Not yet using the new APIs, but ready to. Still to do:
- Send sync messages on trust decisions
- Respond to received trust decision sync messages
- Show trust decisions in the conversation history
- In that rare situation where a sent message ends up with a key error
make it easy to retry the send.
FREEBIE
Also:
- All the necessary wire-up to update things in real time. If you have
a safety number page up via a group member view as well as via a 1:1
conversation with that contact, they'll both be updated as the
underlying model changes. Similarly, the overall group will update
in real-time as members change.
- A bit of special-casing for yourself in a group conversation - you're
shown as 'me' and are not clickable, where normally that would take you
to the Safety Number screen for that contact. You are also not included
in the trust calculations for a given group.
FREEBIE
Because we only attach AttachmentViews to the DOM when they fire their
'update' event, we were subject to a race condition. If that event fired
after the final Message.render(), then it would be properly attached to
the final DOM node. If it fired early, it would end up missing from
the visible DOM entirely, attached to the old, discarded version of
the message.
This change updates our handling of a second call to loadAttachments().
Instead of bailing out if we've been called before, we attempt to
re-add our child AttachmentViews to the current DOM. But only if the
'update' event has been fired, and if their current parent node is not
what is in the DOM.
FREEBIE
To handle the same 'not quite at the bottom' case that our 30px buffer
gives us for marking messages read, we use the same atBottom() method to
determine whether we should mark everything unread. Saves the effort and
potential missed messages (due to partial pixels, etc.).
FREEBIE
- initialize doesn't need to call update because
MessageView.renderExpiring() calls it immediately
- we don't need the className because that's already present on
the el it attaches to, part of the MessageView's template.
FREEBIE
- Only mark messages read when scrolling if in focus and visible
- Remove last seen indicator when scrolling to the bottom with scroll
down button
- Update last seen indicator when we don't already have one and we're
scrolled up.
FREEBIE
It can be moved if you're not scrolled to the bottom of of the window
or the window doesn't have focus when a new message comes in. Other than
that, it marches up the window until you close and reopen the
conversation, or send a message.
Note that we do NOT mark messages as read if they come in when you are
scrolled up. But we do mark the entire conversation as read if you
switch away from the app and back.
FREEBIE
Re-renders happen when we re-fetch messages from the database, and our
previous technique for loading attachments resulted in a new attachment
view added for every call to render()
This change ensures that a second call to render() does not add any more
attachment views.
FREEBIE
* Remove increment behavior
* Dismiss when new messages arrive but the window is focused
* Update the indicator when window becomes focused.
// FREEBIE
This is to ensure that when there are a lot of unread messages, the user
is given the chance to see all of them by being scrolled to the oldest
new message.
When a new message comes in, the indicator will be incremented.
When the user sends a message or switches away from the conversation,
the last seen indicator will be removed.
FREEBIE
Add names and sizes for all attachments except images, and (as with
arbitrary attachments), clicking on the text will open a save dialog.
In the absence of a filename, choose something that makes sense.
Display different icons for different media types, including distinct icons
for voice notes and audio files.
In iOS theme, audio, video, voice, and files are all encapsulated in bubbles.
Closes#804Closes#842Closes#836
// FREEBIE
Sometimes .mov files arrive with content type video/quicktime, but must
be saved to .mov in order for osx to recognize them as videos and open
the appropriate default program, display thumbnails, etc...
// FREEBIE
Make arbitrary files look nicer and display the filename.
If an audio or video element fails to load for any reason, timeout after
a few seconds and render it as an arbitrary file. Also short circuit to
this treatment for common audio and video file types that we know are
going to fail, e.g., proprietary formats from apple.
// FREEBIE
Let install view manage the connection to the provisioning socket as
well as cleaning up the window on completion, simplifying options.js.
Call `remove` so that the view stops listening when the window closes.
Move view script and template to background page.
Adds ability to hide nav if this isn't our first run.
// FREEBIE
Listen for reconnectTimer to display reconnection info. Listen for
unauthorized to update network status immediately after a failed login,
rather than waiting for the normal 5s interval to time out.
// FREEBIE
When we can't connect due to being unlinked, network status indicator
will show an appropriate informational message and a button to open the
installer window to relink.
// FREEBIE
This makes the "x" in the search bar always visible when there is
text in the search box, even if the mouse is not hovering, hopefully
making for a clearer UI around search and resolving issue #741
The implementation adds the "x.svg" as a background image to the search
box when it is classed with .active, in addition to the
-webkit-search-cancel-button, which is still there for the actual
functionality but only appears on mouse hover (one tiny snag is that
coloring appears slightly different on hover, at least on my screen -
don't know if this is a problem).
I accounted for both ltr and rtl text-direction by using
getComputedStyle(...).direction to detect from the input's dir="auto"
- if there's a more elegant way to do this, please suggest. An ideal
solution would use the :dir pseudo-class but it's not implemented
in Chrome yet - https://developer.mozilla.org/en-US/docs/Web/CSS/:dir
For now, I added the direction-checking to inbox_view.js. I see that
input.search is also used in new_group_update_view.js and
recipient_input_view.js but neither of these views seem to be in use (?)
and they don't set the .active class anyway, so I ignored them.
Update: Amended version a few hours later - fixed and manually tested
color and spacing for iOS and Android Dark themes. Also made some new
SASS variables to make things DRYer and fixed my tab size.
