* Re-enable libtextsecure unit tests, get passing, run in CI
* Save prekeys optimistically, track confirmed, new clean behavior
* Eliminate potential conflicts when rotating on startup
* Remove last symlink: get libtextsecure tests running on windows
* Log when we get a blocked numbers sync message
* Save three old signed keys in addition to the current active
* Remove the mystery from all the error-related log messages
* Log successful load of signed key - to help debug prekey errors
* removeSignedPreKey: Don't hang or crash in error cases
* Log on top-level unhandled promise rejection
* Remove trailing comma in param list, Electron 1.6 does not like
* Harden top-level error handler for strange object shapes
* Retry failed signed key rotation; start rotation when registered (#1772)
* rotateSignedPrekeys: Fix 'res is not defined' error
* If the server rejects key rotation, don't retry immediately
* Force a signed key rotation on launch of any new version
* Refactor delivery receipt event handler
* Rename the delivery receipt event
For less ambiguity with read receipts.
* Rename synced read event
For less ambiguity with read receipts from other Signal users.
* Add support for incoming receipt messages
Handle ReceiptMessages, which may include encrypted delivery receipts or read
receipts from recipients of our sent messages.
// FREEBIE
* Rename ReadReceipts to ReadSyncs
* Render read messages with blue double checks
* Send read receipts to senders of incoming messages
// FREEBIE
* Move ReadSyncs to their own file
// FREEBIE
* Fixup old comments on read receipts (now read syncs)
And some variable renaming for extra clarity.
// FREEBIE
* Add global setting for read receipts
Don't send read receipt messages unless the setting is enabled.
Don't process read receipts if the setting is disabled.
// FREEBIE
* Sync read receipt setting from mobile
Toggling this setting on your mobile device should sync it to Desktop. When
linking, use the setting in the provisioning message.
// FREEBIE
* Send receipt messages silently
Avoid generating phantom messages on ios
// FREEBIE
* Save recipients on the outgoing message models
For accurate tracking and display of sent/delivered/read state, even if group
membership changes later.
// FREEBIE
* Fix conversation type in profile key update handling
// FREEBIE
* Set recipients on synced sent messages
* Render saved recipients in message detail if available
For older messages, where we did not save the intended set of recipients at the
time of sending, fall back to the current group membership.
// FREEBIE
* Record who has been successfully sent to
// FREEBIE
* Record who a message has been delivered to
* Invert the not-clickable class
* Fix readReceipt setting sync when linking
* Render per recipient sent/delivered/read status
In the message detail view for outgoing messages, render each recipient's
individual sent/delivered/read status with respect to this message, as long as
there are no errors associated with the recipient (ie, safety number changes,
user not registered, etc...) since the error icon is displayed in that case.
*Messages sent before this change may not have per-recipient status lists
and will simply show no status icon.
// FREEBIE
* Add configuration sync request
Send these requests in a one-off fashion when:
1. We have just setup from a chrome app import
2. We have just upgraded to read-receipt support
// FREEBIE
* Expose sendRequestConfigurationSyncMessage
// FREEBIE
* Fix handling of incoming delivery receipts - union with array
FREEBIE
* Add AES-GCM encryption for profiles
With tests.
* Add profileKey to DataMessage protobuf
// FREEBIE
* Decrypt and save profile names
// FREEBIE
* Save incoming profile keys
* Move pad/unpad to crypto module
// FREEBIE
* Support fetching avatars from the cdn
// FREEBIE
* Translate failed authentication errors
When AES-GCM authentication fails, webcrypto returns a very generic error. The
same error is thrown for invalid length inputs, but our earlier checks in
decryptProfile should rule out those failure modes and leave us safe to assume
that we either had bad ciphertext or the wrong key.
// FREEBIE
* Handle profile avatars (wip) and log decrypt errors
// FREEBIE
* Display profile avatars
Synced contact avatars will still override profile avatars.
* Display profile names in convo list
Only if we don't have a synced contact name.
// FREEBIE
* Make cdn url an environment config
Use different ones for staging and production
// FREEBIE
* Display profile name in conversation header
* Display profile name in group messages
* Update conversation header if profile avatar changes
// FREEBIE
* Style profile names small with ~
* Save profileKeys from contact sync messages
// FREEBIE
* Save profile keys from provisioning messages
For standalone accounts, generate a random profile key.
