git-annex/Command/TestRemote.hs
Joey Hess 9828f45d85
add RemoteStateHandle
This solves the problem of sameas remotes trampling over per-remote
state. Used for:

* per-remote state, of course
* per-remote metadata, also of course
* per-remote content identifiers, because two remote implementations
  could in theory generate the same content identifier for two different
  peices of content

While chunk logs are per-remote data, they don't use this, because the
number and size of chunks stored is a common property across sameas
remotes.

External special remote had a complication, where it was theoretically
possible for a remote to send SETSTATE or GETSTATE during INITREMOTE or
EXPORTSUPPORTED. Since the uuid of the remote is typically generate in
Remote.setup, it would only be possible to pass a Maybe
RemoteStateHandle into it, and it would otherwise have to construct its
own. Rather than go that route, I decided to send an ERROR in this case.
It seems unlikely that any existing external special remote will be
affected. They would have to make up a git-annex key, and set state for
some reason during INITREMOTE. I can imagine such a hack, but it doesn't
seem worth complicating the code in such an ugly way to support it.

Unfortunately, both TestRemote and Annex.Import needed the Remote
to have a new field added that holds its RemoteStateHandle.
2019-10-14 13:51:42 -04:00

336 lines
12 KiB
Haskell

{- git-annex command
-
- Copyright 2014-2019 Joey Hess <id@joeyh.name>
-
- Licensed under the GNU AGPL version 3 or higher.
-}
module Command.TestRemote where
import Command
import qualified Annex
import qualified Remote
import qualified Types.Remote as Remote
import qualified Types.Backend as Backend
import Types.KeySource
import Annex.Content
import Annex.WorkTree
import Backend
import Logs.Location
import qualified Backend.Hash
import Utility.Tmp
import Utility.Metered
import Utility.DataUnits
import Utility.CopyFile
import Types.Messages
import Types.Export
import Remote.Helper.ExportImport
import Remote.Helper.Chunked
import Git.Types
import Test.Tasty
import Test.Tasty.Runners
import Test.Tasty.HUnit
import "crypto-api" Crypto.Random
import qualified Data.ByteString as B
import qualified Data.ByteString.Lazy as L
import qualified Data.Map as M
cmd :: Command
cmd = command "testremote" SectionTesting
"test transfers to/from a remote"
paramRemote (seek <$$> optParser)
data TestRemoteOptions = TestRemoteOptions
{ testRemote :: RemoteName
, sizeOption :: ByteSize
, testReadonlyFile :: [FilePath]
}
optParser :: CmdParamsDesc -> Parser TestRemoteOptions
optParser desc = TestRemoteOptions
<$> argument str ( metavar desc )
<*> option (str >>= maybe (fail "parse error") return . readSize dataUnits)
( long "size" <> metavar paramSize
<> value (1024 * 1024)
<> help "base key size (default 1MiB)"
)
<*> many testreadonly
where
testreadonly = option str
( long "test-readonly" <> metavar paramFile
<> help "readonly test object"
)
seek :: TestRemoteOptions -> CommandSeek
seek = commandAction . start
start :: TestRemoteOptions -> CommandStart
start o = starting "testremote" (ActionItemOther (Just (testRemote o))) $ do
fast <- Annex.getState Annex.fast
r <- either giveup disableExportTree =<< Remote.byName' (testRemote o)
ks <- case testReadonlyFile o of
[] -> if Remote.readonly r
then giveup "This remote is readonly, so you need to use the --test-readonly option."
else do
showAction "generating test keys"
mapM randKey (keySizes basesz fast)
fs -> mapM (getReadonlyKey r) fs
let r' = if null (testReadonlyFile o)
then r
else r { Remote.readonly = True }
rs <- if Remote.readonly r'
then return [r']
else do
rs <- catMaybes <$> mapM (adjustChunkSize r') (chunkSizes basesz fast)
concat <$> mapM encryptionVariants rs
unavailrs <- catMaybes <$> mapM Remote.mkUnavailable [r']
exportr <- if Remote.readonly r'
then return Nothing
else exportTreeVariant r'
perform rs unavailrs exportr ks
where
basesz = fromInteger $ sizeOption o
perform :: [Remote] -> [Remote] -> Maybe Remote -> [Key] -> CommandPerform
perform rs unavailrs exportr ks = do
let ea = maybe exportUnsupported Remote.exportActions exportr
st <- Annex.getState id
let tests = testGroup "Remote Tests" $ concat
