A few places were reading the max symlink size of a pointer file,
then passing tp parseLinkTargetOrPointer. Which is fine currently, but
to support pointer files with lines of data after the pointer, enough
has to be read that parseLinkTargetOrPointer can be assured of seeing
enough of that data to know if it's correctly formatted.
Sponsored-by: Dartmouth College's Datalad project
Seems that --no-ext-diff and -c diff.external= are not enough to disable
external diff command when gitattributes textconv specifies it.
I'm pretty sure that --no-ext-diff and -c diff.external= are not both
needed, but not 100%. Something about -G may need the latter to fully
disable diffs in some cases. So kept that part as it was.
Sponsored-by: Dartmouth College's Datalad project
Do not populate the keys database with associated files,
because a bare repo has no working tree, and so it does not make sense to
populate it.
Queries of associated files in the keys database always return empty lists
in a bare repo, even if it's somehow populated. One way it could be
populated is if a user converts a non-bare repo to a bare repo.
Note that Git.Config.isBare does a string comparison, so this is not free!
But, that string comparison is very small compared to a sqlite query.
Sponsored-by: Erik Bjäreholt on Patreon
This is a potentially breaking change in a very delicate area. However,
examining the code path for writes, I don't see any benefit to opening a
second db connection for them. If the write throws an exception,
commitDb will retry it with a new db connection.
A potential benefit to not opening a second db connection, beyond using
less resources, is it just might avoid problems in WSL with sqlite that
I have hypothesized are caused by multiple db connections.
Commit 5f9eff3f32 explains why it needs to
shut down the db connection to force the database to be updated on disk:
When closeDb does not get called, garbage collection of DbHandle may not
give the workterThread time to cleanly shut down before git-annex exits,
resulting in a recently written change not reaching disk.
After commit f4bdecc4ec, there is no
longer any distinction between SingleWriter and MultiWriter's handling
of read after write.
Databases that were SingleWriter still have lock files that are used to
prevent multiple writers.
This does make writing to such databases a bit more expensive,
because the MultiWriter code path that is now used opens a second db
connection in order to write to them.
This removes a messy caveat that was easy to forget and caused at least one
bug. The price paid is that, after a write to a MultiWriter db, it has to
close the db connection that it had been using to read, and open a new
connection. So it might be a little bit slower. But, writes are usually
batched together, so there's often only a single write, and so there should
not be much of a slowdown. Notice that SingleWriter already closed the db
connection after a write, so paid the same overhead.
This is the second try at fixing a bug: git-annex get when run as the first
git-annex command in a new repo did not populate all unlocked files.
(Reversion in version 8.20210621)
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
This adds the overhead of a copy when serializing and deserializing keys.
I have not benchmarked much, but runtimes seem barely changed at all by that.
When a lot of keys are in memory, it improves memory use.
And, it prevents keys sometimes getting PINNED in memory and failing to GC,
which is a problem ByteString has sometimes. In particular, git-annex sync
from a borg special remote had that problem and this improved its memory
use by a large amount.
Sponsored-by: Shae Erisson on Patreon
This eliminates the distinction between decodeBS and decodeBS', encodeBS
and encodeBS', etc. The old implementation truncated at NUL, and the
primed versions had to do extra work to avoid that problem. The new
implementation does not truncate at NUL, and is also a lot faster.
(Benchmarked at 2x faster for decodeBS and 3x for encodeBS; more for the
primed versions.)
Note that filepath-bytestring 1.4.2.1.8 contains the same optimisation,
and upgrading to it will speed up to/fromRawFilePath.
AFAIK, nothing relied on the old behavior of truncating at NUL. Some
code used the faster versions in places where I was sure there would not
be a NUL. So this change is unlikely to break anything.
Also, moved s2w8 and w82s out of the module, as they do not involve
filesystem encoding really.
Sponsored-by: Shae Erisson on Patreon
This is a result of an audit of every use of getInodeCaches,
to find places that misbehave when the annex object is not in the inode
cache, despite pointer files for the same key being in the inode cache.
