When CONFIG_DEBUG_PAGEALLOC is set page table updates made by
kernel_map_pages() are not made visible (via TLB flush)
immediately if lazy MMU is on. In environments that support lazy
MMU (e.g. Xen) this may lead to fatal page faults, for example,
when zap_pte_range() needs to allocate pages in
__tlb_remove_page() -> tlb_next_batch().
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: konrad.wilk@oracle.com
Link: http://lkml.kernel.org/r/1365703192-2089-1-git-send-email-boris.ostrovsky@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If the pmd is not present, _PAGE_PSE will not be set anymore.
Fix the false positive.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Stefan Bader <stefan.bader@canonical.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1365687369-30802-1-git-send-email-aarcange@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Driver's and ->fill_modes functions are allowed to grab crtc mutexes
(for e.g. load detect). Hence we need to first only grab the general
kms mutex, and only in a second step grab all locks to do the
modesets.
This prevents a deadlock on my gm45 in the tv load detect code called
by drm_helper_probe_single_connector_modes.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pull slave-dmaengine fixes from Vinod Koul:
"The first one fixes issue in pl330 to check for DT compatible and
the second one fixes omap-dma to start without delay"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: omap-dma: Start DMA without delay for cyclic channels
DMA: PL330: Add check if device tree compatible
- System reboot/halt fix related to CPU offline ordering
from Huacai Chen.
- intel_pstate driver fix for a delay time computation error
occasionally crashing systems using it from Dirk Brandewie.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=bkFT
-----END PGP SIGNATURE-----
Merge tag 'pm-3.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
- System reboot/halt fix related to CPU offline ordering from Huacai
Chen.
- intel_pstate driver fix for a delay time computation error
occasionally crashing systems using it from Dirk Brandewie.
* tag 'pm-3.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / reboot: call syscore_shutdown() after disable_nonboot_cpus()
cpufreq / intel_pstate: Set timer timeout correctly
This reverts commit bc8ce4 (regmap: don't corrupt work buffer in
_regmap_raw_write()) since it turns out that it can cause issues when
taken in isolation from the other changes in -next that lead to its
discovery. On the basis that nobody noticed the problems for quite some
time without that subsequent work let's drop it from v3.9.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=ROA6
-----END PGP SIGNATURE-----
Merge tag 'regmap-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap revert from Mark Brown:
"regmap: Back out work buffer fix
This reverts commit bc8ce4 (regmap: don't corrupt work buffer in
_regmap_raw_write()) since it turns out that it can cause issues when
taken in isolation from the other changes in -next that lead to its
discovery. On the basis that nobody noticed the problems for quite
some time without that subsequent work let's drop it from v3.9."
* tag 'regmap-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Back out work buffer fix
Some important bug fixes that came in over the last 10 days,
mostly mvebu and imx:
- Multiple regressions on i.mx following the conversion of
the clock code, hopefully the last we are seeing of those.
- a regression in the mvebu irq handling code
- An incorrect register offset in the rewritten s3c24xx irq code.
- Two bugs in setting up the iomega_ix2_200 machine
- Turning on an extra bus clock on imx
- A MAINTAINERS file entry for Roland Stigge
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=J404
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC bug fixes from Arnd Bergmann:
"A little later during the week than the last few pull requests, since
there was very little that came in before 3.9-rc6. At least things
have calmed down again here.
Some important bug fixes that came in over the last 10 days, mostly
mvebu and imx:
- Multiple regressions on i.mx following the conversion of the clock
code, hopefully the last we are seeing of those.
- a regression in the mvebu irq handling code
- An incorrect register offset in the rewritten s3c24xx irq code.
- Two bugs in setting up the iomega_ix2_200 machine
- Turning on an extra bus clock on imx
- A MAINTAINERS file entry for Roland Stigge"
* tag 'arm-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm: mvebu: Fix the irq map function in SMP mode
Fix GE0/GE1 init on ix2-200 as GE0 has no PHY
ARM: S3C24XX: Fix interrupt pending register offset of the EINT controller
ARM: S3C24XX: Correct NR_IRQS definition for s3c2440
ARM i.MX6: Fix ldb_di clock selection
ARM: imx: provide twd clock lookup from device tree
ARM: imx35 Bugfix admux clock
ARM: clk-imx35: Bugfix iomux clock
ARM: mxs: Slow down the I2C clock speed
MAINTAINERS: Add maintainer for LPC32xx
ARM: Kirkwood: Fix typo in the definition of ix2-200 rebuild LED
If a TCP retransmission gets partially ACKed and collapsed multiple
times it is possible for the headroom to grow beyond 64K which will
overflow the 16bit skb->csum_start which is based on the start of
the headroom. It has been observed rarely in the wild with IPoIB due
to the 64K MTU.
