In several cases, there's an old, maybe unmaintained special remote,
and rclone also supports the service. I don't know which is better,
so I added tips pages for these, listing both possibilies, so users can
fill in the details.
Added some things listed in special_remotes/rclone that were not
in the cloud provider list, so users will see it supports those.
But, omitted S3 and webdav, since it's probably better for users to use
what's built into git-annex than going via rclone.
The rclone list is out of date apparently, as rclone.org has more,
so I added a note at the bottom for users to check.
This commit was sponsored by Ethan Aubin.
options make it easier to override annex.largefiles configuration
(and potentially safer as it avoids bugs like the smudge bug fixed
in the last release)
Deleted some old comments that were posted to the man page discussing such
options.
Updated docs that used -c annex.largefiles to use the options.
Note that addSmallOverridden was needed to avoid the clean filter running
on the file. It would be possible to make addFile also update the index
directly, rather than going via git add. However, it was not necessary,
and I want to avoid breaking on some edge case, particularly if the code in
addSmallOverridden has some oversight.
Also, when annex.addunlocked is set and annex.largefiles does not match a file,
git annex add --force-large works, but git status will then show the file
as added, with a unstaged modification. The unstaged modification adds the
file to git. This is identical behavior to using -c annex.largefiles=nothing
when annex.addunlocked is set. This does not prevent committing what was
intended to be added. I have not gotten to the bottom of why git thinks
the file is modified and runs it through the clean filter in this case.
* annex.addunlocked can be set to an expression with the same format used by
annex.largefiles, in case you want to default to unlocking some files but
not others.
* annex.addunlocked can be configured by git-annex config.
Added a git-annex-matching-expression man page, broken out from
tips/largefiles.
A tricky consequence of this is that git-annex add --relaxed
honors annex.addunlocked, but an expression might want to know the size
or content of an url, which it's not going to download. I decided it was
better not to fail, and just dummy up some plausible data in that case.
Performance impact should be negligible. The global config is already
loaded for annex.largefiles. The expression only has to be parsed once,
and in the simple true/false case, it should not do any additional work
matching it.
annex.largefiles can be configured by git-annex config, to more easily set
a default that will also be used by clones, without needing to shoehorn the
expression into the gitattributes file. The git config and gitattributes
override that.
Whenever something is added to git-annex config, we have to consider what
happens if a user puts a purposfully bad value in there. Or, if a new
git-annex adds some new value that an old git-annex can't parse.
In this case, a global annex.largefiles that can't be parsed currently
makes an error be thrown. That might not be ideal, but the gitattribute
behaves the same, and is almost equally repo-global.
Performance notes:
git-annex add and addurl construct a matcher once
and uses it for every file, so the added time penalty for reading the global
config log is minor. If the gitattributes annex.largefiles were deprecated,
git-annex add would get around 2% faster (excluding hashing), because
looking that up for each file is not fast. So this new way of setting
it is progress toward speeding up add.
git-annex smudge does need to load the log every time. As well as checking
the git attribute. Not ideal. Setting annex.gitaddtoannex=false avoids
both overheads.
* git-lfs: The url provided to initremote/enableremote will now be
stored in the git-annex branch, allowing enableremote to be used without
an url. initremote --sameas can be used to add additional urls.
* git-lfs: When there's a git remote with an url that's known to be
used for git-lfs, automatically enable the special remote.
Code change should be trvial, but not yet implemented. This
significantly complicated the task of documenting how git-annex works.
I'm not sure how useful the annex.gitaddtoannex confguration is after
this change; seems that if a user has an annex.largefiles they will want
it applied consistently. But the last thing I want to hear is more
complaining from users about git add doing something they don't want it
to.
There's a pretty high risk users who got used to the git add behavior
and don't have annex.largefiles configured will miss the NEWS and
complain bitterly about their suddenly bloated repositories. Oh well.
Removed outdated comments about the old behavior to avoid confusion.
I don't know if I've found all the places that griping spread to.
* Automatically convert direct mode repositories to v7 with adjusted
unlocked branches and set annex.thin.
* init: When run on a crippled filesystem with --version=5,
will error out, since version 7 is needed for adjusted unlocked branch.
* direct: This command always errors out as direct mode is no longer
supported.
* indirect: This command has become a deprecated noop.
