This is groundwork for making special remotes like borg be skipped by
sync when on an offline drive.
Added AVAILABILITY UNAVAILABLE reponse and the UNAVAILABLERESPONSE extension
to the external special remote protocol. The extension is needed because
old git-annex, if it sees that response, will display a warning
message. (It does continue as if the remote is globally available, which
is acceptable, and the warning is only displayed at initremote due to
remote.name.annex-availability caching, but still it seemed best to make
this a protocol extension.)
The remote.name.annex-availability git config is no longer used any
more, and is documented as such. It was only used by external special
remotes to cache the availability, to avoid needing to start the
external process every time. Now that availability is queried as an
Annex action, the external is only started by sync (and the assistant),
when they actually check availability.
Sponsored-by: Nicholas Golder-Manning on Patreon
Split out two new commands, git-annex pull and git-annex push. Those plus a
git commit are equivilant to git-annex sync.
In a sense, git-annex sync conflates 3 things, and it would have been
better to have push and pull from the beginning and not sync. Although
note that git-annex sync --content is faster than a pull followed by a
push, because it only has to walk the tree once, look at preferred
content once, etc. So there is some value in git-annex sync in speed, as
well as user convenience.
And it would be hard to split out pull and push from sync, as far as the
implementaton goes. The implementation inside sync was easy, just adjust
SyncOptions so it does the right thing.
Note that the new commands default to syncing content, unless
annex.synccontent is explicitly set to false. I'd like sync to also do
that, but that's a hard transition to make. As a start to that
transition, I added a note to git-annex-sync.mdwn that it may start to
do so in a future version of git-annex. But a real transition would
necessarily involve displaying warnings when sync is used without
--content, and time.
Sponsored-by: Kevin Mueller on Patreon
This is by no means complete, but escaping filenames in actionItemDesc does
cover most commands.
Note that for ActionItemBranchFilePath, the value is branch:file, and I
choose to only quote the file part (if necessary). I considered quoting the
whole thing. But, branch names cannot contain control characters, and while
they can contain unicode, git coes not quote unicode when displaying branch
names. So, it would be surprising for git-annex to quote unicode in a
branch name.
The find command is the most obvious command that still needs to be
dealt with. There are probably other places that filenames also get
displayed, eg embedded in error messages.
Some other commands use ActionItemOther with a filename, I think that
ActionItemOther should either be pre-sanitized, or should explicitly not
be used for filenames, so that needs more work.
When --json is used, unicode does not get escaped, but control
characters were already escaped in json.
(Key escaping may turn out to be needed, but I'm ignoring that for now.)
Sponsored-by: unqueued on Patreon
* view: New field?=glob and ?tag syntax that includes a directory "_"
in the view for files that do not have the specified metadata set.
* Added annex.viewunsetdirectory git config to change the name of the
"_" directory in a view.
When in a view using the new syntax, old git-annex will fail to parse the
view log. It errors with "Not in a view.", which is not ideal. But that
only affects view commands.
annex.viewunsetdirectory is included in the View for a couple of reasons.
One is to avoid needing to warn the user that it should not be changed when
in a view, since that would confuse git-annex. Another reason is that it
helped with plumbing the value through to some pure functions.
annex.viewunsetdirectory is actually mangled the same as any other view
directory. So if it's configured to something like "N/A", there won't be
multiple levels of directories, which would also confuse git-annex.
Sponsored-By: Jack Hill on Patreon
It's hard to know what's a good default for this. But 1 mb seems way too
small, because it's very easy for a git pull or some similar operation
that we don't think of as using much space to use up 1 mb of space.
Most people would want to free up some space if a filesystem only had 100
mb free. But on a small VPS, it's probably not uncommon to have only 1 gb
free. So 1 gb is too large for annex.diskreserve.
While old 1 gb USB keys are around, it's unlikely that anyone is
relying on them to shuttle annex data around; it would be worth anyone's
time to upgrade to a 32 gb or larger cheap modern USB key ($5).
Sponsored-by: Kevin Mueller on Patreon
This allows annex.dbdir to be set globally or always set to the same
value when needed. Each repository uses a subdirectory of it.
Sponsored-by: Dartmouth College's Datalad project
WIP: This is mostly complete, but there is a problem: createDirectoryUnder
throws an error when annex.dbdir is set to outside the git repo.
annex.dbdir is a workaround for filesystems where sqlite does not work,
due to eg, the filesystem not properly supporting locking.
