When importing from versioned remotes, fix tracking of the content of
deleted files.
Only S3 supports versioning so far, so only it was affected.
But, the draft import/export interface for external remotes also seemed to
need a change, so that versionedExport could be set.
It's hard to know what's a good default for this. But 1 mb seems way too
small, because it's very easy for a git pull or some similar operation
that we don't think of as using much space to use up 1 mb of space.
Most people would want to free up some space if a filesystem only had 100
mb free. But on a small VPS, it's probably not uncommon to have only 1 gb
free. So 1 gb is too large for annex.diskreserve.
While old 1 gb USB keys are around, it's unlikely that anyone is
relying on them to shuttle annex data around; it would be worth anyone's
time to upgrade to a 32 gb or larger cheap modern USB key ($5).
Sponsored-by: Kevin Mueller on Patreon
This partly fixes an issue where there are duplicate files in the
special remote, and the first file gets swapped with another duplicate,
or deleted. The swap case is fixed by this, the deleted case will need
other changes.
This makes retrieveExportWithContentIdentifier take a list of allowed
ContentIdentifier, same as storeExportWithContentIdentifier,
removeExportWithContentIdentifier, and
checkPresentExportWithContentIdentifier.
Of the special remotes that support importtree, borg is a special case
and does not use content identifiers, S3 I assume can't get mixed up
like this, directory certainly has the problem, and adb also appears to
have had the problem.
Sponsored-by: Graham Spencer on Patreon
This allows annex.dbdir to be set globally or always set to the same
value when needed. Each repository uses a subdirectory of it.
Sponsored-by: Dartmouth College's Datalad project
WIP: This is mostly complete, but there is a problem: createDirectoryUnder
throws an error when annex.dbdir is set to outside the git repo.
annex.dbdir is a workaround for filesystems where sqlite does not work,
due to eg, the filesystem not properly supporting locking.
It's intended to be set before initializing the repository. Changing it
in an existing repository can be done, but would be the same as making a
new repository and moving all the annexed objects into it. While the
databases get recreated from the git-annex branch in that situation, any
information that is in the databases but not stored in the branch gets
lost. It may be that no information ever gets stored in the databases
that cannot be reconstructed from the branch, but I have not verified
that.
Sponsored-by: Dartmouth College's Datalad project
This is intended for users who want to see what it would output in order to
eg, check if a file would be added to git or the annex. It is not intended
as a way for scripts to get information.
Sponsored-by: Dartmouth College's Datalad project
Added annex.alwayscompact setting which can be unset to speed up writes to
the git-annex branch in some cases.
Sponsored-by: Dartmouth College's DANDI project
--backend is no longer a global option, and is only accepted by commands
that actually need it.
Three commands that used to support backend but don't any longer are
watch, webapp, and assistant. It would be possible to make them support it,
but I doubt anyone used the option with these. And in the case of webapp
and assistant, the option was handled inconsistently, only taking affect
when the command is run with an existing git-annex repo, not when it
creates a new one.
Also, renamed GlobalOption etc to AnnexOption. Because there are many
options of this type that are not actually global (any more) and get
added to commands that need them.
Sponsored-by: Kevin Mueller on Patreon
None of the special remotes do it yet, but this lays the groundwork.
Added MustFinishIncompleteVerify so that, when an incremental verify is
started but not complete, it can be forced to finish it. Otherwise, it
would have skipped doing it when verification is disabled, but
verification must always be done when retrievin from export remotes
since files can be modified during retrieval.
Note that retrieveExportWithContentIdentifier doesn't support incremental
verification yet. And I'm not sure if it can -- it doesn't know the Key
before it downloads the content. It seems a new API call would need to
be split out of that, which is provided with the key.
Sponsored-by: Dartmouth College's Datalad project
Ignore annex.numcopies set to 0 in gitattributes or git config, or by
git-annex numcopies or by --numcopies, since that configuration would make
git-annex easily lose data. Same for mincopies.
This is a continuation of the work to make data only be able to be lost
when --force is used. It earlier led to the --trust option being disabled,
and similar reasoning applies here.
Most numcopies configs had docs that strongly discouraged setting it to 0
anyway. And I can't imagine a use case for setting to 0. Not that there
might not be one, but it's just so far from the intended use case of
git-annex, of managing and storing your data, that it does not seem like
it makes sense to cater to such a hypothetical use case, where any
git-annex drop can lose your data at any time.