Verify if the acking and collapsing resulted in a headroom exceeding
what csum_start can cover and reallocate the headroom if so.
A big thank you to Jim Foraker <foraker1@llnl.gov> and the team at
LLNL for helping out with the investigation and testing.
Reported-by: Jim Foraker <foraker1@llnl.gov>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The definitions have moved to include/linux/usb/samsung-usb-phy.h,
and plat/usb-phy.h is unavailable from drivers in a multiplatform
configuration.
Also fix up the plat/usb-phy.h header file to use the definitions
from the new header instead of providing a separate copy.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dereference to 'put_index' should be moved below the NULL test.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Before, it was a function that would set all members of a given struct
containing only int members to -1. Now, it is renamed to
dwc_set_all_params and it works only on the dwc2_core_params struct.
This makes sure that all of the slightly dubious casting and assumptions
happen inside the function instead of by the caller.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously, it was "dwc_otg", but this does not correspond to the
directory name and might cause confusion with the old out-of-tree
dwc_otg driver of which many versions circulate.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Designware UART has an optional support for 16750
compatible Auto Flow Control. This will enable it based on
the AFCE bit in Component Parameter Register.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The new ACPI DMA helpers in dmaengine API can take care of
extracting all the necessary information regarding DMA. The
driver does not need to do this separately any more.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Lynxpoint LPSS peripheral clocks are now handled in clk
framework so the drivers do not need to take care of them
manually. In dw8250_probe_acpi(), the uartclk is now taken
from the driver_data only if it was not already set.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This allows ACPI to put the device to D3 when it's not used.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some slave channel parameters will be always the same. For
example, direction for the Rx channel will always be
DMA_DEV_TO_MEM and DMA_MEM_TO_DEV for Tx channel.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The helper functions in dmaengine API allow the drivers to
request slave channels without the filter parameters. They
will attempt to extract the needed DMA client information
from DT or ACPI, but if such information is not available
the filter parameters can still be used.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Overrun, parity and framing errors should be handled in
8250_core. This also adds check for the dma_status and exits
if the channel is not idle.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing one unneeded uart_write_wakeup(). There is no need
to start PIO transfer unless DMA fails, so this also changes
serial8250_tx_dma() to return 0 unless that is the case.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a few bugs in the samsung serial driver when built as a
loadable module, which makes the console code unavailable, as well as
giving no access to the 'printascii' early debug function. This adds
the appropriate compile time conditionals.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The registers for the Samsung S3C serial port are currently defined in
the platform specific arch/arm/plat-samsung/include/plat/regs-serial.h
file, which is not visible to multiplatform capable drivers.
Unfortunately, it is not possible to move the file into a more local
place as we should normally try to, because the same registers
may be used in one of four places:
* In the driver itself
* In platform-independent ARM code for early debug output
* In platform_data definitions
* In the Samsung platform power management code
I have also found no way to logically split out a platform_data
file, other than possibly move everything into
include/linux/platform_data, which also felt wrong. The only
part of this file that makes sense to keep specific to the s3c24xx
platform are the virtual and physical addresses defined here,
which are needed in no other location.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the common clock interface, there is no way to provide the
"clock_source" sysfs attribute for the samsung serial ports. Given that
this file was purely informational and had fixed contents, we have reason
to believe that no user space programs were relying on it.
The sysfs file is not documented in the ABI docs.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The work item has been added to the queue using INIT_WORK and scheduled
in interrupt handler. when module unloads that work item has not been
removed from the queue. remove and stop its further execution when the
module unloaded
Cc: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the DesignWare MAC is synthesised with MMC RX IPC Counter, an unmanaged
and unacknowledged interrupt is generated after some time of operation.
This patch masks the undesired interrupts.
Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch enables these functions to be wrapped and
can disable/enable this with CONFIG_DEBUG_FS.
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch enables these functions to be wrapped and can disable/enable
this with CONFIG_DEBUG_FS.
