Say we have 2 backup drives and want to fill them both evenly with files,
different files in each drive. Currently, preferred content cannot express
that entirely:

* One way is to use a-m* and n-z*, but that's unlikely to split filenames evenly. 
* Or, can let both repos take whatever files, perhaps at random, that the
  other repo is not know to contain, but then repos will race and both get
  the same file, or similarly if they are not communicating frequently.

So, let's add a new expression: `balanced(group)`

This would work by taking the list of uuids of all repositories in the
group, and sorting them, which yields a list from 0..M-1 repositories.

To decide which repository wants key K, convert K to a number N in some
stable way and then `N mod M` yields the number of the repository that
wants it, while all the rest don't.

(Since git-annex keys can be pretty long and not all of them are random
hashes, let's md5sum the key and then use the md5 as a number.)

This expression is stable as long as the members of the group don't change.
I think that's stable enough to work as a preferred content expression.

Now, you may want to be able to add a third repo and have the data be
rebalanced, with some moving to it. And that would happen. However, as this
scheme stands, it's equally likely that adding repo3 will make repo1 and
repo2 want to swap files between them. So, we'll want to add some
precautions to avoid a lot of data moving around in this case:

	((balanced(backup) and not (copies=backup:1)) or present

So once file lands on a backup drive, it stays there, even if more backup
drives change the balancing.

-----

Some limitations:

* The item size is not taken into account. One repo could end up with a
  much larger item or items and so fill up faster. And the other repo
  wouldn't then notice it was full and take up some slack.
* With the complicated expression above, adding a new repo when one 
  is full would not necessarily result in new files going to one of the 2
  repos that still have space. Some items would end up going to the full
  repo.

These can be dealt with by noticing when a repo is full and moving some
of it's files (any will do) to other repos in its group. I don't see a way
to make preferred content express that movement though; it would need to be
a manual/scripted process.

> Could the size of each repo be recorded (either actual disk size or
> desired max size) and when a repo is too full to hold an object, be left
> out of the set of repos used to calculate where to store that object?
>
> With the preferred content expression above with "present" in it, 
> a repo being full would not cause any content to be moved off of it,
> only new content that had not yet reached any of the repos in the 
> group would be affected. That seems good.
> 
> This would need only a single one-time write to the git-annex branch,
> to record the repo size. Then update a local counter for each repository
> from the git-annex branch location log changes. 
> There is a todo about doing this,
> [[todo/track_free_space_in_repos_via_git-annex_branch]].
> 
> Of course, in the time after the git-annex branch was updated and before
> it reaches the local repo, a repo can be full without us knowing about
> it. Stores to it would fail, and perhaps be retried, until the updated
> git-annex branch was synced.

-----

What if we have 5 backup repos and want each file to land in 3 of them?
There's a simple change that can support that:
`balanced(group:3)`

This works the same as before, but rather than just `N mod M`, take
`N+I mod M` where I is [0..2] to get the list of 3 repositories that want a
key.

This does not really avoid the limitations above, but having more repos
that want each file will reduce the chances that no repo will be able to
take a given file. In the [[iabackup]] scenario, new clients will just be
assigned until all the files reach the desired level or replication.

However.. Imagine there are 9 repos, all full, and some files have not
reached desired level of replication. Seems like adding 1 more repo will make
only 3 in 10 files be wanted by that new repo. Even if the repo has space
for all the files, it won't be sufficient, and more repos would need to be
added.

One way to avoid this problem would be if the preferred content was only
used for the initial distribution of files to a repo. If the repo has
gotten all the files it wants, it could make a second pass and
opportunistically get files it doesn't want but that it has space for
and that don't have enough copies yet.
Although this gets back to the original problem of multiple repos racing
downloads and files getting more than the desired number of copies.

> With the above idea of tracking when repos are full, the new repo
> would want all files when the other 9 repos are full.

----

Of course this is not limited to backup drives. A more complicated example:
There are 4 geographically distributed datacenters, each of which has some
number of drives. Each file should have 1 copy stored in each datacenter,
on some drive there. 

This can be implemented by making a group for each datacenter, which all of
its drives are in, and using `balanced()` to pick the drive that holds the
copy of the file. The preferred content expression would be eg:
	
    ((balanced(datacenterA) and not (copies=datacenterA:1)) or present

In such a situation, to avoid a `N^2` remote interconnect, there might be a
transfer repository in each datacenter, that is in front of its drives. The
transfer repository should want files that have not yet reached the
destination drive. How to write a preferred content expression for that?
It might be sufficient to use `copies=datacenterA:1`, so long as the file
reaching any drive in the datacenter is enough. But may want to add
something analagous to `inallgroup=` that checks if a file is in
the place that `balanced()` picks for a group. Eg, 
`balancedgroup=datacenterA` for 1 copy and `balancedgroup=group:datacenterA:2`
for N copies.

----

Another possibility to think about is to have one repo calculate which
files to store on which repos, to best distribute and pack them. The first
repo that writes a solution would win and other nodes would work to move
files around as needed. 

In a split brain situation, there would be sets of repos doing work toward 
different solutions. On merge it would make sense to calculate a new
solution that takes that work into account as well as possible. (Some work
would surely have been in vain.)

## see also

[[todo/proving_preferred_content_behavior]]