Works around this bug in unix-compat:
https://github.com/jacobstanley/unix-compat/issues/56
getFileStatus and other FilePath using functions in unix-compat do not do
UNC conversion on Windows.
Made Utility.RawFilePath use convertToWindowsNativeNamespace to do the
necessary conversion on windows to support long filenames.
Audited all imports of System.PosixCompat.Files to make sure that no
functions that operate on FilePath were imported from it. Instead, use
the equvilants from Utility.RawFilePath. In particular the
re-export of that module in Common had to be removed, which led to lots
of other changes throughout the code.
The changes to Build.Configure, Build.DesktopFile, and Build.TestConfig
make Utility.Directory not be needed to build setup. And so let it use
Utility.RawFilePath, which depends on unix, which cannot be in
setup-depends.
Sponsored-by: Dartmouth College's Datalad project
path to a bare repo when git config is not allowed to list the configs
due to the CVE-2022-24765 fix.
That resulted in a confusing error message, and prevented the nice
message that explains how to mark the repo as safe to use.
Made isBare a tristate so that the case where core.bare is not returned can
be handled.
The handling in updateLocation is to check if the directory
contains config and objects and if so assume it's bare.
Note that if that heuristic is somehow wrong, it would construct a repo
that thinks it's bare but is not. That could cause follow-on problems,
but since git-annex then checks checkRepoConfigInaccessible, and skips
using the repo anyway, a wrong guess should not be a problem.
Sponsored-by: Luke Shumaker on Patreon
S3: Support a region= configuration useful for some non-Amazon S3
implementations. This feature needs git-annex to be built with aws-0.24.
datacenter= sets both the AWS hostname and region in one setting, which is
easy when using AWS, but not useful for other hosts. So kept datacenter
as-is, but added this additional config.
Sponsored-By: Brett Eisenberg on Patreon
Note that when this is specified and an older git-annex is used to
enableremote such a special remote, it will simply ignore the cost= field
and use whatever the default cost is.
In passing, fixed adb to support the remote.name.cost and
remote.name.cost-command configs.
Sponsored-by: Dartmouth College's DANDI project
When a web special remote does not have urlinclude/urlexclude
configured, make it respect the configuration of other web special
remotes and avoid using urls that match the config of another.
Note that the other web special remote does not have to be enabled.
That seems ok, it would have been extra work to check for only ones that
are enabled.
The implementation does mean that the web special remote re-parses
its own config once at startup, as well as re-parsing the configs of any
other web special remotes. This should be a very small slowdown
unless there are lots of web special remotes.
Sponsored-by: Dartmouth College's DANDI project
Allow initremote of additional special remotes with type=web, in addition
to the default web special remote.
When --sameas=web is used, these provide additional names for the web
special remote, and may also have their own additional configuration
(once there is any for the web special remote) and cost.
Sponsored-by: Dartmouth College's DANDI project
AFAICS all git-annex builds are using the git-lfs library not the vendored
copy.
Debian stable does have a too old haskell-git-lfs package to be able to
build git-annex from source, but there is not currently a backport of a
recent git-annex to Debian stable. And if they update the backport at some
point, they should be able to backport the library too.
Sponsored-by: Svenne Krap on Patreon
Improve handling of some .git/annex/ subdirectories being on other
filesystems, in the bittorrent special remote, and youtube-dl integration,
and git-annex addurl.
The only one of these that I've confirmed to be a problem is in the
bittorrent special remote when .git/annex/tmp and .git/annex/othertmp are
on different filesystems.
As well as auditing for renameFile, also audited for createLink, all of
those are ok as are the other remaining renameFile calls. Also audited all
code paths that use .git/annex/othertmp, and did not find any other
cross-device problems. So, removing mention of othertmp needing to be on
the same device.
Sponsored-by: Dartmouth College's Datalad project
aws-0.23 has been released.
When built with an older aws, initremote will error out when run
with signature=anonymous. And when a remote has been initialized with
that by a version of git-annex that does support it, older versions will
fail when the remote is accessed, with a useful error message.
Sponsored-by: Dartmouth College's DANDI project
The flush was only done Annex.run' to make sure that the queue was flushed
before git-annex exits. But, doing it there means that as soon as one
change gets queued, it gets flushed soon after, which contributes to
excessive writes to the database, slowing git-annex down.
(This does not yet speed git-annex up, but it is a stepping stone to
doing so.)
