Which is the same as the git merge option.
After last commit, this turns out to be needed in the test suite, and when
doing git-annex import from special remote, followed by a git-annex merge.
Sponsored-by: Svenne Krap on Patreon
* sync: When --quiet is used, run git commit, push, and pull without
their ususual output.
* merge: When --quiet is used, run git merge without its usual output.
This might also make --quiet work better for some other commands
that make commits, like git-annex adjust.
Sponsored-by: Kevin Mueller on Patreon
It was making the borgrepo path absolute.. even when it was a ssh
repository.
Made BorgRepo a newtype, to guard against accidentially treating it like a
FilePath.
Sponsored-by: Graham Spencer on Patreon
Fix a bug that prevented getting content from a repository that started out
as a bare repository, or had annex.crippledfilesystem set, and was
converted to a non-bare repository.
This unfortunately means that inAnnex check gets slowed down by a stat call
in normal repos when the content is not present. Oh well, such is the cost
of backwards compatability with old mistakes.
Sponsored-by: Mark Reidenbach on Patreon
Handles keys that are substrings of other keys, as well as pointer files
that contain a newline after the key.
Note that -S does not match regexp, while -G does by default. Docs are
not clear, determined experimentally. The only other difference in
changing to -G is that if a file used to contain the key and changed
in some way, while still containing the key, -G will match and -S would
not. So eg, annex links that git annex fix rewrites will match, and
files that change lock status will match. Which is an improvement anyway.
Sponsored-by: Jochen Bartl on Patreon
assistant: When adding non-large files to git, honor annex.delayadd
configuration.
Also, don't add non-large files to git when they are still
being written to. This came for free, since the changes to non-large
files get queued up with the ones to large files, and run through the lsof
check.
Sponsored-by: Luke Shumaker on Patreon
init: Fix misbehavior when core.sharedRepository = group that caused it to
enter an adjusted branch. (Reversion in version 8.20210630)
Commit 4b1b9d7a83 made init call
freezeContent in case there was a hook that could prevent writing in
situations where perms don't. But with the above git config, freezeContent
does not prevent write at all. So init needs to do what freezeContent does
with a non-shared git config.
Or init could check for that config, and skip the probing, since it
won't actually be preventing write to any files. But that would make init
too aware if details of Annex.Perms, and also would break if the git config
were changed after init.
Sponsored-by: Dartmouth College's Datalad project
Fixed bug that interrupting git-annex repair (or assistant) while it was
fixing repository corruption would lose objects that were contained in pack
files.
Unpack all pack files and move objects into place *before* deleting the
pack files. The old approach moved the pack files to a temp directory
before unpacking them, which was not interruption safe.
Sponsored-By: Jochen Bartl on Patreon
Forces eg, download with youtube-dl without falling back to raw download.
Since youtube-dl failing due to an url not being supported is difficult to
distinguish from it failing due to being blocked in some way, this can be
useful to avoid the fallback of git-annex downloading the raw web page and
adding that.
Since --raw also prevents using special remotes, --no-raw also
allows special remote downloads. Although it's always possible that some
special remote may claim an url and fall back to raw download of the
content, which --no-raw cannot prevent.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
Dropping an object with drop --unused or dropunused will mark it as
dead, preventing fsck --all from complaining about it after it's been
dropped from all repositories.
If another repository still has a copy, it won't be treated as dead
until it's also dropped from there.
The drop has to use --unused, can't be --key or something else, because
this indicates that the user has recently ran git-annex unused. If it
checked the unused log on every drop, bad things would happen when the
unused log was out of date, eg a file used to be unused but then got
re-added. Marking such a file as dead could be confusing. When the user
uses --unused/dropunused, they must consider the unused information to be
up-to-date.
The particular workflow this enables is:
git annex add foo
git annex unannex foo
git annex unused
git annex drop --unused / dropunused
git annex fsck --all # no warnings
The docs for git-annex unannex say to use git-annex unused and dropunused,
so the user should be pointed in this direction when they want to undo an
accidental add.
Sponsored-by: Brock Spratlen on Patreon
Transfers from or to a local git repo could fail without a reason being
given, if the content failed to verify, or if the object file's stat
changed while it was being copied. Now display messages in these cases.
Sponsored-by: Jack Hill on Patreon
Freeze first sets the file perms, and then runs
freezecontent-command. Thaw runs thawcontent-command before
restoring file permissions. This is in case the freeze command
prevents changing file perms, as eg setting a file immutable does.
Also, changing file perms tends to mess up previously set ACLs.
git-annex init's probe for crippled filesystem uses them, so if file perms
don't work, but freezecontent-command manages to prevent write to a file,
it won't treat the filesystem as crippled.
When the the filesystem has been probed as crippled, the hooks are not
used, because there seems to be no point then; git-annex won't be relying
on locking annex objects down. Also, this avoids them being run when the
file perms have not been changed, in case they somehow rely on
git-annex's setting of the file perms in order to work.
Sponsored-by: Dartmouth College's Datalad project
Remove closed bugs and todos that were last edited or commented before 2020.
Except for ones tagged projects/* since projects like datalad want to keep
around records of old deleted bugs longer.
Command line used:
for f in $(grep -l '|done\]\]' -- ./*.mdwn); do if ! grep -q "projects/" "$f"; then d="$(echo "$f" | sed 's/.mdwn$//')"; if [ -z "$(git log --since=01-01-2020 --pretty=oneline -- "$f")" -a -z "$(git log --since=01-01-2020 --pretty=oneline -- "$d")" ]; then git rm -- "./$f" ; git rm -rf "./$d"; fi; fi; done
for f in $(grep -l '\[\[done\]\]' -- ./*.mdwn); do if ! grep -q "projects/" "$f"; then d="$(echo "$f" | sed 's/.mdwn$//')"; if [ -z "$(git log --since=01-01-2020 --pretty=oneline -- "$f")" -a -z "$(git log --since=01-01-2020 --pretty=oneline -- "$d")" ]; then git rm -- "./$f" ; git rm -rf "./$d"; fi; fi; done
sync: Partly work around github behavior that first branch to be pushed to
a new repository is assumed to be the head branch, by not pushing
synced/git-annex first.
github expects master (or whatever the name is) to be pushed first, but
git-annex sync can't, because it's got to also support pushes to non-bare
repos where pushing master fails, as explained in the big comment. So
pushing synced/master is not entirely a fix, but at least it makes github
default to a branch with the stuff the user expects in it, not a bunch of
annex log files.
Aside from fixing github to not make this assumption, or improving
the git push protocol to include what the current HEAD is, the only other
approach I can think of is to identify git push's progress messages and
display those when pushing master, while filtering out error messages
about non-fast-forward etc. But git doesn't provide a way to separate out
or identify its progress messages.
Sponsored-by: Luke Shumaker on Patreon
