This is to avoid breakage when upgrading or downgrading git-annex with a
process running that uses the interface. It's better to keep the
compatability code for a few years than worry about such breakage.
This commit was sponsored by Brett Eisenberg on Patreon.
New config annex.stalldetection, remote.name.annex-stalldetection, which
can be used to deal with remotes that stall during transfers, or are
sometimes too slow to want to use.
This commit was sponsored by Luke Shumaker on Patreon.
This old code will now be useful for git-annex beyond the assistant.
git-annex won't use the CheckTransferrer part, and won't run transferkeys
as a batch process, and will want withTransferrer to not shut down
transferkeys processes. Still, the rest of this is a good fit for what I
need now.
Also removed some dead code, and simplified a little bit.
This commit was sponsored by Mark Reidenbach on Patreon.
Any given transfer can only display 1 progress meter at a time, or so
this code assumes. In some cases, there are progress meters for
different stages of a transfer, perhaps, and that is supported by this.
This commit was sponsored by Ethan Aubin.
Added annex.adjustedbranchrefresh git config to update adjusted branches
set up by git-annex adjust --unlock-present/--hide-missing.
Note, in a few cases, I was not able to make the adjusted branch
be updated in calls to moveAnnex, because information about what
file corresponds to a key is not available. They are:
* If two files point to one file, then eg, `git annex get foo` will
update the branch to unlock foo, but will not unlock bar, because it
does not know about it. Might be fixable by making `git annex get
bar` do something besides skipping bar?
* git-annex-shell recvkey likewise (so sends over ssh from old versions
of git-annex)
* git-annex setkey
* git-annex transferkey if the user does not use --file
* git-annex multicast sends keys with no associated file info
Doing a single full refresh at the end, after any incremental refresh,
will deal with those edge cases.
This will let a module that Annex.Content imports use inAnnex.
Unsure yet if I will need that, but this split still seems to make
sense, and Annex.Content was way too long so splitting it is good.
All properties changed to use them, except for
prop_encode_c_decode_c_roundtrip, which already filtered to ascii
for other reasons.
A few modules had to be split out, because Setup does not build-depend
on QuickCheck.
Had to split out some modules because getWorkingDirectory needs unix,
which is not a build-dep of configure.
This commit was sponsored by Brock Spratlen on Patreon.
John Thorvald Wodder II got it working using
https://github.com/datalad/file-windows so don't hard-disable it.
The stack.yaml still disables this build flag, because it needs an extra
C library to be installed, which stack cannot automate.
When I put in Haskell98 this spring, I was under the mistaken
apprehension that ghc defaulted to that. But it actually its default
is a third mode, which is closer to Haskell2010 but with some differences.
The manual says "By default, GHC mainly aims to behave (mostly) like a
Haskell 2010 compiler"
Fixed two cases where the Haskell98 do indentation flexability let
wrongly indented code build. That is one of the places where
ghc does not behave like Haskell2010 by default.
The other place that I think I was concerned about, is GHC manual
section 19.1.1.3. Expressions and patterns. But that only seems to
affect code using bottoms, so would only affect pure functions throwing
an error, which I don't think git-annex does in many places as it's
pretty horrid style. And it would only affect rare cases like shown in
that section. If it did happen, it would mean that the error was not
thrown before specifying Haskell98, and then was. Haskell2010 behaves
the same as Haskell98.
This commit was sponsored by Denis Dzyubenko on Patreon.
Only turning it off when the criterion library is not installed.
Not enabled for osx or i386ancient yet since that will need some
invesitgation to update their respective stack.yaml files.
So these special remotes are always supported.
IIRC these build flags were added because the dep chains were a bit too
long, or perhaps because the libraries were not available in Debian stable,
or something like that. That was long ago, those reasons no longer apply,
and users get confused when builtin special remotes are not available, so
it seems best to remove the build flags now.
If this does cause a problem it can be reverted of course..
This commit was sponsored by Jochen Bartl on Patreon.
