This needs the content to be present in order to hash it. But it's not
possible for a module used by Backend.URL to call inAnnex because that
would entail a dependency loop. So instead, rely on the fact that
Command.Migrate calls inAnnex before performing a migration.
But, Command.ExamineKey calls fastMigrate and the key may or may not
exist, and it's not wanting to actually perform a migration in any case.
To handle that, had to add an additional value to fastMigrate to
indicate whether the content is inAnnex.
Factored generateEquivilantKey out of Remote.Web.
Note that migrateFromURLToVURL hardcodes use of the SHA256E backend.
It would have been difficult not to, given all the dependency loop
issues. But --backend and annex.backend are used to tell git-annex
migrate to use VURL in any case, so there's no config knob that
the user could expect to configure that.
Sponsored-by: Brock Spratlen on Patreon
Not yet implemented is recording hashes on download from web and
verifying hashes.
addurl --verifiable option added with -V short option because I
expect a lot of people will want to use this.
It seems likely that --verifiable will become the default eventually,
and possibly rather soon. While old git-annex versions don't support
VURL, that doesn't prevent using them with keys that use VURL. Of
course, they won't verify the content on transfer, and fsck will warn
that it doesn't know about VURL. So there's not much problem with
starting to use VURL even when interoperating with old versions.
Sponsored-by: Joshua Antonishen on Patreon
--raw-except=web allows using yt-dlp but not any other special remotes.
Currently this option can only be used once, trying to use it repeatedly
will make option parsing fail. Perhaps it ought to support being used more
than once, but it seemed like an unlikely use case to need that.
Note that getParsed is called repeatedly when the option is used with
several urls. While implementing DeferredParseClass would avoid that
innefficiency, it didn't seem worth the added boilerplate since
getParsed only calls byNameWithUUID which does minimal work.
Sponsored-by: Dartmouth College's DANDI project
I noticed git-annex was using a lot of CPU when downloading from youtube,
and was not displaying progress. Turns out that yt-dlp (and I think also
youtube-dl) sometimes only knows an estimated size, not the actual size,
and displays the progress output slightly differently for that. That broke
the parser. And, the parser was feeding chunks that failed to parse back
as a remainder, which caused it to try to re-parse the entire output each
time, so it got slower and slower.
Using --progress-template like this should avoid parsing problems as well
as future proof against output changes. But it will work with only yt-dlp.
So, this seemed like the right time to deprecate youtube-dl, and default
to yt-dlp when available.
git-annex will still use youtube-dl if that's all that's available.
However, since the progress parser for youtube-dl was buggy, and I don't
want to maintain two different progress parsers (especially since
youtube-dl is no longer in debian unstable having been replaced by
yt-dlp), made git-annex no longer try to parse youtube-dl's progress.
Also, updated docs for yt-dlp being default. It did not seem worth
renaming annex.youtube-dl-options and annex.youtube-dl-command.
Note that yt-dlp does not seem to document the fields available in the
progress template. I found them by reading the source and looking at
the templates it uses internally. Also note that the use of "i" (rather
than "s") in progressTemplate makes it display floats rounded to integers;
particularly the estimated total size can be a float. That also does not
seem to be documented but I assume is a python thing?
Sponsored-by: Joshua Antonishen on Patreon
This reverts commit a325524454.
Turns out this was predicated on an incorrect belief that json output
didn't already sometimes lack the "key" field. Since json output already
can when `giveup` was used, it seems unncessary to add a whole new
option for this.
Added a --json-exceptions option, which makes some exceptions be output in json.
The distinction is that --json-error-messages is for messages relating
to a particular ActionItem, while --json-exceptions is for messages that
are not, eg ones for a file that does not exist.
It's unfortunate that we need two switches with such a fine distinction
between them, but I'm worried about maintaining backwards compatability
in the json output, to avoid breaking anything that parses it, and this was
the way to make sure I didn't.
toplevelWarning is generally used for the latter kind of message. And
the other calls to toplevelWarning could be converted to showException. The
only possible gotcha is that if toplevelWarning is ever called after
starting acting on a file, it will add to the --json-error-messages of the
json displayed for that file and converting to showException would be a
behavior change. That seems unlikely, but I didn't convery everything to
avoid needing to satisfy myself it was not a concern.
Sponsored-by: Dartmouth College's Datalad project
As well as escape sequences, control characters seem unlikely to be desired when
doing addurl, and likely to trip someone up. So disallow them as well.
I did consider going the other way and allowing filenames with control characters
and escape sequences, since git-annex is in the process of escaping display
of all filenames. Might still be a better idea?
Also display the illegal filename git quoted when it rejects it.
Sponsored-by: Nicholas Golder-Manning on Patreon
Forces eg, download with youtube-dl without falling back to raw download.