[ [ testGroup "unavailable remote" (testUnavailable st r (Prelude.head ks)) | r <- unavailrs ]
, [ testGroup (desc r k) (test st r k) | k <- ks, r <- rs ]
, [ testGroup (descexport k1 k2) (testExportTree st exportr ea k1 k2) | k1 <- take 2 ks, k2 <- take 2 (reverse ks) ]
]
ok <- case tryIngredients [consoleTestReporter] mempty tests of
Nothing -> error "No tests found!?"
Just act -> liftIO act
next $ cleanup rs ks ok
where
desc r' k = intercalate "; " $ map unwords
[ [ "key size", show (keySize k) ]
, [ show (getChunkConfig (Remote.config r')) ]
, ["encryption", fromMaybe "none" (M.lookup "encryption" (Remote.config r'))]
]
descexport k1 k2 = intercalate "; " $ map unwords
[ [ "exporttree=yes" ]
, [ "key1 size", show (keySize k1) ]
, [ "key2 size", show (keySize k2) ]
]
adjustChunkSize :: Remote -> Int -> Annex (Maybe Remote)
adjustChunkSize r chunksize = adjustRemoteConfig r
(M.insert "chunk" (show chunksize))
-- Variants of a remote with no encryption, and with simple shared
-- encryption. Gpg key based encryption is not tested.
encryptionVariants :: Remote -> Annex [Remote]
encryptionVariants r = do
noenc <- adjustRemoteConfig r (M.insert "encryption" "none")
sharedenc <- adjustRemoteConfig r $
M.insert "encryption" "shared" .
M.insert "highRandomQuality" "false"
return $ catMaybes [noenc, sharedenc]
-- Variant of a remote with exporttree disabled.
disableExportTree :: Remote -> Annex Remote
disableExportTree r = maybe (error "failed disabling exportree") return
=<< adjustRemoteConfig r (M.delete "exporttree")
-- Variant of a remote with exporttree enabled.
exportTreeVariant :: Remote -> Annex (Maybe Remote)
exportTreeVariant r = ifM (Remote.isExportSupported r)
( adjustRemoteConfig r $
M.insert "encryption" "none" . M.insert "exporttree" "yes"
, return Nothing
)
-- Regenerate a remote with a modified config.
adjustRemoteConfig :: Remote -> (Remote.RemoteConfig -> Remote.RemoteConfig) -> Annex (Maybe Remote)
adjustRemoteConfig r adjustconfig = do
repo <- Remote.getRepo r
Remote.generate (Remote.remotetype r)
repo
(Remote.uuid r)
(adjustconfig (Remote.config r))
(Remote.gitconfig r)
(Remote.remoteStateHandle r)
test :: Annex.AnnexState -> Remote -> Key -> [TestTree]
test st r k = catMaybes
[ whenwritable $ check "removeKey when not present" remove
, whenwritable $ present False
, whenwritable $ check "storeKey" store
, whenwritable $ present True
, whenwritable $ check "storeKey when already present" store
, Just $ present True
, Just $ check "retrieveKeyFile" $ do
lockContentForRemoval k removeAnnex
get
, Just $ check "fsck downloaded object" fsck
, Just $ check "retrieveKeyFile resume from 33%" $ do
loc <- Annex.calcRepo (gitAnnexLocation k)
tmp <- prepTmp k
partial <- liftIO $ bracket (openBinaryFile loc ReadMode) hClose $ \h -> do
sz <- hFileSize h
L.hGet h $ fromInteger $ sz `div` 3
liftIO $ L.writeFile tmp partial
lockContentForRemoval k removeAnnex
get
, Just $ check "fsck downloaded object" fsck
, Just $ check "retrieveKeyFile resume from 0" $ do
tmp <- prepTmp k
liftIO $ writeFile tmp ""
lockContentForRemoval k removeAnnex
get
, Just $ check "fsck downloaded object" fsck
, Just $ check "retrieveKeyFile resume from end" $ do
loc <- Annex.calcRepo (gitAnnexLocation k)
tmp <- prepTmp k
void $ liftIO $ copyFileExternal CopyAllMetaData loc tmp
lockContentForRemoval k removeAnnex
get
, Just $ check "fsck downloaded object" fsck
, whenwritable $ check "removeKey when present" remove
, whenwritable $ present False
]
where
whenwritable a = if Remote.readonly r then Nothing else Just a
check desc a = testCase desc $
Annex.eval st (Annex.setOutput QuietOutput >> a) @? "failed"
present b = check ("present " ++ show b) $
(== Right b) <$> Remote.hasKey r k
fsck = case maybeLookupBackendVariety (keyVariety k) of
Nothing -> return True
Just b -> case Backend.verifyKeyContent b of
Nothing -> return True
Just verifier -> verifier k (serializeKey k)
get = getViaTmp (Remote.retrievalSecurityPolicy r) (RemoteVerify r) k $ \dest ->
Remote.retrieveKeyFile r k (AssociatedFile Nothing)
dest nullMeterUpdate
store = Remote.storeKey r k (AssociatedFile Nothing) nullMeterUpdate
remove = Remote.removeKey r k
testExportTree :: Annex.AnnexState -> Maybe Remote -> Remote.ExportActions Annex -> Key -> Key -> [TestTree]
testExportTree _ Nothing _ _ _ = []
