* init: When a crippled filesystem causes an adjusted unlocked branch to
be used, set repo version to 7, which it neglected to do before.
* init: When on a crippled filesystem, and the git version is too old
to use an adjusted unlocked branch, fall back to using direct mode.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Seems that youtube-dl --get-filename on a playlist lists all the filenames
for the playlist, which can take quite some time. The code already only
took the first name, so --no-playlist can speed it up a lot.
This commit was sponsored by Brett Eisenberg on Patreon.
And added stack-lts-9.9.yaml to support old versions of stack.
The i386 ancient autobuilder needs stack-lts-9.9.yaml; the OSX autobuilder
may also use it for a while, and it's needed to build on eg debian stable.
That didn't actually happen, newer lts like that one are not supported
by the version of stack in Debian stable, used for the i386-ancient
autobuild, and generally I want git-annex to be buildable on stable
releases of linux distros etc. So stack.yaml is going to be stuck on old
versions for some time until some years after stack stops breaking backwards
compatability.
When a command is operating on multiple files and there's an error with
one, try harder to continue to the rest. (As was already done for many
types of errors including IO errors.)
This handles cases like lockContentForRemoval throwing an exception when
the content is already locked. Just because a drop of one file fails, does
not mean it shouldn't go on to try to drop other files.
I looked over uses of `giveup` in Command/*; there are too many to check
them all extensively, but none stood out as being problems that should let
one commandAction stop running other commandActions. Worst case, something
bad will happen and rather than stopping right away with an error,
git-annex will display multiple errors as it fails over and over on each
file. I don't think I ever really intended `error`/`giveup` to stop other
commandActions; this was a relic of old confusion over haskell exception
handling.
Test suite passes.
This commit was sponsored by Ethan Aubin.
* drop -J: Avoid processing the same key twice at the same time when
multiple annexes files use it.
This prevents a drop of a key conflicting with another drop of the same
key.
This commit was sponsored by Brock Spratlen on Patreon.
export, sync --content: Avoid unnecessarily trying to upload files to an
exporttree remote that already contains the files.
When the export was origianly made in one repo and now git-annex is
running in a different repo, the export database is not yet populated with
information about the exportLocation of files. So, it was trying to upload
the files to the export, even when it already contained them.
sync --content would first download the content from the export, and then
re-upload the content back.
And this also led to "not available" failures for each file that was not
locally present yet.
Fix: Just use checkPresentExport before uploading; if it succeeds update
the database.
This is a surprising oversight, it's possible it fixes a reversion because
I would have thought I'd have noticed this problem when originally
developing exporttree remotes.
This commit was sponsored by Jochen Bartl on Patreon.
When an export conflict prevents accessing a special remote, be clearer
about what the problem is and how to resolve it.
This commit was sponsored by Trenton Cronholm on Patreon.
Don't much like that there's no way to distinguish between having the whole
content and having an old version of the file that's bigger, but of course
resuming a http transfer can always yield the wrong result if the file on
the http server is changing, and git-annex will detect that when it
verifies the downloaded content.
This work is supported by the NIH-funded NICEMAN (ReproNim TR&D3) project.
Fix bash completion of "git annex" to propertly handle files with spaces
and other problem characters. (Completion of "git-annex" already did.)
This commit was sponsored by Jake Vosloo on Patreon.
Finishes the start made in 983c9d5a53, by
handling the case where `transfer` fails for some other reason, and so the
ReadContent callback does not get run. I don't know of a case where
`transfer` does fail other than the locking dealt with in that commit, but
it's good to have a guarantee.
StoreContent and StoreContentTo had a similar problem.
Things like `getViaTmp` may decide not to run the transfer action.
And `transfer` could certianly fail, if another transfer of the same
object was in progress. (Or a different object when annex.pidlock is set.)
If the transfer action was not run, the content of the object would
not all get consumed, and so would get interpreted as protocol commands,
which would not go well.
