Nothing stops us from rendering the inbox in the background page, since
it is no longer a background page at all. TODO: intercept window close
events to hide this window instead of closing it unless the app is quit
explicitly.
// FREEBIE
Because export might take a couple minutes, we now set expectations
that it might take 'several minutes' instead of just 'please wait.'
We also promote 'Install new Signal Desktop' from a text link in the
instructions to a button. This is important on the 'Completed' screen
because it is bigger and to the left of the 'Export Again' button, which
previously drew primary focus on that screen.
Lastly, we also remove the title-specific element of the support link,
so we're resilient to title changes in the future.
FREEBIE
* Add support for backup and restore
This first pass works for all stores except messages, pending some scaling
improvements.
// FREEBIE
* Import of messages and attachments
Properly sanitize filenames. Logging information that will help with
debugging but won't threaten privacy (no contact or group names),
where the on-disk directories have this information to make things
human-readable
FREEBIE
* First fully operational single-action export and import!
FREEBIE
* Add migration export flow
A banner alert leads to a blocking ui for the migration. We close the socket and
wait for incoming messages to drain before starting the export.
FREEBIE
* A number of updates for the export flow
1. We don't immediately pop the directory selection dialog box, instead
showing an explicit 'choose directory' button after explaining what is
about to happen
2. We show a 'submit debug log' button on most steps of the process
3. We handle export errors and encourage the user to double-check their
filesystem then submit their log
4. We are resilient to restarts during the process
5. We handle the user cancelling out of the directory selection dialog
differently from other errors.
6. The export process is now serialized: non-messages, then messages.
7. After successful export, show where the data is on disk
FREEBUE
* Put migration behind a flag
FREEBIE
* Shut down websocket before proceeding with export
FREEBIE
* Add MigrationView to test/index.html to fix test
FREEBIE
* Remove 'Submit Debug Log' button when the export process is complete
FREEBIE
* Create a 'Signal Export' directory below user-chosen dir
This cleans things up a bit so we don't litter the user's target
directory with lots of stuff.
FREEBIE
* Clarify MessageReceiver.drain() method comments
FREEBIE
* A couple updates for clarity - event names, else handling
Also the removal of wait(), which wasn't used anywhere.
FREEBIE
* A number of wording updates for the export flow
FREEBIE
* Export complete: put dir on its own line, make text selectable
FREEBIE
Model operations are vulnerable to exceptions thrown by event handlers.
Because this can interrupt really important data operations, it's better
to let the operation continue and log the error. In all likelihood it's
a view-related problem, and that shouldn't cause any data operation to
fail.
FREEBIE
New experience in the Message Detail view when outgoing identity key
errors happen, matching the Android View.
'View' button is only shown on outgoing key errors right now.
When a contact with an outgoing identity key error is clicked, they are
taken to a view like the popup that comes up on Android: an explanation
of what happened and three options: 'Show Safety Number', 'Send Anyway',
and 'Cancel'
Contacts are now sorted alphabetically, with the set of contacts with
errors coming before the rest.
FREEBIE
The shield matches the Android app's key change notification, and the
clock icon was easy to do and makes it easier to visually distinguish
those items in the conversation history.
FREEBIE
We also show more errors than we used to in the MessageDetail screen
to help make it clear what is happening, and why the user would need to
re-send.
FREEBIE
A good bit of CSS was required to keep the text color changing along
with the text it is nestled within.
Also: took this opportunity to increase the contrast of the number and
verified section right under the contact name in the group members view.
FREEBIE
Not yet using the new APIs, but ready to. Still to do:
- Send sync messages on trust decisions
- Respond to received trust decision sync messages
- Show trust decisions in the conversation history
- In that rare situation where a sent message ends up with a key error
make it easy to retry the send.
FREEBIE
Also:
- All the necessary wire-up to update things in real time. If you have
a safety number page up via a group member view as well as via a 1:1
conversation with that contact, they'll both be updated as the
underlying model changes. Similarly, the overall group will update
in real-time as members change.
