The webapp modules cannot build with the assistant disabled, so make the
webapp be under the assistant build flag.
Sponsored-by: Jarkko Kniivilä on Patreon
--backend is no longer a global option, and is only accepted by commands
that actually need it.
Three commands that used to support backend but don't any longer are
watch, webapp, and assistant. It would be possible to make them support it,
but I doubt anyone used the option with these. And in the case of webapp
and assistant, the option was handled inconsistently, only taking affect
when the command is run with an existing git-annex repo, not when it
creates a new one.
Also, renamed GlobalOption etc to AnnexOption. Because there are many
options of this type that are not actually global (any more) and get
added to commands that need them.
Sponsored-by: Kevin Mueller on Patreon
Improve handling of parallelization with -J when copying content from/to a
git remote that is a local path.
Sponsored-by: Nicholas Golder-Manning on Patreon
When adding a small file, it does not get locked down, so can be modified
after git-annex checks that it's small. The use of queued git add made the
race window nice and wide too.
Fixed by checking if the file has changed, and by not using git add.
Instead, have to recapitulate git add's handling of things like symlinks
and executable files.
Sponsored-by: Jochen Bartl on Patreon
The remaining callers all did not rely on it checking gitignore, so were
easy to convert.
They were susceptable to the same overwrite race as add and fix,
although less likely to have it and a narrower window than add's race.
Command.Rekey in passing got an unncessary call to removeFile deleted.
addSymlink handles deleting any existing worktree file.
This is not a complete fix for all such races, only the one where a
large file gets changed while adding and gets added to git rather than
to the annex.
addLink needs to go away, any caller of it is probably subject to the
same kind of race. (Also, addLink itself fails to check gitignore when
symlinks are not supported.)
ingestAdd no longer checks gitignore. (It didn't check it consistently
before either, since there were cases where it did not run git add!)
When git-annex import calls it, it's already checked gitignore itself
earlier. When git-annex add calls it, it's usually on files found
by withFilesNotInGit, which handles checking ignores.
There was one other case, when git-annex add --batch calls it. In that
case, old git-annex behaved rather badly, it would seem to add the file,
but git add would later fail, leaving the file as an unstaged annex symlink.
That behavior has also been fixed.
Sponsored-by: Brett Eisenberg on Patreon
move: Improve resuming a move that succeeded in transferring the content,
but where dropping failed due to eg a network problem, in cases where
numcopies checks prevented the resumed move from dropping the object from
the source repository.
This was earlier done for moves that got interrupted during the drop stage.
Sponsored-by: Svenne Krap on Patreon
Fix retrival of an empty file that is stored in a special remote with
chunking enabled.
The speculative chunk stuff caused a reversion by adding an empty list for
the empty file. Which is just wrong; the empty file is still stored on the
remote, and should be retrieved like any other file. It uses 1 chunk, so
`max 1` is the simple fix.
Sponsored-by: Noam Kremen on Patreon
rather than matching path of an existing remote to find the uuid.
The main benefit of this is that locations not using ssh:// will work
now, including both paths and host:/path
The other benefit is that it's a simpler interface, no need to have an
existing remote with the same url and some other name. Although that
will still work of course.
This does rely on tryGitConfigRead working when given a Git.Repo that is
not a remote. Luckily, it works fine that way.
Also, tryGitConfigRead will auto-init a local repo that has a git-annex
branch. I did not enable auto-init of ssh repos though.
The uuid discovery actually happens twice; initremote discovers it,
and uses it to store the special remote config, but does not set it in the
git remote it creates. So the next run of git-annex does uuid discovery
again, and caches it that time. This could be improved for a tiny
speedup, but I didn't want to complicate things for that in this
commit.
Sponsored-by: Dartmouth College's DANDI project
to track down a blocked indefinitely on MVar that seems to occur after
sqlite throws ErrorBusy but that I have not been able to reproduce when
I made commits synthetically throw ErrorBusy.
Sponsored-by: Dartmouth College's Datalad project
test: When limiting tests to run with -p, work around tasty limitation by
automatically including dependent tests.
This fixes a reversion because it didn't used to use dependencies and
forced tasty to run the init tests first. That changed when parallelizing
the test suite.