It's intended to be set before initializing the repository. Changing it
in an existing repository can be done, but would be the same as making a
new repository and moving all the annexed objects into it. While the
databases get recreated from the git-annex branch in that situation, any
information that is in the databases but not stored in the branch gets
lost. It may be that no information ever gets stored in the databases
that cannot be reconstructed from the branch, but I have not verified
that.
Sponsored-by: Dartmouth College's Datalad project
Added annex.alwayscompact setting which can be unset to speed up writes to
the git-annex branch in some cases.
Sponsored-by: Dartmouth College's DANDI project
Ignore annex.numcopies set to 0 in gitattributes or git config, or by
git-annex numcopies or by --numcopies, since that configuration would make
git-annex easily lose data. Same for mincopies.
This is a continuation of the work to make data only be able to be lost
when --force is used. It earlier led to the --trust option being disabled,
and similar reasoning applies here.
Most numcopies configs had docs that strongly discouraged setting it to 0
anyway. And I can't imagine a use case for setting to 0. Not that there
might not be one, but it's just so far from the intended use case of
git-annex, of managing and storing your data, that it does not seem like
it makes sense to cater to such a hypothetical use case, where any
git-annex drop can lose your data at any time.
Using a smart constructor makes sure every place avoids 0. Note that this
does mean that NumCopies is for the configured desired values, and not the
actual existing number of copies, which of course can be 0. The name
configuredNumCopies is used to make that clear.
Sponsored-by: Brock Spratlen on Patreon
annex.skipunknown now defaults to false, so commands like `git annex get foo*`
will not silently skip over files/dirs that are not checked into git.
Sponsored-by: Brock Spratlen on Patreon
New method is much better. Avoids unrestrained transfer at the beginning
(except for the first block. Keeps right at or a few kb/s below the
configured limit, with very little varation in the actual reported bandwidth.
Removed the /s part of the config as it's not needed.
Ready to merge.
Sponsored-by: Luke Shumaker on Patreon
RemoteGitConfig parsing looks for annex.bwlimit when a remote
does not have a per-remote config for it, so no need for a separate
gobal config.
Sponsored-by: Svenne Krap on Patreon
RemoteGitConfig parsing looks for annex.stalldetection when a remote
does not have a per-remote config for it, so no need for a separate
gobal config.
Sponsored-by: Noam Kremen on Patreon
Bug fix: Git configs such as annex.verify were incorrectly overriding
per-remote git configs such as remote.name.annex-verify.
This dates all the way back to 2013,
commit 8a5b397ac4,
where hlint apparently somehow confused me into parsing in the wrong
order. Before that it was correct.
Amazing noone has noticed until now.
Sponsored-by: Kevin Mueller on Patreon
Added annex.bwlimit and remote.name.annex-bwlimit config that works for git
remotes and many but not all special remotes.
This nearly works, at least for a git remote on the same disk. With it set
to 100kb/1s, the meter displays an actual bandwidth of 128 kb/s, with
occasional spikes to 160 kb/s. So it needs to delay just a bit longer...
I'm unsure why.
However, at the beginning a lot of data flows before it determines the
right bandwidth limit. A granularity of less than 1s would probably improve
that.
And, I don't know yet if it makes sense to have it be 100ks/1s rather than
100kb/s. Is there a situation where the user would want a larger
granularity? Does granulatity need to be configurable at all? I only used that
format for the config really in order to reuse an existing parser.
This can't support for external special remotes, or for ones that
themselves shell out to an external command. (Well, it could, but it
would involve pausing and resuming the child process tree, which seems
very hard to implement and very strange besides.) There could also be some
built-in special remotes that it still doesn't work for, due to them not
having a progress meter whose displays blocks the bandwidth using thread.
But I don't think there are actually any that run a separate thread for
downloads than the thread that displays the progress meter.
Sponsored-by: Graham Spencer on Patreon
This eliminates the distinction between decodeBS and decodeBS', encodeBS
and encodeBS', etc. The old implementation truncated at NUL, and the
primed versions had to do extra work to avoid that problem. The new
implementation does not truncate at NUL, and is also a lot faster.
(Benchmarked at 2x faster for decodeBS and 3x for encodeBS; more for the
primed versions.)
Note that filepath-bytestring 1.4.2.1.8 contains the same optimisation,
and upgrading to it will speed up to/fromRawFilePath.