- A bit of special-casing for yourself in a group conversation - you're
shown as 'me' and are not clickable, where normally that would take you
to the Safety Number screen for that contact. You are also not included
in the trust calculations for a given group.
FREEBIE
- Last seen indicator now spans the full conversation, with subtle
shadow highlights above and below
- Scrollbars now overlap the content of the conversation, allowing last
seen indicator to touch the right edge of the window.
- The iOS and Android conversation background is now #eee instead of
white, which meant that the outgoing messages (Android) and incoming
messages (iOS) had to be updated for contrast. They now have white
backgrounds.
- Similarly, the scroll down button needed more contrast, and its
background is now white in light themes.
FREEBIE
This is to ensure that when there are a lot of unread messages, the user
is given the chance to see all of them by being scrolled to the oldest
new message.
When a new message comes in, the indicator will be incremented.
When the user sends a message or switches away from the conversation,
the last seen indicator will be removed.
FREEBIE
Add names and sizes for all attachments except images, and (as with
arbitrary attachments), clicking on the text will open a save dialog.
In the absence of a filename, choose something that makes sense.
Display different icons for different media types, including distinct icons
for voice notes and audio files.
In iOS theme, audio, video, voice, and files are all encapsulated in bubbles.
Closes#804Closes#842Closes#836
// FREEBIE
Bind a single listener to keychange events from the storage interface,
which then looks up relevant conversations and adds notices to them,
with tests.
Previously we would need to instantiate a conversation model in order to
start listening to its key change events. In practice this usually
happens at startup but we shouldn't rely on it, and it incurs higher
overhead since it creates a different listener for each conversation.
// FREEBIE
Make arbitrary files look nicer and display the filename.
If an audio or video element fails to load for any reason, timeout after
a few seconds and render it as an arbitrary file. Also short circuit to
this treatment for common audio and video file types that we know are
going to fail, e.g., proprietary formats from apple.
// FREEBIE
Let install view manage the connection to the provisioning socket as
well as cleaning up the window on completion, simplifying options.js.
Call `remove` so that the view stops listening when the window closes.
Move view script and template to background page.
Adds ability to hide nav if this isn't our first run.
// FREEBIE
When we can't connect due to being unlinked, network status indicator
will show an appropriate informational message and a button to open the
installer window to relink.
// FREEBIE
Rotate signed prekey every 48hrs, waiting for online access if
necessary. After a rotation attempt is made, schedule the next run for
48hrs in the future.
We use a timeout to "wake up" and handle the rotation. This timeout gets
set on startup and whenever the next rotation time is changed. For
paranoia's sake, always clear the current timeout before setting the
next one.
Since new registrations necessarily upload new signed keys, we reset the
scheduled time to T+48hrs on `registration_done` events.
// FREEBIE
This breaks the css-purity of our mixin but is necessary in order to
apply the initial offset of the hourglass animation dynamically, since
jquery can't manipulate arbitrary css on psuedo elements.
When initialized, or when expiration-related attributes change, expiring
messages will set timers to self-destruct. On self-destruct they trigger
'expired' events so that frontend listeners can clean up any collections
and views referencing them.
At startup, load all messages pending expiration so they can start their
timers even if they haven't been loaded in the frontend yet.
Todo: Remove expired conversation snippets from the left pane.
Move away from inline style attributes for setting contact colors.
Apply colors by name via css classes instead. Also lays groundwork
for syncing contact colors.
// FREEBIE
Fix some visual bugs occuring at large font size:
* Contact names break onto the next line after their avatars in
message detail screen
* Settings menu font-size failed to scale
* Handle Content overflow in modals.
// FREEBIE
- Fixed text alignment in RTL messages.
- Added support for search box.
- Added support for conversation name.
- Added support for contact name.
- Added support for last message timestamp and last message preview.
//FREEBIE
Add a section under settings for performing a contact sync from your
mobile device. This just re-runs the same import operation that occurs
at install/link time.
// FREEBIE
