When a file in the export is renamed, and the remote's renameExport
returned Nothing, renaming to the temp file would first say it was
renaming, and appear to succeed, but actually what it did was delete the
file. Then renaming from the temp file would not do anything, since the
temp file is not present on the remote. This appeared as if a file got
renamed to a temp file and left there.
Note that exporttree=yes importree=yes remotes have their usual
renameExport replaced with one that returns Nothing. (For reasons
explained in Remote.Helper.ExportImport.) So this happened
even with remotes that support renameExport.
Fix by letting renameExport = Nothing when it's not supported at all.
This avoids displaying the rename.
Sponsored-by: Graham Spencer on Patreon
This is groundwork for making special remotes like borg be skipped by
sync when on an offline drive.
Added AVAILABILITY UNAVAILABLE reponse and the UNAVAILABLERESPONSE extension
to the external special remote protocol. The extension is needed because
old git-annex, if it sees that response, will display a warning
message. (It does continue as if the remote is globally available, which
is acceptable, and the warning is only displayed at initremote due to
remote.name.annex-availability caching, but still it seemed best to make
this a protocol extension.)
The remote.name.annex-availability git config is no longer used any
more, and is documented as such. It was only used by external special
remotes to cache the availability, to avoid needing to start the
external process every time. Now that availability is queried as an
Annex action, the external is only started by sync (and the assistant),
when they actually check availability.
Sponsored-by: Nicholas Golder-Manning on Patreon
* S3: Amazon S3 buckets created after April 2023 do not support ACLs,
so public=yes cannot be used with them. Existing buckets configured
with public=yes will keep working.
* S3: Allow setting publicurl=yes without public=yes, to support
buckets that are configured with a Bucket Policy that allows public
access.
Sponsored-by: Joshua Antonishen on Patreon
This does, as a side effect, make long notes in json output not
be indented. The indentation is only needed to offset them
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brock Spratlen on Patreon
Converted warning and similar to use StringContainingQuotedPath. Most
warnings are static strings, some do refer to filepaths that need to be
quoted, and others don't need quoting.
Note that, since quote filters out control characters of even
UnquotedString, this makes all warnings safe, even when an attacker
sneaks in a control character in some other way.
When json is being output, no quoting is done, since json gets its own
quoting.
This does, as a side effect, make warning messages in json output not
be indented. The indentation is only needed to offset warning messages
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brett Eisenberg on Patreon
S3: Support a region= configuration useful for some non-Amazon S3
implementations. This feature needs git-annex to be built with aws-0.24.
datacenter= sets both the AWS hostname and region in one setting, which is
easy when using AWS, but not useful for other hosts. So kept datacenter
as-is, but added this additional config.
Sponsored-By: Brett Eisenberg on Patreon
Note that when this is specified and an older git-annex is used to
enableremote such a special remote, it will simply ignore the cost= field
and use whatever the default cost is.
In passing, fixed adb to support the remote.name.cost and
remote.name.cost-command configs.
Sponsored-by: Dartmouth College's DANDI project
aws-0.23 has been released.
When built with an older aws, initremote will error out when run
with signature=anonymous. And when a remote has been initialized with
that by a version of git-annex that does support it, older versions will
fail when the remote is accessed, with a useful error message.
Sponsored-by: Dartmouth College's DANDI project
S3: Speed up importing from a large bucket when fileprefix= is set by only
asking for files under the prefix.
getBucket still returns the files with the prefix included, so the rest of
the fileprefix stripping still works unchanged.
Sponsored-by: Dartmouth College's DANDI project
This can be used, for example, with importtree=yes to import from a public
bucket.
This needs a patch that has not yet landed in the aws library, and will
need to be adjusted to support compiling with old versions of the library,
so is not yet suitable for merging.
See https://github.com/aristidb/aws/pull/281
The stack.yaml changes are provided to show how to build against the aws
fork and will need to be reverted as well.
Sponsored-by: Dartmouth College's DANDI project
This partly fixes an issue where there are duplicate files in the
special remote, and the first file gets swapped with another duplicate,
or deleted. The swap case is fixed by this, the deleted case will need
other changes.