Don't set lastMessage, let it update itself as needed, such as when
first rendering a conversation list item, and when its messages are
sent, received, or destroyed.
There are some cases when we want to initialize a group object without
loading its contacts, such as while processing delivery receipts. We
really only need to load the contacts for a group/convo when we are
rendering it, so let the front end handle those cases (which most of
them do already).
TimestampView's getRelativeTimeSpanString called moment() twice while
calculating the timeout. If there was a minute/hour/day wrap between
these 2 calls, the calculated delay was 0 and thus no timer was
scheduled, since if (this.delay) evaluated to false.
Fixes: #857, #460
// FREEBIE
Usually new elements are inserted in a predictable order relative to the
sort order of the models/collection, but it's not garaunteed. This fixes
up message element insertion to handle the general case where elements
can be added in any order and must be displayed in correct order as
determined by the collection's sort function. In the worst case, we'll
have to iterate over the entire list of elements to find the right spot,
but in practice most of the time we can short circuit based on the index
of the model or by looking for the predecessor or successor of the
element in question.
This breaks the css-purity of our mixin but is necessary in order to
apply the initial offset of the hourglass animation dynamically, since
jquery can't manipulate arbitrary css on psuedo elements.
When initialized, or when expiration-related attributes change, expiring
messages will set timers to self-destruct. On self-destruct they trigger
'expired' events so that frontend listeners can clean up any collections
and views referencing them.
At startup, load all messages pending expiration so they can start their
timers even if they haven't been loaded in the frontend yet.
Todo: Remove expired conversation snippets from the left pane.
Test page loads fixtures and renders the inbox view. This may be useful
for smoke testing style changes or generating screenshots with
pseudo-realistic data.
Includes a couple small changes to get rendering working outside the
app.
Use emojijs for replacing unicode with image tags for display. We were
already using it to replace colons with unicode. Additionally it has
a companion data repo that is kept up to date with images from all
the common image sets.
// FREEBIE
Move away from inline style attributes for setting contact colors.
Apply colors by name via css classes instead. Also lays groundwork
for syncing contact colors.
// FREEBIE
Fix some visual bugs occuring at large font size:
* Contact names break onto the next line after their avatars in
message detail screen
* Settings menu font-size failed to scale
* Handle Content overflow in modals.
// FREEBIE
Let momentjs handle proper pluralization of relative times. This comes
at the sacrifice of displaying 'minutes' in the conversation list
timestamp rather than 'min'. Note that we don't use moment's fromNow
instance method so as to preserve the rounding logic that matches the
Android client.
// FREEBIE
This commit stops the MessageView from adding the attachment more than once. Previously an attachment was appended to the MessageView every time an update
event was emitted, which happens when forwarding.
// FREEBIE
This commit changes the inbox to stop video and audio elements when selecting a new conversation, and to not stop such elements when the same
conversation was selected (fixes#391).
// FREEBIE
Despite the "click to save"-description of unsupported file types, clicking them did not save them.
This commit implements a Save-As dialog instead of opening the file in chrome.
// FREEBIE
Add a section under settings for performing a contact sync from your
mobile device. This just re-runs the same import operation that occurs
at install/link time.
// FREEBIE
* Apply the same rounding to in message bubbles and conversation list.
Also make them consistent with Android's relative times. Fixes#682
* Show full timestamps when hovering on relative time
* Compute timestamp update delays more precisely:
Set timestamps to self-update as soon as they are able to change
rather than a fixed time since the last update.
* Refactor for customizable/localizable relative times
* Update timestamp tests
* Log timestamp update intervals to help debug #460
When deleting all messages in a conversation, the entry in the left pane
should be inserted into the alphabetical portion of the list. To keep it
in this collection, do not nullify active_at.
To ensure the list view is keeping itself correctly sorted, make sure
that resorting behavior is triggered any time a relevant attribute is
changed.
This fixes deleted conversations jumping to the top of the list, and
conversation order scrambling when getting a group or contact sync
message from our master device.
Fixes#734
// FREEBIE
For messages that failed to send due to network errors, this change
allows retrying them directly from the main conversation view rather
than only from the message detail view.
// FREEBIE
The onChangeActiveAt listener promotes newly activated conversations to
the top of the inbox. By firing on an 'add' event, if the conversation
list happened to load after the inbox frontend was initialized, each new
entry would be incorrectly moved to the top, effectively reversing the
list.
// FREEBIE
This flow broke a bit with transition to modal debug log.
Restructure such that the loading class can be applied to an appropriate
element inside the modal. Ensure that the input elements are hidden when
submit is clicked, the result elements are shown when the log upload is
completed.
// FREEBIE
Untangle these two views into their component parts, consolidating all
the key conflict logic in the key conflict view. Contact view now simply
renders basic contact info and miscellaneous errors but not conflicts or
message errors.
// FREEBIE
Network errors render as a resend dialogue at the top of the message
detail and need not be re-reported in the contact list or errors
section.
// FREEBIE
When `millis_since` becomes larger than one week, `delay` becomes
negative and is set to Zero. This causes an infinite loop and therefore
100% CPU usage (single thread).
// FREEBIE
Some basic modifications to the Confirmation Dialog:
* Always attached to <body> regardless of view that called it.
* Always centered horizontally on screen.
* A black semi-transparent overlay is now displayed over everything, and under
the dialog.
* Various other style changes.
fixes#389
// FREEBIE
