmanuel emmanuel 81K Mar 16 13:15 iwl-sram-phy0-2014-03-16_13_14.bin
and after compression:
$ ls -lh iwl-sram-phy0-2014-03-16_13_14.bin.xz
-rw-r--r-- 1 emmanuel emmanuel 13K Mar 16 13:15 iwl-sram-phy0-2014-03-16_13_14.bin.xz
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Make sure iounmap is always called after ioremap when module loading
fails. Also remove a call to release_mem_region because that region is
never reserved in the first place.
Fixes the following issue reported by Coccinelle:
drivers/staging/slicoss/slicoss.c:3727:1-7: ERROR: missing iounmap; ioremap on line 3661 and execution via conditional on line 3677
Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl issues with multiple spaces after return type in
drv_types.h
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl issues with
line over 80 characters in osdep_service.h
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Kconfig symbol ISDN_CAPI_MIDDLEWARE is only used in capi.c. Setting
it without setting ISDN_CAPI_CAPI20 is therefor useless. Make it depend
on ISDN_CAPI_CAPI20 and put its entry after ISDN_CAPI_CAPI20's entry.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix checkpatch.pl issues with line over 80 characters in rtsx_card.c
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl issues with do not add
new typedefs in bp_ioctl.h
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only ratelimit the ones that might spam, omiting the ones from
enslave/deslave.
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Removes needless boolean TRUE and false comparisons and reflows some lines to
eliminate over 80 character if statments.
Signed-off-by: Jade Bilkey <herself@thefumon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleans up a few needless comparisons with booleans and cleans up an
interupt handler to take advantage of earlier bailout shortcircuit.
Signed-off-by: Jade Bilkey <herself@thefumon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch.pl warnings and errors:
ERROR: that open brace { should be on the previous line
+ if (!psIntfAdapter->psInterruptUrb)
+ {
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Cannot allocate interrupt urb");
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Cannot allocate interrupt urb");
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Cannot allocate interrupt urb");
^
WARNING: line over 80 characters
+ psIntfAdapter->ulInterruptData;
WARNING: line over 80 characters
+ sizeof(psIntfAdapter->ulInterruptData);
WARNING: line over 80 characters
+ psIntfAdapter->sIntrIn.int_in_endpointAddr);
WARNING: line over 80 characters
+ psIntfAdapter->psInterruptUrb->transfer_buffer,
WARNING: line over 80 characters
+ psIntfAdapter->psInterruptUrb->transfer_buffer_length,
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Interrupt Interval: %d\n",
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Interrupt Interval: %d\n",
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Interrupt Interval: %d\n",
^
ERROR: that open brace { should be on the previous line
+ if( false == psIntfAdapter->psAdapter->device_removed &&
+ false == psIntfAdapter->psAdapter->bEndPointHalted &&
+ false == psIntfAdapter->bSuspended &&
+ false == psIntfAdapter->bPreparingForBusSuspend &&
+ false == psIntfAdapter->psAdapter->StopAllXaction)
+ {
ERROR: space prohibited after that open parenthesis '('
+ if( false == psIntfAdapter->psAdapter->device_removed &&
ERROR: space required before the open parenthesis '('
+ if( false == psIntfAdapter->psAdapter->device_removed &&
WARNING: line over 80 characters
+ status = usb_submit_urb(psIntfAdapter->psInterruptUrb, GFP_ATOMIC);
ERROR: that open brace { should be on the previous line
+ if (status)
+ {
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Cannot send int urb %d\n", status);
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Cannot send int urb %d\n", status);
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Cannot send int urb %d\n", status);
^
ERROR: that open brace { should be on the previous line
+ if(status == -EPIPE)
+ {
ERROR: space required before the open parenthesis '('
+ if(status == -EPIPE)
WARNING: line over 80 characters
+ psIntfAdapter->psAdapter->bEndPointHalted = TRUE ;
WARNING: space prohibited before semicolon
+ psIntfAdapter->psAdapter->bEndPointHalted = TRUE ;
WARNING: line over 80 characters
+ wake_up(&psIntfAdapter->psAdapter->tx_packet_wait_queue);
Signed-off-by: Jade Bilkey <herself@thefumon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch.pl warnings and errors:
ERROR: switch and case should be at the same indent
+ switch (status) {
[...]
+ case STATUS_SUCCESS:
[...]
+ case -ENOENT :
[...]
+ case -EINPROGRESS:
[...]
+ case -EPIPE:
[...]
+ case -ECONNRESET: //URB got unlinked.
+ case -ESHUTDOWN: // hardware gone. this is the serious problem.
[...]
+ case -ENODEV : //Device got removed
+ case -EINVAL : //Some thing very bad happened with the URB. No description is available.
[...]