// FREEBIE
* Special case for one-time sync of our profile key
Android will use a contact sync message to sync a profile key from Android
clients who have just upgraded and generated their profile key. Normally we
should receive this data in a provisioning message.
// FREEBIE
* Infer profile sharing from synced data messages
* Populate profile keys on outgoing messages
Requires that `profileSharing` be set on the conversation.
// FREEBIE
* Support for the profile key update flag
When receiving a message with this flag, don't init a message record, just
process the profile key and move on.
// FREEBIE
* Display profile names in group member list
* Refresh contact's profile on profile key changes
// FREEBIE
* Catch errors on profile save
// FREEBIE
* Save our own synced contact info
Don't return early if we get a contact sync for our own number
// FREEBIE
* Add certificate pinning on https service requests
Make https requests to the server using node apis instead of browser apis, so we
can specify our own CA list, which contains only our own CA.
This protects us from MITM by a rogue CA.
As a bonus, this let's us drop the use of non-standard ports and just use good
ol' default 443 all the time, at least for http requests.
// FREEBIE
* Make certificateAuthorities an option on requests
Modify node-based xhr implementation based on driverdan/node-XMLHttpRequest,
adding support for setting certificate authorities on each request.
This allows us to pin our master CA for requests to the server and cdn but not
to the s3 attachment server, for instance. Also fix an exception when sending
binary data in a request: it is submitted as an array buffer, and must be
converted to a node Buffer since we are now using a node based request api.
// FREEBIE
* Import node-based xhr implementation
Add a copy of https://github.com/driverdan/node-XMLHttpRequest@86ff70e, and
expose it to the renderer in the preload script.
In later commits this module will be extended to support custom certificate
authorities.
// FREEBIE
* Support "arraybuffer" responseType on requests
When fetching attachments, we want the result as binary data rather than a utf8
string. This lets our node-based XMLHttpRequest honor the responseType property
if it is set on the xhr.
Note that naively using the raw `.buffer` from a node Buffer won't work, since
it is a reuseable backing buffer that is often much larger than the actual
content defined by the Buffer's offset and length.
Instead, we'll prepare a return buffer based on the response's content length
header, and incrementally write chunks of data into it as they arrive.
// FREEBIE
* Switch to self-signed server endpoint
* Log more error info on failed requests
With the node-based xhr, relevant error info are stored in statusText and
responseText when a request fails.
// FREEBIE
* Add node-based websocket w/ support for custom CA
// FREEBIE
* Support handling array buffers instead of blobs
Our node-based websocket calls onmessage with an arraybuffer instead of a blob.
For robustness (on the off chance we switch or update the socket implementation
agian) I've kept the machinery for converting blobs to array buffers.
// FREEBIE
* Destroy all wacky server ports
// FREEBIE
saveIdentityWithAtttributes allows directly setting all properties of an
identity key record. In AccountManager we use it to save our own identity
key after a new registration.
Previously we would remove the existing key first in order to coerce firstUse to
true, but now we can simply set it explicitly, along with a VERIFIED status.
// FREEBIE
Multiple cases here:
1. setting our own key on registration
1. changing identities from a safety number change dialog
Note that removeIdentityKey runs before saveIdentity, so we'll always end up
with firstUse: true on our own key.
// FREEBIE
Previously we would delete our own key from the trust store when
re-linking, in case it changed. We can also immediately take one step
further and store the new key. Typically this happens in the course of
requesting sync info from the master device, except in the case of
standalone clients.
Closes#596
// FREEBIE
Fix bug where re-installing would cause sync messages to fail and
produce unresolvable error indicators on messages that were actually
sent.
// FREEBIE
When we re-register, our deviceId might change, which makes our sessions
are no longer valid since the recipient will see us as a new device.
Fixes#388
Previously would fail to register keys by using the wrong username.
The username should be <number>.<deviceid> once we've confirmed our
account and received a deviceId from the server.
// FREEBIE
Following the pattern from previous commit, let the server class accept
a url and login credentials from the caller. Then integrate into
MessageReceiver and AccountManager.
// FREEBIE
This new endpoint should always issue a response to a provisioning
socket so if we don't receive one we should assume the connection has
been lost.
Closes#318