This makes retrieveExportWithContentIdentifier take a list of allowed
ContentIdentifier, same as storeExportWithContentIdentifier,
removeExportWithContentIdentifier, and
checkPresentExportWithContentIdentifier.
Of the special remotes that support importtree, borg is a special case
and does not use content identifiers, S3 I assume can't get mixed up
like this, directory certainly has the problem, and adb also appears to
have had the problem.
Sponsored-by: Graham Spencer on Patreon
It does not make sense for either; importing from an existing bucket should
not write to it. And the user may not have write access at all. And exporting to
a bucket should not write other files.
Also this prevents the uuid file being imported after being written.
Sponsored-by: Dartmouth College's DANDI project
None of the special remotes do it yet, but this lays the groundwork.
Added MustFinishIncompleteVerify so that, when an incremental verify is
started but not complete, it can be forced to finish it. Otherwise, it
would have skipped doing it when verification is disabled, but
verification must always be done when retrievin from export remotes
since files can be modified during retrieval.
Note that retrieveExportWithContentIdentifier doesn't support incremental
verification yet. And I'm not sure if it can -- it doesn't know the Key
before it downloads the content. It seems a new API call would need to
be split out of that, which is provided with the key.
Sponsored-by: Dartmouth College's Datalad project
This improves the borg special remote memory usage, by
letting it only load one archive's worth of filenames into memory at a
time, and building up a larger tree out of the chunks.
When a borg repository has many archives, git-annex could easily OOM
before. Now, it will use only memory proportional to the number of
annexed keys in an archive.
Minor implementation wart: Each new chunk re-opens the content
identifier database, and also a new vector clock is used for each chunk.
This is a minor innefficiency only; the use of continuations makes
it hard to avoid, although putting the database handle into a Reader
monad would be one way to fix it.
It may later be possible to extend the ImportableContentsChunkable
interface to remotes that are not third-party populated. However, that
would perhaps need an interface that does not use continuations.
The ImportableContentsChunkable interface currently does not allow
populating the top of the tree with anything other than subtrees. It
would be easy to extend it to allow putting files in that tree, but borg
doesn't need that so I left it out for now.
Sponsored-by: Noam Kremen on Patreon
* When downloading urls fail, explain which urls failed for which
reasons.
* web: Avoid displaying a warning when downloading one url failed
but another url later succeeded.
Some other uses of downloadUrl use urls that are effectively internal use,
and should not all be displayed to the user on failure. Eg, Remote.Git
tries different urls where content could be located depending on how the
remote repo is set up. Exposing those urls to the user would lead to wild
goose chases. So had to parameterize it to control whether it displays urls
or not.
A side effect of this change is that when there are some youtube urls
and some regular urls, it will try regular urls first, even if the
youtube urls are listed first. This seems like an improvement if
anything, but in any case there's no defined order of urls that it's
supposed to use.
Sponsored-by: Dartmouth College's Datalad project
Except when configuration makes curl be used. It did not seem worth
trying to tail the file when curl is downloading.
But when an interrupted download is resumed, it does not read the whole
existing file to hash it. Same reason discussed in
commit 7eb3742e4b76d1d7a487c2c53bf25cda4ee5df43; that could take a long
time with no progress being displayed. And also there's an open http
request, which needs to be consumed; taking a long time to hash the file
might cause it to time out.
Also in passing implemented it for git and external special remotes when
downloading from the web. Several others like S3 are within striking
distance now as well.
Sponsored-by: Dartmouth College's DANDI project
Added fileRetriever', which will let the remaining special remotes
eventually also support incremental verify.
Sponsored-by: Dartmouth College's DANDI project
Several special remotes verify content while it is being retrieved,
avoiding a separate checksum pass. They are: S3, bup, ddar, and
gcrypt (with a local repository).
Not done when using chunking, yet.
Complicated by Retriever needing to change to be polymorphic. Which in turn
meant RankNTypes is needed, and also needed some code changes. The
change in Remote.External does not change behavior at all but avoids
the type checking failing because of a "rigid, skolem type" which
"would escape its scope". So I refactored slightly to make the type
checker's job easier there.
