init: Avoid scanning for annexed files, which can be lengthy in a
large repository. Instead that scan is done on demand. This lets git-annex
init be run and some query commands be used in a repository without
waiting.
Note that autoinit already behaved this way, so while this will mean some
commands like git-annex get/unlock/add will do the scan the first time run,
that is not really a significant behavior change.
And, it's really better to have a consistent behavior. The reason for
the inconsistency was a strange bug discussed in
b3c4579c79. Avoiding reconcileStaged in
init will keep avoiding whatever that was.
Sponsored-by: Dartmouth College's DANDI project
git-annex get when run as the first git-annex command in a new repo did not
populate unlocked files. (Reversion in version 8.20210621)
I am not entirely happy with this, because I don't understand how
428c91606b caused the problem in the first
place, and I don't fully understand how skipping calling scanAnnexedFiles
during autoinit avoids the problem.
Kept the explicit call to scanAnnexedFiles during git-annex init,
so that when reconcileStaged is expensive, it can be made to run then,
rather than at some later point when the information is needed.
Sponsored-by: Brock Spratlen on Patreon
When I put in Haskell98 this spring, I was under the mistaken
apprehension that ghc defaulted to that. But it actually its default
is a third mode, which is closer to Haskell2010 but with some differences.
The manual says "By default, GHC mainly aims to behave (mostly) like a
Haskell 2010 compiler"
Fixed two cases where the Haskell98 do indentation flexability let
wrongly indented code build. That is one of the places where
ghc does not behave like Haskell2010 by default.
The other place that I think I was concerned about, is GHC manual
section 19.1.1.3. Expressions and patterns. But that only seems to
affect code using bottoms, so would only affect pure functions throwing
an error, which I don't think git-annex does in many places as it's
pretty horrid style. And it would only affect rare cases like shown in
that section. If it did happen, it would mean that the error was not
thrown before specifying Haskell98, and then was. Haskell2010 behaves
the same as Haskell98.
This commit was sponsored by Denis Dzyubenko on Patreon.
No behavior changes (hopefully), just adding SeekInput and plumbing it
through to the JSON display code for later use.
Over the course of 2 grueling days.
withFilesNotInGit reimplemented in terms of seekHelper
should be the only possible behavior change. It seems to test as
behaving the same.
Note that seekHelper dummies up the SeekInput in the case where
segmentPaths' gives up on sorting the expanded paths because there are
too many input paths. When SeekInput later gets exposed as a json field,
that will result in it being a little bit wrong in the case where
100 or more paths are passed to a git-annex command. I think this is a
subtle enough problem to not matter. If it does turn out to be a
problem, fixing it would require splitting up the input
parameters into groups of < 100, which would make git ls-files run
perhaps more than is necessary. May want to revisit this, because that
fix seems fairly low-impact.
I run haddock with `cabal haddock --executables`. It fails with:
Types/Remote.hs:271:17: error: parse error on input ‘->’
Apparently haddock does not like to find haddock blocks outside of
declarations? In any case, this patch makes these type of errors go
away.
Afterwards, I see errors like these, that need to be investigated as
a next step:
haddock: internal error: internal: extractDecl
CallStack (from HasCallStack):
error, called at utils/haddock/haddock-api/src/Haddock/Interface/Create.hs:1116:12 in main:Haddock.Interface.Create
Upgrade other repos than the current one by running git-annex upgrade
inside them, which avoids problems with upgrade code making assumptions
that the cwd will be inside the repo being upgraded.
In particular, this fixes a problem where upgrading a v7 repo to v8 caused
an ugly git error message.
I actually could not find a way to make Upgrade.V7 work properly
without changing directory to the remote. Once I got git ls-files to work,
the git cat-file failed because :path can only be used in the current git
repo.
Can be set to false to prevent any automatic repository upgrades.
Also, removed direct mode specific upgrade code in Annex.Init, and made
needsUpgrade always include the name/path of the repo, so if
there's a problem it's clear what repo has the problem.
And, made needsUpgrade catch any exceptions that might occur during the
upgrade, so it can display a more useful error message than just the
exception.
The goal is to be able to run CommandStart in the main thread when -J is
used, rather than unncessarily passing it off to a worker thread, which
incurs overhead that is signficant when the CommandStart is going to
quickly decide to stop.
To do that, the message it displays needs to be displayed in the worker
thread, after the CommandStart has run.
