cbd53b4a8c
The only thing lost is ./ghci Speed: make fast used to take 20 seconds here, when rebuilding from touching Command/Unused.hs. With cabal, it's 29 seconds.
1668 lines
77 KiB
Text
1668 lines
77 KiB
Text
git-annex (4.20130217) UNRELEASED; urgency=low
|
|
|
|
* annex.version is now set to 4 for direct mode repositories.
|
|
* Should now fully support git repositories with core.symlinks=false;
|
|
always using git's pseudosymlink files in such repositories.
|
|
* webapp: Allow creating repositories on filesystems that lack support for
|
|
symlinks.
|
|
* webapp: Can now add a new local repository, and make it sync with
|
|
the main local repository.
|
|
* Android: Bundle now includes openssh.
|
|
* Android: Support ssh connection caching.
|
|
* Android: Assistant is fully working. (But no webapp yet.)
|
|
* Direct mode: Support filesystems like FAT which can change their inodes
|
|
each time they are mounted.
|
|
* Direct mode: Fix support for adding a modified file.
|
|
* Avoid passing -p to rsync, to interoperate with crippled filesystems.
|
|
* Additional GIT_DIR support bugfixes. May actually work now.
|
|
* webapp: Display any error message from git init if it fails to create
|
|
a repository.
|
|
* Fix a reversion in matching globs introduced in the last release,
|
|
where "*" did not match files inside subdirectories. No longer uses
|
|
the Glob library.
|
|
* copy: Update location log when no copy was performed, if the location
|
|
log was out of date.
|
|
* Makefile now builds using cabal, taking advantage of cabal's automatic
|
|
detection of appropriate build flags.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sun, 17 Feb 2013 16:42:16 -0400
|
|
|
|
git-annex (3.20130216) unstable; urgency=low
|
|
|
|
* Now uses the Haskell uuid library, rather than needing a uuid program.
|
|
* Now uses the Haskell Glob library, rather than pcre-light, avoiding
|
|
the need to install libpcre. Currently done only for Cabal or when
|
|
the Makefile is made to use -DWITH_GLOB
|
|
* Android port now available (command-line only).
|
|
* New annex.crippledfilesystem setting, allows use of git-annex
|
|
repositories on FAT and even worse filesystems; avoiding use of
|
|
hard links and locked down permissions settings. (Support is incomplete.)
|
|
* init: Detect when the repository is on a filesystem that does not
|
|
support hard links, or symlinks, or unix permissions, and set
|
|
annex.crippledfilesystem, as well as annex.direct.
|
|
* add: Improved detection of files that are modified while being added.
|
|
* Fix a bug in direct mode, introduced in the previous release, where
|
|
if a file was dropped and then got back, it would be stored in indirect
|
|
mode.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sat, 16 Feb 2013 10:03:26 -0400
|
|
|
|
git-annex (3.20130207) unstable; urgency=low
|
|
|
|
* webapp: Now allows restarting any threads that crash.
|
|
* Adjust debian package to only build-depend on DAV on architectures
|
|
where it is available.
|
|
* addurl --fast: Use curl, rather than haskell HTTP library, to support https.
|
|
* annex.autocommit: New setting, can be used to disable autocommit
|
|
of changed files by the assistant, while it still does data syncing
|
|
and other tasks.
|
|
* assistant: Ignore .DS_Store on OSX.
|
|
* assistant: Fix location log when adding new file in direct mode.
|
|
* Deal with stale mappings for deleted file in direct mode.
|
|
* pre-commit: Update direct mode mappings.
|
|
* uninit, unannex --fast: If hard link creation fails, fall back to slow
|
|
mode.
|
|
* Clean up direct mode cache and mapping info when dropping keys.
|
|
* dropunused: Clean up stale direct mode cache and mapping info not
|
|
removed before.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Thu, 07 Feb 2013 12:45:25 -0400
|
|
|
|
git-annex (3.20130124) unstable; urgency=low
|
|
|
|
* Added source repository group, that only retains files until they've
|
|
been transferred to another repository. Useful for things like
|
|
repositories on cameras.
|
|
* Added manual repository group. Use to prevent the assistant from
|
|
downloading any file contents to keep things in sync. Instead
|
|
`git annex get`, `git annex drop` etc can be used manually as desired.
|
|
* webapp: More adjustments to longpoll code to deal with changes in
|
|
variable quoting in different versions of shakespeare-js.
|
|
* webapp: Avoid an error if a transfer is stopped just as it finishes.
|
|
Closes: #698184
|
|
* webapp: Now always logs to .git/annex/daemon.log
|
|
* webapp: Has a page to view the log, accessed from the control menu.
|
|
* webapp: Fix crash adding removable drive that has an annex directory
|
|
in it that is not a git repository.
|
|
* Deal with incompatability in gpg2, which caused prompts for encryption
|
|
passphrases rather than using the supplied --passphrase-fd.
|
|
* bugfix: Union merges involving two or more repositories could sometimes
|
|
result in data from one repository getting lost. This could result
|
|
in the location log data becoming wrong, and fsck being needed to fix it.
|
|
* sync: Automatic merge conflict resolution now stages deleted files.
|
|
* Depend on git 1.7.7.6 for --no-edit. Closes: #698399
|
|
* Fix direct mode mapping code to always store direct mode filenames
|
|
relative to the top of the repository, even when operating inside a
|
|
subdirectory.
|
|
* fsck: Detect and fix consistency errors in direct mode mapping files.
|
|
* Avoid filename encoding errors when writing direct mode mappings.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 22 Jan 2013 07:11:59 +1100
|
|
|
|
git-annex (3.20130114) unstable; urgency=low
|
|
|
|
* Now handles the case where a file that's being transferred to a remote
|
|
is modified in place, which direct mode allows. When this
|
|
happens, the transfer now fails, rather than allow possibly corrupt
|
|
data into the remote.
|
|
* fsck: Better checking of file content in direct mode.
|
|
* drop: Suggest using git annex move when numcopies prevents dropping a file.
|
|
* webapp: Repo switcher filters out repos that do not exist any more
|
|
(or are on a drive that's not mounted).
|
|
* webapp: Use IP address, rather than localhost, since some systems may
|
|
have configuration problems or other issues that prevent web browsers
|
|
from connecting to the right localhost IP for the webapp.
|
|
* webapp: Adjust longpoll code to work with recent versions of
|
|
shakespeare-js.
|
|
* assistant: Support new gvfs dbus names used in Gnome 3.6.
|
|
* In direct mode, files with the same key are no longer hardlinked, as
|
|
that would cause a surprising behavior if modifying one, where the other
|
|
would also change.
|
|
* webapp: Avoid illegal characters in hostname when creating S3 or
|
|
Glacier remote.
|
|
* assistant: Avoid committer crashing if a file is deleted at the wrong
|
|
instant.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Mon, 14 Jan 2013 15:25:18 -0400
|
|
|
|
git-annex (3.20130107) unstable; urgency=low
|
|
|
|
* webapp: Add UI to stop and restart assistant.
|
|
* committer: Fix a file handle leak.
|
|
* assistant: Make expensive transfer scan work fully in direct mode.
|
|
* More commands work in direct mode repositories: find, whereis, move, copy,
|
|
drop, log, fsck, add, addurl.
|
|
* sync: No longer automatically adds files in direct mode.
|
|
* assistant: Detect when system is not configured with a user name,
|
|
and set environment to prevent git from failing.
|
|
* direct: Avoid hardlinking symlinks that point to the same content
|
|
when the content is not present.
|
|
* Fix transferring files to special remotes in direct mode.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Mon, 07 Jan 2013 01:01:41 -0400
|
|
|
|
git-annex (3.20130102) unstable; urgency=low
|
|
|
|
* direct, indirect: New commands, that switch a repository to and from
|
|
direct mode. In direct mode, files are accessed directly, rather than
|
|
via symlinks. Note that direct mode is currently experimental. Many
|
|
git-annex commands do not work in direct mode. Some git commands can
|
|
cause data loss when used in direct mode repositories.
|
|
* assistant: Now uses direct mode by default when setting up a new
|
|
local repository.
|
|
* OSX assistant: Uses the FSEvents API to detect file changes.
|
|
This avoids issues with running out of file descriptors on large trees,
|
|
as well as allowing detection of modification of files in direct mode.
|
|
Other BSD systems still use kqueue.
|
|
* kqueue: Fix bug that made broken symlinks not be noticed.
|
|
* vicfg: Quote filename. Closes: #696193
|
|
* Bugfix: Fixed bug parsing transfer info files, where the newline after
|
|
the filename was included in it. This was generally benign, but in
|
|
the assistant, it caused unexpected dropping of preferred content.
|
|
* Bugfix: Remove leading \ from checksums output by sha*sum commands,
|
|
when the filename contains \ or a newline. Closes: #696384
|
|
* fsck: Still accept checksums with a leading \ as valid, now that
|
|
above bug is fixed.
|
|
* SHA*E backends: Exclude non-alphanumeric characters from extensions.
|
|
* migrate: Remove leading \ in SHA* checksums, and non-alphanumerics
|
|
from extensions of SHA*E keys.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Wed, 02 Jan 2013 13:21:34 -0400
|
|
|
|
git-annex (3.20121211) unstable; urgency=low
|
|
|
|
* webapp: Defaults to sharing box.com account info with friends, allowing
|
|
one-click enabling of the repository.
|
|
* Fix broken .config/git-annex/program installed by standalone tarball.
|
|
* assistant: Retrival from glacier now handled.
|
|
* Include ssh in standalone tarball and OSX app.
|
|
* watch: Avoid leaving hard links to files behind in .git/annex/tmp
|
|
if a file is deleted or moved while it's being quarantined in preparation
|
|
to being added to the annex.
|
|
* Allow `git annex drop --from web`; of course this does not remove
|
|
any file from the web, but it does make git-annex remove all urls
|
|
associated with a file.
|
|
* webapp: S3 and Glacier forms now have a select list of all
|
|
currently-supported AWS regions.
|
|
* webdav: Avoid trying to set props, avoiding incompatability with
|
|
livedrive.com. Needs DAV version 0.3.
|
|
* webapp: Prettify error display.
|
|
* webapp: Fix bad interaction between required fields and modals.
|
|
* webapp: Added help buttons and links next to fields that require
|
|
explanations.