Unfortunately, that is the case for objects that were in v7 repos that
upgraded to v8. Added a note about this gotcha to getInodeCaches.
Database.Keys.reconcileStaged, then annex.thin is set, would fail to
populate pointer files in this situation. Changed it to check if the
annex object is unmodified the same way inAnnex does, falling back to a
checksum if the inode cache is not recorded.
Sponsored-by: Dartmouth College's Datalad project
In Annex.Content, the object file was statted after pointer files were
populated. But if annex.thin is set, once the pointer files are
populated, the object file can potentially be modified via the hard
link. So, it was possible, though seemingly very unlikely, for the inode
of the modified object file to be cached.
Command.Fix and Command.Fsck had similar problems, statting the work
tree files after they were in place. Changed them to stat the temp file
that gets moved into place. This does rely on .git/annex being on the
same filesystem. If it's not, the cached inode will not be the same as
the one that the temp file gets moved to. Result will be that git-annex
will later need to do an expensive verification of the content of the
worktree files. Note that the cross-filesystem move of the temp file
already is a larger amount of extra work, so this seems acceptable.
Sponsored-by: Luke Shumaker on Patreon
Most of this is just refactoring. But, handleDropsFrom
did not verify that associated files from the keys db were still
accurate, and has now been fixed to.
A minor improvement to this would be to avoid calling catKeyFile
twice on the same file, when getting the numcopies and mincopies value,
in the common case where the same file has the highest value for both.
But, it avoids checking every associated file, so it will scale well to
lots of dups already.
Sponsored-by: Kevin Mueller on Patreon
Clear visible progress bar first.
Removed showSideActionAfter because it can't be used in reconcileStaged
(import loop). Instead, it counts the number of files it
processes and displays it after it's seen a sufficient to know it's
taking a while.
Sponsored-by: Dartmouth College's Datalad project
Following commit c941ab6f5b, this avoids
the second, redundant scan when annex.thin is not set.
The benchmark now runs in 35.5 seconds, down from 40 seconds.
Note that the inode cache of the annex object has to be passed to
addInodeCaches now, because it might not already be in the inode caches,
unlike previously.
Sponsored-by: Dartmouth College's Datalad project
reconcileStaged populates the db, so scanAnnexedFiles does not need to
do it again. It still makes a pass over the HEAD tree, but populating
the db was most of the expensive part.
Benchmarking with 100,000 files, git-annex init now takes 40 seconds,
vs 37 seconds with the old, buggy version of this fix. It should be
possible to win those 3 precious seconds per 100k files back, in the
case when when annex.thin is not set, with improvements to reconcileStaged
that avoid needing this second pass.
Sponsored-by: Dartmouth College's Datalad project
This reverts commit 0f10f208a7.
The implementation of this turns out to be unsafe; it can lead to a keys
db deadlock. scanAnnexedFiles injects a call to inAnnex into
reconcileStaged, but inAnnex sometimes needs to read from the keys db,
which will try to re-open it when it's in the process of being opened.
The exclusive lock of gitAnnexKeysDbLock will then deadlock.
This needs to be done in some other way...
Rather than first deleting and then inserting, upsert lets the key
associated with a file be updated in place.
Benchmarked with 100,000 files, and an empty keys database, running
reconcileStaged. It improved from 47 seconds to 34 seconds.
So this got reconcileStaged to be as fast as scanAssociatedFiles,
or faster -- scanAssociatedFiles benchmarks at 37 seconds.
(Also checked for other users of deleteWhere that could be sped up by
upsert. There are a couple, but they are not in performance critical
code paths, eg recordExportTreeCurrent is only run once per tree
export.)
I would have liked to rename FileKeyIndex to FileKeyUnique since it is
being used as a uniqueness constraint now, not just to get an index.
But, that gets converted into part of the SQL schema, and the name
is used by the upsert, so it can't be changed.
Sponsored-by: Dartmouth College's Datalad project
reconcileStaged was doing a redundant scan to scannAnnexedFiles.