It will sometimes do a little more work than strictly required,
because it adds init tests deps when limited to eg quickcheck tests,
which don't depend on them. But this only adds a few seconds work.
Sponsored-by: Dartmouth College's Datalad project
This reverts windows-specific parts of 5a98f2d509
There were no code paths in common between windows and unix, so this
will return Windows to the old behavior.
The problem that the commit talks about has to do with multiple different
locations where git-annex can store annex object files, but that is not
too relevant to Windows anyway, because on windows the filesystem is always
treated as criplled and/or symlinks are not supported, so it will only
use one object location. It would need to be using a repo populated
in another OS to have the other object location in use probably.
Then a drop and get could possibly lead to a dangling lock file.
And, I was not able to actually reproduce that situation happening
before making that commit, even when I forced a race. So making these
changes on windows was just begging trouble..
I suspect that the change that caused the reversion is in
Annex/Content/Presence.hs. It checks if the content file exists,
and then called modifyContentDirWhenExists, which seems like it would
not fail, but if something deleted the content file at that point,
that call would fail. Which would result in an exception being thrown,
which should not normally happen from a call to inAnnexSafe. That was a
windows-specific change; the unix side did not have an equivilant
change.
Sponsored-by: Dartmouth College's Datalad project
Avoid treating refs/annex/last-index or other refs that are not commit
objects as evidence of repository corruption.
The repair code checks to find bad refs by trying to run `git log` on
them, and assumes that no output means something is broken. But git log
on a tree object is empty.
This was worth fixing generally, not as a special case, since it's certainly
possible that other things store tree or other objects in refs.
Sponsored-by: Max Thoursie on Patreon
This avoids displaying the unexpected exit codes message when
the list is eg [ExitSuccess, ExitFailure 1].
Sponsored-by: Dartmouth College's Datalad project
If the temp directory can somehow contain a hard link, it changes the
mode, which affects all other hard linked files. So, it's too unsafe
to use everywhere in git-annex, since hard links are possible in
multiple ways and it would be very hard to prove that every place that
uses a temp directory cannot possibly put a hard link in it.
Added a call to removeDirectoryForCleanup to test_crypto, which will
fix the problem that commit 17b20a2450
was intending to fix, with a much smaller hammer.
Sponsored-by: Dartmouth College's Datalad project
Using removePathForcibly avoids concurrent removal problems.
The i386ancient build still uses an old version of ghc and directory that
do not include removePathForcibly though.
Sponsored-by: Dartmouth College's Datalad project
prop_relPathDirToFileAbs_basics (TestableFilePath ":/") failed on
windows. The colon was filtered out after trying to make
the path relative, which only removed leading path separators.
So, ":/" changed to "/" which is not relative. Filtering out the colon
before hand avoids this problem.
Sponsored-by: Luke Shumaker on Patreon
add: Avoid unncessarily converting a newly unlocked file to be stored
in git when it is not modified, even when annex.largefiles does not
match it.
This fixes a reversion in version 10.20220222, where git-annex unlock
followed by git-annex add, followed by git commit file could result in
git thinking the file was modified after the commit.
I do have half a mind to remove the withUnmodifiedUnlockedPointers part
of git-annex add. It seems weird, despite that old bug report arguing
a case of consistency that it ought to behave that way. When git-annex
add surpises me, it seems likely it's wrong.. But for now, this is the
smallest possible fix.
Sponsored-by: Dartmouth College's Datalad project
Directory special remotes with importtree=yes have changed to once more
take inodes into account. This will cause extra work when importing from a
directory on a FAT filesystem that changes inodes on every mount.
To avoid that extra work, set ignoreinodes=yes when initializing a new
directory special remote, or change the configuration of your existing
remote: git-annex enableremote foo ignoreinodes=yes
This will mean a one-time re-import of all contents from every directory
special remote due to the changed setting.
73df633a62 thought
it was too unlikely that there would be modifications that the inode number
was needed to notice. That was probably right; it's very unlikely that a
file will get modified and end up with the same size and mtime as before.
But, what was not considered is that a program like NextCloud might write
two files with different content so closely together that they share the
mtime. The inode is necessary to detect that situation.