* proxy: This command is deprecated because it was only needed in direct
mode. (But it continues to work.)
Also removed mentions of direct mode throughough the documentation.
I have not removed all the direct mode code yet.
* merge: When run with a branch parameter, merges from that branch.
This is especially useful when using an adjusted branch, because
it applies the same adjustment to the branch before merging it.
Since v6 is not a usable repo version any longer, it's confusing to have
documentation that refers to it.
This commit was sponsored by Peter on Patreon.
Renamed annex.security.allowed-http-addresses to
annex.security.allowed-ip-addresses because it is not really specific to
the http protocol, also limiting eg, git-annex's use of ftp and via
youtube-dl, several other protocols.
The old name for the config will still work.
If both old and new name are set, the new name will win.
* Added mimeencoding= term to annex.largefiles expressions.
This is probably mostly useful to match non-text files with eg
"mimeencoding=binary"
* git-annex matchexpression: Added --mimeencoding option.
Install new git hooks in this version.
This does beg the question of what to do if git later gets eg a
post-smudge hook, that could run git-annex smudge --update. I think the
thing to do in that case would be to make git-annex smudge --update
install the new hooks. That way, as the user uses git-annex, the hook
would be created pretty quickly and without needing any extra syscalls
except for when git-annex smudge --update is called.
I considered doing something like that for installation of the
post-checkout and post-merge hooks, which would have avoided the need
for v7. But the only place it was cheap to do it would be in git-annex smudge
which could cheaply notice that smudge.log didn't exist yet and so know
the hooks needed to be installed. But since smudge used to populate pointer
files, it would be quite surprising if a single git checkout/merge failed
to update the work tree, and so that idea didn't work out.
The other reason for v7 is psychological -- users don't need to worry
about whether they might be running an old version of git-annex that
doesn't support their v7 repository very well. And bug reports about
"v6" have gotten a bit of a bad association in my head since they often
hit one of the known limitations and didn't realize it was experimental.
newtyped RepoVersion Int to avoid needing 2 comparisons in
versionSupportsUnlockedPointers etc. Also it's just nicer.
This commit was sponsored by John Pellman on Patreon.
(Still need to make git annex sync --content update the adjusted branch
to expose files it downloaded, which this relies on.)
This commit was sponsored by Ewen McNeill on Patreon.
* Added arm64 Linux standalone build. (No autobuilder yet.)
* Improved termux installation process.
Added git-annex-install.sh script to avoid user needing to type as much in
termux. The scope of this script is limited; runshell handles the rest.
Runshell runs termux-fix-shebang on the shell scripts. The problem is
the bundled bin/sh script, deleting that script also works, but then the
others probably use the system Android /bin/sh, which could be old or
broken or not posix or whatever. Using termux sh to run the scripts is
better.
This commit was sponsored by Eric Drechsel on Patreon.
v6: When annex.largefiles is not configured for a file, running git add or
git commit, or otherwise using git to stage a file will add it to the annex
if the file was in the annex before, and to git otherwise. This is to avoid
accidental conversion.
Note that git-annex add's behavior has not changed, for reasons explained
in the added comment.
Performance: No added overhead when annex.largefiles is configured.
When not configured, there is an added call to catObjectMetaData,
which involves a round trip through git cat-file --batch.
However, the earlier catKeyFile primes the cache for it.
This commit was supported by the NSF-funded DataLad project.
Use git update-index --refresh, since it's a little bit more
efficient and the user can be told to run it if a locked index prevents
git-annex from running it.
This also fixes the problem where an annexed file was deleted in the index
and a get of another file that uses the same key caused the index update to
add back the deleted file. update-index will not add back the deleted file.
Documented in tips/unlocked_files.mdwn the gotcha that the index update
may conflict with other operations. I can't see any way to possibly avoid
that conflict.
One new todo about a race that causes a modification to be accidentially
staged.
Note that the assistant only flushes the git command queue when it
commits a modification. I have not tested the assistant with v6 unlocked
files, but assume most users of the assistant won't care if the index
shows a file as modified for a while.
This commit was supported by the NSF-funded DataLad project.
It was sorting by uuid, rather than cost!
Avoid future bugs of this kind by changing the Ord to primarily compare
by cost, with uuid only used when the cost is the same.
This commit was supported by the NSF-funded DataLad project.