My approach to fixing all of these things is to set a TVar only
once all the data in the transfer is known to have been read/written.
This way the internals of `transfer`, `getViaTmp` etc don't matter.
So in ReadContent, it checks if the transfer completed.
If not, as long as it didn't throw an exception, send empty and Invalid
data to the callback. On an exception the state of the protocol is unknown
so it has to raise ProtoFailureException and close the connection,
same as before.
In StoreContent, if the transfer did not complete
some portion of the DATA has been read, so the protocol is in an unknown
state and it has to close the conection as well.
(The ProtoFailureMessage used here matches the one in Annex.Transfer, which
is the most likely reason. Not ideal to duplicate it..)
StoreContent did not ever close the protocol connection before. So this is
a protocol change, but only in an exceptional circumstance, and it's not
going to break anything, because clients already need to deal with the
connection breaking at any point.
The way this new behavior looks (here origin has annex.pidlock = true so will
only accept one upload to it at a time):
git annex copy --to origin -J2
copy x (to origin...) ok
copy y (to origin...)
Lost connection (fd:25: hGetChar: end of file)
This work is supported by the NIH-funded NICEMAN (ReproNim TR&D3) project.
Fix hang when transferring the same objects to two different clients at the
same time. (Or when annex.pidlock is used, two different objects to the
same or different clients.)
Could also potentially occur if a client was downloading an object and
somehow lost connection but that git-annex-shell was still running and
holding the transfer lock.
This does not guarantee that, if `transfer` fails for some other reason,
a DATA response will be made.
This work is supported by the NIH-funded NICEMAN (ReproNim TR&D3) project.
Not the first time this kind of test suite breakage has happened..
It would be good to avoid somehow it looking up from .t and finding a git
repo. But just running the test suite from time to time outside of
git-annex would also let me notice these before the distribution packagers
do.
This commit was sponsored by mo on Patreon.
That can leave other imported files not checked into git, because the git
command queue is not flushed when git-annex errors out. And since it only
happens once git-annex has concluded a feed is broken, it's an intermittent
bug, worst kind. Been seeing it for a while, only tracked down today.
Instead, by returning False, git-annex importfeed will cleanly shutdown and
still exit nonzero.
This commit was sponsored by Denis Dzyubenko on Patreon.
When readContent got Nothing from prepSendAnnex, it did not run its
callback, and the callback is what sends the DATA reply.
sendContent checks with contentSize that the object file is present, but
that doesn't really guarantee that prepSendAnnex won't return Nothing.
So, it was possible for a P2P protocol GET to not receive a response,
and appear to hang. When what it's really doing is waiting for the next
protocol command.
This seems most likely to happen when the annex is in direct mode, and the
file being requested has been modified. It could also happen in an indirect
mode repository if genInodeCache somehow failed. Perhaps due to a race
with a drop of the content file.
Fixed by making readContent behave the way its spec said it should,
and run the callback with L.empty in this case.
Note that, it's finee for readContent to send any amount of data
to the callback, including L.empty. sendBytes deals with that
by making sure it sends exactly the specified number of bytes,
aborting the protocol if it's too short. So, when L.empty is sent,
the protocol will end up aborting.
This work is supported by the NIH-funded NICEMAN (ReproNim TR&D3) project.
Cache high-resolution mtimes for improved detection of modified files in v7
(and direct mode).
Including on Windows.
With back-compat support so old low-res mtimes won't break anything, and
so the new information also won't break old versions of git-annex.
Removed undocumented special case in handling of a CHECKURL-MULTI response
with only a single file listed. Rather than ignoring the url that was in
the response, use it. This allows external special remotes that want to
provide some better url to do so, although I don't entirely agree with
using CHECKURL-MULTI to accomplish that. I'm more of the feeling that an
undocumented special case that throws data away is just not a good idea.
This could in theory break some external special remote program that relied
on the current behavior, but its seems unlikely that it would because such
a program must already handle the multiple url case, unless it only ever
provides a single url response to CHECKURL-MULTI.