Unfortunately, directory uses fileRetriever (except when chunked),
so it is not amoung the improved ones. Fixing that would need a way for
FileRetriever to return a Verification. But, since the file retrieved
may be encrypted or chunked, it would be extra work to always
incrementally checksum the file while retrieving it. Hm.
Some other special remotes use fileRetriever, and so don't get incremental
verification, but could be converted to byteRetriever later. One is
GitLFS, which uses downloadConduit, which writes to the file, so could
verify as it goes. Other special remotes like web could too, but don't
use Remote.Helper.Special and so will need to be addressed separately.
Sponsored-by: Dartmouth College's DANDI project
This fixes fsck of a remote that uses chunking displaying
(checking remotename) (checking remotename)" for every chunk.
Also, some remotes displayed the message, and others did not, with no
consistency. It was originally displayed only when accessing remotes
that were expensive or might involve a password prompt, I think, but
nothing in the API said when to do it so it became an inconsistent mess.
Originally I thought fsck should always display it. But it only displays
in fsck --from remote, so the user knows the remote is being accessed,
so there is no reason to tell them it's accessing it over and over.
It was also possible for git-annex move to sometimes display it twice,
due to checking if content is present twice. But, the user of move
specifies --from/--to, so it does not need to display when it's
accessing the remote, as the user expects it to access the remote.
git-annex get might display it, but only if the remote also supports
hasKeyCheap, which is really only local git remotes, which didn't
display it always; and in any case nothing displayed it before hasKeyCheap,
which is checked first, so I don't think this needs to display it ever.
mirror is like move. And that's all the main places it would have been
displayed.
This commit was sponsored by Jochen Bartl on Patreon.
This uses a DebugSelector, rather than debug levels, which will allow
for a later option like --debug-from=Process to only
see debuging about running processes.
The module name that contains the thing being debugged is used as the
DebugSelector (in most cases; does not need to be a hard and fast rule).
Debug calls were changed to add that. hslogger did not display
that first parameter to debugM, but the DebugSelector does get
displayed.
Also fastDebug will allow doing debugging in places that are used in
tight loops, with the DebugSelector coming from the Annex Reader
essentially for free. Not done yet.
When autoenabling special remotes of type S3, weddav, or glacier, do not
take login credentials from environment variables, as the user may not be
expecting the autoenable to happen, and may have those set for other
purposes.
This is to support, eg a borg repo as a special remote, which is
populated not by running git-annex commands, but by using borg. Then
git-annex sync lists the content of the remote, learns which files are
annex objects, and treats those as present in the remote.
So, most of the import machinery is reused, to a new purpose. While
normally importtree maintains a remote tracking branch, this does not,
because the files stored in the remote are annex object files, not
user-visible filenames. But, internally, a git tree is still generated,
of the files on the remote that are annex objects. This tree is used
by retrieveExportWithContentIdentifier, etc. As with other import/export
remotes, that the tree is recorded in the export log, and gets grafted
into the git-annex branch.
importKey changed to be able to return Nothing, to indicate when an
ImportLocation is not an annex object and so should be skipped from
being included in the tree.
It did not seem to make sense to have git-annex import do this, since
from the user's perspective, it's not like other imports. So only
git-annex sync does it.
Note that, git-annex sync does not yet download objects from such
remotes that are preferred content. importKeys is run with
content downloading disabled, to avoid getting the content of all
objects. Perhaps what's needed is for seekSyncContent to be run with these
remotes, but I don't know if it will just work (in particular, it needs
to avoid trying to transfer objects to them), so I skipped that for now.
(Untested and unused as of yet.)
This commit was sponsored by Jochen Bartl on Patreon.
I think this could cause unnecessary changes to the git-annex branch,
and retrieveExportWithContentIdentifier is now also used for getting
content from importtree=yes remotes, so it would happen more frequently
so let's avoid.
Lots of nice wins from this in avoiding unncessary work, and I think
nothing got slower.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Potentially fixes https://git-annex.branchable.com/bugs/concurrent_git-annex-copy_to_s3_special_remote_fails/
although I don't know if it does.