|
|
* webapp: Encryption can be disabled when setting up remotes.
|
|
* assistant: Avoid trying to drop content from remotes that don't have it.
|
|
* assistant: Allow periods in ssh key comments.
|
|
* get/copy --auto: Transfer data even if it would exceed numcopies,
|
|
when preferred content settings want it.
|
|
* drop --auto: Fix dropping content when there are no preferred content
|
|
settings.
|
|
* webapp: Allow user to specify the port when setting up a ssh or rsync
|
|
remote.
|
|
* assistant: Fix syncing to just created ssh remotes.
|
|
* Enable WebDAV support in Debian package. Closes: #695532
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 11 Dec 2012 11:25:03 -0400
|
|
|
|
git-annex (3.20121127) unstable; urgency=low
|
|
|
|
* Fix dirContentsRecursive, which had missed some files in deeply nested
|
|
subdirectories. Could affect various parts of git-annex.
|
|
* rsync: Fix bug introduced in last release that broke encrypted rsync
|
|
special remotes.
|
|
* The standalone builds now unset their special path and library path
|
|
variables before running the system web browser.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 27 Nov 2012 17:07:32 -0400
|
|
|
|
git-annex (3.20121126) unstable; urgency=low
|
|
|
|
* New webdav and Amazon glacier special remotes.
|
|
* Display a warning when a non-existing file or directory is specified.
|
|
* webapp: Added configurator for Box.com.
|
|
* webapp: Show error messages to user when testing XMPP creds.
|
|
* Fix build of assistant without yesod.
|
|
* webapp: The list of repositiories refreshes when new repositories are
|
|
added, including when new repository configurations are pushed in from
|
|
remotes.
|
|
* OSX: Fix RunAtLoad value in plist file.
|
|
* Getting a file from chunked directory special remotes no longer buffers
|
|
it all in memory.
|
|
* S3: Added progress display for uploading and downloading.
|
|
* directory special remote: Made more efficient and robust.
|
|
* Bugfix: directory special remote could loop forever storing a key
|
|
when a too small chunksize was configured.
|
|
* Allow controlling whether login credentials for S3 and webdav are
|
|
committed to the repository, by setting embedcreds=yes|no when running
|
|
initremote.
|
|
* Added smallarchive repository group, that only archives files that are
|
|
in archive directories. Used by default for glacier when set up in the
|
|
webapp.
|
|
* assistant: Fixed handling of toplevel archive directory and
|
|
client repository group.
|
|
* assistant: Apply preferred content settings when a new symlink
|
|
is created, or a symlink gets renamed. Made archive directories work.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Mon, 26 Nov 2012 11:37:49 -0400
|
|
|
|
git-annex (3.20121112) unstable; urgency=low
|
|
|
|
* assistant: Can use XMPP to notify other nodes about pushes made to other
|
|
repositories, as well as pushing to them directly over XMPP.
|
|
* wepapp: Added an XMPP configuration interface.
|
|
* webapp: Supports pairing over XMPP, with both friends, and other repos
|
|
using the same account.
|
|
* assistant: Drops non-preferred content when possible.
|
|
* assistant: Notices, and applies config changes as they are made to
|
|
the git-annex branch, including config changes pushed in from remotes.
|
|
* git-annex-shell: GIT_ANNEX_SHELL_DIRECTORY can be set to limit it
|
|
to operating on a specified directory.
|
|
* webapp: When setting up authorized_keys, use GIT_ANNEX_SHELL_DIRECTORY.
|
|
* Preferred content path matching bugfix.
|
|
* Preferred content expressions cannot use "in=".
|
|
* Preferred content expressions can use "present".
|
|
* Fix handling of GIT_DIR when it refers to a git submodule.
|
|
* Depend on and use the Haskell SafeSemaphore library, which provides
|
|
exception-safe versions of SampleVar and QSemN.
|
|
Thanks, Ben Gamari for an excellent patch set.
|
|
* file:/// URLs can now be used with the web special remote.
|
|
* webapp: Allow dashes in ssh key comments when pairing.
|
|
* uninit: Check and abort if there are symlinks to annexed content that
|
|
are not checked into git.
|
|
* webapp: Switched to using the same multicast IP address that avahi uses.
|
|
* bup: Don't pass - to bup-split to make it read stdin; bup 0.25
|
|
does not accept that.
|
|
* bugfix: Don't fail transferring content from read-only repos.
|
|
Closes: #691341
|
|
* configure: Check that checksum programs produce correct checksums.
|
|
* Re-enable dbus, using a new version of the library that fixes the memory
|
|
leak.
|
|
* NetWatcher: When dbus connection is lost, try to reconnect.
|
|
* Use USER and HOME environment when set, and only fall back to getpwent,
|
|
which doesn't work with LDAP or NIS.
|
|
* rsync special remote: Include annex-rsync-options when running rsync
|
|
to test a key's presence.
|
|
* The standalone tarball's runshell now takes care of installing a
|
|
~/.ssh/git-annex-shell wrapper the first time it's run.
|
|
* webapp: Make an initial, empty commit so there is a master branch
|
|
* assistant: Fix syncing local drives.
|
|
* webapp: Fix creation of rsync.net repositories.
|
|
* webapp: Fix renaming of special remotes.
|
|
* webapp: Generate better git remote names.
|
|
* webapp: Ensure that rsync special remotes are enabled using the same
|
|
name they were originally created using.
|
|
* Bugfix: Fix hang in webapp when setting up a ssh remote with an absolute
|
|
path.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Mon, 12 Nov 2012 10:39:47 -0400
|
|
|
|
git-annex (3.20121017) unstable; urgency=low
|
|
|
|
* Fix zombie cleanup reversion introduced in 3.20121009.
|
|
* Additional fix to support git submodules.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 16 Oct 2012 21:10:14 -0400
|
|
|
|
git-annex (3.20121016) unstable; urgency=low
|
|
|
|
* vicfg: New file format, avoids ambiguity with repos that have the same
|
|
description, or no description.
|
|
* Bug fix: A recent change caused git-annex-shell to crash.
|
|
* Better preferred content expression for transfer repos.
|
|
* webapp: Repository edit form can now edit the name of a repository.
|
|
* webapp: Make bare repositories on removable drives, as there is nothing
|
|
to ensure non-bare repos get updated when syncing.
|
|
* webapp: Better behavior when pausing syncing to a remote when a transfer
|
|
scan is running and queueing new transfers for that remote.
|
|
* The standalone binaries are now built to not use ssh connection caching,
|
|
in order to work with old versions of ssh.
|
|
* A relative core.worktree is relative to the gitdir. Now that this is
|
|
handled correctly, git-annex can be used in git submodules.
|
|
* Temporarily disable use of dbus, as the haskell dbus library blows up
|
|
when losing connection, which will need to be fixed upstream.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 16 Oct 2012 15:25:22 -0400
|
|
|
|
git-annex (3.20121010) unstable; urgency=low
|
|
|
|
* Renamed --ingroup to --inallgroup.
|
|
* Standard groups changed to client, transfer, archive, and backup.
|
|
Each of these has its own standard preferred content setting.
|
|
* dead: Remove dead repository from all groups.
|
|
* Avoid unsetting HOME when running certian git commands. Closes: #690193
|
|
* test: Fix threaded runtime hang.
|
|
* Makefile: Avoid building with -threaded if the ghc threaded runtime does
|
|
not exist.
|
|
* webapp: Improve wording of intro display. Closes: #689848
|
|
* webapp: Repositories can now be configured, to change their description,
|
|
their group, or even to disable syncing to them.
|
|
* git config remote.name.annex-sync can be used to control whether
|
|
a remote gets synced.
|
|
* Fix a crash when merging files in the git-annex branch that contain
|
|
invalid utf8.
|
|
* Automatically detect when a ssh remote does not have git-annex-shell
|
|
installed, and set annex-ignore.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 12 Oct 2012 13:45:21 -0400
|
|
|
|
git-annex (3.20121009) unstable; urgency=low
|
|
|
|
* watch, assistant: It's now safe to git annex unlock files while
|
|
the watcher is running, as well as modify files checked into git
|
|
as normal files. Additionally, .gitignore settings are now honored.
|
|
Closes: #689979
|
|
* group, ungroup: New commands to indicate groups of repositories.
|
|
* webapp: Adds newly created repositories to one of these groups:
|
|
clients, drives, servers
|
|
* vicfg: New command, allows editing (or simply viewing) most
|
|
of the repository configuration settings stored in the git-annex branch.
|
|
* Added preferred content expressions, configurable using vicfg.
|
|
* get --auto: If the local repository has preferred content
|
|
configured, only get that content.
|
|
* drop --auto: If the repository the content is dropped from has
|
|
preferred content configured, drop only content that is not preferred.
|
|
* copy --auto: Only transfer content that the destination repository prefers.
|
|
* assistant: Now honors preferred content settings when deciding what to
|
|
transfer.
|
|
* --copies=group:number can now be used to match files that are present
|
|
in a specified number of repositories in a group.
|
|
* Added --smallerthan, --largerthan, and --inall limits.
|
|
* Only build-depend on libghc-clientsession-dev on arches that will have
|
|
the webapp.
|
|
* uninit: Unset annex.version. Closes: #689852
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 09 Oct 2012 15:13:23 -0400
|
|
|
|
git-annex (3.20121001) unstable; urgency=low
|
|
|
|
* fsck: Now has an incremental mode. Start a new incremental fsck pass
|
|
with git annex fsck --incremental. Now the fsck can be interrupted
|
|
as desired, and resumed with git annex fsck --more.
|
|
Thanks, Justin Azoff
|
|
* New --time-limit option, makes long git-annex commands stop after
|
|
a specified amount of time.
|
|
* fsck: New --incremental-schedule option which is nice for scheduling
|
|
eg, monthly incremental fsck runs in cron jobs.
|
|
* Fix fallback to ~/Desktop when xdg-user-dir is not available.
|
|
Closes: #688833
|
|
* S3: When using a shared cipher, S3 credentials are not stored encrypted
|
|
in the git repository, as that would allow anyone with access to
|
|
the repository access to the S3 account. Instead, they're stored
|
|
in a 600 mode file in the local git repo.
