It can't enable or disable debug output, after recent changes, w/o
restarting git-annex, or perhaps messing with the Annex monad's
internals. Doesn't seem worth supporting it any longer.
This uses a DebugSelector, rather than debug levels, which will allow
for a later option like --debug-from=Process to only
see debuging about running processes.
The module name that contains the thing being debugged is used as the
DebugSelector (in most cases; does not need to be a hard and fast rule).
Debug calls were changed to add that. hslogger did not display
that first parameter to debugM, but the DebugSelector does get
displayed.
Also fastDebug will allow doing debugging in places that are used in
tight loops, with the DebugSelector coming from the Annex Reader
essentially for free. Not done yet.
Values in AnnexRead can be read more efficiently, without MVar overhead.
Only a few things have been moved into there, and the performance
increase so far is not likely to be noticable.
This is groundwork for putting more stuff in there, particularly a value
that indicates if debugging is enabled.
The obvious next step is to change option parsing to not run in the
Annex monad to set values in AnnexState, and instead return a pure value
that gets stored in AnnexRead.
Not yet used, but allows getting the size of items in the tree fairly
cheaply.
I noticed that CmdLine.Seek uses ls-tree and the feeds the files into
another long-running process to check their size. That would be an
example of a place that might be sped up by using this. Although in that
particular case, it only needs to know the size of unlocked files, not
locked. And since enabling --long probably doubles the ls-tree runtime
or more, the overhead of using it there may outwweigh the benefit.
This is conceptually very simple, just making a 1 that was hard coded be
exposed as a config option. The hard part was plumbing all that, and
dealing with complexities like reading it from git attributes at the
same time that numcopies is read.
Behavior change: When numcopies is set to 0, git-annex used to drop
content without requiring any copies. Now to get that (highly unsafe)
behavior, mincopies also needs to be set to 0. It seemed better to
remove that edge case, than complicate mincopies by ignoring it when
numcopies is 0.
This commit was sponsored by Denis Dzyubenko on Patreon.
These don't have importTree in their config, because they don't support
tree import, but they do still support import, and do not support export
or key/value modification.
Don't want to try to use these remotes as key/value remotes, which will
surely fail. It only recently became possible for importtree to be set
w/o exporttree, so before this code was ok.
(cherry picked from commit 97599cb0f7f4115aa5a3e81a91ee3d1d6c52dc84)
git -c was already propagated via environment, but need this for
consistency.
Also, notice it does not use gitAnnexChildProcess to run the
transferrer. So nothing is done about avoid it taking the
pid lock. It's possible that the caller is already doing something that
took the pid lock, and if so, the transferrer will certianly fail,
since it needs to take the pid lock too. This may prevent combining
annex.stalldetection with annex.pidlock, but I have not verified it's
really a problem. If it was, it seems git-annex would have to take
the pid lock when starting a transferrer, and hold it until shutdown,
or would need to take pid lock when starting to use a transferrer,
and hold it until done with a transfer and then drop it. The latter
would require starting the transferrer with pid locking disabled for the
child process, so assumes that the transferrer does not do anyting that
needs locking when not running a transfer.
Done on unix, could not implement it on windows quite.
The signal library gets part of the way needed for windows.
But I had to open https://github.com/pmlodawski/signal/issues/1 because
it lacks raiseSignal.
Also, I don't know what the equivilant of getProcessGroupIDOf is on
windows. And System.Process does not provide a way to send any signal to
a process group except for SIGINT.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Rather than using Read/Show, which would force me to preserve data types
into the future.
I considered just deriving json and sending that, but I don't much like
deriving json with data types that have named constructors (like Key
does) because again it locks in data type details.
So instead, used SimpleProtocol, with a fairly complex and unreadable
protocol. But it is as efficient as the p2p protocol at least, and as
future proof.
(Writing my own custom json instances would have worked but I thought
of it too late and don't want to do all the work twice. The only real
benefit might be that aeson could be faster.)
Note that, when a new protocol request type is added later, git-annex
trying to use it will cause the git-annex transferrer to display a
protocol error message. That seems ok; it would only happen if a new
git-annex found an old version of itself in PATH or the program
file. So it's unlikely, and all it can do anyway is display an error.
(The error message could perhaps be improved..)
This commit was sponsored by Jack Hill on Patreon.
New config annex.stalldetection, remote.name.annex-stalldetection, which
can be used to deal with remotes that stall during transfers, or are
sometimes too slow to want to use.
This commit was sponsored by Luke Shumaker on Patreon.
Seems to work! Even progress bars. Have not tested prompting or various
error message displays yet.
transferkeys had to be made to operate in different modes for the
Assistant and Annex monads. A bit ugly, but it did relegate that
really ugly Database.Keys.closeDb in transferkeys to only the assistant
code path.
This commit was sponsored by Noam Kremen.
This old code will now be useful for git-annex beyond the assistant.
git-annex won't use the CheckTransferrer part, and won't run transferkeys
as a batch process, and will want withTransferrer to not shut down
transferkeys processes. Still, the rest of this is a good fit for what I
need now.
Also removed some dead code, and simplified a little bit.
This commit was sponsored by Mark Reidenbach on Patreon.
That seems to be the last thing needed for message serialization.
Although it's only used in the assistant currently, so hard to tell if I
forgot something.
At this point, it should be possible to start using transferkeys
when performing transfers, which will allow killing a transferkeys
process if a transfer times out or stalls. But that's for another day.
This commit was sponsored by Ethan Aubin.
Any given transfer can only display 1 progress meter at a time, or so
this code assumes. In some cases, there are progress meters for
different stages of a transfer, perhaps, and that is supported by this.
