Eliminated complexity and future proofed. The most important change is that
all functions over Difference are now total; any Difference that can be
expressed should be handled. Avoids needs for sanity checking of inputs,
and version skew with the future.
Also, the difference.log now serializes a [Difference], not a Differences.
This saves space and keeps it simpler.
Note that [Difference] might contain conflicting differences (eg,
[Version5, Version6]. In this case, one of them needs to consistently win
over the others, probably based on Ord.
* init: Repository tuning parameters can now be passed when initializing a
repository for the first time. For details, see
http://git-annex.branchable.com/tuning/
* merge: Refuse to merge changes from a git-annex branch of a repo
that has been tuned in incompatable ways.
* info: Can now display info about a given uuid.
* Added to remote/uuid info: Count of the number of keys present
on the remote, and their size. This is rather expensive to calculate,
so comes last and --fast will disable it.
* Git remote info now includes the date of the last sync with the remote.
addurl behavior change: When downloading an url ending in .torrent,
it will download files from bittorrent, instead of the old behavior
of adding the torrent file to the repository.
Added Recommends on aria2 and bittornado | bittorrent.
This commit was sponsored by Asbjørn Sloth Tønnesen.
This allows bypassing the direct mode guard in a safe way to do all sorts
of things including git revert, git mv, git checkout ...
This commit was sponsored by the WikiMedia Foundation.
Now `git annex info $remote` shows info specific to the type of the remote,
for example, it shows the rsync url.
Remote types that support encryption or chunking also include that in their
info.
This commit was sponsored by Ævar Arnfjörð Bjarmason.
* New annex.hardlink setting. Closes: #758593
* init: Automatically detect when a repository was cloned with --shared,
and set annex.hardlink=true, as well as marking the repository as
untrusted.
Had to reorganize Logs.Trust a bit to avoid a cycle between it and
Annex.Init.
This only performs some basic tests so far; no testing of chunking or
resuming. Also, the existing encryption type of the remote is used; it
would be good later to derive an encrypted and a non-encrypted version of
the remote and test them both.
This commit was sponsored by Joseph Liu.
Catch an exception when ensureInitialized is run in a non-initted
repository. In this case, just read the git config, so that the Git.Repo
object is not LocalUnknown, which is what is used to represent remotes
on eg, drives that are not connected.
The assistant already got this right, and like with the assistant, this
causes an implicit git-annex init of the local remote on the second sync,
once the git-annex branch has been pushed to it.
See this comment for more analysis:
http://git-annex.branchable.com/todo/Recovering_from_a_bad_sync/#comment-64e469a2c1969829ee149cbb41b1c138
This commit was sponsored by jscit.
When annex.genmetadata is set, metadata from the feed is added to files
that are imported from it.
Reused the same feedtitle and itemtitle, feedauthor, itemauthor, etc names
that are used in --template.
Also added title and author, which are the item title/author if available,
falling back to the feed title/author. These are more likely to be common
metadata fields.
(There is a small bit of dupication here, but once git gets
around to packing the object, it will compress it away.)
The itempubdate field is not included in the metadata as a string; instead
it is used to generate year and month fields, same as is done when adding
files with annex.genmetadata set.
This commit was sponsored by Amitai Schlair, who cooincidentially
is responsible for ikiwiki generating nice feed metadata!
It is useful to be able to specify an alternative git-annex-shell
program to execute on the remote, e.g., to run a version not on the
PATH. Use remote.<name>.annex-shell if specified, instead of the
default "git-annex-shell" i.e., first so-named executable on the
PATH.
To do so, I slightly changed the behavior of unannex. Now in fast mode, it
only makes a hard link when the annexed file's link count is 1. This avoids
unannexing 2 files with the same content in fast mode from hard linking
them together. (One will end up hard linked to the annex, which the docs
warn about.)
With that change, uninit can simply always run unannex in fast mode. Since
.git/annex/objects is being blown away anyway, there's no worry in this
case about a hard link pointing into it causing an annexed object to be
modified.
So far, handling connecting to git-annex-shell notifychanges, and
pulling immediately when a change is pushed to a remote.
A little bit buggy (crashes after the first pull), but it already works!
This commit was sponsored by Mark Sheppard.
Motivation: Hook scripts for nautilus or other file managers
need to provide the user with feedback that a file is being downloaded.
This commit was sponsored by THM Schoemaker.
Using the extract(1) program to do the heavy lifting.
Decided to make git-annex run pre-commit-annex when committing. Since
git-annex pre-commit also runs it, it'll be run when git commit is run too,
via the pre-commit hook. This basically gives back the pre-commit hook
that git-annex took away. The implementation avoids repeatedly looking
for the hook script when the assistant is running and committing
repeatedly; only checks if the hook is available once.