|
|
* webapp: Avoid crashing when ssh-keygen -F chokes on an invalid known_hosts
|
|
file.
|
|
* Always do a system wide installation when DESTDIR is set. Closes: #689052
|
|
* The Makefile now builds with the new yesod by default.
|
|
Systems like Debian that have the old yesod 1.0.1 should set
|
|
GIT_ANNEX_LOCAL_FEATURES=-DWITH_OLD_YESOD
|
|
* copy: Avoid updating the location log when no copy is performed.
|
|
* configure: Test that uuid -m works, falling back to plain uuid if not.
|
|
* Avoid building the webapp on Debian architectures that do not yet
|
|
have template haskell and thus yesod. (Should be available for arm soonish
|
|
I hope).
|
|
|
|
-- Joey Hess <joeyh@debian.org> Mon, 01 Oct 2012 13:56:55 -0400
|
|
|
|
git-annex (3.20120924) unstable; urgency=low
|
|
|
|
* assistant: New command, a daemon which does everything watch does,
|
|
as well as automatically syncing file contents between repositories.
|
|
* webapp: An interface for managing and configuring the assistant.
|
|
* The default backend used when adding files to the annex is changed
|
|
from SHA256 to SHA256E, to simplify interoperability with OSX, media
|
|
players, and various programs that needlessly look at symlink targets.
|
|
To get old behavior, add a .gitattributes containing: * annex.backend=SHA256
|
|
* init: If no description is provided for a new repository, one will
|
|
automatically be generated, like "joey@gnu:~/foo"
|
|
* test: Set a lot of git environment variables so testing works in strange
|
|
environments that normally need git config to set names, etc.
|
|
Closes: #682351 Thanks, gregor herrmann
|
|
* Disable ssh connection caching if the path to the control socket would be
|
|
too long (and use relative path to minimise path to the control socket).
|
|
* migrate: Check content before generating the new key, to avoid generating
|
|
a key for corrupt data.
|
|
* Support repositories created with --separate-git-dir. Closes: #684405
|
|
* reinject: When the provided file doesn't match, leave it where it is,
|
|
rather than moving to .git/annex/bad/
|
|
* Avoid crashing on encoding errors in filenames when writing transfer info
|
|
files and reading from checksum commands.
|
|
* sync: Pushes the git-annex branch to remote/synced/git-annex, rather
|
|
than directly to remote/git-annex.
|
|
* Now supports matching files that are present on a number of remotes
|
|
with a specified trust level. Example: --copies=trusted:2
|
|
Thanks, Nicolas Pouillard
|
|
|
|
-- Joey Hess <joeyh@debian.org> Mon, 24 Sep 2012 13:47:48 -0400
|
|
|
|
git-annex (3.20120825) unstable; urgency=low
|
|
|
|
* S3: Add fileprefix setting.
|
|
* Pass --use-agent to gpg when in no tty mode. Thanks, Eskild Hustvedt.
|
|
* Bugfix: Fix fsck in SHA*E backends, when the key contains composite
|
|
extensions, as added in 3.20120721.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sat, 25 Aug 2012 10:00:10 -0400
|
|
|
|
git-annex (3.20120807) unstable; urgency=low
|
|
|
|
* initremote: Avoid recording remote's description before checking
|
|
that its config is valid.
|
|
* unused, status: Avoid crashing when ran in bare repo.
|
|
* Avoid crashing when "git annex get" fails to download from one
|
|
location, and falls back to downloading from a second location.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 07 Aug 2012 13:35:07 -0400
|
|
|
|
git-annex (3.20120721) unstable; urgency=low
|
|
|
|
* get, move, copy: Now refuse to do anything when the requested file
|
|
transfer is already in progress by another process.
|
|
* status: Lists transfers that are currently in progress.
|
|
* Fix passing --uuid to git-annex-shell.
|
|
* When shaNsum commands cannot be found, use the Haskell SHA library
|
|
(already a dependency) to do the checksumming. This may be slower,
|
|
but avoids portability problems.
|
|
* Use SHA library for files less than 50 kb in size, at which point it's
|
|
faster than forking the more optimised external program.
|
|
* SHAnE backends are now smarter about composite extensions, such as
|
|
.tar.gz Closes: #680450
|
|
* map: Write map.dot to .git/annex, which avoids watch trying to annex it.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sat, 21 Jul 2012 16:52:48 -0400
|
|
|
|
git-annex (3.20120629) unstable; urgency=low
|
|
|
|
* cabal: Only try to use inotify on Linux.
|
|
* Version build dependency on STM, and allow building without it,
|
|
which disables the watch command.
|
|
* Avoid ugly failure mode when moving content from a local repository
|
|
that is not available.
|
|
* Got rid of the last place that did utf8 decoding.
|
|
* Accept arbitrarily encoded repository filepaths etc when reading
|
|
git config output. This fixes support for remotes with unusual characters
|
|
in their names.
|
|
* sync: Automatically resolves merge conflicts.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 29 Jun 2012 10:17:49 -0400
|
|
|
|
git-annex (3.20120624) unstable; urgency=low
|
|
|
|
* watch: New subcommand, a daemon which notices changes to
|
|
files and automatically annexes new files, etc, so you don't
|
|
need to manually run git commands when manipulating files.
|
|
Available on Linux, BSDs, and OSX!
|
|
* Enable diskfree on kfreebsd, using kqueue.
|
|
* unused: Fix crash when key names contain invalid utf8.
|
|
* sync: Avoid recent git's interactive merge.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sun, 24 Jun 2012 12:36:50 -0400
|
|
|
|
git-annex (3.20120614) unstable; urgency=medium
|
|
|
|
* addurl: Was broken by a typo introduced 2 released ago, now fixed.
|
|
Closes: #677576
|
|
* Install man page when run by cabal, in a location where man will
|
|
find it, even when installing under $HOME. Thanks, Nathan Collins
|
|
|
|
-- Joey Hess <joeyh@debian.org> Thu, 14 Jun 2012 20:21:29 -0400
|
|
|
|
git-annex (3.20120611) unstable; urgency=medium
|
|
|
|
* add: Prevent (most) modifications from being made to a file while it
|
|
is being added to the annex.
|
|
* initremote: Automatically describe a remote when creating it.
|
|
* uninit: Refuse to run in a subdirectory. Closes: #677076
|
|
|
|
-- Joey Hess <joeyh@debian.org> Mon, 11 Jun 2012 10:32:01 -0400
|
|
|
|
git-annex (3.20120605) unstable; urgency=low
|
|
|
|
* sync: Show a nicer message if a user tries to sync to a special remote.
|
|
* lock: Reset unlocked file to index, rather than to branch head.
|
|
* import: New subcommand, pulls files from a directory outside the annex
|
|
and adds them.
|
|
* Fix display of warning message when encountering a file that uses an
|
|
unsupported backend.
|
|
* Require that the SHA256 backend can be used when building, since it's the
|
|
default.
|
|
* Preserve parent environment when running hooks of the hook special remote.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 05 Jun 2012 14:03:39 -0400
|
|
|
|
git-annex (3.20120522) unstable; urgency=low
|
|
|
|
* Pass -a to cp even when it supports --reflink=auto, to preserve
|
|
permissions.
|
|
* Clean up handling of git directory and git worktree.
|
|
* Add support for core.worktree, and fix support for GIT_WORK_TREE and
|
|
GIT_DIR.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 22 May 2012 11:16:13 -0400
|
|
|
|
git-annex (3.20120511) unstable; urgency=low
|
|
|
|
* Rsync special remotes can be configured with shellescape=no
|
|
to avoid shell quoting that is normally done when using rsync over ssh.
|
|
This is known to be needed for certian rsync hosting providers
|
|
(specificially hidrive.strato.com) that use rsync over ssh but do not
|
|
pass it through the shell.
|
|
* dropunused: Allow specifying ranges to drop.
|
|
* addunused: New command, the opposite of dropunused, it relinks unused
|
|
content into the git repository.
|
|
* Fix use of several config settings: annex.ssh-options,
|
|
annex.rsync-options, annex.bup-split-options. (And adjust types to avoid
|
|
the bugs that broke several config settings.)
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 11 May 2012 12:29:30 -0400
|
|
|
|
git-annex (3.20120430) unstable; urgency=low
|
|
|
|
* Fix use of annex.diskreserve config setting.
|
|
* Directory special remotes now check annex.diskreserve.
|
|
* Support git's core.sharedRepository configuration.
|
|
* Add annex.http-headers and annex.http-headers-command config
|
|
settings, to allow custom headers to be sent with all HTTP requests.
|
|
(Requested by the Internet Archive)
|
|
* uninit: Clear annex.uuid from .git/config. Closes: #670639
|
|
* Added shared cipher mode to encryptable special remotes. This option
|
|
avoids gpg key distribution, at the expense of flexability, and with
|
|
the requirement that all clones of the git repository be equally trusted.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Mon, 30 Apr 2012 13:16:10 -0400
|
|
|
|
git-annex (3.20120418) unstable; urgency=low
|
|
|
|
* bugfix: Adding a dotfile also caused all non-dotfiles to be added.
|
|
* bup: Properly handle key names with spaces or other things that are
|
|
not legal git refs.
|
|
* git-annex (but not git-annex-shell) supports the git help.autocorrect
|
|
configuration setting, doing fuzzy matching using the restricted
|
|
Damerau-Levenshtein edit distance, just as git does. This adds a build
|
|
dependency on the haskell edit-distance library.
|
|
* Renamed diskfree.c to avoid OSX case insensativity bug.
|
|
* cabal now installs git-annex-shell as a symlink to git-annex.
|
|
* cabal file now autodetects whether S3 support is available.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Wed, 18 Apr 2012 12:11:32 -0400
|
|
|
|
git-annex (3.20120406) unstable; urgency=low
|
|
|
|
* Disable diskfree on kfreebsd, as I have a build failure on kfreebsd-i386
|
|
that is quite likely caused by it.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sat, 07 Apr 2012 15:50:36 -0400
|
|
|
|
git-annex (3.20120405) unstable; urgency=low
|
|
|
|
* Rewrote free disk space checking code, moving the portability
|
|
handling into a small C library.
|
|
* status: Display amount of free disk space.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Thu, 05 Apr 2012 16:19:10 -0400
|
|
|
|
git-annex (3.20120315) unstable; urgency=low
|
|
|
|
* fsck: Fix up any broken links and misplaced content caused by the
|
|
directory hash calculation bug fixed in the last release.
|
|
* sync: Sync to lower cost remotes first.
|
|
* status: Fixed to run in constant space.
|
|
* status: More accurate display of sizes of tmp and bad keys.
|
|
* unused: Now uses a bloom filter, and runs in constant space.
|
|
Use of a bloom filter does mean it will not notice a small
|
|
number of unused keys. For repos with up to half a million keys,
|
|
it will miss one key in 1000.
|
|
* Added annex.bloomcapacity and annex.bloomaccuracy, which can be
|
|
adjusted as desired to tune the bloom filter.
|
|
* status: Display amount of memory used by bloom filter, and
|
|
detect when it's too small for the number of keys in a repository.
|
|
* git-annex-shell: Runs hooks/annex-content after content is received
|
|
or dropped.
|
|
* Work around a bug in rsync (IMHO) introduced by openSUSE's SIP patch.
|
|
* git-annex now behaves as git-annex-shell if symlinked to and run by that
|
|
name. The Makefile sets this up, saving some 8 mb of installed size.
|
|
* git-union-merge is a demo program, so it is no longer built by default.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Thu, 15 Mar 2012 11:05:28 -0400
|
|
|
|
git-annex (3.20120309) unstable; urgency=low
|
|
|
|
* Fix key directory hash calculation code to behave as it did before
|
|
version 3.20120227 when a key contains non-ascii characters (only
|
|
WORM backend is likely to have been affected).