Since youtube-dl failing due to an url not being supported is difficult to
distinguish from it failing due to being blocked in some way, this can be
useful to avoid the fallback of git-annex downloading the raw web page and
adding that.
Since --raw also prevents using special remotes, --no-raw also
allows special remote downloads. Although it's always possible that some
special remote may claim an url and fall back to raw download of the
content, which --no-raw cannot prevent.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
Sometimes users would get confused because an option they were looking
for was not mentioned on a subcommand's man page, and they had not
noticed that the main git-annex man page had a list of common options.
This change lets each subcommand mention the common options, similarly
to how the matching options are handled.
This commit was sponsored by Svenne Krap on Patreon.
add, addurl, importfeed, import: Added --no-check-gitignore option
for finer grained control than using --force.
(--force is used for too many different things, and at least one
of these also uses it for something else. I would like to reduce
--force's footprint until it only forces drops or a few other data
losses. For now, --force still disables checking ignores too.)
addunused: Don't check .gitignores when adding files. This is a behavior
change, but I justify it by analogy with git add of a gitignored file
adding it, asking to add all unused files back should add them all back,
not skip some. The old behavior was surprising.
In Command.Lock and Command.ReKey, CheckGitIgnore False does not change
behavior, it only makes explicit what is done. Since these commands are run
on annexed files, the file is already checked into git, so git add won't
check ignores.
* addurl --preserve-filename: New option, uses server-provided filename
without any sanitization, but with some security checking.
Not yet implemented for remotes other than the web.
* addurl, importfeed: Avoid adding filenames with leading '.', instead
it will be replaced with '_'.
This might be considered a security fix, but a CVE seems unwattanted.
It was possible for addurl to create a dotfile, which could change
behavior of some program. It was also possible for a web server to say
the file name was ".git" or "foo/.git". That would not overrwrite the
.git directory, but would cause addurl to fail; of course git won't
add "foo/.git".
sanitizeFilePath is too opinionated to remain in Utility, so moved it.
The changes to mkSafeFilePath are because it used sanitizeFilePath.
In particular:
isDrive will never succeed, because "c:" gets munged to "c_"
".." gets sanitized now
".git" gets sanitized now
It will never be null, because sanitizeFilePath keeps the length
the same, and splitDirectories never returns a null path.
Also, on the off chance a web server suggests a filename of "",
ignore that, rather than trying to save to such a filename, which would
fail in some way.
Renamed annex.security.allowed-http-addresses to
annex.security.allowed-ip-addresses because it is not really specific to
the http protocol, also limiting eg, git-annex's use of ftp and via
youtube-dl, several other protocols.
The old name for the config will still work.
If both old and new name are set, the new name will win.
Added the ability to run one job per CPU (core), by setting annex.jobs=cpus,
or using option --jobs=cpus or -Jcpus.
Built with future expansion in mind, including not defaulting matching on
Concurrency so more constructors can later be added, and using "cpu"
instead of "0".
Added -z option to git-annex commands that use --batch, useful for
supporting filenames containing newlines.
It only controls input to --batch, the output will still be line delimited
unless --json or etc is used to get some other output. While git often
makes -z affect both input and output, I don't like trying them together,
and making it affect output would have been a significant complication,
and also git-annex output is generally not intended to be machine parsed,
unless using --json or a format option.
Commands that take pairs like "file key" still separate them with a space
in --batch mode. All such commands take care to support filenames with
spaces when parsing that, so there was no need to change it, and it would
have needed significant changes to the batch machinery to separate tose
with a null.
To make fromkey and registerurl support -z, I had to give them a --batch
option. The implicit batch mode they enter when not provided with input
parameters does not support -z as that would have complicated option
parsing. Seemed better to move these toward using the same --batch as
everything else, though the implicit batch mode can still be used.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Added --json-error-messages option, which includes error messages in the
json output, rather than outputting them to stderr.
The actual rediretion of errors is not implemented yet, this is only
the docs and option plumbing.
This commit was supported by the NSF-funded DataLad project.
Better to make it not be surprising and slow, than surprising and fast.
--raw can be used when it needs to be really fast.
Implemented adding a youtube-dl supported url to an existing file.
This commit was sponsored by andrea rota.
Including resuming and cleanup of incomplete downloads.
Still todo: --fast, --relaxed, importfeed, disk reserve checking,
quvi code cleanup.
This commit was sponsored by Anthony DeRobertis on Patreon.
i found that most man pages only had references to the main git-annex
manpage, which i stillfind pretty huge and hard to navigate through.
i tried to sift through all the man pages and add cross-references
between relevant pages. my general rule of thumb is that links should
be both ways unless one of the pages is a more general page that would
become ridiculously huge if all backlinks would be added
(git-annex-preferred-content comes to mind).
i have also make the links one per line as this is how it was done in
the metadata pages so far.
i did everything but the plumbing, utility and test commands, although
some of those are linked from the other commands so cross-links were
added there as well.