Make addurl --file work with a single item CHECKURL-MULTI response.
It already did for external special remotes due to the special case,
but now it also will for builtin ones like the BitTorrent special remote.
This commit was sponsored by Ilya Shlyakhter on Patron.
This is safe, because while the annex object ends up executable,
there were already at least two other cases where it ended up executable:
1. git add an an executable file
2. chmod +x of a a non-executable worktree file that was hard linked to the
annex object
After copy/hard link, it always fixes up the permissions to match the mode
of the worktree file, so when an executable annex object gets hard linked
to a non-executable worktree file, its execute bit gets removed.
Commit b7c8bf5274 already *said* it would do
this; I suspect the line of code I've removed was included in that commit
accidentially.
Also improves annex.thin documentation.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
This makes --version=6 still work, despite v6 not being in
supportedVersions. Which is useful for scripts that use it.
I didn't document it on the man page, because it's indistinguishable
from an automatic upgrade after initting as v6.
init: When in a crippled filesystem, initialize a v7 repository using an
adjusted unlocked branch, instead of a direct mode repository.
Direct mode is deprecated, so this makes sense to do already I hope.
This commit was sponsored by Ole-Morten Duesund on Patreon.
Install new git hooks in this version.
This does beg the question of what to do if git later gets eg a
post-smudge hook, that could run git-annex smudge --update. I think the
thing to do in that case would be to make git-annex smudge --update
install the new hooks. That way, as the user uses git-annex, the hook
would be created pretty quickly and without needing any extra syscalls
except for when git-annex smudge --update is called.
I considered doing something like that for installation of the
post-checkout and post-merge hooks, which would have avoided the need
for v7. But the only place it was cheap to do it would be in git-annex smudge
which could cheaply notice that smudge.log didn't exist yet and so know
the hooks needed to be installed. But since smudge used to populate pointer
files, it would be quite surprising if a single git checkout/merge failed
to update the work tree, and so that idea didn't work out.
The other reason for v7 is psychological -- users don't need to worry
about whether they might be running an old version of git-annex that
doesn't support their v7 repository very well. And bug reports about
"v6" have gotten a bit of a bad association in my head since they often
hit one of the known limitations and didn't realize it was experimental.
newtyped RepoVersion Int to avoid needing 2 comparisons in
versionSupportsUnlockedPointers etc. Also it's just nicer.
This commit was sponsored by John Pellman on Patreon.
* init, upgrade: Install git post-checkout and post-merge hooks that run
git annex smudge --update.
* precommit: Run git annex smudge --update, because the post-merge
hook is not run when there is a merge conflict. So the work tree will
be updated when a commit is made to resolve the merge conflict.
* precommit: Run git annex smudge --update, because the post-merge
hook is not run when there is a merge conflict. So the work tree will
be updated when a commit is made to resolve the merge conflict.
* Note that git has no hooks run after git stash or git cherry-pick,
so the user will have to manually run git annex smudge --update
after such commands.
Nothing currently installs the hooks into v6 repos that already exist.
Something will need to be done about that, either move this behavior to v7,
or document that the user will need to manually fix up their v6 repos.
This commit was sponsored by Eric Drechsel on Patreon.
The smuge filter no longer provides git with annexed file content, to
avoid a git memory leak, and because that did not honor annex.thin.
git annex smudge --update has to be run after a checkout to update
unlocked files in the working tree with annexed file contents.
No hooks yet to run it.
This commit was sponsored by Nick Piper on Patreon.
Block other threads while the export database is being constructed (or
updated) by the first thread to try to access it.
This work is supported by the NIH-funded NICEMAN (ReproNim TR&D3) project.
This completes initial support for --hide-missing, although the
assistant still needs to be updated and it perhaps needs to be sped up,
and maybe there needs to be a way for git-annex get to operate on
missing files. Opened some more todos for those things.