+ default:
ERROR: that open brace { should be on the previous line
+ if ( urb->actual_length )
+ {
ERROR: space prohibited after that open parenthesis '('
+ if ( urb->actual_length )
ERROR: space prohibited before that close parenthesis ')'
+ if ( urb->actual_length )
ERROR: that open brace { should be on the previous line
+ if(psIntfAdapter->ulInterruptData[1] & 0xFF)
+ {
ERROR: space required before the open parenthesis '('
+ if(psIntfAdapter->ulInterruptData[1] & 0xFF)
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL, "Got USIM interrupt");
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL, "Got USIM interrupt");
^
ERROR: that open brace { should be on the previous line
+ if(psIntfAdapter->ulInterruptData[1] & 0xFF00)
+ {
ERROR: space required before the open parenthesis '('
+ if(psIntfAdapter->ulInterruptData[1] & 0xFF00)
WARNING: line over 80 characters
+ (psIntfAdapter->ulInterruptData[1] & 0xFF00) >> 8);
WARNING: space prohibited between function name and open parenthesis '('
+ atomic_set (&Adapter->uiMBupdate, TRUE);
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL, "TX mailbox contains %d",
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL, "TX mailbox contains %d",
^
+ atomic_read(&Adapter->CurrNumFreeTxDesc));
ERROR: that open brace { should be on the previous line
+ if(psIntfAdapter->ulInterruptData[1] >> 16)
+ {
ERROR: space required before the open parenthesis '('
+ if(psIntfAdapter->ulInterruptData[1] >> 16)
ERROR: spaces required around that '=' (ctx:VxE)
+ Adapter->CurrNumRecvDescs=
^
WARNING: line over 80 characters
+ (psIntfAdapter->ulInterruptData[1] >> 16);
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"RX mailbox contains %d",
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"RX mailbox contains %d",
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"RX mailbox contains %d",
^
ERROR: that open brace { should be on the previous line
+ if(Adapter->fw_download_done &&
+ !Adapter->downloadDDR &&
+ atomic_read(&Adapter->CurrNumFreeTxDesc))
+ {
ERROR: space required before the open parenthesis '('
+ if(Adapter->fw_download_done &&
ERROR: spaces required around that '+=' (ctx:WxV)
+ psIntfAdapter->psAdapter->downloadDDR +=1;
^
ERROR: that open brace { should be on the previous line
+ if(false == Adapter->waiting_to_fw_download_done)
+ {
ERROR: space required before the open parenthesis '('
+ if(false == Adapter->waiting_to_fw_download_done)
ERROR: that open brace { should be on the previous line
+ if(!atomic_read(&Adapter->TxPktAvail))
+ {
ERROR: space required before the open parenthesis '('
+ if(!atomic_read(&Adapter->TxPktAvail))
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Firing interrupt in URB");
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Firing interrupt in URB");
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Firing interrupt in URB");
^
ERROR: space prohibited before that ':' (ctx:WxE)
+ case -ENOENT :
^
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"URB has got disconnected ....");
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"URB has got disconnected ....");
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"URB has got disconnected ....");
^
WARNING: space prohibited before semicolon
+ return ;
WARNING: line over 80 characters
+ //This situation may happened when URBunlink is used. for detail check usb_unlink_urb documentation.
ERROR: do not use C99 // comments
+ //This situation may happened when URBunlink is used. for detail check usb_unlink_urb documentation.
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Impossibe condition has occurred... something very bad is going on");
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Impossibe condition has occurred... something very bad is going on");
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Impossibe condition has occurred... something very bad is going on");
^
WARNING: space prohibited before semicolon
+ break ;
ERROR: do not use C99 // comments
+ //return;
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Interrupt IN endPoint has got halted/stalled...need to clear this");
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Interrupt IN endPoint has got halted/stalled...need to clear this");
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Interrupt IN endPoint has got halted/stalled...need to clear this");
^
WARNING: space prohibited before semicolon
+ Adapter->bEndPointHalted = TRUE ;
WARNING: space prohibited before semicolon
+ urb->status = STATUS_SUCCESS ;
ERROR: do not use C99 // comments
+ case -ECONNRESET: //URB got unlinked.
WARNING: line over 80 characters
+ case -ESHUTDOWN: // hardware gone. this is the serious problem.
ERROR: do not use C99 // comments
+ case -ESHUTDOWN: // hardware gone. this is the serious problem.
WARNING: line over 80 characters
+ //Occurs only when something happens with the host controller device
ERROR: code indent should use tabs where possible
+^I ^I^I^I^I^I^I//Occurs only when something happens with the host controller device$
WARNING: please, no space before tabs
+^I ^I^I^I^I^I^I//Occurs only when something happens with the host controller device$
ERROR: do not use C99 // comments
+ //Occurs only when something happens with the host controller device
ERROR: do not use C99 // comments
+ case -ENODEV : //Device got removed
ERROR: space prohibited before that ':' (ctx:WxW)
+ case -ENODEV : //Device got removed
^
WARNING: line over 80 characters
+ case -EINVAL : //Some thing very bad happened with the URB. No description is available.