AFAIK, nothing relied on the old behavior of truncating at NUL. Some
code used the faster versions in places where I was sure there would not
be a NUL. So this change is unlikely to break anything.
Also, moved s2w8 and w82s out of the module, as they do not involve
filesystem encoding really.
Sponsored-by: Shae Erisson on Patreon
Freeze first sets the file perms, and then runs
freezecontent-command. Thaw runs thawcontent-command before
restoring file permissions. This is in case the freeze command
prevents changing file perms, as eg setting a file immutable does.
Also, changing file perms tends to mess up previously set ACLs.
git-annex init's probe for crippled filesystem uses them, so if file perms
don't work, but freezecontent-command manages to prevent write to a file,
it won't treat the filesystem as crippled.
When the the filesystem has been probed as crippled, the hooks are not
used, because there seems to be no point then; git-annex won't be relying
on locking annex objects down. Also, this avoids them being run when the
file perms have not been changed, in case they somehow rely on
git-annex's setting of the file perms in order to work.
Sponsored-by: Dartmouth College's Datalad project
Which has otherwise been supported since 2019, but was missing from the
list of allowed repo-global configs.
Reordered the list to match the order in the git-annex-config man page, to
make them easy to cross-compare.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
The slightly unusual parsing in Types.GitConfig avoids the need to look
at the remote list to get configs of remotes. annexPrivateRepos combines
all the configs, and will only be calculated once, so it's nice and
fast.
privateUUIDsKnown and regardingPrivateUUID now need to read from the
annex mvar, so are not entirely free. But that overhead can be optimised
away, as seen in getJournalFileStale. The other call sites didn't seem
worth optimising to save a single MVar access. The feature should have
impreceptable speed overhead when not being used.
Most of the changes here involve global option parsing: GlobalSetter
changed so it can both run an Annex action to set state, but can also
change the AnnexRead value, which is immutable once the Annex monad is
running.
That allowed a debugselector value to be added to AnnexRead, seeded
from the git config. The --debugfilter option's GlobalSetter then updates
the AnnexRead.
This improved GlobalSetter can later be used to move more stuff to
AnnexRead. Things that don't involve a git config will be easier to
move, and probably a *lot* of things can be moved eventually.
fastDebug, while implemented, is not used anywhere yet. But it should be
fast..
Can beet to false to avoid some expensive things needed to support unlocked
files.
See my comment for why this only controls what init sets up, and not other
behavior.
I didn't bother with making the v5 upgrade code path look at this, though
it easily could, because the docs say to run git-annex init after setting
it to make it take effect.
annex.stalldetection can now be set to "true" to make git-annex do
automatic stall detection when it detects a remote is updating its transfer
progress consistently enough.
This commit was sponsored by Luke Shumaker on Patreon.
New config annex.stalldetection, remote.name.annex-stalldetection, which
can be used to deal with remotes that stall during transfers, or are
sometimes too slow to want to use.
This commit was sponsored by Luke Shumaker on Patreon.
Added annex.adjustedbranchrefresh git config to update adjusted branches
set up by git-annex adjust --unlock-present/--hide-missing.
Note, in a few cases, I was not able to make the adjusted branch
be updated in calls to moveAnnex, because information about what
file corresponds to a key is not available. They are:
* If two files point to one file, then eg, `git annex get foo` will
update the branch to unlock foo, but will not unlock bar, because it
does not know about it. Might be fixable by making `git annex get
bar` do something besides skipping bar?
* git-annex-shell recvkey likewise (so sends over ssh from old versions
of git-annex)
* git-annex setkey
* git-annex transferkey if the user does not use --file
* git-annex multicast sends keys with no associated file info
Doing a single full refresh at the end, after any incremental refresh,
will deal with those edge cases.
Works better with automatic merge conflict resolution than git's ususual
default of "conflict".
This is not done when automatic merge conflict resolution is disabled.
This commit was sponsored by Mark Reidenbach on Patreon.
One reason is, 5 is an arbitrary number so ought to be configurable.
The real reason though, is I wanted to make the man page explain when
forward retry can override annex.retry, and having a config made the
man page easier to write.
Added annex.skipunknown git config, that can be set to false to change the
behavior of commands like `git annex get foo*`, to not skip over files/dirs
that are not checked into git and are explicitly listed in the command
line.
