So that eg, addurl of several large files that take time to download will
update the index for each file, rather than deferring the index updates to
the end.
In cases like an add of many smallish files, where a new file is being
added every few seconds. In that case, the queue will still build up a
lot of changes which are flushed at once, for best performance. Since
the default queue size is 10240, often it only gets flushed once at the
end, same as before. (Notice that updateQueue updated _lastchanged
when adding a new item to the queue without flushing it; that is
necessary to avoid it flushing the queue every 5 minutes in this case.)
But, when it takes more than a 5 minutes to add a file, the overhead of
updating the index immediately is probably small, so do it after each
file. This avoids git-annex potentially taking a very very long time
indeed to stage newly added files, which can be annoying to the user who
would like to get on with doing something with the files it's already
added, eg using git mv to rename them to a better name.
This is only likely to cause a problem if it takes say, 30 seconds to
update the index; doing an extra 30 seconds of work after every 5
minute file add would be less optimal. Normally, updating the index takes
significantly less time than that. On a SSD with 100k files it takes
less than 1 second, and the index write time is bound by disk read and
write so is not too much worse on a hard drive. So I hope this will not
impact users, although if it does turn out to, the time limit could be
made configurable.
A perhaps better way to do it would be to have a background worker
thread that wakes up every 60 seconds or so and flushes the queue.
That is made somewhat difficult because the queue can contain Annex
actions and so this would add a new source of concurrency issues.
So I'm trying to avoid that approach if possible.
Sponsored-by: Erik Bjäreholt on Patreon
This version of git -- or its new default "ort" resolver -- handles such
a conflict by staging two files, one with the original name and the other
named file~ref. Use unmergedSiblingFile when the latter is detected.
(It doesn't do that when the conflict is between a directory and a file
or symlink though, so see previous commit for how that case is handled.)
The sibling file has to be deleted separately, because cleanConflictCruft
may not delete it -- that only handles files that are annex links,
but the sibling file may be the non-annexed file side of the conflict.
The graftin code had assumed that, when the other side of a conclict
is a symlink, the file in the work tree will contain the non-annexed
content that we want it to contain. But that is not the case with the new
git; the file may be the annex link and needs to be replaced with the
content, while the annex link will be written as a -variant file.
(The weird doesDirectoryExist check in graftin turns out to still be
needed, test suite failed when I tried to remove it.)
Test suite passes with new git with ort resolver default. Have not tried it
with old git or other defaults.
Sponsored-by: Noam Kremen on Patreon
Based on my earlier benchmark, I have a rough cost model for how
expensive it is for git-annex smudge to be run on a file, vs
how expensive it is for a gigabyte of a file's content to be read and
piped through to filter-process.
So, using that cost model, it can decide if using filter-process will
be more or less expensive than running the smudge filter on the files to
be restaged.
It turned out to be *really* annoying to temporarily disable
filter-process. I did find a way, but urk, this is horrible. Notice
that, if it's interrupted with it disabled, it will remain disabled
until the next time restagePointerFile runs. Which could be some time
later. If the user runs `git add` or `git checkout` on a lot of small
files before that, they will see slower than expected performance.
(This commit also deletes where I wrote down the benchmark results
earlier.)
Sponsored-by: Noam Kremen on Patreon
filter-process: New command that can make git add/checkout faster when
there are a lot of unlocked annexed files or non-annexed files, but that
also makes git add of large annexed files slower.
Use it by running: git
config filter.annex.process 'git-annex filter-process'
Fully tested and working, but I have not benchmarked it at all.
And, incremental hashing is not done when git add uses it, so extra work is
done in that case.
Sponsored-by: Mark Reidenbach on Patreon
This module is not used yet, but the plan is to use it for smudge/clean
filtering, at least as an option. In some circumstances, using this
interface may perform better than the interface git-annex is currently
using.
Sponsored-by: Brock Spratlen on Patreon
git does not crash when there's a remote configured for a user who does
not exist, and this prevents git-annex from crashing too. Consider that
a user might exist on one system but not another, and the git repo be
moved between systems. So not crashing is desirable.