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 09 Mar 2012 20:05:09 -0400
|
|
|
|
git-annex (3.20120230) unstable; urgency=low
|
|
|
|
* "here" can be used to refer to the current repository,
|
|
which can read better than the old "." (which still works too).
|
|
* Directory special remotes now support chunking files written to them,
|
|
avoiding writing files larger than a specified size.
|
|
* Add progress bar display to the directory special remote.
|
|
* Add configurable hooks that are run when git-annex starts and stops
|
|
using a remote: remote.name.annex-start-command and
|
|
remote.name.annex-stop-command
|
|
* Fix a bug in symlink calculation code, that triggered in rare
|
|
cases where an annexed file is in a subdirectory that nearly
|
|
matched to the .git/annex/object/xx/yy subdirectories.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Mon, 05 Mar 2012 13:38:13 -0400
|
|
|
|
git-annex (3.20120229) unstable; urgency=low
|
|
|
|
* Fix test suite to not require a unicode locale.
|
|
* Fix cabal build failure. Thanks, Sergei Trofimovich
|
|
|
|
-- Joey Hess <joeyh@debian.org> Wed, 29 Feb 2012 02:31:31 -0400
|
|
|
|
git-annex (3.20120227) unstable; urgency=low
|
|
|
|
* Modifications to support ghc 7.4's handling of filenames.
|
|
This version can only be built with ghc 7.4 or newer. See the ghc7.0
|
|
branch for older ghcs.
|
|
* S3: Fix irrefutable pattern failure when accessing encrypted S3
|
|
credentials.
|
|
* Use the haskell IfElse library.
|
|
* Fix teardown of stale cached ssh connections.
|
|
* Fixed to use the strict state monad, to avoid leaking all kinds of memory
|
|
due to lazy state update thunks when adding/fixing many files.
|
|
* Fixed some memory leaks that occurred when committing journal files.
|
|
* Added a annex.queuesize setting, useful when adding hundreds of thousands
|
|
of files on a system with plenty of memory.
|
|
* whereis: Prints the urls of files that the web special remote knows about.
|
|
* addurl --fast: Verifies that the url can be downloaded (only getting
|
|
its head), and records the size in the key.
|
|
* When checking that an url has a key, verify that the Content-Length,
|
|
if available, matches the size of the key.
|
|
* addurl: Added a --file option, which can be used to specify what
|
|
file the url is added to. This can be used to override the default
|
|
filename that is used when adding an url, which is based on the url.
|
|
Or, when the file already exists, the url is recorded as another
|
|
location of the file.
|
|
* addurl: Normalize badly encoded urls.
|
|
* addurl: Add --pathdepth option.
|
|
* rekey: New plumbing level command, can be used to change the keys used
|
|
for files en masse.
|
|
* Store web special remote url info in a more efficient location.
|
|
(Urls stored with this version will not be visible to older versions.)
|
|
* Deal with NFS problem that caused a failure to remove a directory
|
|
when removing content from the annex.
|
|
* Make a single location log commit after a remote has received or
|
|
dropped files. Uses a new "git-annex-shell commit" command when available.
|
|
* To avoid commits of data to the git-annex branch after each command
|
|
is run, set annex.alwayscommit=false. Its data will then be committed
|
|
less frequently, when a merge or sync is done.
|
|
* configure: Check if ssh connection caching is supported by the installed
|
|
version of ssh and default annex.sshcaching accordingly.
|
|
* move --from, copy --from: Now 10 times faster when scanning to find
|
|
files in a remote on a local disk; rather than go through the location log
|
|
to see which files are present on the remote, it simply looks at the
|
|
disk contents directly.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Mon, 27 Feb 2012 12:58:21 -0400
|
|
|
|
git-annex (3.20120123) unstable; urgency=low
|
|
|
|
* fsck --from: Fscking a remote is now supported. It's done by retrieving
|
|
the contents of the specified files from the remote, and checking them,
|
|
so can be an expensive operation. Still, if the remote is a special
|
|
remote, or a git repository that you cannot run fsck in locally, it's
|
|
nice to have the ability to fsck it.
|
|
* If you have any directory special remotes, now would be a good time to
|
|
fsck them, in case you were hit by the data loss bug fixed in the
|
|
previous release!
|
|
* fsck --from remote --fast: Avoids expensive file transfers, at the
|
|
expense of not checking file size and/or contents.
|
|
* Ssh connection caching is now enabled automatically by git-annex.
|
|
Only one ssh connection is made to each host per git-annex run, which
|
|
can speed some things up a lot, as well as avoiding repeated password
|
|
prompts. Concurrent git-annex processes also share ssh connections.
|
|
Cached ssh connections are shut down when git-annex exits.
|
|
* To disable the ssh caching (if for example you have your own broader
|
|
ssh caching configuration), set annex.sshcaching=false.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Mon, 23 Jan 2012 13:48:48 -0400
|
|
|
|
git-annex (3.20120116) unstable; urgency=medium
|
|
|
|
* Fix data loss bug in directory special remote, when moving a file
|
|
to the remote failed, and partially transferred content was left
|
|
behind in the directory, re-running the same move would think it
|
|
succeeded and delete the local copy.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Mon, 16 Jan 2012 16:43:45 -0400
|
|
|
|
git-annex (3.20120115) unstable; urgency=low
|
|
|
|
* Add a sanity check for bad StatFS results. On architectures
|
|
where StatFS does not currently work (s390, mips, powerpc, sparc),
|
|
this disables the diskreserve checking code, and attempting to
|
|
configure an annex.diskreserve will result in an error.
|
|
* Fix QuickCheck dependency in cabal file.
|
|
* Minor optimisations.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sun, 15 Jan 2012 13:54:20 -0400
|
|
|
|
git-annex (3.20120113) unstable; urgency=low
|
|
|
|
* log: Add --gource mode, which generates output usable by gource.
|
|
* map: Fix display of remote repos
|
|
* Add annex-trustlevel configuration settings, which can be used to
|
|
override the trust level of a remote.
|
|
* git-annex, git-union-merge: Support GIT_DIR and GIT_WORK_TREE.
|
|
* Add libghc-testpack-dev to build depends on all arches.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 13 Jan 2012 15:35:17 -0400
|
|
|
|
git-annex (3.20120106) unstable; urgency=low
|
|
|
|
* Support unescaped repository urls, like git does.
|
|
* log: New command that displays the location log for files,
|
|
showing each repository they were added to and removed from.
|
|
* Fix overbroad gpg --no-tty fix from last release.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sat, 07 Jan 2012 13:16:23 -0400
|
|
|
|
git-annex (3.20120105) unstable; urgency=low
|
|
|
|
* Added annex-web-options configuration settings, which can be
|
|
used to provide parameters to whichever of wget or curl git-annex uses
|
|
(depends on which is available, but most of their important options
|
|
suitable for use here are the same).
|
|
* Dotfiles, and files inside dotdirs are not added by "git annex add"
|
|
unless the dotfile or directory is explicitly listed. So "git annex add ."
|
|
will add all untracked files in the current directory except for those in
|
|
dotdirs.
|
|
* Added quickcheck to build dependencies, and fail if test suite cannot be
|
|
built.
|
|
* fsck: Do backend-specific check before checking numcopies is satisfied.
|
|
* Run gpg with --no-tty. Closes: #654721
|
|
|
|
-- Joey Hess <joeyh@debian.org> Thu, 05 Jan 2012 13:44:12 -0400
|
|
|
|
git-annex (3.20111231) unstable; urgency=low
|
|
|
|
* sync: Improved to work well without a central bare repository.
|
|
Thanks to Joachim Breitner.
|
|
* Rather than manually committing, pushing, pulling, merging, and git annex
|
|
merging, we encourage you to give "git annex sync" a try.
|
|
* sync --fast: Selects some of the remotes with the lowest annex.cost
|
|
and syncs those, in addition to any specified at the command line.
|
|
* Union merge now finds the least expensive way to represent the merge.
|
|
* reinject: Add a sanity check for using an annexed file as the source file.
|
|
* Properly handle multiline git config values.
|
|
* Fix the hook special remote, which bitrotted a while ago.
|
|
* map: --fast disables use of dot to display map
|
|
* Test suite improvements. Current top-level test coverage: 75%
|
|
* Improve deletion of files from rsync special remotes. Closes: #652849
|
|
* Add --include, which is the same as --not --exclude.
|
|
* Format strings can be specified using the new --format option, to control
|
|
what is output by git annex find.
|
|
* Support git annex find --json
|
|
* Fixed behavior when multiple insteadOf configs are provided for the
|
|
same url base.
|
|
* Can now be built with older git versions (before 1.7.7); the resulting
|
|
binary should only be used with old git.
