Consider two use cases: 1. Using a v6 repo with locked files on a crippled filesystem not supporting symlinks. For the files to be usable, they need to be unlocked. But, the user may not want to unlock the files everywhere, just on this one crippled system. 2. [[todo/hide_missing_files]] Both of these could be met by making `git-annex sync` maintain an adjusted version of the original branch, eg `adjusted/master`. There would be a filter function. For #1 above it would simply convert all annex symlinks to annex file pointers. For #2 above it would omit files whose content is not currently in the annex. Sometimes, both #1 and #2 would be wanted. [Alternatively, it could stay on the master branch, and only adjust the work tree and index. See WORKTREE notes below for how this choice would play out.] [[!toc]] ## filtering master adjusted/master A |--------------->A' | | When generating commit A', reuse the date of A and use a standard author, committer, and message. This means that two users with the adjusted branch checked out and using the same filters will get identical shas for A', and so can collaborate on them. ## commit When committing changes, a commit is made as usual to the adjusted branch. So, the user can `git commit` as usual. This does not touch the original branch yet. Then we need to get from that commit to one with the filters reversed, which should be the same as if the adjusted branch had not been used. This commit gets added onto the original branch. So, the branches would look like this: master adjusted/master A |--------------->A' | | | C (new commit) B < - - - - - - - | |--------------->B' | | Note particularly that B does not have A' or C in its history; the adjusted branch is not evident from outside. Also note that B gets filtered and the adjusted branch is rebased on top of it, so C does not remain in the adjusted branch history either. This will make other checkouts that are in the same adjusted branch end up with the same B' commit when they pull B. There may be multiple commits made to the adjusted branch before any get applied back to the original branch. This is handled by reverse filtering commits one at a time and rebasing the others on top. master adjusted/master A |--------------->A' | | | C1 | | | C2 master adjusted/master A |--------------->A' | | | C1 B1< - - - - - - - | |--------------->B1' | | | C2' B2< - - - - - - - | |--------------->B2' [WORKTREE: A pre-commit hook would be needed to update the staged changes, reversing the filter before the commit is made. All the other complications above are avoided.] ## merge This would be done by `git annex merge` and `git annex sync`, with the goal of merging origin/master into master, and updating adjusted/master. Note that the adjusted files db needs to be updated to reflect the changes that are merged in, for object add/remove to work as described below. When merging, there should never be any commits present on the adjusted/master branch that have not yet been filtered over to the master branch. If there are any such commits, just filter them into master before beginning the merge. There may be staged changes, or changes in the work tree. First filter the new commit: origin/master adjusted/master A |--------------->A' | | | | B | |---------->B' Then, merge that into adjusted/master: origin/master adjusted/master A |--------------->A' | | | | B | | | |----------->B'->B'' That merge will take care of updating the work tree. (What if there is a merge conflict between A' and B'? Normally such a merge conflict should only affect the work tree/index, so can be resolved without making a commit, but B'' may end up being made to resolve a merge conflict.) ------ TODO FIXME: When an adjusted unlocked branch has gotten a file, and a new commit is merged in, that does not touch that file, there is a false merge conflict on the file. It's auto-resolved by creating a .variant file. This is probably a bug in the auto-resolve code for v6 files. Test case: git clone ~/lib/tmp cd tmp git annex upgrade git annex adjust git annex get t/foo # make change in ~/lib/tmp and commit git annex sync # t/foo.variant-* is there ------ Once the merge is done, we have a commit B'' on adjusted/master. To finish, adjust that commit so it does not have adjusted/master as its parent. origin/master adjusted/master A |--------------->A' | | | | B | |--------------->B'' | | Finally, update master, by reverse filtering B''. TODO Notice how similar this is to the commit graph. So, "fast-forward" merging the same B commit from origin/master will lead to an identical sha for B' as the original committer got. Since the adjusted/master branch is not present on the remote, if the user does a `git pull`, it won't merge in changes from origin/master. Which is good because the filter needs to be applied first. However, if the user does `git merge origin/master`, they'll get into a state where the filter has not been applied. The post-merge hook