Database queues do not autoflush when garbage collected, so have to
be flushed explicitly. I don't think it's possible to make them
autoflush (except perhaps if git-annex sqitched to using ResourceT..).
The comment in Database.Keys.closeDb used to be accurate, since the
automatic flushing did mean that all writes reached the database even
when closeDb was not called. But now, closeDb or flushDb needs to be
called before stopping using an Annex state. So, removed that comment.
In Remote.Git, change to using quiesce everywhere that it used to use
stopCoProcesses. This means that uses on onLocal in there are just as
slow as before. I considered only calling closeDb on the local git remotes
when git-annex exits. But, the reason that Remote.Git calls stopCoProcesses
in each onLocal is so as not to leave git processes running that have files
open on the remote repo, when it's on removable media. So, it seemed to make
sense to also closeDb after each one, since sqlite may also keep files
open. Although that has not seemed to cause problems with removable
media so far. It was also just easier to quiesce in each onLocal than
once at the end. This does likely leave performance on the floor, so
could be revisited.
In Annex.Content.saveState, there was no reason to close the db,
flushing it is enough.
The rest of the changes are from auditing for Annex.new, and making
sure that quiesce is called, after any action that might possibly need
it.
After that audit, I'm pretty sure that the change to Annex.run' is
safe. The only concern might be that this does let more changes get
queued for write to the db, and if git-annex is interrupted, those will be
lost. But interrupting git-annex can obviously already prevent it from
writing the most recent change to the db, so it must recover from such
lost data... right?
Sponsored-by: Dartmouth College's Datalad project
S3: Speed up importing from a large bucket when fileprefix= is set by only
asking for files under the prefix.
getBucket still returns the files with the prefix included, so the rest of
the fileprefix stripping still works unchanged.
Sponsored-by: Dartmouth College's DANDI project
This can be used, for example, with importtree=yes to import from a public
bucket.
This needs a patch that has not yet landed in the aws library, and will
need to be adjusted to support compiling with old versions of the library,
so is not yet suitable for merging.
See https://github.com/aristidb/aws/pull/281
The stack.yaml changes are provided to show how to build against the aws
fork and will need to be reverted as well.
Sponsored-by: Dartmouth College's DANDI project
Combined with commit 0ffc59d341, this
fixes the case where there are duplicate files on the special remote,
and the first gets modified/deleted, while the second is still present.
directory, adb: Fixed a bug when importtree=yes, and multiple files in the
special remote have the same content, that caused it to refuse to get a
file from the special remote, incorrectly complaining that it had changed,
due to only accepting the inode+mtime of one file (that was since modified
or deleted) and not accepting the inode+mtime of other duplicate files.
Sponsored-by: Max Thoursie on Patreon
This partly fixes an issue where there are duplicate files in the
special remote, and the first file gets swapped with another duplicate,
or deleted. The swap case is fixed by this, the deleted case will need
other changes.
This makes retrieveExportWithContentIdentifier take a list of allowed
ContentIdentifier, same as storeExportWithContentIdentifier,
removeExportWithContentIdentifier, and
checkPresentExportWithContentIdentifier.
Of the special remotes that support importtree, borg is a special case
and does not use content identifiers, S3 I assume can't get mixed up
like this, directory certainly has the problem, and adb also appears to
have had the problem.
Sponsored-by: Graham Spencer on Patreon
Improve handling of directory special remotes with importtree=yes whose
ignoreinode setting has been changed. (By either enableremote or by
upgrading to commit 3e2f1f73cbc5fc10475745b3c3133267bd1850a7.)
When getting a file from such a remote, accept the content that would have
been accepted with the previous ignoreinode setting.
After a change to ignoreinode, importing a tree from the remote will
re-import and generate new content identifiers using the new config. So
when ignoreinode has changed to no, the inodes will be learned, and after
that point, a change in an inode will be detected as a change. Before
re-importing, a change in an inode will be ignored, as it was before the
ignoreinode change. This seems acceptble, because the user can re-import
immediately if they urgently need to add inodes. And if not, they'll
do it sometime, presumably, and the change will take effect then.
Sponsored-by: Erik Bjäreholt on Patreon
autoEnableSpecialRemotes runs a subprocess, and if the uuid for a git
remote has not been probed yet, that will do a http get that will prompt
for a password. And then the parent process will subsequently prompt
for a password when getting annexed files from the remote.