|
|
* Updated to build with monad-control 0.3.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sat, 31 Dec 2011 14:55:29 -0400
|
|
|
|
git-annex (3.20111211) unstable; urgency=medium
|
|
|
|
* Fix bug in last version in getting contents from bare repositories.
|
|
* Ensure that git-annex branch changes are merged into git-annex's index,
|
|
which fixes a bug that could cause changes that were pushed to the
|
|
git-annex branch to get reverted. As a side effect, it's now safe
|
|
for users to check out and commit changes directly to the git-annex
|
|
branch.
|
|
* map: Fix a failure to detect a loop when both repositories are local
|
|
and refer to each other with relative paths.
|
|
* Prevent key names from containing newlines.
|
|
* add: If interrupted, add can leave files converted to symlinks but not
|
|
yet added to git. Running the add again will now clean up this situtation.
|
|
* Fix caching of decrypted ciphers, which failed when drop had to check
|
|
multiple different encrypted special remotes.
|
|
* unannex: Can be run on files that have been added to the annex, but not
|
|
yet committed.
|
|
* sync: New command that synchronises the local repository and default
|
|
remote, by running git commit, pull, and push for you.
|
|
* Version monad-control dependency in cabal file.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sun, 11 Dec 2011 21:24:39 -0400
|
|
|
|
git-annex (3.20111203) unstable; urgency=low
|
|
|
|
* The VFAT filesystem on recent versions of Linux, when mounted with
|
|
shortname=mixed, does not get along well with git-annex's mixed case
|
|
.git/annex/objects hash directories. To avoid this problem, new content
|
|
is now stored in all-lowercase hash directories. Except for non-bare
|
|
repositories which would be a pain to transition and cannot be put on FAT.
|
|
(Old mixed-case hash directories are still tried for backwards
|
|
compatibility.)
|
|
* Flush json output, avoiding a buffering problem that could result in
|
|
doubled output.
|
|
* Avoid needing haskell98 and other fixes for new ghc. Thanks, Mark Wright.
|
|
* Bugfix: dropunused did not drop keys with two spaces in their name.
|
|
* Support for storing .git/annex on a different device than the rest of the
|
|
git repository.
|
|
* --inbackend can be used to make git-annex only operate on files
|
|
whose content is stored using a specified key-value backend.
|
|
* dead: A command which says that a repository is gone for good
|
|
and you don't want git-annex to mention it again.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sat, 03 Dec 2011 21:01:45 -0400
|
|
|
|
git-annex (3.20111122) unstable; urgency=low
|
|
|
|
* merge: Improve commit messages to mention what was merged.
|
|
* Avoid doing auto-merging in commands that don't need fully current
|
|
information from the git-annex branch. In particular, git annex add
|
|
no longer needs to auto-merge.
|
|
* init: When run in an already initalized repository, and without
|
|
a description specified, don't delete the old description.
|
|
* Optimised union merging; now only runs git cat-file once, and runs
|
|
in constant space.
|
|
* status: Now displays trusted, untrusted, and semitrusted repositories
|
|
separately.
|
|
* status: Include all special remotes in the list of repositories.
|
|
* status: Fix --json mode.
|
|
* status: --fast is back
|
|
* Fix support for insteadOf url remapping. Closes: #644278
|
|
* When not run in a git repository, git-annex can still display a usage
|
|
message, and "git annex version" even works.
|
|
* migrate: Don't fall over a stale temp file.
|
|
* Avoid excessive escaping for rsync special remotes that are not accessed
|
|
over ssh.
|
|
* find: Support --print0
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 22 Nov 2011 14:31:45 -0400
|
|
|
|
git-annex (3.20111111) unstable; urgency=low
|
|
|
|
* Handle a case where an annexed file is moved into a gitignored directory,
|
|
by having fix --force add its change.
|
|
* Avoid cyclic drop problems.
|
|
* Optimized copy --from and get --from to avoid checking the location log
|
|
for files that are already present.
|
|
* Automatically fix up badly formatted uuid.log entries produced by
|
|
3.20111105, whenever the uuid.log is changed (ie, by init or describe).
|
|
* map: Support remotes with /~/ and /~user/
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 11 Nov 2011 13:44:18 -0400
|
|
|
|
git-annex (3.20111107) unstable; urgency=low
|
|
|
|
* merge: Use fast-forward merges when possible.
|
|
Thanks Valentin Haenel for a test case showing how non-fast-forward
|
|
merges could result in an ongoing pull/merge/push cycle.
|
|
* Don't try to read config from repos with annex-ignore set.
|
|
* Bugfix: In the past two releases, git-annex init has written the uuid.log
|
|
in the wrong format, with the UUID and description flipped.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Mon, 07 Nov 2011 12:47:44 -0400
|
|
|
|
git-annex (3.20111105) unstable; urgency=low
|
|
|
|
* The default backend used when adding files to the annex is changed
|
|
from WORM to SHA256.
|
|
To get old behavior, add a .gitattributes containing: * annex.backend=WORM
|
|
* Sped up some operations on remotes that are on the same host.
|
|
* copy --to: Fixed leak when copying many files to a remote on the same
|
|
host.
|
|
* uninit: Add guard against being run with the git-annex branch checked out.
|
|
* Fail if --from or --to is passed to commands that do not support them.
|
|
* drop --from is now supported to remove file content from a remote.
|
|
* status: Now always shows the current repository, even when it does not
|
|
appear in uuid.log.
|
|
* fsck: Now works in bare repositories. Checks location log information,
|
|
and file contents. Does not check that numcopies is satisfied, as
|
|
.gitattributes information about numcopies is not available in a bare
|
|
repository.
|
|
* unused, dropunused: Now work in bare repositories.
|
|
* Removed the setkey command, and added a reinject command with a more
|
|
useful interface.
|
|
* The fromkey command now takes the key as its first parameter. The --key
|
|
option is no longer used.
|
|
* Built without any filename containing .git being excluded. Closes: #647215
|
|
* Record uuid when auto-initializing a remote so it shows in status.
|
|
* Bugfix: Fixed git-annex init crash in a bare repository when there was
|
|
already an existing git-annex branch.
|
|
* Pass -t to rsync to preserve timestamps.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sat, 05 Nov 2011 15:47:52 -0400
|
|
|
|
git-annex (3.20111025) unstable; urgency=low
|
|
|
|
* A remote can have a annexUrl configured, that is used by git-annex
|
|
instead of its usual url. (Similar to pushUrl.)
|
|
* migrate: Copy url logs for keys when migrating.
|
|
* git-annex-shell: GIT_ANNEX_SHELL_READONLY and GIT_ANNEX_SHELL_LIMITED
|
|
environment variables can be set to limit what commands can be run.
|
|
This is used by gitolite's new git-annex support!
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 25 Oct 2011 13:03:08 -0700
|
|
|
|
git-annex (3.20111011) unstable; urgency=low
|
|
|
|
* This version of git-annex only works with git 1.7.7 and newer.
|
|
The breakage with old versions is subtle, and affects the
|
|
annex.numcopies settings in .gitattributes, so be sure to upgrade git
|
|
to 1.7.7. (Debian package now depends on that version.)
|
|
* Don't pass absolute paths to git show-attr, as it started following
|
|
symlinks when that's done in 1.7.7. Instead, use relative paths,
|
|
which show-attr only handles 100% correctly in 1.7.7. Closes: #645046
|
|
* Fix referring to remotes by uuid.
|
|
* New or changed repository descriptions in uuid.log now have a timestamp,
|
|
which is used to ensure the newest description is used when the uuid.log
|
|
has been merged.
|
|
* Note that older versions of git-annex will display the timestamp as part
|
|
of the repository description, which is ugly but otherwise harmless.
|
|
* Add timestamps to trust.log and remote.log too.
|
|
* git-annex-shell: Added the --uuid option.
|
|
* git-annex now asks git-annex-shell to verify that it's operating in
|
|
the expected repository.
|
|
* Note that this git-annex will not interoperate with remotes using
|
|
older versions of git-annex-shell.
|
|
* Now supports git's insteadOf configuration, to modify the url
|
|
used to access a remote. Note that pushInsteadOf is not used;
|
|
that and pushurl are reserved for actual git pushes. Closes: #644278
|
|
* status: List all known repositories.
|
|
* When displaying a list of repositories, show git remote names
|
|
in addition to their descriptions.
|
|
* Add locking to avoid races when changing the git-annex branch.
|
|
* Various speed improvements gained by using ByteStrings.
|
|
* Contain the zombie hordes.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 11 Oct 2011 23:00:02 -0400
|
|
|
|
git-annex (3.20110928) unstable; urgency=low
|
|
|
|
* --in can be used to make git-annex only operate on files
|
|
believed to be present in a given repository.
|
|
* Arbitrarily complex expressions can be built to limit the files git-annex
|
|
operates on, by combining the options --not --and --or -( and -)
|
|
Example: git annex get --exclude '*.mp3' --and --not -( --in usbdrive --or --in archive -)
|
|
* --copies=N can be used to make git-annex only operate on files with
|
|
the specified number of copies. (And --not --copies=N for the inverse.)
|
|
* find: Rather than only showing files whose contents are present,
|
|
when used with --exclude --copies or --in, displays all files that
|
|
match the specified conditions.
|
|
* Note that this is a behavior change for git-annex find! Old behavior
|
|
can be gotten by using: git-annex find --in .
|
|
* status: Massively sped up; remove --fast mode.
|
|
* unused: File contents used by branches and tags are no longer
|
|
considered unused, even when not used by the current branch. This is
|
|
the final piece of the puzzle needed for git-annex to to play nicely
|
|
with branches.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Wed, 28 Sep 2011 18:14:02 -0400
|
|
|
|
git-annex (3.20110915) unstable; urgency=low
|
|
|
|
* whereis: Show untrusted locations separately and do not include in
|
|
location count.
|
|
* Fix build without S3.
|
|
* addurl: Always use whole url as destination filename, rather than
|
|
only its file component.
|
|
* get, drop, copy: Added --auto option, which decides whether
|
|
to get/drop content as needed to work toward the configured numcopies.
|
|
* bugfix: drop and fsck did not honor --exclude
|
|
|
|
-- Joey Hess <joeyh@debian.org> Thu, 15 Sep 2011 22:25:46 -0400
|
|
|
|
git-annex (3.20110906) unstable; urgency=low
|
|
|
|
* Improve display of newlines around error and warning messages.