To make the script simpler, made git-annex metadata -s field?=value
only set a field when it's not already got a value.
This commit was sponsored by bak.
Note that negated globs are not supported. Would have complicated the code
to add them, without changing the data type serialization in a
non-backwards-compatable way.
This commit was sponsored by Denver Gingerich.
When constructing views, metadata is available about the location of the
file in the view's reference branch. Allows incorporating parts of the
directory hierarchy in a view.
For example `git annex view tag=* podcasts/=*` makes a view in the form
tag/showname.
Performance impact: I benchmarked git annex view tag=* in the conference
proceedings repo to take 6.459s before this change, and 6.544s after.
FWIW, I considered making the syntax for this be podcasts/*, which might
be easier for the user to learn. However, I think it's not as good:
* The user has to then juggle two different syntaxes, and podcasts/* will
be expanded by the shell so they also need to quote it, while podcasts/=*
is unlikely to be expanded by the shell.
* It would allow for things like podcasts/*/* and *.mp3 which do not
map well into views.
This commit was sponsored by Aurélien Pinceaux.
This reverts commit 9e8370d1b9.
No, --incremental and --more are not needed when using
--incremental-schedule. The --incremental-schedule option
implies the other ones.
While writing this documentation, I realized that there needed to be a way
to stay in a view like tag=* while adding a filter like tag=work that
applies to the same field.
So, there are really two ways a view can be refined. It can have a new
"field=explicitvalue" filter added to it, which does not change the
"shape" of the view, but narrows the files it shows.
Or, it can have a new view added, which adds another level of
subdirectories.
So, added a vfilter command, which takes explicit values to add to the
filter, and rejects changes that would change the shape of the view.
And, made vadd only accept changes that change the shape of the view.
And, changed the View data type slightly; now components that can match
multiple metadata values can be visible, or not visible.
This commit was sponsored by Stelian Iancu.
So the user can now switch to a view and then move files around within it
to manage metadata. For example, moving a file into a new directory
when in the tags=* view adds a tag to it.
Implementation is fairly efficient. One diff-index, which is no more
expensive than the first stage of a git commit, followed by possibly
some cat-file --batch traffic to find the key (when deleting a file).
Very similar to what's done in direct mode when committing. And like
direct mode when updating the WC after a merge, it has to buffer the
diff-tree values in order to make 2 passes over them.
When not in a view, pre-commit now does one extra git symbolic-ref,
which is tiny overhead.
This commit was sponsored by Andrew Eskridge.
(And a vpop command, which is still a bit buggy.)
Still need to do vadd and vrm, though this also adds their documentation.
Currently not very happy with the view log data serialization. I had to
lose the TDFA regexps temporarily, so I can have Read/Show instances of
View. I expect the view log format will change in some incompatable way
later, probably adding last known refs for the parent branch to View
or something like that.
Anyway, it basically works, although it's a bit slow looking up the
metadata. The actual git branch construction is about as fast as it can be
using the current git plumbing.
This commit was sponsored by Peter Hogg.
Adds metadata log, and command.
Note that unsetting field values seems to currently be broken.
And in general this has had all of 2 minutes worth of testing.
This commit was sponsored by Julien Lefrique.
Make sanity checker run git annex unused daily, and queue up transfers
of unused files to any remotes that will have them. The transfer retrying
code works for us here, so eg when a backup disk remote is plugged in,
any transfers to it are done. Once the unused files reach a remote,
they'll be removed locally as unwanted.
If the setup does not cause unused files to go to a remote, they'll pile
up, and the sanity checker detects this using some heuristics that are
pretty good -- 1000 unused files, or 10% of disk used by unused files,
or more disk wasted by unused files than is left free. Once it detects
this, it pops up an alert in the webapp, with a button to take action.
TODO: Webapp UI to configure this, and also the ability to launch an
immediate cleanup of all unused files.
This commit was sponsored by Simon Michael.
Checking .gitattributes adds a full minute to a git annex find looking for
files that don't have enough copies. 2:25 increasts to 3:27. I feel this is
too much of a slowdown to justify making it the default. So, exposed two
versions of the preferred content expression, a slow one and a fast but
approximate one.
I'm using the approximate one in the default preferred content expressions
to avoid slowing down the assistant.
* Add numcopiesneeded preferred content expression.
* Client, transfer, incremental backup, and archive repositories
now want to get content that does not yet have enough copies.
This means the asssistant will make copies of files that don't yet
meet the configured numcopies, even to places that would not normally want
the file.