ERROR: do not use C99 // comments
+ case -EINVAL : //Some thing very bad happened with the URB. No description is available.
ERROR: space prohibited before that ':' (ctx:WxW)
+ case -EINVAL : //Some thing very bad happened with the URB. No description is available.
^
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"interrupt urb error %d", status);
ERROR: code indent should use tabs where possible
+^I ^IBCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"interrupt urb error %d", status);$
WARNING: please, no space before tabs
+^I ^IBCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"interrupt urb error %d", status);$
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"interrupt urb error %d", status);
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"interrupt urb error %d", status);
^
WARNING: space prohibited before semicolon
+ urb->status = STATUS_SUCCESS ;
WARNING: space prohibited before semicolon
+ break ;
ERROR: do not use C99 // comments
+ //return;
ERROR: spaces required around that ':' (ctx:VxE)
+ default:
^
WARNING: line over 80 characters
+ //This is required to check what is the defaults conditions when it occurs..
ERROR: do not use C99 // comments
+ //This is required to check what is the defaults conditions when it occurs..
WARNING: line over 80 characters
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL,"GOT DEFAULT INTERRUPT URB STATUS :%d..Please Analyze it...", status);
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL,"GOT DEFAULT INTERRUPT URB STATUS :%d..Please Analyze it...", status);
^
ERROR: space required after that ',' (ctx:VxV)
+ BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL,"GOT DEFAULT INTERRUPT URB STATUS :%d..Please Analyze it...", status);
^
Signed-off-by: Jade Bilkey <herself@thefumon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch.pl warnings and errors and removes some dead code.
Checkpath warnings and errors fixed:
WARNING: line over 80 characters
WARNING: space prohibited before semicolon
ERROR: that open brace { should be on the previous line
ERROR: space required before the open parenthesis '('
ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: Jade Bilkey <herself@thefumon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch errors:
ERROR: space prohibited after that '&' (ctx:WxW)
+ memcpy((PVOID) & pstHostMibs->
^
ERROR: space prohibited after that '&' (ctx:WxW)
+ (PVOID) & Adapter->
^
ERROR: space prohibited after that '&' (ctx:WxW)
+ memcpy((PVOID) & pstHostMibs->astSFtable[nSfIndex],
^
ERROR: space prohibited after that '&' (ctx:WxW)
+ (PVOID) & Adapter->PackInfo[nSfIndex],
^
Signed-off-by: Jade Bilkey <herself@thefumon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Armada 370 DB board not only has analog audio input/output, but
also S/PDIF input/output. This commit adds support for S/PDIF in the
ASoC machine driver of the Armada 370 DB platform, and adjusts the
Device Tree bindings documentation accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Fix checkpatch.pl issues with printk() should include
KERN_ facility level in wb35rx.c
Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl issues with line over 80 characters in imx-hdmi.c
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl issues with line over 80 characters in imx-ldb.c
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove checking control_reg in [set|get]_voltage_sel and then convert to use
regulator_[set|get]_voltage_sel_regmap for [set|get]_voltage_sel callbacks.
The anatop-reg-offset property is a required property rather than optional
property. So the question is what is the meaning of setting anatop-reg-offset
to 0? If 0 is a valid setting for anatop-reg-offset and it has special meaning,
we had better document it in the binding document. Otherwise, remove the testing
for control_reg in the driver.
No anatop voltage regulator node in the dts files set anatop-reg-offset to 0.
So I think it's safe to remove testing if control_reg is 0.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
This patch fixes following checkpatch.pl warning:
WARNING: unchecked sscanf value in gdm_lte.c
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=uZp5
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull another kvm fix from Paolo Bonzini:
"A fix for a PowerPC bug that was introduced during the 3.14 merge
window"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: PPC: Book3S HV: Fix register usage when loading/saving VRSAVE
KVM: PPC: Book3S HV: Remove bogus duplicate code
Fix checkpatch.pl issues with no space before tabs in base.c
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl issues with quoted string split across lines in base.c
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl issues with space required before the open parenthesis
'(' error in base.c
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl issues with do not use C99 // comments in base.c
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl issues with unnecessary whitespace before a quoted
newline in base.c
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl issues with code indent should use tabs where possible in base.c
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl issues with line over 80
characters in serqt_usb2.c
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit b4e9b520ca ("[NET_SCHED]: Add mask support to fwmark
classifier") Patrick added an u32 field in fw_head, making it slightly
bigger than one page.