It would probably make sense to move the body of scannAnnexedFiles
into reconcileStaged, the separation does not really serve any purpose.
Sponsored-by: Dartmouth College's Datalad project
Commit 428c91606b made it need to do more
work in situations like switching between very different branches.
Compare with seekFilteredKeys which has a similar optimisation. Might be
possible to factor out the common part from these?
Sponsored-by: Dartmouth College's Datalad project
This is quite a subtle edge case, see the bug report for full details.
The second git diff is needed only when there's a merge conflict.
It would be possible to speed it up marginally by using
--diff-filter=Unmerged, but probably not enough to bother with.
Sponsored-by: Graham Spencer on Patreon
It makes sense to keep the key used by the old version of an
associated file, until the merge conflict is resolved.
Note that, since in this case git diff is being run with --index, it's
not possible to use -1 or -3, which would let the keys
associated with the new versions of the file also be added. That would
be better, because it's possible that the local modification to the file
that caused the merge conflict has not yet gotten its new key recorded
in the db.
Opened a bug about a case this is thus not able to address.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
There seems to be no reason to check the time here. I think it was
inherited from code in Database.Fsck, which does have a reason to commit
every few minutes. Removing that syscall speeds up a git-annex init
in a repo with 100000 annexed files by about 3 seconds.
Sponsored-by: Dartmouth College's Datalad project
git-annex test hung, at varying points depending
on when git decided to run the smudge clean filter.
Recent changes to reconcileStaged caused a deadlock, when git write-tree
for some reason decides to run the smudge clean filter. Which tries
to open the keys db, and blocks waiting for the lock file that its
grandparent has locked.
I don't know why git write-tree does that. It's supposed to only write a
tree from the index which needs no smudge/clean filtering.
I've verified that, in a situation where git write-tree runs the clean
filter, disabling the filter results in a tree being written that
contains the annex link, not eg, the worktree file content. So it seems
safe to disable the clean filter, but also this seems likely to be
working around a bug in git because it seems it is running the clean
filter in a situation where the object has already been cleaned.
Sponsored-by: Dartmouth College's Datalad project
When the keys db is opened for read, and did not exist yet, it used to
skip creating it, and return mempty values. But that prevents
reconcileStaged from populating associated files information in time for
the read. This fixes the one remaining case I know of where
the fix in a56b151f90 didn't work.
Note that, when there is a permissions error, it still avoids creating
the db and returns mempty for all queries. This does mean that
reconcileStaged does not run and so it may want to drop files that it
should not. However, presumably a permissions error on the keys database
also means that the user does not have permission to delete annex
objects, so they won't be able to drop the files anyway.
Sponsored-by: Dartmouth College's Datalad project
All code that uses associated files already deals with this problem,
which used to be worse. Unfortunately I was not able to entirely
eliminate it, although it happens in fewer cases now.
Eg, when git commit runs the smudge filter.
Commit 428c91606b introduced the crash,
as write-tree fails in those situations. Now it will work, and git-annex
always gets up-to-date information even in those situations. It does
need to do a bit more work, each time git-annex is run with the index
locked. Although if the index is unmodified from the last time
write-tree succeeded, that work is avoided.
Before only unlocked files were included.
The initial scan now scans for locked as well as unlocked files. This
does mean it gets a little bit slower, although I optimised it as well
as I think it can be.
reconcileStaged changed to diff from the current index to the tree of
the previous index. This lets it handle deletions as well, removing
associated files for both locked and unlocked files, which did not
always happen before.
On upgrade, there will be no recorded previous tree, so it will diff
from the empty tree to current index, and so will fully populate the
associated files, as well as removing any stale associated files
that were present due to them not being removed before.
reconcileStaged now does a bit more work. Most of the time, this will
just be due to running more often, after some change is made to the
index, and since there will be few changes since the last time, it will
not be a noticable overhead. What may turn out to be a noticable
slowdown is after changing to a branch, it has to go through the diff
from the previous index to the new one, and if there are lots of
changes, that could take a long time. Also, after adding a lot of files,
or deleting a lot of files, or moving a large subdirectory, etc.
