git-annex/Remote/Directory.hs
2012-03-15 20:39:25 -04:00

276 lines
9.3 KiB
Haskell
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

{- A "remote" that is just a filesystem directory.
-
- Copyright 2011-2012 Joey Hess <joey@kitenet.net>
-
- Licensed under the GNU GPL version 3 or higher.
-}
module Remote.Directory (remote) where
import qualified Data.ByteString.Lazy.Char8 as L
import qualified Data.ByteString.Char8 as S
import qualified Data.Map as M
import Control.Exception (bracket)
import Common.Annex
import Types.Remote
import qualified Git
import Config
import Utility.FileMode
import Remote.Helper.Special
import Remote.Helper.Encryptable
import Crypto
import Utility.DataUnits
import Data.Int
remote :: RemoteType
remote = RemoteType {
typename = "directory",
enumerate = findSpecialRemotes "directory",
generate = gen,
setup = directorySetup
}
gen :: Git.Repo -> UUID -> Maybe RemoteConfig -> Annex Remote
gen r u c = do
dir <- getConfig r "directory" (error "missing directory")
cst <- remoteCost r cheapRemoteCost
let chunksize = chunkSize c
return $ encryptableRemote c
(storeEncrypted dir chunksize)
(retrieveEncrypted dir chunksize)
Remote {
uuid = u,
cost = cst,
name = Git.repoDescribe r,
storeKey = store dir chunksize,
retrieveKeyFile = retrieve dir chunksize,
retrieveKeyFileCheap = retrieveCheap dir chunksize,
removeKey = remove dir chunksize,
hasKey = checkPresent dir chunksize,
hasKeyCheap = True,
whereisKey = Nothing,
config = Nothing,
repo = r,
remotetype = remote
}
where
type ChunkSize = Maybe Int64
chunkSize :: Maybe RemoteConfig -> ChunkSize
chunkSize Nothing = Nothing
chunkSize (Just m) =
case M.lookup "chunksize" m of
Nothing -> Nothing
Just v -> case readSize dataUnits v of
Nothing -> error "bad chunksize"
Just size
| size <= 0 -> error "bad chunksize"
| otherwise -> Just $ fromInteger size
directorySetup :: UUID -> RemoteConfig -> Annex RemoteConfig
directorySetup u c = do
-- verify configuration is sane
let dir = fromMaybe (error "Specify directory=") $
M.lookup "directory" c
liftIO $ unlessM (doesDirectoryExist dir) $
error $ "Directory does not exist: " ++ dir
c' <- encryptionSetup c
-- The directory is stored in git config, not in this remote's
-- persistant state, so it can vary between hosts.
gitConfigSpecialRemote u c' "directory" dir
return $ M.delete "directory" c'
{- Locations to try to access a given Key in the Directory. -}
locations :: FilePath -> Key -> [FilePath]
locations d k = map (d </>) (keyPaths k)
{- An infinite stream of chunks to use for a given file. -}
chunkStream :: FilePath -> [FilePath]
chunkStream f = map (\n -> f ++ ".chunk" ++ show n) [1 :: Integer ..]
{- A file that records the number of chunks used. -}
chunkCount :: FilePath -> FilePath
chunkCount f = f ++ ".chunkcount"
withCheckedFiles :: (FilePath -> IO Bool) -> ChunkSize -> FilePath -> Key -> ([FilePath] -> IO Bool) -> IO Bool
withCheckedFiles _ _ [] _ _ = return False
withCheckedFiles check Nothing d k a = go $ locations d k
where
go [] = return False
go (f:fs) = ifM (check f) ( a [f] , go fs )
withCheckedFiles check (Just _) d k a = go $ locations d k
where
go [] = return False
go (f:fs) = do
let chunkcount = chunkCount f
use <- check chunkcount
if use
then do
count <- readcount chunkcount
let chunks = take count $ chunkStream f
ifM (all id <$> mapM check chunks)
( a chunks , return False )
else go fs
readcount f = fromMaybe (error $ "cannot parse " ++ f)
. (readish :: String -> Maybe Int)
<$> readFile f
withStoredFiles :: ChunkSize -> FilePath -> Key -> ([FilePath] -> IO Bool) -> IO Bool
withStoredFiles = withCheckedFiles doesFileExist
store :: FilePath -> ChunkSize -> Key -> Annex Bool
store d chunksize k = do
src <- inRepo $ gitAnnexLocation k
metered k $ \meterupdate ->
liftIO $ catchBoolIO $ storeHelper d chunksize k $ \dests ->
case chunksize of
Nothing -> do
let dest = Prelude.head dests
meteredWriteFile meterupdate dest
=<< L.readFile src
return [dest]
Just _ ->
storeSplit meterupdate chunksize dests
=<< L.readFile src
storeEncrypted :: FilePath -> ChunkSize -> (Cipher, Key) -> Key -> Annex Bool
storeEncrypted d chunksize (cipher, enck) k = do
src <- inRepo $ gitAnnexLocation k
metered k $ \meterupdate ->
liftIO $ catchBoolIO $ storeHelper d chunksize enck $ \dests ->
withEncryptedContent cipher (L.readFile src) $ \s ->
case chunksize of
Nothing -> do
let dest = Prelude.head dests
meteredWriteFile meterupdate dest s
return [dest]
Just _ -> storeSplit meterupdate chunksize dests s
{- Splits a ByteString into chunks and writes to dests, obeying configured
- chunk size (not to be confused with the L.ByteString chunk size).
