It will then proceed to add the file the same as if it were any other
file containing possibly annexable content. Usually the file is one that
was annexed before, so the new, probably corrupt content will also be added
to the annex. If the file was not annexed before, the content will be added
to git.
It's not possible for the smudge filter to throw an error here, because
git then just adds the file to git anyway.
Sponsored-by: Dartmouth College's Datalad project
This format is designed to detect accidental appends, while having some
room for future expansion.
Detect when an unlocked file whose content is not present has gotten some
other content appended to it, and avoid treating it as a pointer file, so
that appended content will not be checked into git, but will be annexed
like any other file.
Dropped the max size of a pointer file down to 32kb, it was around 80 kb,
but without any good reason and certianly there are no valid pointer files
anywhere that are larger than 8kb, because it's just been specified what it
means for a pointer file with additional data even looks like.
I assume 32kb will be good enough for anyone. ;-) Really though, it needs
to be some smallish number, because that much of a file in git gets read
into memory when eg, catting pointer files. And since we have no use cases
for the extra lines of a pointer file yet, except possibly to add
some human-visible explanation that it is a git-annex pointer file, 32k
seems as reasonable an arbitrary number as anything. Increasing it would be
possible, eg to 64k, as long as users of such jumbo pointer files didn't
mind upgrading all their git-annex installations to one that supports the
new larger size.
Sponsored-by: Dartmouth College's Datalad project
A few places were reading the max symlink size of a pointer file,
then passing tp parseLinkTargetOrPointer. Which is fine currently, but
to support pointer files with lines of data after the pointer, enough
has to be read that parseLinkTargetOrPointer can be assured of seeing
enough of that data to know if it's correctly formatted.
Sponsored-by: Dartmouth College's Datalad project
Only one place remained that differentiated between them.
It is the case that a symlink target that happens to contain a newline
somehow will be treated as a link to a key truncated at the newline.
This is super unlikely to happen, and since a key cannot actually
contain a newline, it's as good a behavior as any. Anyway, this commit
does not change the behavior there, although arguably it should be
changed. Note that getAnnexLinkTarget does prevent a symlink target
containing a newline.
Sponsored-by: Dartmouth College's Datalad project
Implemented by making Git.Queue have a FlushAction, which can accumulate
along with another action on files, and runs only once the other action has
run.
This lets git-annex unlock queue up git update-index actions, without
conflicting with the restagePointerFiles FlushActions.
In a repository with filter-process enabled, git-annex unlock will
often not take any more time than before, though it may when the files are
large. Either way, it should always slow down less than git-annex status
speeds up.
When filter-process is not enabled, git-annex unlock will slow down as much
as git status speeds up.
Sponsored-by: Jochen Bartl on Patreon
Based on my earlier benchmark, I have a rough cost model for how
expensive it is for git-annex smudge to be run on a file, vs
how expensive it is for a gigabyte of a file's content to be read and
piped through to filter-process.
So, using that cost model, it can decide if using filter-process will
be more or less expensive than running the smudge filter on the files to
be restaged.
It turned out to be *really* annoying to temporarily disable
filter-process. I did find a way, but urk, this is horrible. Notice
that, if it's interrupted with it disabled, it will remain disabled
until the next time restagePointerFile runs. Which could be some time
later. If the user runs `git add` or `git checkout` on a lot of small
files before that, they will see slower than expected performance.
(This commit also deletes where I wrote down the benchmark results
earlier.)
Sponsored-by: Noam Kremen on Patreon
This reverts commit afe327ac49.
Unfortunately, disabling it by setting it to "" does not work, git
then ignores filter.annex.smudge/clean, and does not pass files through
git-annex at all.
I don't think there is a way to temporarily disable this git config
from the git command line. Which seems like a bug in git.
So, it may be more expensive than anticipated to enable
filter.annex.process, since git checkout etc will pipe all annexed files
being checked out through it.
This means git will run git-annex smudge --clean once per file that is
restaged, which can be slow. But probably *not* as slow as git feeding
all the content of annexed files you've gotten through a pipe to
git-annex filter-process.
The only time this is probably not ideal is after a drop of a bunch of
files, when filter-process would be faster.
That seems very unlikely to happen, but still, it's possible it could.