My thinking is, ResourceT may allocate a resource and then free it,
and a unforced thunk to that resource could result in reading memory
that has since been overwritten by something else, or in a SEGV,
depending. While that seems kind of like a bug in ResourceT to me, if it
is what's happening, this will avoid it. If it's not, this doesn't
really hurt much since the values are all smallish.
This commit was sponsored by Graham Spencer on Patreon.
Made several special remotes support locking content on them while
dropping, which allows dropping from another special remote when the
content will only remain on a special remote of these types.
In both cases, verify the content is present actively, because it's
certianly possible for things other than git-annex to have removed it.
Worth thinking about what to do if at some later point, git-lfs gains
support for dropping content, and a content locking operation.
That would probably need a transition; first would need to make lockContent
use the locking operation. Then, once enough time had passed that we can
assume any git-annex operating on the git-lfs remote had that change,
git-annex could finally allow dropping from git-lfs.
Or, it could be that git-lfs gains support for dropping content, but not
locking it. In that case, it seems this commit would need to be reverted,
and then wait long enough for that git-annex to be everywhere, and only
then can git-annex safely support dropping from git-lfs.
So, the assumption made in this commit could lead to bother later.. But I
think it's actually highly unlikely git-lfs does ever support dropping;
it's outside their centralized model. Probably. :) Worth keeping in mind as
the same assumption is made about other special remotes though.
This commit was sponsored by Ethan Aubin.
Fix bug that made creds not be stored in git when a special remote was
initialized with gpg encryption, but without an explicit embedcreds=yes.
(Yet nother regression introduced in version 7.20200202.7. 5th so far.)
So stop documenting it, and stop offering it as a choice in the assistant.
Removed the code that parses it into S3.ReducedRedundancy, because
S3.OtherStorageClass with the value will work just the same and avoids a
special case for a deprecated this.
Fix bug that made enableremote of S3 and webdav remotes, that have
embedcreds=yes, fail to set up the embedded creds, so accessing the remotes
failed.
(Regression introduced in version 7.20200202.7 in when reworking all the
remote configs to be parsed.)
Root problem is that parseEncryptionConfig excludes all other config keys
except encryption ones, so it is then unable to find the
credPairRemoteField. And since that field is not required to be
present, it proceeds as if it's not, rather than failing in any visible
way.
This causes it to not find any creds, and so it does not cache
them. When when the S3 remote tries to make a S3 connection, it finds no
creds, so assumes it's being used in no-creds mode, and tries to find a
public url. With no public url available, it fails, but the failure doesn't
say a lack of creds is the problem.
Fix is to provide setRemoteCredPair with a ParsedRemoteConfig, so the full
set of configs of the remote can be parsed. A bit annoying to need to
parse the remote config before the full config (as returned by
setRemoteCredPair) is available, but this avoids the problem.
I assume webdav also had the problem by inspection, but didn't try to
reproduce it with it.
Also, getRemoteCredPair used getRemoteConfigValue to get a ProposedAccepted
String, but that does not seem right. Now that it runs that code, it
crashed saying it had just a String.
Remotes that have already been enableremoted, and so lack the cached creds
file will work after this fix, because getRemoteCredPair will extract
the creds from the remote config, writing the missing file.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Finishes the transition to make remote methods throw exceptions, rather
than silently hide them.
A bit on the fence about this one, because when renameExport fails,
it falls back to deleting instead, and so does the user care why it failed?
However, it did let me clean up several places in the code.
This commit was sponsored by Ethan Aubin.
Part of ongoing transition to make remote methods
throw exceptions, rather than silently hide them.
This commit was sponsored by Graham Spencer on Patreon.
retrieveExport is part of ongoing transition to make remote methods
throw exceptions, rather than silently hide them.
getKey very rarely fails, and when it does it's always for the same reason
(user configured annex.backend to url for some reason). So, this will
avoid dealing with Nothing everywhere it's used.
This commit was sponsored by Ilya Shlyakhter on Patreon.