Note that git fetch seems to mishandle a remote path like ~foo/bar
when the user does not exist. While it does access ./~foo/bar,
and gets as far as running git-upload-pack on the path,
it then complains there is no such repo. So different parts of git seem
to be doing different things in that edge case. Anyway, git-annex does
not need to be bug-for-bug compatible with git.
Sponsored-by: Jack Hill on Patreon
This improves the borg special remote memory usage, by
letting it only load one archive's worth of filenames into memory at a
time, and building up a larger tree out of the chunks.
When a borg repository has many archives, git-annex could easily OOM
before. Now, it will use only memory proportional to the number of
annexed keys in an archive.
Minor implementation wart: Each new chunk re-opens the content
identifier database, and also a new vector clock is used for each chunk.
This is a minor innefficiency only; the use of continuations makes
it hard to avoid, although putting the database handle into a Reader
monad would be one way to fix it.
It may later be possible to extend the ImportableContentsChunkable
interface to remotes that are not third-party populated. However, that
would perhaps need an interface that does not use continuations.
The ImportableContentsChunkable interface currently does not allow
populating the top of the tree with anything other than subtrees. It
would be easy to extend it to allow putting files in that tree, but borg
doesn't need that so I left it out for now.
Sponsored-by: Noam Kremen on Patreon
Commit 4bf7940d6b introduced this
problem, but was otherwise doing a good thing. Problem being
that fileRef "/foo" used to return ":./foo", which was actually wrong,
but as long as there was no foo in the local repository, catKey
could operate on it without crashing. After that fix though, fileRef
would return eg "../../foo", resulting in fileRef returning
":./../../foo", which will make git cat-file crash since that's
not a valid path in the repo.
Fix is simply to make fileRef detect paths outside the repo and return
Nothing. Then catKey can be skipped. This needed several bugfixes to
dirContains as well, in previous commits.
In Command.Smudge, this led to needing to check for Nothing. That case
should actually never happen, because the fileoutsiderepo check will
detect it earlier.
Sponsored-by: Brock Spratlen on Patreon
This avoids starting one process when only the other one is needed.
Eg in git-annex smudge --clean, this reduces the total number of
cat-file processes that are started from 4 to 2.
The only performance penalty is that when both are needed, it has to do
twice as much work to maintain the two Maps. But both are very small,
consisting of 1 or 2 items, so that work is negligible.
Sponsored-by: Dartmouth College's Datalad project
This eliminates the distinction between decodeBS and decodeBS', encodeBS
and encodeBS', etc. The old implementation truncated at NUL, and the
primed versions had to do extra work to avoid that problem. The new
implementation does not truncate at NUL, and is also a lot faster.
(Benchmarked at 2x faster for decodeBS and 3x for encodeBS; more for the
primed versions.)
Note that filepath-bytestring 1.4.2.1.8 contains the same optimisation,
and upgrading to it will speed up to/fromRawFilePath.
AFAIK, nothing relied on the old behavior of truncating at NUL. Some
code used the faster versions in places where I was sure there would not
be a NUL. So this change is unlikely to break anything.
Also, moved s2w8 and w82s out of the module, as they do not involve
filesystem encoding really.
Sponsored-by: Shae Erisson on Patreon
* sync: When --quiet is used, run git commit, push, and pull without
their ususual output.
* merge: When --quiet is used, run git merge without its usual output.
This might also make --quiet work better for some other commands
that make commits, like git-annex adjust.
Sponsored-by: Kevin Mueller on Patreon
Does not check the reflog, but otherwise works.
It's possible for it to display something that is not an annexed file,
if a non-annexed file somehow ends up containing something that looks
like the key's name. This seems very unlikely to happen, and it would
add a lot of complexity to detect it and somehow skip over that file,
since the git log would need to either be run again, or not limited to 1
result and canceled once enough results have been read.