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While enslaving a new device and after IFF_BONDING flag is set, in case
of failure it is not stripped from the device's priv_flags while
cleaning up, which could lead to other problems.
Cleaning at err_close because the flag is set after dev_open().
v2: no change
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 471cb5a33d ("bonding: remove
usage of dev->master") a bug was introduced which causes a NULL pointer
dereference. If a bond device is in mode 6 (ALB) and a slave is added
it will dereference a NULL pointer in bond_slave_netdev_event().
This is because in bond_enslave we have bond_alb_init_slave() which
changes the MAC address of the slave and causes a NETDEV_CHANGEADDR.
Then we have in bond_slave_netdev_event():
struct slave *slave = bond_slave_get_rtnl(slave_dev);
struct bonding *bond = slave->bond;
bond_slave_get_rtnl() dereferences slave_dev->rx_handler_data which at
that time is NULL since netdev_rx_handler_register() is called later.
This is fixed by checking if slave is NULL before dereferencing it.
v2: Comment style changed.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a bug in cookie_v4_check (net/ipv4/syncookies.c):
flowi4_init_output(&fl4, 0, sk->sk_mark, RT_CONN_FLAGS(sk),
RT_SCOPE_UNIVERSE, IPPROTO_TCP,
inet_sk_flowi_flags(sk),
(opt && opt->srr) ? opt->faddr : ireq->rmt_addr,
ireq->loc_addr, th->source, th->dest);
Here we do not respect sk->sk_bound_dev_if, therefore wrong dst_entry may be
taken. This dst_entry is used by new socket (get_cookie_sock ->
tcp_v4_syn_recv_sock), so its packets may take the wrong path.
Signed-off-by: Dmitry Popov <dp@highloadlab.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before, this was initialized in pci.c, after the dwc2_hcd_init was
called and the interrupts were enabled. This opened up a small time
window where common interrupts could be triggered, but there was no
handler for them, causing them to keep triggering infinitely and locking
up the machine.
On my RT3052 board this bug could be easily reproduced by hardcoding
the console log level to 8, so that a bunch of debug output from the dwc2
driver was generated inside this time window. This caused the interrupt
lockup to occur almost every time.
By requesting the irq inside dwc2_core_init and by disabling interrupts
before calling dwc2_core_init instead of after, we can be sure the
handler is registered before the interrupts are enabled, which should
close this window.
Reported-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It seems this flag is intended to pass to irq_set_status_flags, not
request_irq, and is not available on all architectures. Its value
corresponds to IRQF_PROBE_SHARED, which shouldn't be needed for this
driver, so removing this flag should be safe.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zero-filled pages won't be compressed and sent to remote system. Monitor
the number ephemeral and persistent pages that Ramster has sent make no
sense. This patch skip account foregin counters against zero-filled pages.
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One of the main things to do to the driver is to support
the common display famework (CDF) to hit mainline. As this will
make some changes to the devicetree bindings necessary it makes
sense to do it before we move out of staging.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This comment about using ioremap() for 2.4 kernels is not necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The i_IorangeBase0 boardinfo is not used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The i_IorangeBase2 boardinfo is not used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When it is used, the entire PCI bar is ioremap'ed with pci_ioremap_bar().
The i_IorangeBase3 boardinfo is no longer needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.
This also makes sure that the entire PCI bar is ioremap'ed instead
of assuming the size of the bar.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.
This also makes sure that the entire PCI bar is ioremap'ed instead
of assuming the size of the bar.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.
This also makes sure that the entire PCI bar is ioremap'ed instead
of assuming the size of a bar.
For aesthetic reasons, don't set the private data phys_addr vars
until after the ioremap is successful.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.
This also makes sure that the entire PCI bar is ioremap'ed instead
of assuming the size of the bar.
Also, since this driver only uses memory mapped I/O it is not
necessary to set the dev->iobase.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.
Refactor the code a bit. The dev->iobase only needs to be set
when the board does not use memory mapped I/O. And the 'iobase'
passed to subdev_8255_init() is an unsigned long.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.
This also makes sure that the entire PCI bar is ioremap'ed instead
of assuming the size of the bar.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver does not use the dev->iobase so don't bother initializing
it.
The plx9080_phys_iobase is not used in the driver. Remove it from the
private data.
Tidy up the initialization of the other phy_iobase variables.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