|
|
* Fix Makefile to work with cabal again.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 06 Sep 2011 13:45:16 -0400
|
|
|
|
git-annex (3.20110902) unstable; urgency=low
|
|
|
|
* Set EMAIL when running test suite so that git does not need to be
|
|
configured first. Closes: #638998
|
|
* The wget command will now be used in preference to curl, if available.
|
|
* init: Make description an optional parameter.
|
|
* unused, status: Sped up by avoiding unnecessary stats of annexed files.
|
|
* unused --remote: Reduced memory use to 1/4th what was used before.
|
|
* Add --json switch, to produce machine-consumable output.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 02 Sep 2011 21:20:37 -0400
|
|
|
|
git-annex (3.20110819) unstable; urgency=low
|
|
|
|
* Now "git annex init" only has to be run once, when a git repository
|
|
is first being created. Clones will automatically notice that git-annex
|
|
is in use and automatically perform a basic initalization. It's
|
|
still recommended to run "git annex init" in any clones, to describe them.
|
|
* Added annex-cost-command configuration, which can be used to vary the
|
|
cost of a remote based on the output of a shell command.
|
|
* Fix broken upgrade from V1 repository. Closes: #638584
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 19 Aug 2011 20:34:09 -0400
|
|
|
|
git-annex (3.20110817) unstable; urgency=low
|
|
|
|
* Fix shell escaping in rsync special remote.
|
|
* addurl: --fast can be used to avoid immediately downloading the url.
|
|
* Added support for getting content from git remotes using http (and https).
|
|
* Added curl to Debian package dependencies.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Wed, 17 Aug 2011 01:29:02 -0400
|
|
|
|
git-annex (3.20110719) unstable; urgency=low
|
|
|
|
* add: Be even more robust to avoid ever leaving the file seemingly deleted.
|
|
Closes: #634233
|
|
* Bugfix: Make add ../ work.
|
|
* Support the standard git -c name=value
|
|
* unannex: Clean up use of git commit -a.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 19 Jul 2011 23:39:53 -0400
|
|
|
|
git-annex (3.20110707) unstable; urgency=low
|
|
|
|
* Fix sign bug in disk free space checking.
|
|
* Bugfix: Forgot to de-escape keys when upgrading. Could result in
|
|
bad location log data for keys that contain [&:%] in their names.
|
|
(A workaround for this problem is to run git annex fsck.)
|
|
* add: Avoid a failure mode that resulted in the file seemingly being
|
|
deleted (content put in the annex but no symlink present).
|
|
|
|
-- Joey Hess <joeyh@debian.org> Thu, 07 Jul 2011 19:29:39 -0400
|
|
|
|
git-annex (3.20110705) unstable; urgency=low
|
|
|
|
* uninit: Delete the git-annex branch and .git/annex/
|
|
* unannex: In --fast mode, file content is left in the annex, and a
|
|
hard link made to it.
|
|
* uninit: Use unannex in --fast mode, to support unannexing multiple
|
|
files that link to the same content.
|
|
* Drop the dependency on the haskell curl bindings, use regular haskell HTTP.
|
|
* Fix a pipeline stall when upgrading (caused by #624389).
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 05 Jul 2011 14:37:39 -0400
|
|
|
|
git-annex (3.20110702) unstable; urgency=low
|
|
|
|
* Now the web can be used as a special remote.
|
|
This feature replaces the old URL backend.
|
|
* addurl: New command to download an url and store it in the annex.
|
|
* Sped back up fsck, copy --from, and other commands that often
|
|
have to read a lot of information from the git-annex branch. Such
|
|
commands are now faster than they were before introduction of the
|
|
git-annex branch.
|
|
* Always ensure git-annex branch exists.
|
|
* Modify location log parser to allow future expansion.
|
|
* --force will cause add, etc, to operate on ignored files.
|
|
* Avoid mangling encoding when storing the description of repository
|
|
and other content.
|
|
* cabal can now be used to build git-annex. This is substantially
|
|
slower than using make, does not build or install documentation,
|
|
does not run the test suite, and is not particularly recommended,
|
|
but could be useful to some.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sat, 02 Jul 2011 15:00:18 -0400
|
|
|
|
git-annex (3.20110624) experimental; urgency=low
|
|
|
|
* New repository format, annex.version=3. Use `git annex upgrade` to migrate.
|
|
* git-annex now stores its logs in a git-annex branch.
|
|
* merge: New subcommand. Auto-merges the new git-annex branch.
|
|
* Improved handling of bare git repos with annexes. Many more commands will
|
|
work in them.
|
|
* git-annex is now more robust; it will never leave state files
|
|
uncommitted when some other git process comes along and locks the index
|
|
at an inconvenient time.
|
|
* rsync is now used when copying files from repos on other filesystems.
|
|
cp is still used when copying file from repos on the same filesystem,
|
|
since --reflink=auto can make it significantly faster on filesystems
|
|
such as btrfs.
|
|
* Allow --trust etc to specify a repository by name, for temporarily
|
|
trusting repositories that are not configured remotes.
|
|
* unlock: Made atomic.
|
|
* git-union-merge: New git subcommand, that does a generic union merge
|
|
operation, and operates efficiently without touching the working tree.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 24 Jun 2011 14:32:18 -0400
|
|
|
|
git-annex (0.20110610) unstable; urgency=low
|
|
|
|
* Add --numcopies option.
|
|
* Add --trust, --untrust, and --semitrust options.
|
|
* get --from is the same as copy --from
|
|
* Bugfix: Fix fsck to not think all SHAnE keys are bad.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 10 Jun 2011 11:48:40 -0400
|
|
|
|
git-annex (0.20110601) unstable; urgency=low
|
|
|
|
* Minor bugfixes and error message improvements.
|
|
* Massively sped up `git annex lock` by avoiding use of the uber-slow
|
|
`git reset`, and only running `git checkout` once, even when many files
|
|
are being locked.
|
|
* Fix locking of files with staged changes.
|
|
* Somewhat sped up `git commit` of modifications to unlocked files.
|
|
* Build fix for older ghc.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Wed, 01 Jun 2011 11:50:47 -0400
|
|
|
|
git-annex (0.20110522) unstable; urgency=low
|
|
|
|
* Closer emulation of git's behavior when told to use "foo/.git" as a
|
|
git repository instead of just "foo". Closes: #627563
|
|
* Fix bug in --exclude introduced in 0.20110516.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 27 May 2011 20:20:41 -0400
|
|
|
|
git-annex (0.20110521) unstable; urgency=low
|
|
|
|
* status: New subcommand to show info about an annex, including its size.
|
|
* --backend now overrides any backend configured in .gitattributes files.
|
|
* Add --debug option. Closes: #627499
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sat, 21 May 2011 11:52:53 -0400
|
|
|
|
git-annex (0.20110516) unstable; urgency=low
|
|
|
|
* Add a few tweaks to make it easy to use the Internet Archive's variant
|
|
of S3. In particular, munge key filenames to comply with the IA's filename
|
|
limits, disable encryption, support their nonstandard way of creating
|
|
buckets, and allow x-archive-* headers to be specified in initremote to
|
|
set item metadata.
|
|
* Added filename extension preserving variant backends SHA1E, SHA256E, etc.
|
|
* migrate: Use current filename when generating new key, for backends
|
|
where the filename affects the key name.
|
|
* Work around a bug in Network.URI's handling of bracketed ipv6 addresses.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Mon, 16 May 2011 14:16:52 -0400
|
|
|
|
git-annex (0.20110503) unstable; urgency=low
|
|
|
|
* Fix hasKeyCheap setting for bup and rsync special remotes.
|
|
* Add hook special remotes.
|
|
* Avoid crashing when an existing key is readded to the annex.
|
|
* unused: Now also lists files fsck places in .git/annex/bad/
|
|
* S3: When encryption is enabled, the Amazon S3 login credentials
|
|
are stored, encrypted, in .git-annex/remotes.log, so environment
|
|
variables need not be set after the remote is initialized.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 03 May 2011 20:56:01 -0400
|
|
|
|
git-annex (0.20110427) unstable; urgency=low
|
|
|
|
* Switch back to haskell SHA library, so git-annex remains buildable on
|
|
Debian stable.
|
|
* Added rsync special remotes. This could be used, for example, to
|
|
store annexed content on rsync.net (encrypted naturally). Or anywhere else.
|
|
* Bugfix: Avoid pipeline stall when running git annex drop or fsck on a
|
|
lot of files. Possibly only occured with ghc 7.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Wed, 27 Apr 2011 22:50:26 -0400
|
|
|
|
git-annex (0.20110425) unstable; urgency=low
|
|
|
|
* Use haskell Crypto library instead of haskell SHA library.
|
|
* Remove testpack from build depends for non x86 architectures where it
|
|
is not available. The test suite will not be run if it cannot be compiled.
|
|
* Avoid using absolute paths when staging location log, as that can
|
|
confuse git when a remote's path contains a symlink. Closes: #621386
|
|
|
|
-- Joey Hess <joeyh@debian.org> Mon, 25 Apr 2011 15:47:00 -0400
|
|
|
|
git-annex (0.20110420) unstable; urgency=low
|
|
|
|
* Update Debian build dependencies for ghc 7.
|
|
* Debian package is now built with S3 support.
|
|
Thanks Joachim Breitner for making this possible.
|
|
* Somewhat improved memory usage of S3, still work to do.
|
|
Thanks Greg Heartsfield for ongoing work to improve the hS3 library
|
|
for git-annex.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Thu, 21 Apr 2011 15:00:48 -0400
|
|
|
|
git-annex (0.20110419) unstable; urgency=low
|
|
|
|
* Don't run gpg in batch mode, so it can prompt for passphrase when
|
|
there is no agent.
|
|
* Add missing build dep on dataenc.
|
|
* S3: Fix stalls when transferring encrypted data.
|
|
* bup: Avoid memory leak when transferring encrypted data.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 19 Apr 2011 21:26:51 -0400
|
|
|
|
git-annex (0.20110417) unstable; urgency=low
|
|
|
|
* bup is now supported as a special type of remote.
|
|
* The data sent to special remotes (Amazon S3, bup, etc) can be encrypted
|
|
using GPG for privacy.