Also, it kind of seems ok, if a file refers to a key, to consider that
as a place the key was used, for some definition of used. So, I punted
on dealing with that. May revisit later.
Sponsored-by: Brock Spratlen on Patreon
If .git/config symlinks are ever a thing, this will handle them better.
But mostly, this is to avoid git-repair needing to include CopyFile,
which would complicate it unduely.
In commit dfc4e641b5 git repair was changed
to use remote name, not url, when fetching. But it fetches into a temporary
git repo, which doesn't have remotes configured. Oops.
(In my defense, that commit was made just as covid lockdown started. But
testing? Urk.)
Sponsored-by: Mark Reidenbach on Patreon
Fixed bug that interrupting git-annex repair (or assistant) while it was
fixing repository corruption would lose objects that were contained in pack
files.
Unpack all pack files and move objects into place *before* deleting the
pack files. The old approach moved the pack files to a temp directory
before unpacking them, which was not interruption safe.
Sponsored-By: Jochen Bartl on Patreon
Eg, when git commit runs the smudge filter.
Commit 428c91606b introduced the crash,
as write-tree fails in those situations. Now it will work, and git-annex
always gets up-to-date information even in those situations. It does
need to do a bit more work, each time git-annex is run with the index
locked. Although if the index is unmodified from the last time
write-tree succeeded, that work is avoided.
Added a note to man page about what happens to information that is
recorded in the private journal. Since it uses Branch.get, that
information will be copied when options allow. It seemed better to allow
it and document it than not allow it, since the options allow excluding
repositories and so can be used to exclude private repos if desired.
Fix behavior of several commands, including reinject, addurl, and rmurl
when given an absolute path to an unlocked file, or a relative path that
leaves and re-enters the repository.
To avoid slowing down all the cases where the paths are already ok
with an unncessary call to getCurrentDirectory, put in an optimisation
in relPathCwdToFile. That will probably also speed up other parts of
git-annex by some small amount, but I have not benchmarked.
Note that I did not convert branchFileRef, because it seems likely that
it will be used with a file that is not provided by the user, so is already
in a sane format. This is certainly true for the way git-annex uses it,
though maybe arguable to the extent Git.Ref is a reusable library.
The slightly unusual parsing in Types.GitConfig avoids the need to look
at the remote list to get configs of remotes. annexPrivateRepos combines
all the configs, and will only be calculated once, so it's nice and
fast.
privateUUIDsKnown and regardingPrivateUUID now need to read from the
annex mvar, so are not entirely free. But that overhead can be optimised
away, as seen in getJournalFileStale. The other call sites didn't seem
worth optimising to save a single MVar access. The feature should have
impreceptable speed overhead when not being used.
If it's passed a ConfigKey such as annex.version, avoid returning
an empty remote name and return Nothing instead. Also, foo.bar.baz is
not treated as a remote named "bar".
Which generated unusual git trees that could confuse git merge,
since they incorrectly had 2 subtrees with the same name.
Root of the bug was a) not testing that at all! but also
b) confusing graftdirs, which contains eg "foo/bar" with
non-recursively read trees, which would contain eg "bar"
when reading a subtree of "foo".
It's worth noting that Annex.Import uses graftTree, but it really
shouldn't have needed to. Eg, when importing into foo/bar from a remote,
it's enough to generate a tree of foo/bar/x, foo/bar/y, and does not
include other files that are at the top of the master branch. It uses
graftTree, so it does include the other files, as well as the foo/bar
tree. git merge will do the same thing for both trees. With that said,
switching it away from graftTree would result in another import
generating a new commit that seems to delete files that were there in a
previous commit, so it probably has to keep using graftTree since it
used it before.
This commit was sponsored by Kevin Mueller on Patreon.
Seems that hasOrigin was never finding origin's git-annex branch, so a new
one got created each time. And so then it later needed to merge the two
branches, which is expensive.
Added --no-track to git branch to avoid it displaying a message about
setting up tracking branches. Of course there's no reason to make the
git-annex branch a tracking branch since git-annex auto-merges it.