Using a smart constructor makes sure every place avoids 0. Note that this
does mean that NumCopies is for the configured desired values, and not the
actual existing number of copies, which of course can be 0. The name
configuredNumCopies is used to make that clear.
Sponsored-by: Brock Spratlen on Patreon
Default to the number of CPU cores, which seems about optimal
on my laptop. Using one more saves me 2 seconds actually.
Better packing of workers improves speed significantly.
In 2 tests runs, I saw segfaulting workers despite my attempt
to work around that issue. So detect when a worker does, and re-run it.
Removed installSignalHandlers again, because I was seeing an
error "lost signal due to full pipe", which I guess was somehow caused
by using it.
Sponsored-by: Dartmouth College's Datalad project
In aeson 2.0, Text has been replaced by the Key type and HashMap by the
KeyMap interface. Accomodating this required adding some CPP in order to
still be able to compile with aeson < 2.0. The required changes were:
* Prevent Key from being re-exported by Utilities.Aeson, as it clashes
with git-annex's own Key type.
* Fix up convertion from String/Text to Key (or Text in aeson 1.*) in a
couple of places
* Import Data.Aeson.KeyMap instead of Data.HashMap.Strict, as they are
mostly API-compatible. insertWith needs to be replaced by unionWith,
however, as KeyMap lacks the former function.
annex.skipunknown now defaults to false, so commands like `git annex get foo*`
will not silently skip over files/dirs that are not checked into git.
Sponsored-by: Brock Spratlen on Patreon
v10 will run 1 year after the upgrade to v9, to give time for any v8
processes to die. Until that point, the v10 upgrade will be tried by
every process but deferred, so added support for deferring upgrades.
The upgrade prevention lock file that will be used by v10 is not yet
implemented, so it does not yet defer.
Sponsored-by: Dartmouth College's Datalad project
Capstone to this feature. Any transitions that have been performed on an
unmerged remote ref but not on the local git-annex branch, or vice-versa
have to be applied on the fly when reading files.
Sponsored-by: Dartmouth College's Datalad project
Improved support for using git-annex in a read-only repository, git-annex
branch information from remotes that cannot be merged into the git-annex
branch will now not crash it, but will be merged in memory.
To avoid this making git-annex behave one way in a read-only repository,
and another way when it can write, it's important that Annex.Branch.get
return the same thing (modulo log file compaction) in both cases.
This manages that mostly. There are some exceptions:
- When there is a transition in one of the remote git-annex branches
that has not yet been applied to the local or other git-annex branches.
Transitions are not handled.
- `git-annex log` runs git log on the git-annex branch, and so
it will not be able to show information coming from the other, not yet
merged branches.
- Annex.Branch.files only looks at files in the git-annex branch and not
unmerged branches. This affects git-annex info output.
- Annex.Branch.hs.overBranchFileContents ditto. Affects --all and
also importfeed (but importfeed cannot work in a read-only repo
anyway).
- CmdLine.Seek.seekFilteredKeys when precaching location logs.
Note use of Annex.Branch.fullname
- Database.ContentIdentifier.needsUpdateFromLog and updateFromLog
These warts make this not suitable to be merged yet.
This readonly code path is more expensive, since it has to query several
branches. The value does get cached, but still large queries will be
slower in a read-only repository when there are unmerged git-annex
branches.
When annex.merge-annex-branches=false, updateTo skips doing anything,
and so the read-only repository code does not get triggered. So a user who
is bothered by the extra work can set that.
Other writes to the repository can still result in permissions errors.
This includes the initial creation of the git-annex branch, and of course
any writes to the git-annex branch.
Sponsored-by: Dartmouth College's Datalad project
When non-concurrent git coprocesses have been started, setConcurrency
used to not stop them, and so could leak processes when enabling
concurrency, eg when forkState is called.
I do not think that ever actually happened, given where setConcurrency
is called. And it probably would only leak one of each process, since it
never downgrades from concurrent to non-concurrent.
This improves the borg special remote memory usage, by
letting it only load one archive's worth of filenames into memory at a
time, and building up a larger tree out of the chunks.
When a borg repository has many archives, git-annex could easily OOM
before. Now, it will use only memory proportional to the number of
annexed keys in an archive.