For example, if numcopies is 4, and there are 2 client repos and
2 transfer repos, and 2 removable backup drives, the file will be sent
to both transfer repos in order to make 4 copies. Once a removable drive
get a copy of the file, it will be dropped from one transfer repo or the
other (but not both).
Another example, numcopies is 3 and there is a client that has a backup
removable drive and two small archive repos. Normally once one of the small
archives has a file, it will not be put into the other one. But, to satisfy
numcopies, the assistant will duplicate it into the other small archive
too, if the backup repo is not available to receive the file.
I notice that these examples are fairly unlikely setups .. the old behavior
was not too bad, but it's nice to finally have it really correct.
.. Almost. I have skipped checking the annex.numcopies .gitattributes
out of fear it will be too slow.
This commit was sponsored by Florian Schlegel.
* numcopies: New command, sets global numcopies value that is seen by all
clones of a repository.
* The annex.numcopies git config setting is deprecated. Once the numcopies
command is used to set the global number of copies, any annex.numcopies
git configs will be ignored.
* assistant: Make the prefs page set the global numcopies.
This global numcopies setting is needed to let preferred content
expressions operate on numcopies.
It's also convenient, because typically if you want git-annex to preserve N
copies of files in a repo, you want it to do that no matter which repo it's
running in. Making it global avoids needing to warn the user about gotchas
involving inconsistent annex.numcopies settings.
(See changes to doc/numcopies.mdwn.)
Added a new variety of git-annex branch log file, that holds only 1 value.
Will probably be useful for other stuff later.
This commit was sponsored by Nicolas Pouillard.
Similar to the assistant, this honors any configured preferred content
expressions.
I am not entirely happpy with the implementation. It would be nicer if
the seek function returned a list of actions which included the individual
file gets and copies and drops, rather than the current list of calls to
syncContent. This would allow getting rid of the somewhat reundant display
of "sync file [ok|failed]" after the get/put display.
But, do that, withFilesInGit would need to somehow be able to construct
such a mixed action list. And it would be less efficient than the current
implementation, which is able to reuse several values between eg get and
drop.
Note that currently this does not try to satisfy numcopies when
getting/putting files (numcopies are of course checked when dropping
files!) This makes it like the assistant, and unlike get --auto
and copy --auto, which do duplicate files when numcopies is not yet
satisfied. I don't know if this is the right decision; it only seemed to
make sense to have this parallel the assistant as far as possible to start
with, since I know the assistant works.
This commit was sponsored by Øyvind Andersen Holm.
Known problems:
1. Tries to tahoe start when daemon is already running.
2. If multiple tahoe remotes are set up on the same computer,
they will have the same node.url configured by default,
and this confuses tahoe commands.
This commit was sponsored by LeastAuthority.com
Note that the hash backends were made to stop printing a (checksum..)
message as part of this, since it showed up without a file when deciding
whether to act on a file. Should have probably removed that message a while
ago anyway, I suppose.
This works for both direct and indirect mode.
It may need some performance tuning.
Note that unlike git status, it only shows the status of the work tree, not
the status of the index. So only one status letter, not two .. and since
files that have been added and not yet committed do not differ between the
work tree and the index, they are not shown. Might want to add display of
the index vs the last commit eventually.
This commit was sponsored by an unknown bitcoin contributor, whose
contribution as been going up lately! ;)
When starting up the assistant, it'll remind about the current
repository, if it doesn't have checks. And when a removable drive
is plugged in, it will remind if a repository on it lacks checks.
Since that might be annoying, the reminders can be turned off.
This commit was sponsored by Nedialko Andreev.
Copies files out of the annex. This avoids an unannex of one file breaking
other files that link to the same content. Also, it means that the content
remains in the annex using up space until cleaned up with "git annex
unused".
(The behavior of unannex --fast has not changed; it still hard
links to content in the annex. --fast was not made the default because it
is potentially unsafe; editing such a hard linked file can unexpectedly
change content stored in the annex.)
Overridable with --user-agent option.
Not yet done for S3 or WebDAV due to limitations of libraries used --
nether allows a user-agent header to be specified.
This commit sponsored by Michael Zehrer.
Note that it would be possible to extend the display to show all
repositories. But there can be a lot of repositories that are not set up as
remotes, and it would significantly clutter the display to show them all.
Since we're not showing all repositories, it's not worth trying to show
numcopies count either.
I decided to embrace these limitations and call the command remotes.
With the initremote parameters "encryption=pubkey keyid=788A3F4C".
/!\ Adding or removing a key has NO effect on files that have already
been copied to the remote. Hence using keyid+= and keyid-= with such
remotes should be used with care, and make little sense unless the point
is to replace a (sub-)key by another. /!\
Also, a test case has been added to ensure that the cipher and file
contents are encrypted as specified by the chosen encryption scheme.