So the solution is for autoEnableSpecialRemotes to run remoteList before
the subprocess, which will probe for the uuid for the git remote in the
same process that will later be used to get annexed files.
But, Remote.Git imports Annex.Init, and Remote.List imports Remote.Git,
so Annex.Init cannot import Remote.List. Had to pass remoteList into
functions in Annex.Init to get around this dependency loop.
Fix crash importing from a directory special remote that contains a broken
symlink.
The crash was in listImportableContentsM but some other places in
Remote.Directory also seemed like they could have the same problem.
Also audited for other places that have such a problem. Not all calls
to getFileStatus are bad, in some cases it's better to crash on something
unexpected. For example, `git-annex import path` when the path is a broken
symlink should crash, the same as when it does not exist. Many of the
getFileStatus calls are like that, particularly when they involve
.git/annex/objects which should never have a broken symlink in it.
Fixed a few other possible cases of the problem.
Sponsored-by: Lawrence Brogan on Patreon
Too big a footgun.
This does not prevent attackers who can write to the directory being
imported from racing the check. But they can cause anything to be imported
anyway, so would be limited to getting the legacy import to follow into a
directory they do not write to, and move files out of it into the annex.
(The directory special remote does not have that problem since it does not
move files.)
Sponsored-by: Jack Hill on Patreon
This should not change the behavior of it, unless there are multiple top
directories, and then it should behave the same as if there was a single
top directory that was actually above the directory to be created.
Sponsored-by: Dartmouth College's Datalad project
WIP: This is mostly complete, but there is a problem: createDirectoryUnder
throws an error when annex.dbdir is set to outside the git repo.
annex.dbdir is a workaround for filesystems where sqlite does not work,
due to eg, the filesystem not properly supporting locking.
It's intended to be set before initializing the repository. Changing it
in an existing repository can be done, but would be the same as making a
new repository and moving all the annexed objects into it. While the
databases get recreated from the git-annex branch in that situation, any
information that is in the databases but not stored in the branch gets
lost. It may be that no information ever gets stored in the databases
that cannot be reconstructed from the branch, but I have not verified
that.
Sponsored-by: Dartmouth College's Datalad project
Since bup split is not concurrency safe.
Used a lock file so that 2 git-annex processes only run one bup split
between them (per bup repo).
(Concurrent writes from different git-annex repository clones to the same
bup repo could still have concurrency problems.)
Sponsored-by: Noam Kremen on Patreon
git-annex copy --to a http remote will of course fail, as that's not
supported. But git-annex copy first checks if the content is already
present in the remote, and that threw a "not found".
Looks to me like other remotes that use Url.checkBoth in their checkPresent
do just return false when it fails. And Url.checkBoth does display
errors when unusual errors occur. So I'm pretty sure removing this error
message is ok.
Sponsored-by: Jarkko Kniivilä on Patreon
It seems worth noting here that I emailed bup's author about bup split
being noisy on stderr even with -q in approximately 2011. That never got
fixed. Its current repo on github only accepts pull requests, not bug
reports. Needing to add such complexity to deal with such a longstanding
unfixed issue is not fun.
Sponsored-by: Kevin Mueller on Patreon
bup split outputs to stderr even with -q. This was discarded when using -J,
but it was still outputting when not using -J, and so was git-annex.
Sponsored-by: Nicholas Golder-Manning on Patreon
It does not make sense for either; importing from an existing bucket should
not write to it. And the user may not have write access at all. And exporting to
a bucket should not write other files.
Also this prevents the uuid file being imported after being written.
Sponsored-by: Dartmouth College's DANDI project
To avoid using find -printf, which was first supported in Android around
2019-2020.
Probing seems too fragile, and execing stat once per file is too slow to do
when there's a faster way available, which brought me to an option...
Sponsored-by: Brett Eisenberg on Patreon
On Windows, that does not support long paths
https://github.com/jacobstanley/unix-compat/issues/56
Instead, use System.Directory.renamePath, which does support long paths.
Sponsored-by: Dartmouth College's Datalad project
Improve handling of parallelization with -J when copying content from/to a
git remote that is a local path.
Sponsored-by: Nicholas Golder-Manning on Patreon
Some small wins, almost certianly swamped by the system calls, but still
worthwhile progress on the RawFilePath conversion.
Sponsored-by: Erik Bjäreholt on Patreon