Minor implementation wart: Each new chunk re-opens the content
identifier database, and also a new vector clock is used for each chunk.
This is a minor innefficiency only; the use of continuations makes
it hard to avoid, although putting the database handle into a Reader
monad would be one way to fix it.
It may later be possible to extend the ImportableContentsChunkable
interface to remotes that are not third-party populated. However, that
would perhaps need an interface that does not use continuations.
The ImportableContentsChunkable interface currently does not allow
populating the top of the tree with anything other than subtrees. It
would be easy to extend it to allow putting files in that tree, but borg
doesn't need that so I left it out for now.
Sponsored-by: Noam Kremen on Patreon
This adds the overhead of a copy when serializing and deserializing keys.
I have not benchmarked much, but runtimes seem barely changed at all by that.
When a lot of keys are in memory, it improves memory use.
And, it prevents keys sometimes getting PINNED in memory and failing to GC,
which is a problem ByteString has sometimes. In particular, git-annex sync
from a borg special remote had that problem and this improved its memory
use by a large amount.
Sponsored-by: Shae Erisson on Patreon
This adds the overhead of a copy whenever converting to/from ExportLocation and
ImportLocation.
borg: Some improvements to memory use when importing a lot of archives.
(It's still pretty bad.)
Sponsored-by: Mark Reidenbach on Patreon
This avoids starting one process when only the other one is needed.
Eg in git-annex smudge --clean, this reduces the total number of
cat-file processes that are started from 4 to 2.
The only performance penalty is that when both are needed, it has to do
twice as much work to maintain the two Maps. But both are very small,
consisting of 1 or 2 items, so that work is negligible.
Sponsored-by: Dartmouth College's Datalad project
New method is much better. Avoids unrestrained transfer at the beginning
(except for the first block. Keeps right at or a few kb/s below the
configured limit, with very little varation in the actual reported bandwidth.
Removed the /s part of the config as it's not needed.
Ready to merge.
Sponsored-by: Luke Shumaker on Patreon
RemoteGitConfig parsing looks for annex.bwlimit when a remote
does not have a per-remote config for it, so no need for a separate
gobal config.
Sponsored-by: Svenne Krap on Patreon
RemoteGitConfig parsing looks for annex.stalldetection when a remote
does not have a per-remote config for it, so no need for a separate
gobal config.
Sponsored-by: Noam Kremen on Patreon
Bug fix: Git configs such as annex.verify were incorrectly overriding
per-remote git configs such as remote.name.annex-verify.
This dates all the way back to 2013,
commit 8a5b397ac4,
where hlint apparently somehow confused me into parsing in the wrong
order. Before that it was correct.
Amazing noone has noticed until now.
Sponsored-by: Kevin Mueller on Patreon
Added annex.bwlimit and remote.name.annex-bwlimit config that works for git
remotes and many but not all special remotes.
This nearly works, at least for a git remote on the same disk. With it set
to 100kb/1s, the meter displays an actual bandwidth of 128 kb/s, with
occasional spikes to 160 kb/s. So it needs to delay just a bit longer...
I'm unsure why.
However, at the beginning a lot of data flows before it determines the
right bandwidth limit. A granularity of less than 1s would probably improve
that.
And, I don't know yet if it makes sense to have it be 100ks/1s rather than
100kb/s. Is there a situation where the user would want a larger
granularity? Does granulatity need to be configurable at all? I only used that
format for the config really in order to reuse an existing parser.
This can't support for external special remotes, or for ones that
themselves shell out to an external command. (Well, it could, but it
would involve pausing and resuming the child process tree, which seems
very hard to implement and very strange besides.) There could also be some
built-in special remotes that it still doesn't work for, due to them not
having a progress meter whose displays blocks the bandwidth using thread.
But I don't think there are actually any that run a separate thread for
downloads than the thread that displays the progress meter.
Sponsored-by: Graham Spencer on Patreon
IncrementalVerifier moved to Utility.Hash, which will let Utility.Url
use it later.
It's perhaps not really specific to hashing, but making a separate
module just for the data type seemed unncessary.
Sponsored-by: Dartmouth College's DANDI project
This fixes the recent reversion that annex.verify is not honored,
because retrieveChunks was passed RemoteVerify baser, but baser
did not have export/import set up.
