And avoid migrate --update/--aply migrating when the new key was already
present in the repository, and got dropped. Luckily, the location log
allows distinguishing from the new key never having been present!
That is mostly useful for --apply because otherwise dropped files would
keep coming back until the old objects were reaped as unused. But it
seemed to make sense to also do it for --update. for consistency in edge
cases if nothing else. One case where --update can use it is when one
branch got migrated earlier, and we dropped the file, and now another
branch has migrated the same file.
Sponsored-by: Jack Hill on Patreon
Currently this is not an improvement, but it allows for optimising
appendJournalFile later. With an optimised appendJournalFile, this will
greatly speed up access patterns like git-annex addurl of a lot of urls
to the same key, where the log file can grow rather large. Appending
rather than re-writing the journal file for each line can save a lot of
disk writes.
It still has to read the current journal or branch file, to check
if it can append to it, and so when the journal file does not exist yet,
it can write the old content from the branch to it. Probably the re-reads
are better cached by the filesystem than repeated writes. (If the
re-reads turn out to keep performance bad, they could be eliminated, at
the cost of not being able to compact the log when replacing old
information in it. That could be enabled by a switch.)
While the immediate need is to affect addurl writes, it was implemented
at the level of presence logs, so will also perhaps speed up location logs.
The only added overhead is the call to isNewInfo, which only needs to
compare ByteStrings. Helping to balance that out, it avoids compactLog
when it's able to append.
Sponsored-by: Dartmouth College's DANDI project
* Deal with clock skew, both forwards and backwards, when logging
information to the git-annex branch.
* GIT_ANNEX_VECTOR_CLOCK can now be set to a fixed value (eg 1)
rather than needing to be advanced each time a new change is made.
* Misuse of GIT_ANNEX_VECTOR_CLOCK will no longer confuse git-annex.
When changing a file in the git-annex branch, the vector clock to use is now
determined by first looking at the current time (or GIT_ANNEX_VECTOR_CLOCK
when set), and comparing it to the newest vector clock already in use in
that file. If a newer time stamp was already in use, advance it forward by
a second instead.
When the clock is set to a time in the past, this avoids logging with
an old timestamp, which would risk that log line later being ignored in favor
of "newer" line that is really not newer.
When a log entry has been made with a clock that was set far ahead in the
future, this avoids newer information being logged with an older timestamp
and so being ignored in favor of that future-timestamped information.
Once all clocks get fixed, this will result in the vector clocks being
incremented, until finally enough time has passed that time gets back ahead
of the vector clock value, and then it will return to usual operation.
(This latter situation is not ideal, but it seems the best that can be done.
The issue with it is, since all writers will be incrementing the last
vector clock they saw, there's no way to tell when one writer made a write
significantly later in time than another, so the earlier write might
arbitrarily be picked when merging. This problem is why git-annex uses
timestamps in the first place, rather than pure vector clocks.)
Advancing forward by 1 second is somewhat arbitrary. setDead
advances a timestamp by just 1 picosecond, and the vector clock could
too. But then it would interfere with setDead, which wants to be
overrulled by any change. So it could use 2 picoseconds or something,
but that seems weird. It could just as well advance it forward by a
minute or whatever, but then it would be harder for real time to catch
up with the vector clock when forward clock slew had happened.
A complication is that many log files contain several different peices of
information, and it may be best to only use vector clocks for the same peice
of information. For example, a key's location log file contains
InfoPresent/InfoMissing for each UUID, and it only looks at the vector
clocks for the UUID that is being changed, and not other UUIDs.
Although exactly where the dividing line is can be hard to determine.
Consider metadata logs, where a field "tag" can have multiple values set
at different times. Should it advance forward past the last tag?
Probably. What about when a different field is set, should it look at
the clocks of other fields? Perhaps not, but currently it does, and
this does not seems like it will cause any problems.
Another one I'm not entirely sure about is the export log, which is
keyed by (fromuuid, touuid). So if multiple repos are exporting to the
same remote, different vector clocks can be used for that remote.
It looks like that's probably ok, because it does not try to determine
what order things occurred when there was an export conflict.
Sponsored-by: Jochen Bartl on Patreon
This adds a separate journal, which does not currently get committed to
an index, but is planned to be committed to .git/annex/index-private.
Changes that are regarding a UUID that is private will get written to
this journal, and so will not be published into the git-annex branch.
All log writing should have been made to indicate the UUID it's
regarding, though I've not verified this yet.
Currently, no UUIDs are treated as private yet, a way to configure that
is needed.