Wrote nice pure transition calculator, and ugly code to stage its results
into the git-annex branch. Also had to split up several Log modules
that Annex.Branch needed to use, but that themselves used Annex.Branch.
The transition calculator is limited to looking at and changing one file at
a time. While this made the implementation relatively easy, it precludes
transitions that do stuff like deleting old url log files for keys that are
being removed because they are no longer present anywhere.
/!\ It is to be noted that revoking a key does NOT necessarily prevent
the owner of its private part from accessing data on the remote /!\
The only sound use of `keyid-=` is probably to replace a (sub-)key by
another, where the private part of both is owned by the same
person/entity:
git annex enableremote myremote keyid-=2512E3C7 keyid+=788A3F4C
Reference: http://git-annex.branchable.com/bugs/Using_a_revoked_GPG_key/
* Other change introduced by this patch:
New keys now need to be added with option `keyid+=`, and the scheme
specified (upon initremote only) with `encryption=`. The motivation for
this change is to open for new schemes, e.g., strict asymmetric
encryption.
git annex initremote myremote encryption=hybrid keyid=2512E3C7
git annex enableremote myremote keyid+=788A3F4C
Works, more or less. --dead is not implemented, and so far a new branch
is made, but keys no longer present anywhere are not scrubbed.
git annex sync fails to push the synced/git-annex branch after a forget,
because it's not a fast-forward of the existing synced branch. Could be
fixed by making git-annex sync use assistant-style sync branches.
When quvi is installed, git-annex addurl automatically uses it to detect
when an page is a video, and downloads the video file.
web special remote: Also support using quvi, for getting files,
or checking if files exist in the web.
This commit was sponsored by Mark Hepburn. Thanks!
This is a simple approach for setting up a mirroring repository.
It will work with any type of remotes.
Mirror --from is more expensive than mirror --to in general.
OTOH, mirror --from will get the file from any remote that has it, not only
the named mirror remote. And if the named mirror remote is not the fastest
available remote with a file, that can speed things up.
It would be possible to make the assistant or watch command do a more
dynamic mirroring, that didn't need to scan every time.
I spent a long time worrying about this problem with --all, that it cannot
check .gitattributes files for numcopies settings, and so would not be
entirely safe to use. The solution turns out to be simple, just don't
implement `git annex drop --all`. drop is the only command that needs to
check numcopies (move can also reduce the number of copies, but explicitly
bypasses numcopies settings).
Use cases that might need a drop --all are probably better served by using
unused and dropunused, which already work in a bare repository.
This is so git remotes on servers without git-annex installed can be used
to keep clients' git repos in sync.
This is a behavior change, but since annex-sync can be set to disable
syncing with a remote, I think it's acceptable.
Introduced a new per-remote option 'annex-rsync-transport' to specify
the remote shell that it to be used with rsync. In case the value is
'ssh', connections are cached unless 'sshcaching' is unset.
Let's make semitrusted+:1 mean that, since it cannot be expressed easily
with the current syntax (could use (semitrusted:1 or trusted:1), but that
does not scale to higher values than 2 copy, and also fails if I add more
trust levels).
Thanks to Andy for spotting this bug by just reading my blog.
I would have sort of liked to put this in .gitattributes, but it seems
it does not support multi-word attribute values. Also, making this a single
config setting makes it easy to only parse the expression once.
A natural next step would be to make the assistant `git add` files that
are not annex.largefiles. OTOH, I don't think `git annex add` should
`git add` such files, because git-annex command line tools are
not in the business of wrapping git command line tools.
I have seen some other programs do this, and think it's pretty cool. Means
you can test wherever it's deployed, as well as at build time.
My other reason for doing it is less happy. Cabal's handling of test suites
sucks, requiring duplicated info, and even when that's done, it fails to
preprocess hsc files here. Building it in avoids that and avoids having
to explicitly tell cabal to enable test suites, which would then make it
link the test executable every time, which is unnecessarily slow.
This also has the benefit that now "make fast test" does a max speed build
and tests it.
git annex init probes for crippled filesystems, and sets direct mode, as
well as `annex.crippledfilesystem`.
Avoid manipulating permissions of files on crippled filesystems.
That would likely cause an exception to be thrown.
Very basic support in Command.Add for cripped filesystems; avoids the lock
down entirely since doing it needs both permissions and hard links.
Will make this better soon.
New setting, can be used to disable autocommit of changed files by the
assistant, while it still does data syncing and other tasks.
Also wired into webapp UI