And with the recent addition of locked files to the keys db, this could
be called by places that did not call it before, so it seems even more
important it's correct.
Adds an extra stat of the file, and is potentially racy, but both
problems are fixed by the unix-2.8.0 path. I have not tested that path
builds because that package is not yet released and it would be difficult
to install it since it's tightly tied to a ghc version.
Values in AnnexRead can be read more efficiently, without MVar overhead.
Only a few things have been moved into there, and the performance
increase so far is not likely to be noticable.
This is groundwork for putting more stuff in there, particularly a value
that indicates if debugging is enabled.
The obvious next step is to change option parsing to not run in the
Annex monad to set values in AnnexState, and instead return a pure value
that gets stored in AnnexRead.
This avoids the smudge --clean filter failing on the URL keys.
git checkout runs the post-checkout hook, which runs smudge --update.
That populates all the pointer files, but it neglected to store their inode
caches in the keys db. With that done, and the keys db flushed before
smudge --clean gets run (by restagePointerFile), the isUnmodifiedCheap
check can tell the file is not modified, so will not try to re-ingest it,
which does not work with URL keys because they do not support genKey.
It also seems possible that the isUnmodifiedCheap was also failing for
non-URL keys, which would cause them to be re-ingested, leading to a lot of
extra work. I have not verified that, but don't see why it wouldn't have
happened. So this probably also speeds up checking out adjusted branches.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
removeFile changed to removeLink, because AFAICS it should be fine to
remove non-file things here. In particular, it's fine to remove a
symlink, since we're about to write a symlink. (removeLink does not
remove directories, so file, symlink, and unix socket are the only
possibilities.)
Fixes reversion in 8.20200617 that made annex.pidlock being enabled result
in some commands stalling, particularly those needing to autoinit.
Renamed runsGitAnnexChildProcess to make clearer where it should be
used.
Arguably, it would be better to have a way to make any process git-annex
runs have the env var set. But then it would need to take the pid lock
when running any and all processes, and that would be a problem when
git-annex runs two processes concurrently. So, I'm left doing it ad-hoc
in places where git-annex really does run a child process, directly
or indirectly via a particular git command.
Fix a deadlock that could occur after git-annex got an unlocked file,
causing the command to hang indefinitely.
Known to happen on vfat filesystems, possibly others.
Note that a deadlock is still theoretically possible, if anything
smudge --clean does causes it to run the git queue for some other
reason.
Apparently that doesn't happen, but will need to keep an eye on it.
That made eg git-annex get of an unlocked file hang until the
annex.pidlocktimeout and then fail.
This fix should be fully thread safe no matter what else git-annex is
doing.
Only using runsGitAnnexChildProcess in the one place it's known to be a
problem. Could audit for all places where git-annex runs itself as a child
and add it to all of them, later.
Remove dup definitions and just use the RawFilePath one. </> etc are
enough faster that it's probably faster than building a String directly,
although I have not benchmarked.
git-annex find is now RawFilePath end to end, no string conversions.
So is git-annex get when it does not need to get anything.
So this is a major milestone on optimisation.
Benchmarks indicate around 30% speedup in both commands.
Probably many other performance improvements. All or nearly all places
where a file is statted use RawFilePath now.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
Only done on those calls to getFileStatus that had a RawFilePath, not a
FilePath. The others would probably be just as fast if converted to use
it with toRawFilePath, but I'm not 100% sure.
Note that genInodeCache' uses fromRawFilePath, but that value only gets
used on Windows, so on unix the thunk will never be evaluated.
Finally builds (oh the agoncy of making it build), but still very
unmergable, only Command.Find is included and lots of stuff is badly
hacked to make it compile.
Benchmarking vs master, this git-annex find is significantly faster!
Specifically:
num files old new speedup
48500 4.77 3.73 28%
12500 1.36 1.02 66%
20 0.075 0.074 0% (so startup time is unchanged)
That's without really finishing the optimization. Things still to do:
* Eliminate all the fromRawFilePath, toRawFilePath, encodeBS,
decodeBS conversions.
* Use versions of IO actions like getFileStatus that take a RawFilePath.
* Eliminate some Data.ByteString.Lazy.toStrict, which is a slow copy.
* Use ByteString for parsing git config to speed up startup.
It's likely several of those will speed up git-annex find further.