Significant complexity was needed to handle git-annex add, which uses some
git ls-files calls, but needs to not use --error-unmatch because of course
the files are not known to git.
annex.skipunknown is planned to change to default to false in a
git-annex release in early 2022. There's a todo for that.
git-annex config: Only allow configs be set that are ones git-annex
actually supports reading from repo-global config, to avoid confused users
trying to set other configs with this.
* Added sync --only-annex, which syncs the git-annex branch and annexed
content but leaves managing the other git branches up to you.
* Added annex.synconlyannex git config setting, which can also be set with
git-annex config to configure sync in all clones of the repo.
Use case is then the user has their own git workflow, and wants to use
git-annex without disrupting that, so they sync --only-annex to get the
git-annex stuff in sync in addition to their usual git workflow.
When annex.synconlyannex is set, --not-only-annex can be used to override
it.
It's not entirely clear what --only-annex --commit or --only-annex
--push should do, and I left that combination not documented because I
don't know if I might want to change the current behavior, which is that
such options do not override the --only-annex. My gut feeling is that
there is no good reasons to use such combinations; if you want to use
your own git workflow, you'll be doing your own committing and pulling
and pushing.
A subtle question is, how should import/export special remotes be handled?
Importing updates their remote tracking branch and merges it into master.
If --only-annex prevented that git branch stuff, then it would prevent
exporting to the special remote, in the case where it has changes that
were not imported yet, because there would be a unresolved conflict.
I decided that it's best to treat the fact that there's a remote tracking
branch for import/export as an implementation detail in this case. The more
important thing is that an import/export special remote is entirely annexed
content, and so it makes a lot of sense that --only-annex will still sync
with it.
The git add behavior changes could be avoided if it turns out to be
really annoying, but then it would need to behave the old way when
annex.dotfiles=false and the new way when annex.dotfiles=true. I'd
rather not have the config option result in such divergent behavior as
`git annex add .` skipping a dotfile (old) vs adding to annex (new).
Note that the assistant always adds dotfiles to the annex.
This is surprising, but not new behavior. Might be worth making it also
honor annex.dotfiles, but I wonder if perhaps some user somewhere uses
it and keeps large files in a directory that happens to begin with a
dot. Since dotfiles and dotdirs are a unix culture thing, and the
assistant users may not be part of that culture, it seems best to keep
its current behavior for now.
* annex.addunlocked can be set to an expression with the same format used by
annex.largefiles, in case you want to default to unlocking some files but
not others.
* annex.addunlocked can be configured by git-annex config.
Added a git-annex-matching-expression man page, broken out from
tips/largefiles.
A tricky consequence of this is that git-annex add --relaxed
honors annex.addunlocked, but an expression might want to know the size
or content of an url, which it's not going to download. I decided it was
better not to fail, and just dummy up some plausible data in that case.
Performance impact should be negligible. The global config is already
loaded for annex.largefiles. The expression only has to be parsed once,
and in the simple true/false case, it should not do any additional work
matching it.
annex.largefiles can be configured by git-annex config, to more easily set
a default that will also be used by clones, without needing to shoehorn the
expression into the gitattributes file. The git config and gitattributes
override that.
Whenever something is added to git-annex config, we have to consider what
happens if a user puts a purposfully bad value in there. Or, if a new
git-annex adds some new value that an old git-annex can't parse.
In this case, a global annex.largefiles that can't be parsed currently
makes an error be thrown. That might not be ideal, but the gitattribute
behaves the same, and is almost equally repo-global.
Performance notes:
git-annex add and addurl construct a matcher once
and uses it for every file, so the added time penalty for reading the global
config log is minor. If the gitattributes annex.largefiles were deprecated,
git-annex add would get around 2% faster (excluding hashing), because
looking that up for each file is not fast. So this new way of setting
it is progress toward speeding up add.
git-annex smudge does need to load the log every time. As well as checking
the git attribute. Not ideal. Setting annex.gitaddtoannex=false avoids
both overheads.
The parser and looking up config keys in the map should both be faster
due to using ByteString.
I had hoped this would speed up startup time, but any improvement to
that was too small to measure. Seems worth keeping though.
Note that the parser breaks up the ByteString, but a config map ends up
pointing to the config as read, which is retained in memory until every
value from it is no longer used. This can change memory usage
patterns marginally, but won't affect git-annex.
Added annex.gitaddtoannex configuration. Setting it to false prevents
git add from usually adding files to the annex.
(Unless the file was annexed before, or a renamed annexed file is detected.)
Currently left at true; some users are encouraging it be set to false.