Lets use 256 slots to make fw_hash() more straight forward, and move
@mask to the beginning of the structure as we often use a small number
of skb->mark. @mask and first hash buckets share the same cache line.
This brings back the memory usage to less than 4000 bytes, and permits
John to add a rcu_head at the end of the structure later without any
worry.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: John Fastabend <john.fastabend@gmail.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following sparse warning:
drivers/staging/wlags49_h2/wl_netdev.c:533:6: warning: symbol 'wl_poll'
was not declared. Should it be static?
Signed-off-by: Jelena Bjelja <jelena.bjelja.ing@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert from printk functions into netdev_err or netdev_info in
ieee80211/dot11d.c
Fix checkpatch.pl warning:
WARNING: printk() should include KERN_ facility level
WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move export_symbol below its function in ieee80211/dot11d.c
Fix checkpatch.pl warning:
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove innecessary spaces and indentation errors in function definition
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add whitespace in ieee80211/dot11d.c and fix coding style these lines
when It is necessary
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete unnecesary braces and fix coding style these lines when It is
necessary in ieee80211/dot11d.c
Fix checkpatch.pl errors:
WARNING: braces {} are not necessary for single statement blocks
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move open brace on the previous line and fix coding style in
these lines when It is necessary in ieee80211/dot11d.c
Fix checkpatch.pl errors:
ERROR: that open brace { should be on the previous line
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert style of comments from C99-style to C89 and fix coding style in
these lines when It is necessary.
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete all commented code in ieee80211/dot11d.c that are not necessary.
Signed-off-by: Ana Rey <anarey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steffen Klassert says:
====================
One patch to rename a newly introduced struct. The rest is
the rework of the IPsec virtual tunnel interface for ipv6 to
support inter address family tunneling and namespace crossing.
1) Rename the newly introduced struct xfrm_filter to avoid a
conflict with iproute2. From Nicolas Dichtel.
2) Introduce xfrm_input_afinfo to access the address family
dependent tunnel callback functions properly.
3) Add and use a IPsec protocol multiplexer for ipv6.
4) Remove dst_entry caching. vti can lookup multiple different
dst entries, dependent of the configured xfrm states. Therefore
it does not make to cache a dst_entry.
5) Remove caching of flow informations. vti6 does not use the the
tunnel endpoint addresses to do route and xfrm lookups.
6) Update the vti6 to use its own receive hook.
7) Remove the now unused xfrm_tunnel_notifier. This was used from vti
and is replaced by the IPsec protocol multiplexer hooks.
8) Support inter address family tunneling for vti6.
9) Check if the tunnel endpoints of the xfrm state and the vti interface
are matching and return an error otherwise.
10) Enable namespace crossing for vti devices.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes use of explicit extern specifier and quietens the
sparse warnings:
drivers/staging/rtl8192u/r8192U_dm.c:159:1: warning: function 'init_hal_dm' with external linkage has definition
drivers/staging/rtl8192u/r8192U_dm.c:179:13: warning: function 'deinit_hal_dm' with external linkage has definition
drivers/staging/rtl8192u/r8192U_dm.c:245:17: warning: function 'hal_dm_watchdog' with external linkage has definition
drivers/staging/rtl8192u/r8192U_dm.c:278:13: warning: function 'init_rate_adaptive' with external linkage has definition
drivers/staging/rtl8192u/r8192U_dm.c:878:17: warning: function 'dm_txpower_trackingcallback' with external linkage has definition
drivers/staging/rtl8192u/r8192U_dm.c:1609:13: warning: function 'dm_cck_txpower_adjust' with external linkage has definition
drivers/staging/rtl8192u/r8192U_dm.c:1776:13: warning: function 'dm_change_dynamic_initgain_thresh' with external linkage has definition
drivers/staging/rtl8192u/r8192U_dm.c:1846:1: warning: function 'dm_change_fsync_setting' with external linkage has definition
drivers/staging/rtl8192u/r8192U_dm.c:1863:1: warning: function 'dm_change_rxpath_selection_setting' with external linkage has definition
drivers/staging/rtl8192u/r8192U_dm.c:2543:13: warning: function 'dm_init_edca_turbo' with external linkage has definition
drivers/staging/rtl8192u/r8192U_dm.c:2663:13: warning: function 'DM_CTSToSelfSetting' with external linkage has definition
drivers/staging/rtl8192u/r8192U_dm.c:2782:17: warning: function 'dm_rf_pathcheck_workitemcallback' with external linkage has definition
drivers/staging/rtl8192u/r8192U_dm.c:3142:13: warning: function 'dm_fsync_timer_callback' with external linkage has definition
drivers/staging/rtl8192u/r8192U_dm.c:3481:13: warning: function 'dm_shadow_init' with external linkage has definition
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