And other commands will certianly benefit even more.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
Now there's a ByteString used all the way from disk to Key.
The main complication in this conversion was the use of fromInternalGitPath
in several places to munge things on Windows. The things that used that
were changed to parse the ByteString using either path separator.
Also some code that had read from files to a String lazily was changed
to read a minimal strict ByteString.
Test suite found a case where this is necessary.
And the man page says this, although current behavior is not as
documented..
Note that files beginning with . are discarded.
This includes ./file and dir/./file. If you don’t want
this, then use cleaner names.
This may hit path length limits on Windows. shrug
This commit was supported by the NSF-funded DataLad project.
Check just before running update-index if the worktree file's content is
still the same, don't update it when it's been modified. This narrows
the race window a lot, from possibly minutes or hours, to seconds or
less.
(Use replaceFile so that the worktree update happens atomically,
allowing the InodeCache of the new worktree file to itself be gathered
w/o any other race.)
This doesn't eliminate the race; it can still occur in the window before
update-index runs. When annex.queue is large, a lot of files will be
statted by the checks, and so the window may still be large enough to be a
problem.
When only a few files are being processed, the window is as small as it
is in the race where a modification gets overwritten by git-annex when
it updates the worktree. Or maybe as small as whatever race git
checkout/pull/merge may have when the worktree gets modified during it.
Still, I've kept a todo about this race.
This commit was supported by the NSF-funded DataLad project.
Use git update-index --refresh, since it's a little bit more
efficient and the user can be told to run it if a locked index prevents
git-annex from running it.
This also fixes the problem where an annexed file was deleted in the index
and a get of another file that uses the same key caused the index update to
add back the deleted file. update-index will not add back the deleted file.
Documented in tips/unlocked_files.mdwn the gotcha that the index update
may conflict with other operations. I can't see any way to possibly avoid
that conflict.
One new todo about a race that causes a modification to be accidentially
staged.
Note that the assistant only flushes the git command queue when it
commits a modification. I have not tested the assistant with v6 unlocked
files, but assume most users of the assistant won't care if the index
shows a file as modified for a while.
This commit was supported by the NSF-funded DataLad project.
This was badly named, it's a not a blob necessarily, but anything that a
tree can refer to.
Also removed the Show instance which was used for serialization to git
format, instead use fmtTreeItemType.
This commit was supported by the NSF-funded DataLad project.
.. and have to be checked to see if they are a pointed to an annexed file.
Cases where such memory use could occur included, but were not limited to:
- git commit -a of a large unlocked file (in v5 mode)
- git-annex adjust when a large file was checked into git directly
Generally, any use of catKey was a potential problem.
Fix by using git cat-file --batch-check to check size before catting.
This adds another git batch process, which is included in the CatFileHandle
for simplicity.
There could be performance impact, anywhere catKey is used. Particularly
likely to affect adjusted branch generation speed, and operations on
unlocked files in v6 mode. Hopefully since the --batch-check and
--batch read the same data, disk buffering will avoid most overhead.
Leaving only the overhead of talking to the process over the pipe and
whatever computation --batch-check needs to do.
This commit was sponsored by Bruno BEAUFILS on Patreon.
When annex.thin is set, adding an object will add the execute bits to the
work tree file, and this does mean that the annex object file ends up
executable.
This doesn't add any complexity that wasn't already present, because git
annex add of an executable file has always ingested it so that the annex
object ends up executable.
But, since an annex object file can be executable or not, when populating
an unlocked file from one, the executable bit is always added or removed
to match the mode of the pointer file.
Was using L.readFile, so the Handle would remain open until the garbage
collector got around to it. Changed to explicit open and close, so we know
it's always closed when the function returns.
An unlocked present file does not have a pointer file in the worktree, so
info skipped counting it.
It may be that unused was also affected by the problem, but it seemed not
to be in my tests. I think because of the use of the associatedFilesFilter.
This fix slows down both info and unused a little bit, since they have to
query the contents of files from git, but only when handling unlocked files.
The problem with having the slashes unescaped is, it broke parsing, since
the parser takes the filename to get the part containing the key.
That particularly affected URL keys.
This makes the format be the same as symlinks point to, which keeps things
simple.
Existing pointer files will continue to work ok.