testExportTree st (Just _) ea k1 k2 =
[ check "check present export when not present" $
not <$> checkpresentexport k1
, check "remove export when not present" (removeexport k1)
, check "store export" (storeexport k1)
, check "check present export after store" $
checkpresentexport k1
, check "store export when already present" (storeexport k1)
, check "retrieve export" (retrieveexport k1)
, check "store new content to export" (storeexport k2)
, check "check present export after store of new content" $
checkpresentexport k2
, check "retrieve export new content" (retrieveexport k2)
, check "remove export" (removeexport k2)
, check "check present export after remove" $
not <$> checkpresentexport k2
, check "retrieve export fails after removal" $
not <$> retrieveexport k2
, check "remove export directory" removeexportdirectory
, check "remove export directory that is already removed" removeexportdirectory
-- renames are not tested because remotes do not need to support them
]
where
testexportdirectory = "testremote-export"
testexportlocation = mkExportLocation (testexportdirectory </> "location")
check desc a = testCase desc $
Annex.eval st (Annex.setOutput QuietOutput >> a) @? "failed"
storeexport k = do
loc <- Annex.calcRepo (gitAnnexLocation k)
Remote.storeExport ea loc k testexportlocation nullMeterUpdate
retrieveexport k = withTmpFile "exported" $ \tmp h -> do
liftIO $ hClose h
ifM (Remote.retrieveExport ea k testexportlocation tmp nullMeterUpdate)
( verifyKeyContent RetrievalAllKeysSecure AlwaysVerify UnVerified k tmp
, return False
)
checkpresentexport k = Remote.checkPresentExport ea k testexportlocation
removeexport k = Remote.removeExport ea k testexportlocation
removeexportdirectory = case Remote.removeExportDirectory ea of
Nothing -> return True
Just a -> a (mkExportDirectory testexportdirectory)
testUnavailable :: Annex.AnnexState -> Remote -> Key -> [TestTree]
testUnavailable st r k =
[ check (== Right False) "removeKey" $
Remote.removeKey r k
, check (== Right False) "storeKey" $
Remote.storeKey r k (AssociatedFile Nothing) nullMeterUpdate
, check (`notElem` [Right True, Right False]) "checkPresent" $
Remote.checkPresent r k
, check (== Right False) "retrieveKeyFile" $
getViaTmp (Remote.retrievalSecurityPolicy r) (RemoteVerify r) k $ \dest ->
Remote.retrieveKeyFile r k (AssociatedFile Nothing) dest nullMeterUpdate
, check (== Right False) "retrieveKeyFileCheap" $
getViaTmp (Remote.retrievalSecurityPolicy r) (RemoteVerify r) k $ \dest -> unVerified $
Remote.retrieveKeyFileCheap r k (AssociatedFile Nothing) dest
]
where
check checkval desc a = testCase desc $ do
v <- Annex.eval st $ do
Annex.setOutput QuietOutput
either (Left . show) Right <$> tryNonAsync a
checkval v @? ("(got: " ++ show v ++ ")")
cleanup :: [Remote] -> [Key] -> Bool -> CommandCleanup
cleanup rs ks ok
| all Remote.readonly rs = return ok
| otherwise = do
forM_ rs $ \r -> forM_ ks (Remote.removeKey r)
forM_ ks $ \k -> lockContentForRemoval k removeAnnex
return ok
chunkSizes :: Int -> Bool -> [Int]
chunkSizes base False =
[ 0 -- no chunking
, base `div` 100
, base `div` 1000
, base
]
chunkSizes _ True =
[ 0
]
keySizes :: Int -> Bool -> [Int]
keySizes base fast = filter want
[ 0 -- empty key is a special case when chunking
, base
, base + 1
, base - 1
, base * 2
]
where
want sz
| fast = sz <= base && sz > 0
| otherwise = sz > 0
randKey :: Int -> Annex Key
randKey sz = withTmpFile "randkey" $ \f h -> do
gen <- liftIO (newGenIO :: IO SystemRandom)
case genBytes sz gen of
Left e -> error $ "failed to generate random key: " ++ show e
Right (rand, _) -> liftIO $ B.hPut h rand
liftIO $ hClose h
let ks = KeySource
{ keyFilename = f
, contentLocation = f
, inodeCache = Nothing
}
k <- fromMaybe (error "failed to generate random key")
<$> Backend.getKey Backend.Hash.testKeyBackend ks nullMeterUpdate
_ <- moveAnnex k f
return k
getReadonlyKey :: Remote -> FilePath -> Annex Key
getReadonlyKey r f = lookupFile f >>= \case
Nothing -> giveup $ f ++ " is not an annexed file"
Just k -> do
unlessM (inAnnex k) $
giveup $ f ++ " does not have its content locally present, cannot test it"
unlessM ((Remote.uuid r `elem`) <$> loggedLocations k) $
giveup $ f ++ " is not stored in the remote being tested, cannot test it"
return k