Not yet used, but allows getting the size of items in the tree fairly
cheaply.
I noticed that CmdLine.Seek uses ls-tree and the feeds the files into
another long-running process to check their size. That would be an
example of a place that might be sped up by using this. Although in that
particular case, it only needs to know the size of unlocked files, not
locked. And since enabling --long probably doubles the ls-tree runtime
or more, the overhead of using it there may outwweigh the benefit.
I don't think this actually fixes any buggy behavior in git-annex, I
just noticed that using treeItemToLsTreeItem and then serializing it
resulted in something starting with "160000 blob" rather than
"160000 commit"
Git.Remote.parseRemoteLocation had a hack to handle URIs that contained
characters like spaces, which is something git unfortunately allows
despite not being a valid URI. However, that hack looked for "//" to
guess something was an URI, and these gcrypt URIs, being to a local
path, don't contain that. So instead escape all illegal characters and
check if the resulting thing is an URI.
And that was already done by Git.Construct.fromUrl, so
internally the gcrypt URI with a space looks like "gcrypt::foo%20bar"
and that needs to be de-escaped when converting back from URI to local
repo path.
This change might also allow a few other almost-valid URIs to be handled
as URIs by git-annex. None that contain "//" will change, and any
behavior change should result in git-annex doing closer to a right thing
than it did before, probably.
This commit was sponsored by Noam Kremen on Patreon.
When a git remote is configured with an absolute path, use that path,
rather than making it relative. If it's configured with a relative path,
use that.
Git.Construct.fromPath changed to preserve the path as-is,
rather than making it absolute. And Annex.new changed to not
convert the path to relative. Instead, Git.CurrentRepo.get
generates a relative path.
A few things that used fromAbsPath unncessarily were changed in passing to
use fromPath instead. I'm seeing fromAbsPath as a security check,
while before it was being used in some cases when the path was
known absolute already. It may be that fromAbsPath is not really needed,
but only git-annex-shell uses it now, and I'm not 100% sure that there's
not some input that would cause a relative path to be used, opening a
security hole, without the security check. So left it as-is.
Test suite passes and strace shows the configured remote url is used
unchanged in the path into it. I can't be 100% sure there's not some code
somewhere that takes an absolute path to the repo and converts it to
relative and uses it, but it seems pretty unlikely that the code paths used
for a git remote would call such code. One place I know of is gitAnnexLink,
but I'm pretty sure that git remotes never deal with annex symlinks. If
that did get called, it generates a path relative to cwd, which would have
been wrong before this change as well, when operating on a remote.
Fixed that, and made parserLsTree accept the space as well as tab.
Fixes a reversion that made import of a tree from a special remote result in
a merge that deleted files that were not preferred content of that special
remote.
After the last commit, it was able to throw errors just due to an
unparseable url. This avoids needing to worry about that, as long
as the call site has already checked that it has a parseable url.
Including the non-standard URI form that git-remote-gcrypt uses for rsync.
Eg, "ook://foo:bar" cannot be parsed because "bar" is not a valid port
number. But git could have a remote with that, it would try to run
git-remote-ook to handle it. So, git-annex has to allow for such things,
rather than crashing.
This commit was sponsored by Luke Shumaker on Patreon.
In addition to regular file deletions, the removefiles argument passed
to adjustTree may contain removed submodules. When making the new
tree, filter these out in the same way that is done for regular files
so that the deletion is propagated.
This is conceptually very simple, just making a 1 that was hard coded be
exposed as a config option. The hard part was plumbing all that, and
dealing with complexities like reading it from git attributes at the
same time that numcopies is read.
Behavior change: When numcopies is set to 0, git-annex used to drop
content without requiring any copies. Now to get that (highly unsafe)
behavior, mincopies also needs to be set to 0. It seemed better to
remove that edge case, than complicate mincopies by ignoring it when
numcopies is 0.
This commit was sponsored by Denis Dzyubenko on Patreon.