Sponsored-by: Dartmouth College's DANDI project
Now it's run in VerifyStage.
I thought about keeping the file handle open, and resuming reading where
tailVerify left off. But that risks leaking open file handles, until the
GC closes them, if the deferred verification does not get resumed. Since
that could perhaps happen if there's an exception somewhere, I decided
that was too unsafe.
Instead, re-open the file, seek, and resume.
Sponsored-by: Dartmouth College's DANDI project
It uses tailVerify to hash the file while it's being written.
This is able to sometimes avoid a separate checksum step. Although
if the file gets written quickly enough, tailVerify may not see it
get created before the write finishes, and the checksum still happens.
Testing with the directory special remote, incremental checksumming did
not happen. But then I disabled the copy CoW probing, and it did work.
What's going on with that is the CoW probe creates an empty file on
failure, then deletes it, and then the file is created again. tailVerify
will open the first, empty file, and so fails to read the content that
gets written to the file that replaces it.
The directory special remote really ought to be able to avoid needing to
use tailVerify, and while other special remotes could do things that
cause similar problems, they probably don't. And if they do, it just
means the checksum doesn't get done incrementally.
Sponsored-by: Dartmouth College's DANDI project
Several special remotes verify content while it is being retrieved,
avoiding a separate checksum pass. They are: S3, bup, ddar, and
gcrypt (with a local repository).
Not done when using chunking, yet.
Complicated by Retriever needing to change to be polymorphic. Which in turn
meant RankNTypes is needed, and also needed some code changes. The
change in Remote.External does not change behavior at all but avoids
the type checking failing because of a "rigid, skolem type" which
"would escape its scope". So I refactored slightly to make the type
checker's job easier there.
Unfortunately, directory uses fileRetriever (except when chunked),
so it is not amoung the improved ones. Fixing that would need a way for
FileRetriever to return a Verification. But, since the file retrieved
may be encrypted or chunked, it would be extra work to always
incrementally checksum the file while retrieving it. Hm.
Some other special remotes use fileRetriever, and so don't get incremental
verification, but could be converted to byteRetriever later. One is
GitLFS, which uses downloadConduit, which writes to the file, so could
verify as it goes. Other special remotes like web could too, but don't
use Remote.Helper.Special and so will need to be addressed separately.
Sponsored-by: Dartmouth College's DANDI project
This eliminates the distinction between decodeBS and decodeBS', encodeBS
and encodeBS', etc. The old implementation truncated at NUL, and the
primed versions had to do extra work to avoid that problem. The new
implementation does not truncate at NUL, and is also a lot faster.
(Benchmarked at 2x faster for decodeBS and 3x for encodeBS; more for the
primed versions.)
Note that filepath-bytestring 1.4.2.1.8 contains the same optimisation,
and upgrading to it will speed up to/fromRawFilePath.
AFAIK, nothing relied on the old behavior of truncating at NUL. Some
code used the faster versions in places where I was sure there would not
be a NUL. So this change is unlikely to break anything.
Also, moved s2w8 and w82s out of the module, as they do not involve
filesystem encoding really.
Sponsored-by: Shae Erisson on Patreon
* Deal with clock skew, both forwards and backwards, when logging
information to the git-annex branch.
* GIT_ANNEX_VECTOR_CLOCK can now be set to a fixed value (eg 1)
rather than needing to be advanced each time a new change is made.
* Misuse of GIT_ANNEX_VECTOR_CLOCK will no longer confuse git-annex.
When changing a file in the git-annex branch, the vector clock to use is now
determined by first looking at the current time (or GIT_ANNEX_VECTOR_CLOCK
when set), and comparing it to the newest vector clock already in use in
that file. If a newer time stamp was already in use, advance it forward by
a second instead.
When the clock is set to a time in the past, this avoids logging with
an old timestamp, which would risk that log line later being ignored in favor
of "newer" line that is really not newer.
When a log entry has been made with a clock that was set far ahead in the
future, this avoids newer information being logged with an older timestamp
and so being ignored in favor of that future-timestamped information.
Once all clocks get fixed, this will result in the vector clocks being
incremented, until finally enough time has passed that time gets back ahead
of the vector clock value, and then it will return to usual operation.
(This latter situation is not ideal, but it seems the best that can be done.