Command.Lock used removeAssociatedFile, but now that's wrong because a
newly locked file still needs to have its associated file tracked.
Command.Rekey used removeAssociatedFile when the file was unlocked.
It could remove it also when it's locked, but it is not really
necessary, because it changes the index, and so the next time git-annex
run and accesses the keys db, reconcileStaged will run and update it.
There are probably several other places that use addAssociatedFile and
don't need to any more for similar reasons. But there's no harm in
keeping them, and it probably is a good idea to, if only to support
mixing this with older versions of git-annex.
However, mixing this and older versions does risk reconcileStaged not
running, if the older version already ran it on a given index state. So
it's not a good idea to mix versions. This problem could be dealt with
by changing the name of the gitAnnexKeysDbIndexCache, but that would
leave the old file dangling, or it would need to keep trying to remove
it.
smudge: Fix a case where an unlocked annexed file that annex.largefiles
does not match could get its unchanged content checked into git, due to git
running the smudge filter unecessarily.
When the file has the same inodecache as an already annexed file,
we can assume that the user is not intending to change how it's stored in
git.
Note that checkunchangedgitfile already handled the inverse case, where the
file was added to git previously. That goes further and actually sha1
hashes the new file and checks if it's the same hash in the index.
It would be possible to generate a key for the file and see if it's the
same as the old key, however that could be considerably more expensive than
sha1 of a small file is, and it is not necessary for the case I have, at
least, where the file is not modified or touched, and so its inode will
match the cache.
git-annex add was changed, when adding a small file, to remove the inode
cache for it. This is necessary to keep the recipe in
doc/tips/largefiles.mdwn for converting from annex to git working.
It also avoids bugs/case_where_using_pathspec_with_git-commit_leaves_s.mdwn
which the earlier try at this change introduced.
Values in AnnexRead can be read more efficiently, without MVar overhead.
Only a few things have been moved into there, and the performance
increase so far is not likely to be noticable.
This is groundwork for putting more stuff in there, particularly a value
that indicates if debugging is enabled.
The obvious next step is to change option parsing to not run in the
Annex monad to set values in AnnexState, and instead return a pure value
that gets stored in AnnexRead.
persistent stopped using askLogFunc, and the thing to use is askLoggerIO
from monad-logger. Bumped the dep to the first version that contained that.
Note that the i386ancient build uses a newer monad-logger than 0.3.10,
so the new versioned dep should not break it, and presumably nothing else
either.
This commit was sponsored by Noam Kremen on Patreon.
This solves the problem that import of such files gets confused and
converts them back to annexed files.
The import code already used GIT keys internally when it determined a
file should not be annexed. So now when it sees a GIT key that export
used, it already does the right thing.
This also means that even older version of git-annex can import and will
do the right thing, once a fixed version has exported. Still, there may
be other complications around upgrades; still need to think it all
through.
Moved gitShaKey and keyGitSha from Key to Annex.Export since they're
only used for export/import.
Documented GIT keys in backends, since they do appear in the git-annex
branch now.
This commit was sponsored by Graham Spencer on Patreon.
* add: Significantly speed up adding lots of non-large files to git,
by disabling the annex smudge filter when running git add.
* add --force-small: Run git add rather than updating the index itself,
so any other smudge filters than the annex one that may be enabled will
be used.
For reasons explained in the bug report.
Implemented using a persistent migration, which works fine. It may add a
little startup overhead when a remote is enabled that uses this, but
probably un-noticable.
On the next major version, it would be fine to delete this database,
and regenerate it from the git-annex branch information. Then this
change could be reverted.
Did nothing about adding back the data that got dropped from the db
due to the bug. Only the borg special remote was probably affected,
and it's not been released yet. rm -rf .git/annex/cidsdb does work.
Lots of nice wins from this in avoiding unncessary work, and I think
nothing got slower.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Broke a while ago during optimisation work, and not noticed since the flag
is disabled by default.
This commit was sponsored by Brock Spratlen on Patreon.