|
|
* Use lowercase hash directories for locationlog files, to avoid
|
|
some issues with git on OSX with the mixed-case directories.
|
|
No migration is needed; the old mixed case hash directories are still
|
|
read; new information is written to the new directories.
|
|
* Unused files on remotes, particulary special remotes, can now be
|
|
identified and dropped, by using "--from remote" with git annex unused
|
|
and git annex dropunused.
|
|
* Clear up short option confusion between --from and --force (-f is now
|
|
--from, and there is no short option for --force).
|
|
* Add build depend on perlmagick so docs are consistently built.
|
|
Closes: #621410
|
|
* Add doc-base file. Closes: #621408
|
|
* Periodically flush git command queue, to avoid boating memory usage
|
|
too much.
|
|
* Support "sha1" and "sha512" commands on FreeBSD, and allow building
|
|
if any/all SHA commands are not available. Thanks, Fraser Tweedale
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sun, 17 Apr 2011 12:00:24 -0400
|
|
|
|
git-annex (0.20110401) experimental; urgency=low
|
|
|
|
* Amazon S3 is now supported as a special type of remote.
|
|
Warning: Encrypting data before sending it to S3 is not yet supported.
|
|
* Note that Amazon S3 support is not built in by default on Debian yet,
|
|
as hS3 is not packaged.
|
|
* fsck: Ensure that files and directories in .git/annex/objects
|
|
have proper permissions.
|
|
* Added a special type of remote called a directory remote, which
|
|
simply stores files in an arbitrary local directory.
|
|
* Bugfix: copy --to --fast never really copied, fixed.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 01 Apr 2011 21:27:22 -0400
|
|
|
|
git-annex (0.20110328) experimental; urgency=low
|
|
|
|
* annex.diskreserve can be given in arbitrary units (ie "0.5 gigabytes")
|
|
* Generalized remotes handling, laying groundwork for remotes that are
|
|
not regular git remotes. (Think Amazon S3.)
|
|
* Provide a less expensive version of `git annex copy --to`, enabled
|
|
via --fast. This assumes that location tracking information is correct,
|
|
rather than contacting the remote for every file.
|
|
* Bugfix: Keys could be received into v1 annexes from v2 annexes, via
|
|
v1 git-annex-shell. This results in some oddly named keys in the v1
|
|
annex. Recognise and fix those keys when upgrading, instead of crashing.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Mon, 28 Mar 2011 10:47:29 -0400
|
|
|
|
git-annex (0.20110325) experimental; urgency=low
|
|
|
|
* Free space checking is now done, for transfers of data for keys
|
|
that have free space metadata. (Notably, not for SHA* keys generated
|
|
with git-annex 0.2x or earlier.) The code is believed to work on
|
|
Linux, FreeBSD, and OSX; check compile-time messages to see if it
|
|
is not enabled for your OS.
|
|
* Add annex.diskreserve config setting, to control how much free space
|
|
to reserve for other purposes and avoid using (defaults to 1 mb).
|
|
* Add --fast flag, that can enable less expensive, but also less thorough
|
|
versions of some commands.
|
|
* fsck: In fast mode, avoid checking checksums.
|
|
* unused: In fast mode, just show all existing temp files as unused,
|
|
and avoid expensive scan for other unused content.
|
|
* migrate: Support migrating v1 SHA keys to v2 SHA keys with
|
|
size information that can be used for free space checking.
|
|
* Fix space leak in fsck and drop commands.
|
|
* migrate: Bugfix for case when migrating a file results in a key that
|
|
is already present in .git/annex/objects.
|
|
* dropunused: Significantly sped up; only read unused log file once.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 25 Mar 2011 00:47:37 -0400
|
|
|
|
git-annex (0.20110320) experimental; urgency=low
|
|
|
|
* Fix dropping of files using the URL backend.
|
|
* Fix support for remotes with '.' in their names.
|
|
* Add version command to show git-annex version as well as repository
|
|
version information.
|
|
* No longer auto-upgrade to repository format 2, to avoid accidental
|
|
upgrades, etc. Use git-annex upgrade when you're ready to run this
|
|
version.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sun, 20 Mar 2011 16:36:33 -0400
|
|
|
|
git-annex (0.20110316) experimental; urgency=low
|
|
|
|
* New repository format, annex.version=2.
|
|
* The first time git-annex is run in an old format repository, it
|
|
will automatically upgrade it to the new format, staging all
|
|
necessary changes to git. Also added a "git annex upgrade" command.
|
|
* Colons are now avoided in filenames, so bare clones of git repos
|
|
can be put on USB thumb drives formatted with vFAT or similar
|
|
filesystems.
|
|
* Added two levels of hashing to object directory and .git-annex logs,
|
|
to improve scalability with enormous numbers of annexed
|
|
objects. (With one hundred million annexed objects, each
|
|
directory would contain fewer than 1024 files.)
|
|
* The setkey, fromkey, and dropkey subcommands have changed how
|
|
the key is specified. --backend is no longer used with these.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Wed, 16 Mar 2011 16:20:23 -0400
|
|
|
|
git-annex (0.24) unstable; urgency=low
|
|
|
|
Branched the 0.24 series, which will be maintained for a while to
|
|
support v1 git-annex repos, while main development moves to the 0.2011
|
|
series, with v2 git-annex repos.
|
|
|
|
* Add Suggests on graphviz. Closes: #618039
|
|
* When adding files to the annex, the symlinks pointing at the annexed
|
|
content are made to have the same mtime as the original file.
|
|
While git does not preserve that information, this allows a tool
|
|
like metastore to be used with annexed files.
|
|
(Currently this is only done on systems supporting POSIX 200809.)
|
|
|
|
-- Joey Hess <joeyh@debian.org> Wed, 16 Mar 2011 18:35:13 -0400
|
|
|
|
git-annex (0.23) unstable; urgency=low
|
|
|
|
* Support ssh remotes with a port specified.
|
|
* whereis: New subcommand to show where a file's content has gotten to.
|
|
* Rethink filename encoding handling for display. Since filename encoding
|
|
may or may not match locale settings, any attempt to decode filenames
|
|
will fail for some files. So instead, do all output in binary mode.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sat, 12 Mar 2011 15:02:49 -0400
|
|
|
|
git-annex (0.22) unstable; urgency=low
|
|
|
|
* Git annexes can now be attached to bare git repositories.
|
|
(Both the local and remote host must have this version of git-annex
|
|
installed for it to work.)
|
|
* Support filenames that start with a dash; when such a file is passed
|
|
to a utility it will be escaped to avoid it being interpreted as an
|
|
option. (I went a little overboard and got the type checker involved
|
|
in this, so such files are rather comprehensively supported now.)
|
|
* New backends: SHA512 SHA384 SHA256 SHA224
|
|
(Supported on systems where corresponding shaNsum commands are available.)
|
|
* describe: New subcommand that can set or change the description of
|
|
a repository.
|
|
* Fix test suite to reap zombies.
|
|
(Zombies can be particularly annoying on OSX; thanks to Jimmy Tang
|
|
for his help eliminating the infestation... for now.)
|
|
* Make test suite not rely on a working cp -pr.
|
|
(The Unix wars are still ON!)
|
|
* Look for dir.git directories the same as git does.
|
|
* Support remote urls specified as relative paths.
|
|
* Support non-ssh remote paths that contain tilde expansions.
|
|
* fsck: Check for and repair location log damage.
|
|
* Bugfix: When fsck detected and moved away corrupt file content, it did
|
|
not update the location log.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 04 Mar 2011 15:10:57 -0400
|
|
|
|
git-annex (0.21) unstable; urgency=low
|
|
|
|
* test: Don't rely on chmod -R working.
|
|
* unannex: Fix recently introduced bug when attempting to unannex more
|
|
than one file at a time.
|
|
* test: Set git user name and email in case git can't guess values.
|
|
* Fix display of unicode filenames.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 11 Feb 2011 23:21:08 -0400
|
|
|
|
git-annex (0.20) unstable; urgency=low
|
|
|
|
* Preserve specified file ordering when instructed to act on multiple
|
|
files or directories. For example, "git annex get a b" will now always
|
|
get "a" before "b". Previously it could operate in either order.
|
|
* unannex: Commit staged changes at end, to avoid some confusing behavior
|
|
with the pre-commit hook, which would see some types of commits after
|
|
an unannex as checking in of an unlocked file.
|
|
* map: New subcommand that uses graphviz to display a nice map of
|
|
the git repository network.
|
|
* Deal with the mtl/monads-fd conflict.
|
|
* configure: Check for sha1sum.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 08 Feb 2011 18:57:24 -0400
|
|
|
|
git-annex (0.19) unstable; urgency=low
|
|
|
|
* configure: Support using the uuidgen command if the uuid command is
|
|
not available.
|
|
* Allow --exclude to be specified more than once.
|
|
* There are now three levels of repository trust.
|
|
* untrust: Now marks the current repository as untrusted.
|
|
* semitrust: Now restores the default trust level. (What untrust used to do.)
|
|
* fsck, drop: Take untrusted repositories into account.
|
|
* Bugfix: Files were copied from trusted remotes first even if their
|
|
annex.cost was higher than other remotes.
|
|
* Improved temp file handling. Transfers of content can now be resumed
|
|
from temp files later; the resume does not have to be the immediate
|
|
next git-annex run.
|
|
* unused: Include partially transferred content in the list.
|
|
* Bugfix: Running a second git-annex while a first has a transfer in
|
|
progress no longer deletes the first processes's temp file.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 28 Jan 2011 14:31:37 -0400
|
|
|
|
git-annex (0.18) unstable; urgency=low
|
|
|
|
* Bugfix: `copy --to` and `move --to` forgot to stage location log changes
|
|
after transferring the file to the remote repository.
|
|
(Did not affect ssh remotes.)
|
|
* fsck: Fix bug in moving of corrupted files to .git/annex/bad/
|
|
* migrate: Fix support for --backend option.
|
|
* unlock: Fix behavior when file content is not present.
|
|
* Test suite improvements. Current top-level test coverage: 80%
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 14 Jan 2011 14:17:44 -0400
|
|
|
|
git-annex (0.17) unstable; urgency=low
|
|
|
|
* unannex: Now skips files whose content is not present, rather than
|
|
it being an error.
|
|
* New migrate subcommand can be used to switch files to using a different
|
|
backend, safely and with no duplication of content.
|
|
* bugfix: Fix crash caused by empty key name. (Thanks Henrik for reporting.)