Also, the change will mean that CommandStart will no longer necessarily
run with the same Annex state as CommandPerform. While its docs already
said it should avoid modifying Annex state, I audited all the
CommandStart code as part of the conversion. (Note that CommandSeek
already sometimes runs with a different Annex state, and that has not been
a source of any problems, so I am not too worried that this change will
lead to breakage going forward.)
The only modification of Annex state I found was it calling
allowMessages in some Commands that default to noMessages. Dealt with
that by adding a startCustomOutput and a startingUsualMessages.
This lets a command start with noMessages and then select the output it
wants for each CommandStart.
One bit of breakage: onlyActionOn has been removed from commands that used it.
The plan is that, since a StartMessage contains an ActionItem,
when a Key can be extracted from that, the parallel job runner can
run onlyActionOn' automatically. Then commands won't need to worry about
this detail. Future work.
Otherwise, this was a fairly straightforward process of making each
CommandStart compile again. Hopefully other behavior changes were mostly
avoided.
In a few cases, a command had a CommandStart that called a CommandPerform
that then called showStart multiple times. I have collapsed those
down to a single start action. The main command to perhaps suffer from it
is Command.Direct, which used to show a start for each file, and no
longer does.
Another minor behavior change is that some commands used showStart
before, but had an associated file and a Key available, so were changed
to ShowStart with an ActionItemAssociatedFile. That will not change the
normal output or behavior, but --json output will now include the key.
This should not break it for anyone using a real json parser.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
Avoid performing repository fixups for submodules and git-worktrees
when there's a .noannex file that will prevent git-annex from being
used in the repository.
This change is ok as long as the .noannex file is really going to prevent
git-annex from being used. But, init --force could override the file.
Which would result in the repo being initialized without the fixups
having run.
To avoid that situation decided to change init, to not let --force be used
to override a .noannex file. Instead the user can just delete the file.
This is groundwork for nested seek loops, eg seeking over all files and
then performing commandActions on a list of remotes, which can be done
concurrently.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
A top-level .noannex file will prevent git-annex init from being used in a
repository. This is useful for repositories that have a policy reason not
to use git-annex. The content of the file will be displayed to the user who
tries to run git-annex init.
This also affects git annex reinit and initialization via the webapp.
It does not affect automatic inits, when there's a sibling git-annex branch
already.
This commit was supported by the NSF-funded DataLad project.
Clean up some uses of showStart with "" for the file,
or in some cases, a non-filename description string. That would
generate bad json, although none of the commands doing that
supported --json.
Using "" for the file resulted in output like "foo rest";
now the extra space is eliminated.
This commit was sponsored by Fernando Jimenez on Patreon.
Fixes a bug introduced with v6 mode that I didn't notice until now.
Probably not many v3 repos left out there, and upgrading them to v6 mode
is not disastrous, only a little premature.
This commit was sponsored by Riku Voipio
This is a work in progress. It compiles and is able to do basic command
dispatch, including git autocorrection, while using optparse-applicative
for the core commandline parsing.
* Many commands are temporarily disabled before conversion.
* Options are not wired in yet.
* cmdnorepo actions don't work yet.
Also, removed the [Command] list, which was only used in one place.
I've been disliking how the command seek actions were written for some
time, with their inversion of control and ugly workarounds.
The last straw to fix it was sync --content, which didn't fit the
Annex [CommandStart] interface well at all. I have not yet made it take
advantage of the changed interface though.
The crucial change, and probably why I didn't do it this way from the
beginning, is to make each CommandStart action be run with exceptions
caught, and if it fails, increment a failure counter in annex state.
So I finally remove the very first code I wrote for git-annex, which
was before I had exception handling in the Annex monad, and so ran outside
that monad, passing state explicitly as it ran each CommandStart action.
This was a real slog from 1 to 5 am.
Test suite passes.
Memory usage is lower than before, sometimes by a couple of megabytes, and
remains constant, even when running in a large repo, and even when
repeatedly failing and incrementing the error counter. So no accidental
laziness space leaks.
Wall clock speed is identical, even in large repos.
This commit was sponsored by an anonymous bitcoiner.
Option parsing for commands that run outside git repos is still screwy,
as there is no Annex monad and so the flags cannot be passed in. But,
any remaining parameters can be, which is enough for this fix.
This new approach allows filtering out checks from the default set that are
not appropriate for a command, rather than having to list every check
that is appropriate. It also reduces some boilerplate.
Haskell does not define Eq for functions, so I had to go a long way around
with each check having a unique id. Meh.
These were a mistake, they make the type signatures harder to read and
less flexible. The CommandSeek, CommandStart, CommandPerform, and
CommandCleanup types were a good idea, but composing them with the
parameters expected is going too far.