The implementation is careful to not add any additional IO work when
privateUUIDsKnown is False. It will skip looking at the private journal
at all. So this should be free, or nearly so, unless the feature is
used. When it is used, all branch reads will be about twice as expensive.
It is very lucky -- or very prudent design -- that Annex.Branch.change
and maybeChange are the only ways to change a file on the branch,
and Annex.Branch.set is only internal use. That let Annex.Branch.get
always yield any private information that has been recorded, without
the risk that Annex.Branch.set might be called, with a non-private UUID,
and end up leaking the private information into the git-annex branch.
And, this relies on the way git-annex union merges the git-annex branch.
When reading a file, there can be a public and a private version, and
they are just concacenated together. That will be handled the same as if
there were two diverged git-annex branches that got union merged.
Especially from borg, where the content identifier logs
all end up being the same identical file!
But also, for other imports, the location tracking logs can,
in some cases, be identical files.
Bonus optimisation: Avoid looking up (and parsing when set)
GIT_ANNEX_VECTOR_CLOCK env var every time a log is written to.
Although the lookup does happen at startup even when no
log will be written now.
Finally builds (oh the agoncy of making it build), but still very
unmergable, only Command.Find is included and lots of stuff is badly
hacked to make it compile.
Benchmarking vs master, this git-annex find is significantly faster!
Specifically:
num files old new speedup
48500 4.77 3.73 28%
12500 1.36 1.02 66%
20 0.075 0.074 0% (so startup time is unchanged)
That's without really finishing the optimization. Things still to do:
* Eliminate all the fromRawFilePath, toRawFilePath, encodeBS,
decodeBS conversions.
* Use versions of IO actions like getFileStatus that take a RawFilePath.
* Eliminate some Data.ByteString.Lazy.toStrict, which is a slow copy.
* Use ByteString for parsing git config to speed up startup.
It's likely several of those will speed up git-annex find further.
And other commands will certianly benefit even more.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
Most of the individual logs are not converted yet, only presense logs
have an efficient ByteString Builder implemented so far. The rest
convert to and from String.
Can be used to override the default timestamps used in log files in the
git-annex branch. This is a dangerous environment variable; use with
caution.
Note that this only affects writing to the logs on the git-annex branch.
It is not used for metadata in git commits (other env vars can be set for
that).
There are many other places where timestamps are still used, that don't
get committed to git, but do touch disk. Including regular timestamps
of files, and timestamps embedded in some files in .git/annex/, including
the last fsck timestamp and timestamps in transfer log files.
A good way to find such things in git-annex is to get for getPOSIXTime and
getCurrentTime, although some of the results are of course false positives
that never hit disk (unless git-annex gets swapped out..)
So this commit does NOT necessarily make git-annex comply with some HIPPA
privacy regulations; it's up to the user to determine if they can use it in
a way compliant with such regulations.
Benchmarking: It takes 0.00114 milliseconds to call getEnv
"GIT_ANNEX_VECTOR_CLOCK" when that env var is not set. So, 100 thousand log
files can be written with an added overhead of only 0.114 seconds. That
should be by far swamped by the actual overhead of writing the log files
and making the commit containing them.
This commit was supported by the NSF-funded DataLad project.
Implemented with no additional overhead of compares etc.
This is safe to do for presence logs because of their locality of change;
a given repo's presence logs are only ever changed in that repo, or in a
repo that has just been actively changing the content of that repo.
So, we don't need to worry about a split-brain situation where there'd
be disagreement about the location of a key in a repo. And so, it's ok to
not update the timestamp when that's the only change that would be made
due to logging presence info.
Wrote nice pure transition calculator, and ugly code to stage its results
into the git-annex branch. Also had to split up several Log modules
that Annex.Branch needed to use, but that themselves used Annex.Branch.
The transition calculator is limited to looking at and changing one file at
a time. While this made the implementation relatively easy, it precludes
transitions that do stuff like deleting old url log files for keys that are
being removed because they are no longer present anywhere.
This needs to run git log on the location log files to get at all past
versions of the file, which tends to be a bit slow.
It would be possible to make a version optimised for showing the location
logs for every key. That would only need to run git log once, so would be
faster, but it would need to process an enormous amount of data, so
would not speed up the individual file case.
In the future it would be nice to support log --format. log --json also
doesn't work right yet.
Avoid ever using read to parse a non-haskell formatted input string.
show :: Key is arguably still show abuse, but displaying Keys as filenames
is just too useful to give up.