could be used to clean up after that. Or, let the user foot-shoot this way; they can always reset back once they notice the mistake. [WORKTREE: `git pull` would update the work tree, and may lead to conflicts between the adjusted work tree and pulled changes. A post-merge hook would be needed to re-adjust the work tree, and there would be a window where eg, not present files would appear in the work tree.] ## annex object add/remove When objects are added/removed from the annex, the associated file has to be looked up, and the filter applied to it. So, dropping a file with the missing file filter would cause it to be removed from the adjusted branch, and receiving a file's content would cause it to appear in the adjusted branch. TODO These changes would need to be committed to the adjusted branch, otherwise `git diff` would show them. [WORKTREE: Simply adjust the work tree (and index) per the filter.] ## reverse filtering commits A user's commits on the adjusted branch have to be reverse filtered to get changes to apply to the master branch. This reversal of one filter can be done as just another filter. Since only files touched by the commit will be reverse filtered, it doesn't need to reverse all changes made by the original filter. For example, reversing the unlock filter might lock the file. Or, it might do nothing, which would make all committed files remain unlocked. ## push The new master branch can then be pushed out to remotes. The adjusted/master branch is not pushed to remotes. `git-annex sync` should automatically push master when adjusted/master is checked out. When push.default is "simple" (the new default), running `git push` when in adjusted/master won't push anything. It would with "matching". Pity. (I continue to feel git picked the wrong default here.) Users may find that surprising. Users of `git-annex sync` won't need to worry about it though. [WORKTREE: push works as usual] ## acting on filtered-out files If a file is filtered out due to not existing, there should be a way for `git annex get` to get it. Since the filtered out file is not in the index, that would not normally work. What to do? Maybe instead of making a branch where the file is deleted, it would be better to delete it from the work tree, but keep the branch as-is. Then `git annex get` would see the file, as it's in the index. But, not maintaining an adjusted branch complicates other things. See WORKTREE notes throughout this page. Overall, the WORKTREE approach seems too problimatic. Ah, but we know that when filter #2 is in place, any file that `git annex get` could act on is not in the index. So, it could look at the master branch instead. (Same for `git annex move --from` and `git annex copy --from`) OTOH, if filter #1 is in place and not #2, a file might be renamed in the index, and `git annex get $newname` should work. So, it should look at the index in that case. ## problems Using `git checkout` when in an adjusted branch is problimatic, because a non-adjusted branch would then be checked out. But, we can just say, if you want to get into an adjusted branch, you have to run git annex adjust Or, could make a post-checkout hook. This is would mostly be confusing when git-annex init switched into the adjusted branch due to lack of symlink support. After a commit to an adjusted branch, `git push` won't do anything. The user has to know to git-annex sync. (Even if a pre-commit hook propigated the commit back to the master branch, `git push` wouldn't push it with the default "matching" push strategy.) Tags are bit of a problem. If the user tags an ajusted branch, the tag includes the local adjustments. [WORKTREE: not a problem] If the user refers to commit shas (in, eg commit messages), those won't be visible to anyone else. [WORKTREE: not a problem] When a pull modifies a file, its content won't be available, and so it would be hidden temporarily by filter #2. So the file would seem to vanish, and come back later, which could be confusing. Could be fixed as discussed in [[todo/deferred_update_mode]]. Arguably, it's just as confusing for the file to remain visible but have its content temporarily replaced with a annex pointer. ## integration with view branches Entering a view from an adjusted branch should probably carry the filtering over into the creation/updating of the view branch. Could go a step further, and implement view branches as another branch adjusting filter, albeit an extreme one. This might improve view branches. For example, it's not currently possible to update a view branch with changes fetched from a remote, and this could get us there. This would need the reverse filter to be able to change metadata, so that a commit that moved files in the view updates their metadata. [WORKTREE: Wouldn't be able to integrate, unless view branches are changed into adjusted view worktrees.] ## TODOs * Interface in webapp to enable adjustments. * Upgrade from direct mode to v6 in unlocked branch.