"http" was too generic and easy to confuse with web. The new name makes
clear it's used in addition to some other remote. And other protocols
can use the same naming scheme.
This adds a dep on hashable, but it's a free dependency, since
unordered-containers already pulled it in.
Using unordered-containers for the set seems to make sense, since it
hashes and bloom filter hashes too. (Though different hashes.)
I dunno, never quite know if I should use unordered-containers or containers.
Otherwise use the vendored copy as before.
The library is in Debian testing but not stable. Once it reaches
stable, the vendored copy can be removed.
Did not add it to debian/control because IIRC that's used to build
git-annex on stable too, possibly. However, the Debian maintainer will
probably want to make the package depend on libghc-http-client-restricted-dev
This commit was sponsored by Ilya Shlyakhter on Patreon.
Otherwise use the vendored copy as before.
The library is in Debian testing but not stable. Once it reaches
stable, the vendored copy can be removed.
Did not add it to debian/control because IIRC that's used to build
git-annex on stable too, possibly. However, the Debian maintainer will
probably want to make the package depend on libghc-git-lfs-dev.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Network.HTTP.Client exports makeConnection since 0.5.3.
Debian stable has a newer version than 0.5.3, so bumping the
min version seems better than adding an ifdef.
Remove old code that can be trivially implemented using async in a much
nicer way (that is async exception safe).
I've audited all forkOS calls (except for ones in the assistant),
and this was the last remaining one that is not async exception safe.
The rest look ok to me.
Try to enable special remotes configured with autoenable=yes when git-annex
auto-initialization happens in a new clone of an existing repo. Previously,
git-annex init had to be explicitly run to enable them. That was a bit of a
wart of a special case for users to need to keep in mind.
Special remotes cannot display anything when autoenabled this way, to avoid
interfering with the output of git-annex query commands.
Any error messages will be hidden, and if it fails, nothing is displayed.
The user will realize the remote isn't enable when they try to use it,
and can run git-annex init manually then to try the autoenable again and
see what failed.
That seems like a reasonable approach, and it's less complicated than
communicating something across a pipe in order to display it as a side
message. Other reason not to do that is that, if the first command the
user runs is one like git-annex find that has machine readable output,
any message about autoenable failing would need to not be displayed anyway.
So better to not display a failure message ever, for consistency.
(Had to split out Remote.List.Util to avoid an import cycle.)
* addurl --preserve-filename: New option, uses server-provided filename
without any sanitization, but with some security checking.
Not yet implemented for remotes other than the web.
* addurl, importfeed: Avoid adding filenames with leading '.', instead
it will be replaced with '_'.
This might be considered a security fix, but a CVE seems unwattanted.
It was possible for addurl to create a dotfile, which could change
behavior of some program. It was also possible for a web server to say
the file name was ".git" or "foo/.git". That would not overrwrite the
.git directory, but would cause addurl to fail; of course git won't
add "foo/.git".
sanitizeFilePath is too opinionated to remain in Utility, so moved it.
The changes to mkSafeFilePath are because it used sanitizeFilePath.
In particular:
isDrive will never succeed, because "c:" gets munged to "c_"
".." gets sanitized now
".git" gets sanitized now
It will never be null, because sanitizeFilePath keeps the length
the same, and splitDirectories never returns a null path.
Also, on the off chance a web server suggests a filename of "",
ignore that, rather than trying to save to such a filename, which would
fail in some way.
Extensions got renamed.
Default-Language is required. I had to put Haskell98 because there are
subtle differences between 98 and 2010 and git-annex has always been
built with the default, which was 98 when there was a default. I don't
know how to establish that git-annex will behave the same under 2010.
Avoid running a large number of git cat-file child processes when run with
a large -J value.
This implementation takes care to avoid adding any overhead to git-annex
when run without -J. When run with -J, there is a small bit of added
overhead, to manipulate the resource pool. That optimisation added a
fair bit of complexity.
This does mean that RemoteDaemon.Transport.Tor's call runs it, otherwise
no change, but this is groundwork for doing more such expensive actions
in dupState.