The issue with it is, since all writers will be incrementing the last
vector clock they saw, there's no way to tell when one writer made a write
significantly later in time than another, so the earlier write might
arbitrarily be picked when merging. This problem is why git-annex uses
timestamps in the first place, rather than pure vector clocks.)
Advancing forward by 1 second is somewhat arbitrary. setDead
advances a timestamp by just 1 picosecond, and the vector clock could
too. But then it would interfere with setDead, which wants to be
overrulled by any change. So it could use 2 picoseconds or something,
but that seems weird. It could just as well advance it forward by a
minute or whatever, but then it would be harder for real time to catch
up with the vector clock when forward clock slew had happened.
A complication is that many log files contain several different peices of
information, and it may be best to only use vector clocks for the same peice
of information. For example, a key's location log file contains
InfoPresent/InfoMissing for each UUID, and it only looks at the vector
clocks for the UUID that is being changed, and not other UUIDs.
Although exactly where the dividing line is can be hard to determine.
Consider metadata logs, where a field "tag" can have multiple values set
at different times. Should it advance forward past the last tag?
Probably. What about when a different field is set, should it look at
the clocks of other fields? Perhaps not, but currently it does, and
this does not seems like it will cause any problems.
Another one I'm not entirely sure about is the export log, which is
keyed by (fromuuid, touuid). So if multiple repos are exporting to the
same remote, different vector clocks can be used for that remote.
It looks like that's probably ok, because it does not try to determine
what order things occurred when there was an export conflict.
Sponsored-by: Jochen Bartl on Patreon
Freeze first sets the file perms, and then runs
freezecontent-command. Thaw runs thawcontent-command before
restoring file permissions. This is in case the freeze command
prevents changing file perms, as eg setting a file immutable does.
Also, changing file perms tends to mess up previously set ACLs.
git-annex init's probe for crippled filesystem uses them, so if file perms
don't work, but freezecontent-command manages to prevent write to a file,
it won't treat the filesystem as crippled.
When the the filesystem has been probed as crippled, the hooks are not
used, because there seems to be no point then; git-annex won't be relying
on locking annex objects down. Also, this avoids them being run when the
file perms have not been changed, in case they somehow rely on
git-annex's setting of the file perms in order to work.
Sponsored-by: Dartmouth College's Datalad project
Clear visible progress bar first.
Removed showSideActionAfter because it can't be used in reconcileStaged
(import loop). Instead, it counts the number of files it
processes and displays it after it's seen a sufficient to know it's
taking a while.
Sponsored-by: Dartmouth College's Datalad project
fromkey: Create an unlocked file when used in an adjusted branch where the
file should be unlocked, or when configured by annex.addunlocked.
There is some overlap with code in Annex.Ingest, however it's not quite the
same because ingesting has a temp file with the content, where here the
content, if any, is in the annex object file. So it eg, makes sense for
Annex.Ingest to copy the execute mode of the content file, but it does not make
sense for fromkey to do that.
Also changed in passing to stage the file in git directly, rather than
using git add. One consequence of that is that if the file is gitignored,
it will still get added, rather than the old behavior:
The following paths are ignored by one of your .gitignore files:
ignored
hint: Use -f if you really want to add them.
hint: Turn this message off by running
hint: "git config advice.addIgnoredFile false"
git-annex: user error (xargs ["-0","git","--git-dir=.git","--work-tree=.","--literal-pathspecs","add","--"] exited 123)
That old behavior was a surprise to me, and so I consider it a bug, and doubt
anyone would have relied on it.
Note that, when on an --hide-missing branch, it is possible to fromkey a key
that is not present (needs --force). The annex link or pointer file still gets
written in this case. It doesn't seem to make any sense not to write it,
because then fromkey would not do anything useful in this case, and this way
the file can be committed and synced to master, and the branch re-adjusted to
hide the new missing file.
This commit was sponsored by Noam Kremen on Patreon.
I had been assuming that numcopies would be a larger or at most equal to
mincopies, so no need to check both. But users get confused and use configs
that don't really make sense, so make sure to handle mincopies being larger
than numcopies.
Also add something to the mincopies man page to discourage this
misconfiguration.
This commit was sponsored by Denis Dzyubenko on Patreon.
Which has otherwise been supported since 2019, but was missing from the
list of allowed repo-global configs.
Reordered the list to match the order in the git-annex-config man page, to
make them easy to cross-compare.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