- Note: Must always write at least one file, even for empty ByteString. -}
storeSplit :: MeterUpdate -> ChunkSize -> [FilePath] -> L.ByteString -> IO [FilePath]
storeSplit _ Nothing _ _ = error "bad storeSplit call"
storeSplit _ _ [] _ = error "bad storeSplit call"
storeSplit meterupdate (Just chunksize) alldests@(firstdest:_) b
| L.null b = do
-- must always write at least one file, even for empty
L.writeFile firstdest b
return [firstdest]
| otherwise = storeSplit' meterupdate chunksize alldests (L.toChunks b) []
storeSplit' :: MeterUpdate -> Int64 -> [FilePath] -> [S.ByteString] -> [FilePath] -> IO [FilePath]
storeSplit' _ _ [] _ _ = error "ran out of dests"
storeSplit' _ _ _ [] c = return $ reverse c
storeSplit' meterupdate chunksize (d:dests) bs c = do
bs' <- bracket (openFile d WriteMode) hClose (feed chunksize bs)
storeSplit' meterupdate chunksize dests bs' (d:c)
where
feed _ [] _ = return []
feed sz (l:ls) h = do
let s = fromIntegral $ S.length l
if s <= sz
then do
S.hPut h l
meterupdate $ toInteger s
feed (sz - s) ls h
else return (l:ls)
{- Write a L.ByteString to a file, updating a progress meter
- after each chunk of the L.ByteString, typically every 64 kb or so. -}
meteredWriteFile :: MeterUpdate -> FilePath -> L.ByteString -> IO ()
meteredWriteFile meterupdate dest b =
meteredWriteFile' meterupdate dest (L.toChunks b) feeder
where
feeder chunks = return ([], chunks)
{- Writes a series of S.ByteString chunks to a file, updating a progress
- meter after each chunk. The feeder is called to get more chunks. -}
meteredWriteFile' :: MeterUpdate -> FilePath -> s -> (s -> IO (s, [S.ByteString])) -> IO ()
meteredWriteFile' meterupdate dest startstate feeder =
bracket (openFile dest WriteMode) hClose (feed startstate [])
where
feed state [] h = do
(state', cs) <- feeder state
if null cs then return () else feed state' cs h
feed state (c:cs) h = do
S.hPut h c
meterupdate $ toInteger $ S.length c
feed state cs h
{- Generates a list of destinations to write to in order to store a key.
- When chunksize is specified, this list will be a list of chunks.
- The action should store the file, and return a list of the destinations
- it stored it to, or [] on error.
- The stored files are only put into their final place once storage is
- complete.
-}
storeHelper :: FilePath -> ChunkSize -> Key -> ([FilePath] -> IO [FilePath]) -> IO Bool
storeHelper d chunksize key a = do
let dir = parentDir desttemplate
createDirectoryIfMissing True dir
allowWrite dir
stored <- a tmpdests
forM_ stored $ \f -> do
let dest = detmpprefix f
renameFile f dest
preventWrite dest
when (chunksize /= Nothing) $ do
let chunkcount = chunkCount desttemplate
_ <- tryIO $ allowWrite chunkcount
writeFile chunkcount (show $ length stored)
preventWrite chunkcount
preventWrite dir
return (not $ null stored)
where
desttemplate = Prelude.head $ locations d key
tmpdests = case chunksize of
Nothing -> [desttemplate ++ tmpprefix]
Just _ -> map (++ tmpprefix) (chunkStream desttemplate)
tmpprefix = ".tmp"
detmpprefix f = take (length f - tmpprefixlen) f
tmpprefixlen = length tmpprefix
retrieve :: FilePath -> ChunkSize -> Key -> FilePath -> Annex Bool
retrieve d chunksize k f = metered k $ \meterupdate ->
liftIO $ withStoredFiles chunksize d k $ \files ->
catchBoolIO $ do
meteredWriteFile' meterupdate f files feeder
return True
where
feeder [] = return ([], [])
feeder (x:xs) = do
chunks <- L.toChunks <$> L.readFile x
return (xs, chunks)
retrieveEncrypted :: FilePath -> ChunkSize -> (Cipher, Key) -> Key -> FilePath -> Annex Bool
retrieveEncrypted d chunksize (cipher, enck) k f = metered k $ \meterupdate ->
liftIO $ withStoredFiles chunksize d enck $ \files ->
catchBoolIO $ do
withDecryptedContent cipher (L.concat <$> mapM L.readFile files) $
meteredWriteFile meterupdate f
return True
retrieveCheap :: FilePath -> ChunkSize -> Key -> FilePath -> Annex Bool
retrieveCheap _ (Just _) _ _ = return False -- no cheap retrieval for chunks
retrieveCheap d _ k f = liftIO $ withStoredFiles Nothing d k go
where
go [file] = catchBoolIO $ createSymbolicLink file f >> return True
go _files = return False
remove :: FilePath -> ChunkSize -> Key -> Annex Bool
remove d chunksize k = liftIO $ withStoredFiles chunksize d k go
where
go files = all id <$> mapM removefile files
removefile file = catchBoolIO $ do
let dir = parentDir file
allowWrite dir
removeFile file
_ <- tryIO $ removeDirectory dir
return True
checkPresent :: FilePath -> ChunkSize -> Key -> Annex (Either String Bool)
checkPresent d chunksize k = liftIO $ catchMsgIO $ withStoredFiles chunksize d k $
const $ return True -- withStoredFiles checked that it exists