This commit was sponsored by Henrik Riomar.
This relies on git ls-files --with-tree, which I'm using in a way that
its man page does not document. Hm. I emailed the git list to try to get
the docs improved, but at least the git test suite does test the same
kind of use case I'm using here.
Performance impact when not in an adjusted branch is limited to some
additional MVar accesses, and a single git call to determine the name of
the current branch. So very minimal.
When in an adjusted branch, the performance impact is
in Annex.WorkTree.lookupFile, which starts doing an equal amount of work
for files that didn't exist as it already did for files that were
unlocked.
This commit was sponsored by Jochen Bartl on Patreon.
* At long last there's a way to hide annexed files whose content
is missing from the working tree: git-annex adjust --hide-missing
* When already in an adjusted branch, running git-annex adjust
again will update the branch as needed. This is mostly
useful with --hide-missing to hide/unhide files after their content
has been dropped or received.
Still needs integration with sync and the assistant, and not as fast as it
could be, but already usable.
This commit was sponsored by Ethan Aubin.
That could cause git-annex to get confused about whether a locked file's
content was present, when the object file got touched.
Unfortunately this means more work sometimes when annex.thin is set,
since it has to checksum the file to tell if it's still got the right
content.
Had to suppress output when inAnnex calls isUnmodified, otherwise
"(checksum...)" would be printed in places it ought not to be,
eg "git annex get" could turn out not need to get anything, and
so only display that.
This commit was sponsored by Ole-Morten Duesund on Patreon.
This is to work around https://github.com/datalad/datalad/issues/2769
which I don't know how to reproduce outside that environment, nor do I
understand the root cause of. For some time, Neurodebian has been working
around it by building its standalone debs with a patch that disables use
of the locales bundled with the standalone build, letting the system
locales be used.
Using the system locales is asking for trouble if there's
significant version skew between the system and bundled glibc, and
possibly also if the architeciture is different, or whatever. That's why
git-annex bundles and uses its own locales, because numerous users
reported real problems with using the system locales.
... However, in the specific case of the Neurodebian standalone debs,
the deb is built on a system very like the one it's targeted to be
installed on. Or well, so they assure me, although doc/install/Ubuntu.mdwn
also promotes those for use across all versions of Ubuntu, and the deb
is built avoiding xz so it will work with old versions of dpkg, so I wonder
how true it is. It does seem that, at least currently, there is no bad
version skew in the locales of the systems the deb is used on, since
it's already been using the system locales for some time.
Anyway, since the Neurodebian build already is setting
GIT_ANNEX_PACKAGE_INSTALL=1 in runshell, I made runshell use system
locales when that's set. This is a small scope creep for
GIT_ANNEX_PACKAGE_INSTALL, but it's not documented and AFAIK only used
for the Neurodebian build, so that seems ok. This will let them stop
carrying their patch for this forward.
This work is supported by the NIH-funded NICEMAN (ReproNim TR&D3) project.
The bundled uname -o says Linux in termux; have runshell on Android
delete it so the termux one is used instead.
This fixes the webapp so it will enter Android mode.
This commit was sponsored by mo on Patreon.
Running git-annex linux builds in termux seems to work well enough that the
only reason to keep the Android app would be to support Android 4-5, which
the old Android app supported, and which I don't know if the termux method
works on (although I see no reason why it would not).
According to [1], Android 4-5 remains on around 29% of devices, down from
51% one year ago.
[1] https://www.statista.com/statistics/271774/share-of-android-platforms-on-mobile-devices-with-android-os/
This is a rather large commit, but mostly very straightfoward removal of
android ifdefs and patches and associated cruft.
Also, removed support for building with very old ghc < 8.0.1, and with
yesod < 1.4.3, and without concurrent-output, which were only being used
by the cross build.
Some documentation specific to the Android app (screenshots etc) needs
to be updated still.
This commit was sponsored by Brett Eisenberg on Patreon.