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sun, 09 Jan 2011 10:04:11 -0400
|
|
|
|
git-annex (0.16) unstable; urgency=low
|
|
|
|
* git-annex-shell: Avoid exposing any git repo config except for the
|
|
annex.uuid when doing configlist.
|
|
* bugfix: Running `move --to` with a remote whose UUID was not yet known
|
|
could result in git-annex not recording on the local side where the
|
|
file was moved to. This could not result in data loss, or even a
|
|
significant problem, since the remote *did* record that it had the file.
|
|
* Also, add a general guard to detect attempts to record information
|
|
about repositories with missing UUIDs.
|
|
* bugfix: Running `move --to` with a non-ssh remote failed.
|
|
* bugfix: Running `copy --to` with a non-ssh remote actually did a move.
|
|
* Many test suite improvements. Current top-level test coverage: 65%
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 07 Jan 2011 14:33:13 -0400
|
|
|
|
git-annex (0.15) unstable; urgency=low
|
|
|
|
* Support scp-style urls for remotes (host:path).
|
|
* Support ssh urls containing "~".
|
|
* Add trust and untrust subcommands, to allow configuring repositories
|
|
that are trusted to retain files without explicit checking.
|
|
* Fix bug in numcopies handling when multiple remotes pointed to the
|
|
same repository.
|
|
* Introduce the git-annex-shell command. It's now possible to make
|
|
a user have it as a restricted login shell, similar to git-shell.
|
|
* Note that git-annex will always use git-annex-shell when accessing
|
|
a ssh remote, so all of your remotes need to be upgraded to this
|
|
version of git-annex at the same time.
|
|
* Now rsync is exclusively used for copying files to and from remotes.
|
|
scp is not longer supported.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 31 Dec 2010 22:00:52 -0400
|
|
|
|
git-annex (0.14) unstable; urgency=low
|
|
|
|
* Bugfix to git annex unused in a repository with nothing yet annexed.
|
|
* Support upgrading from a v0 annex with nothing in it.
|
|
* Avoid multiple calls to git ls-files when passed eg, "*".
|
|
|
|
-- Joey Hess <joeyh@debian.org> Fri, 24 Dec 2010 17:38:48 -0400
|
|
|
|
git-annex (0.13) unstable; urgency=low
|
|
|
|
* Makefile: Install man page and html (when built).
|
|
* Makefile: Add GHCFLAGS variable.
|
|
* Fix upgrade from 0.03.
|
|
* Support remotes using git+ssh and ssh+git as protocol.
|
|
Closes: #607056
|
|
|
|
-- Joey Hess <joeyh@debian.org> Tue, 14 Dec 2010 13:05:10 -0400
|
|
|
|
git-annex (0.12) unstable; urgency=low
|
|
|
|
* Add --exclude option to exclude files from processing.
|
|
* mwdn2man: Fix a bug in newline supression. Closes: #606578
|
|
* Bugfix to git annex add of an unlocked file in a subdir. Closes: #606579
|
|
* Makefile: Add PREFIX variable.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sat, 11 Dec 2010 17:32:00 -0400
|
|
|
|
git-annex (0.11) unstable; urgency=low
|
|
|
|
* If available, rsync will be used for file transfers from remote
|
|
repositories. This allows resuming interrupted transfers.
|
|
* Added remote.annex-rsync-options.
|
|
* Avoid deleting temp files when rsync fails.
|
|
* Improve detection of version 0 repos.
|
|
* Add uninit subcommand. Closes: #605749
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sat, 04 Dec 2010 17:27:42 -0400
|
|
|
|
git-annex (0.10) unstable; urgency=low
|
|
|
|
* In .gitattributes, the annex.numcopies attribute can be used
|
|
to control the number of copies to retain of different types of files.
|
|
* Bugfix: Always correctly handle gitattributes when in a subdirectory of
|
|
the repository. (Had worked ok for ones like "*.mp3", but failed for
|
|
ones like "dir/*".)
|
|
* fsck: Fix warning about not enough copies of a file, when locations
|
|
are known, but are not available in currently configured remotes.
|
|
* precommit: Optimise to avoid calling git-check-attr more than once.
|
|
* The git-annex-backend attribute has been renamed to annex.backend.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sun, 28 Nov 2010 19:28:05 -0400
|
|
|
|
git-annex (0.09) unstable; urgency=low
|
|
|
|
* Add copy subcommand.
|
|
* Fix bug in setkey subcommand triggered by move --to.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sat, 27 Nov 2010 17:14:59 -0400
|
|
|
|
git-annex (0.08) unstable; urgency=low
|
|
|
|
* Fix `git annex add ../foo` (when ran in a subdir of the repo).
|
|
* Add configure step to build process.
|
|
* Only use cp -a if it is supported, falling back to cp -p or plain cp
|
|
as needed for portability.
|
|
* cp --reflink=auto is used if supported, and will make git annex unlock
|
|
much faster on filesystems like btrfs that support copy on write.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sun, 21 Nov 2010 13:45:44 -0400
|
|
|
|
git-annex (0.07) unstable; urgency=low
|
|
|
|
* find: New subcommand.
|
|
* unused: New subcommand, finds unused data. (Split out from fsck.)
|
|
* dropunused: New subcommand, provides for easy dropping of unused keys
|
|
by number, as listed by the unused subcommand.
|
|
* fsck: Print warnings to stderr; --quiet can now be used to only see
|
|
problems.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Mon, 15 Nov 2010 18:41:50 -0400
|
|
|
|
git-annex (0.06) unstable; urgency=low
|
|
|
|
* fsck: Check if annex.numcopies is satisfied.
|
|
* fsck: Verify the sha1 of files when the SHA1 backend is used.
|
|
* fsck: Verify the size of files when the WORM backend is used.
|
|
* fsck: Allow specifying individual files if fscking everything
|
|
is not desired.
|
|
* fsck: Fix bug, introduced in 0.04, in detection of unused data.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sat, 13 Nov 2010 16:24:29 -0400
|
|
|
|
git-annex (0.05) unstable; urgency=low
|
|
|
|
* Optimize both pre-commit and lock subcommands to not call git diff
|
|
on every file being committed/locked.
|
|
(This actually also works around a bug in ghc, that caused
|
|
git-annex 0.04 pre-commit to sometimes corrupt filename being read
|
|
from git ls-files and fail.
|
|
See <http://hackage.haskell.org/trac/ghc/ticket/4493>
|
|
The excessive number of calls made by pre-commit exposed the ghc bug.
|
|
Thanks Josh Triplett for the debugging.)
|
|
* Build with -O2.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Thu, 11 Nov 2010 18:31:09 -0400
|
|
|
|
git-annex (0.04) unstable; urgency=low
|
|
|
|
* Add unlock subcommand, which replaces the symlink with a copy of
|
|
the file's content in preparation of changing it. The "edit" subcommand
|
|
is an alias for unlock.
|
|
* Add lock subcommand.
|
|
* Unlocked files will now automatically be added back into the annex when
|
|
committed (and the updated symlink committed), by some magic in the
|
|
pre-commit hook.
|
|
* The SHA1 backend is now fully usable.
|
|
* Add annex.version, which will be used to automate upgrades
|
|
between incompatible versions.
|
|
* Reorganised the layout of .git/annex/
|
|
* The new layout will be automatically upgraded to the first time
|
|
git-annex is used in a repository with the old layout.
|
|
* Note that git-annex 0.04 cannot transfer content from old repositories
|
|
that have not yet been upgraded.
|
|
* Annexed file contents are now made unwritable and put in unwriteable
|
|
directories, to avoid them accidentially being removed or modified.
|
|
(Thanks Josh Triplett for the idea.)
|
|
* Add build dep on libghc6-testpack-dev. Closes: #603016
|
|
* Avoid using runghc to run test suite as it is not available on all
|
|
architectures. Closes: #603006
|
|
|
|
-- Joey Hess <joeyh@debian.org> Wed, 10 Nov 2010 14:23:23 -0400
|
|
|
|
git-annex (0.03) unstable; urgency=low
|
|
|
|
* Fix support for file:// remotes.
|
|
* Add --verbose
|
|
* Fix SIGINT handling.
|
|
* Fix handling of files with unusual characters in their name.
|
|
* Fixed memory leak; git-annex no longer reads the whole file list
|
|
from git before starting, and will be much faster with large repos.
|
|
* Fix crash on unknown symlinks.
|
|
* Added remote.annex-scp-options and remote.annex-ssh-options.
|
|
* The backends to use when adding different sets of files can be configured
|
|
via gitattributes.
|
|
* In .gitattributes, the git-annex-backend attribute can be set to the
|
|
names of backends to use when adding different types of files.
|
|
* Add fsck subcommand. (For now it only finds unused key contents in the
|
|
annex.)
|
|
|
|
-- Joey Hess <joeyh@debian.org> Sun, 07 Nov 2010 18:26:04 -0400
|
|
|
|
git-annex (0.02) unstable; urgency=low
|
|
|
|
* Can scp annexed files from remote hosts, and check remote hosts for
|
|
file content when dropping files.
|
|
* New move subcommand, that makes it easy to move file contents from
|
|
or to a remote.
|
|
* New fromkey subcommand, for registering urls, etc.
|
|
* git-annex init will now set up a pre-commit hook that fixes up symlinks
|
|
before they are committed, to ensure that moving symlinks around does not
|
|
break them.
|
|
* More intelligent and fast staging of modified files; git add coalescing.
|
|
* Add remote.annex-ignore git config setting to allow completly disabling
|
|
a given remote.
|
|
* --from/--to can be used to control the remote repository that git-annex
|
|
uses.
|
|
* --quiet can be used to avoid verbose output
|
|
* New plumbing-level dropkey and addkey subcommands.
|
|
* Lots of bug fixes.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Wed, 27 Oct 2010 16:39:29 -0400
|
|
|
|
git-annex (0.01) unstable; urgency=low
|
|
|
|
* First prerelease.
|
|
|
|
-- Joey Hess <joeyh@debian.org> Wed, 20 Oct 2010 12:54:24 -0400
|