Sponsored-by: Max Thoursie on Patreon
Propagate nonzero exit status from git ls-files when a specified file does
not exist, or a specified directory does not contain any files checked into
git.
The recent completion of the annex.skipunknown transition exposed this
bug, that has unfortunately been lurking all along.
It is also possible that git ls-files errors out for some other reason
-- perhaps a permission problem -- and this will also fix error propagation
in such situations.
Sponsored-by: Dartmouth College's Datalad project
It did nothing, since at this point the link is dangling. But when there
is a thaw hook, it would probably not be happy to be asked to run on a
symlink, or might do something unexpected.
Sponsored-by: Dartmouth College's Datalad project
When annex.freezecontent-command is set, and the filesystem does not
support removing write bits, avoid treating it as a crippled filesystem.
The hook may be enough to prevent writing on its own, and some filesystems
ignore attempts to remove write bits.
Sponsored-by: Dartmouth College's Datalad project
It will then proceed to add the file the same as if it were any other
file containing possibly annexable content. Usually the file is one that
was annexed before, so the new, probably corrupt content will also be added
to the annex. If the file was not annexed before, the content will be added
to git.
It's not possible for the smudge filter to throw an error here, because
git then just adds the file to git anyway.
Sponsored-by: Dartmouth College's Datalad project
This format is designed to detect accidental appends, while having some
room for future expansion.
Detect when an unlocked file whose content is not present has gotten some
other content appended to it, and avoid treating it as a pointer file, so
that appended content will not be checked into git, but will be annexed
like any other file.
Dropped the max size of a pointer file down to 32kb, it was around 80 kb,
but without any good reason and certianly there are no valid pointer files
anywhere that are larger than 8kb, because it's just been specified what it
means for a pointer file with additional data even looks like.
I assume 32kb will be good enough for anyone. ;-) Really though, it needs
to be some smallish number, because that much of a file in git gets read
into memory when eg, catting pointer files. And since we have no use cases
for the extra lines of a pointer file yet, except possibly to add
some human-visible explanation that it is a git-annex pointer file, 32k
seems as reasonable an arbitrary number as anything. Increasing it would be
possible, eg to 64k, as long as users of such jumbo pointer files didn't
mind upgrading all their git-annex installations to one that supports the
new larger size.
Sponsored-by: Dartmouth College's Datalad project
takeByteString can only be used at the end of a parser, not before other
input. This was a dumb enough mistake that I audited the rest of the
code base for similar mistakes. Pity that attoparsec cannot avoid it at
the type level.
Fixes git-annex forget propagation between repositories. (reversion
introduced in version 7.20190122)
Sponsored-by: Brock Spratlen on Patreon
Seems that --no-ext-diff and -c diff.external= are not enough to disable
external diff command when gitattributes textconv specifies it.
I'm pretty sure that --no-ext-diff and -c diff.external= are not both
needed, but not 100%. Something about -G may need the latter to fully
disable diffs in some cases. So kept that part as it was.
Sponsored-by: Dartmouth College's Datalad project
The "+" argument only runs the command once, so is not safe to use. Using
";" instead would have been the simplest fix, but also the slowest.
Since my phone has an xargs that supports -0, I piped find to xargs
instead. Unsure how portable this will be, perhaps some android's don't
have xargs -0 or find -printf to send null terminated output.
The business with pipefail is necessary to make a failure of find cause the
import to fail. Probably this works on all androids, but if not, it will
probably just result in a failure of find being ignored. It would be
possible to make ignorefinderror just disable setting pipefail, but then
if some android has a shell that has pipefail enabled by default, ignorefinderror
would not work, so I kept the || true approach for that.
Sponsored-by: Max Thoursie on Patreon
Reject combinations of --batch (or --batch-keys) with options like --all or
--key or with filenames.
Most commands ignored the non-batch items when batch mode was enabled.
For some reason, addurl and dropkey both processed first the specified
non-batch items, followed by entering batch mode. Changed them to also
error out, for consistency.
Sponsored-by: Dartmouth College's Datalad project
autoUpgradeableVersions had latestVersion (10), but it did not make
sense for asking for old version 6 to get version 10, while asking for
version 8 got version 8. So use defaultVersion (8) instead.
Sponsored-by: Dartmouth College's Datalad project