This commit was sponsored by Ethan Aubin.
Necessarily threw out the old protocol, so if an old git-annex assistant
is running, and starts a transferkeys from the new git-annex, it would
fail. But, that seems unlikely; the assistant starts up transferkeys
processes and then keeps them running. Still, may need to test that
scenario.
The new protocol is simple read/show and looks like this:
TransferRequest Download (Right "origin") (Key {keyName = "f8f8766a836fb6120abf4d5328ce8761404e437529e997aaa0363bdd4fecd7bb", keyVariety = SHA2Key (HashSize 256) (HasExt True), keySize = Just 30, keyMtime = Nothing, keyChunkSize = Nothing, keyChunkNum = Nothing}) (AssociatedFile (Just "foo"))
TransferOutput (ProgressMeter (Just 30) (MeterState {meterBytesProcessed = BytesProcessed 0, meterTimeStamp = 1.6070268727892535e9}) (MeterState {meterBytesProcessed = BytesProcessed 30, meterTimeStamp = 1.6070268728043e9}))
TransferOutput (OutputMessage "(checksum...) ")
TransferResult True
Granted, this is not optimally fast, but it seems good enough, and is
probably nearly as fast as the old protocol anyhow.
emitSerializedOutput for ProgressMeter is not yet implemented. It needs
to somehow start or update a progress meter. There may need to be a new
message that allocates a progress meter, and then have ProgressMeter
update it.
This commit was sponsored by Ethan Aubin
9cb250f7be got the ones in RawFilePath,
but there were others that used the one from unix-compat, which fails at
runtime on windows. To avoid this,
import System.PosixCompat.Files hiding removeLink
This commit was sponsored by Ethan Aubin.
Prevent windows assistant from trying (and failing) to upgrade itself,
which has never been supported on windows.
The new windows build is made with UPGRADE_LOCATION set, which enabled this
code path that had never run on windows before, and doesn't work. I don't
want to try to support self-upgrade on windows, or generally on other OS's
than the ones where its working, so added a check for that. This way the
build can keep setting UPGRADE_LOCATION and if some later git-annex does
learn how to upgrade itself on some OS, it won't need changing the build
setup.
Lots of nice wins from this in avoiding unncessary work, and I think
nothing got slower.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
nukeFile replaced with removeWhenExistsWith removeLink, which allows
using RawFilePath. Utility.Directory cannot use RawFilePath since setup
does not depend on posix.
This commit was sponsored by Graham Spencer on Patreon.
Had to split out some modules because getWorkingDirectory needs unix,
which is not a build-dep of configure.
This commit was sponsored by Brock Spratlen on Patreon.
add, addurl, importfeed, import: Added --no-check-gitignore option
for finer grained control than using --force.
(--force is used for too many different things, and at least one
of these also uses it for something else. I would like to reduce
--force's footprint until it only forces drops or a few other data
losses. For now, --force still disables checking ignores too.)
addunused: Don't check .gitignores when adding files. This is a behavior
change, but I justify it by analogy with git add of a gitignored file
adding it, asking to add all unused files back should add them all back,
not skip some. The old behavior was surprising.
In Command.Lock and Command.ReKey, CheckGitIgnore False does not change
behavior, it only makes explicit what is done. Since these commands are run
on annexed files, the file is already checked into git, so git add won't
check ignores.
The use case of this field is mostly to support -J combined with --json.
When that is implemented, a user will be able to look at the field to
determine which of the requests they have sent it corresponds to.
The field typically has a single value in its list, but in some cases
mutliple values (eg 2 command-line params) are combined together and the
list will have more.
Note that json parsing was already non-strict, so old git-annex metadata
--json --batch can be fed json produced by the new git-annex and will
not stumble over the new field.
No behavior changes (hopefully), just adding SeekInput and plumbing it
through to the JSON display code for later use.
Over the course of 2 grueling days.
withFilesNotInGit reimplemented in terms of seekHelper
should be the only possible behavior change. It seems to test as
behaving the same.
Note that seekHelper dummies up the SeekInput in the case where
segmentPaths' gives up on sorting the expanded paths because there are
too many input paths. When SeekInput later gets exposed as a json field,
that will result in it being a little bit wrong in the case where
100 or more paths are passed to a git-annex command. I think this is a
subtle enough problem to not matter. If it does turn out to be a
problem, fixing it would require splitting up the input
parameters into groups of < 100, which would make git ls-files run
perhaps more than is necessary. May want to revisit this, because that
fix seems fairly low-impact.
So these special remotes are always supported.
IIRC these build flags were added because the dep chains were a bit too
long, or perhaps because the libraries were not available in Debian stable,
or something like that. That was long ago, those reasons no longer apply,
and users get confused when builtin special remotes are not available, so
it seems best to remove the build flags now.
If this does cause a problem it can be reverted of course..
This commit was sponsored by Jochen Bartl on Patreon.
This was already prevented in other ways, but as seen in commit
c30fd24d91, those were a bit fragile.
And I'm not sure races were avoided in every case before. At least a
race between two separate git-annex processes, dropping the same
content, seemed possible.
This way, if locking fails, and the content is not present, it will
always do the right thing. Also, it avoids the overhead of an unncessary
inAnnex check for every file.
This commit was sponsored by Denis Dzyubenko on Patreon.
So stop documenting it, and stop offering it as a choice in the assistant.
Removed the code that parses it into S3.ReducedRedundancy, because
S3.OtherStorageClass with the value will work just the same and avoids a
special case for a deprecated this.
