This adds the overhead of a copy when serializing and deserializing keys.
I have not benchmarked much, but runtimes seem barely changed at all by that.
When a lot of keys are in memory, it improves memory use.
And, it prevents keys sometimes getting PINNED in memory and failing to GC,
which is a problem ByteString has sometimes. In particular, git-annex sync
from a borg special remote had that problem and this improved its memory
use by a large amount.
Sponsored-by: Shae Erisson on Patreon
commit 63d508e885 broke test_readonly.
When a local git remote is readonly, tryCopyCoW run to copy a file
from it failed at withOtherTmp.
Sponsored-by: Dartmouth College's Datalad project
RemoteGitConfig parsing looks for annex.bwlimit when a remote
does not have a per-remote config for it, so no need for a separate
gobal config.
Sponsored-by: Svenne Krap on Patreon
Probably this fixes a reversion, but I don't know what version broke it.
This does use withOtherTmp for a temp file that could be quite large.
Though albeit a reflink copy that will not actually take up any space
as long as the file it was copied from still exists. So if the copy cow
succeeds but git-annex is interrupted just before that temp file gets
renamed into the usual .git/annex/tmp/ location, there is a risk that
the other temp directory ends up cluttered with a larger temp file than
later. It will eventually be cleaned up, and the changes of this being
a problem are small, so this seems like an acceptable thing to do.
Sponsored-by: Shae Erisson on Patreon
Added annex.bwlimit and remote.name.annex-bwlimit config that works for git
remotes and many but not all special remotes.
This nearly works, at least for a git remote on the same disk. With it set
to 100kb/1s, the meter displays an actual bandwidth of 128 kb/s, with
occasional spikes to 160 kb/s. So it needs to delay just a bit longer...
I'm unsure why.
However, at the beginning a lot of data flows before it determines the
right bandwidth limit. A granularity of less than 1s would probably improve
that.
And, I don't know yet if it makes sense to have it be 100ks/1s rather than
100kb/s. Is there a situation where the user would want a larger
granularity? Does granulatity need to be configurable at all? I only used that
format for the config really in order to reuse an existing parser.
This can't support for external special remotes, or for ones that
themselves shell out to an external command. (Well, it could, but it
would involve pausing and resuming the child process tree, which seems
very hard to implement and very strange besides.) There could also be some
built-in special remotes that it still doesn't work for, due to them not
having a progress meter whose displays blocks the bandwidth using thread.
But I don't think there are actually any that run a separate thread for
downloads than the thread that displays the progress meter.
Sponsored-by: Graham Spencer on Patreon
I was not able to test the whole build because of a very strange
Prelude.chr: bad argument: 469762054
Which I assume is a problem with this version of ghc or the way I was
using stack.
The stack.yaml that builds it used this patch
diff --git a/stack.yaml b/stack.yaml
index 790bffff2..8bcbaa0ec 100644
--- a/stack.yaml
+++ b/stack.yaml
@@ -1,6 +1,6 @@
flags:
git-annex:
- production: true
+ production: false
assistant: true
pairing: true
torrentparser: true
@@ -18,13 +18,15 @@ extra-deps:
- IfElse-0.85
- aws-0.22
- bloomfilter-2.0.1.0
-- filepath-bytestring-1.4.2.1.6
-- git-lfs-1.1.0
-- http-client-restricted-0.0.3
+- filepath-bytestring-1.4.2.1.8
+- git-lfs-1.1.1
+- http-client-restricted-0.0.4
- network-multicast-0.3.2
- sandi-0.5
- torrent-10000.1.1
- bencode-0.6.1.1
+- base16-bytestring-0.1.1.7
+- base64-bytestring-1.0.0.3
explicit-setup-deps:
git-annex: true
-resolver: lts-16.27
+resolver: nightly-2021-09-07
* When downloading urls fail, explain which urls failed for which
reasons.
* web: Avoid displaying a warning when downloading one url failed
but another url later succeeded.
Some other uses of downloadUrl use urls that are effectively internal use,
and should not all be displayed to the user on failure. Eg, Remote.Git
tries different urls where content could be located depending on how the
remote repo is set up. Exposing those urls to the user would lead to wild
goose chases. So had to parameterize it to control whether it displays urls
or not.
A side effect of this change is that when there are some youtube urls
and some regular urls, it will try regular urls first, even if the
youtube urls are listed first. This seems like an improvement if
anything, but in any case there's no defined order of urls that it's
supposed to use.
Sponsored-by: Dartmouth College's Datalad project
And that should be all the special remotes supporting it on linux now,
except for in the odd edge case here and there.
Sponsored-by: Dartmouth College's DANDI project
Except when configuration makes curl be used. It did not seem worth
trying to tail the file when curl is downloading.
But when an interrupted download is resumed, it does not read the whole
existing file to hash it. Same reason discussed in
commit 7eb3742e4b76d1d7a487c2c53bf25cda4ee5df43; that could take a long
time with no progress being displayed. And also there's an open http
request, which needs to be consumed; taking a long time to hash the file
might cause it to time out.
Also in passing implemented it for git and external special remotes when
downloading from the web. Several others like S3 are within striking
distance now as well.
Sponsored-by: Dartmouth College's DANDI project
IncrementalVerifier moved to Utility.Hash, which will let Utility.Url
use it later.
It's perhaps not really specific to hashing, but making a separate
module just for the data type seemed unncessary.
Sponsored-by: Dartmouth College's DANDI project
This fixes the recent reversion that annex.verify is not honored,
because retrieveChunks was passed RemoteVerify baser, but baser
did not have export/import set up.
Sponsored-by: Dartmouth College's DANDI project
Added fileRetriever', which will let the remaining special remotes
eventually also support incremental verify.
Sponsored-by: Dartmouth College's DANDI project
Now it's run in VerifyStage.
I thought about keeping the file handle open, and resuming reading where
tailVerify left off. But that risks leaking open file handles, until the
GC closes them, if the deferred verification does not get resumed. Since
that could perhaps happen if there's an exception somewhere, I decided
that was too unsafe.
Instead, re-open the file, seek, and resume.
Sponsored-by: Dartmouth College's DANDI project
It uses tailVerify to hash the file while it's being written.
This is able to sometimes avoid a separate checksum step. Although
if the file gets written quickly enough, tailVerify may not see it
get created before the write finishes, and the checksum still happens.
Testing with the directory special remote, incremental checksumming did
not happen. But then I disabled the copy CoW probing, and it did work.
What's going on with that is the CoW probe creates an empty file on
failure, then deletes it, and then the file is created again. tailVerify
will open the first, empty file, and so fails to read the content that
gets written to the file that replaces it.
The directory special remote really ought to be able to avoid needing to
use tailVerify, and while other special remotes could do things that
cause similar problems, they probably don't. And if they do, it just
means the checksum doesn't get done incrementally.
Sponsored-by: Dartmouth College's DANDI project
Simply feed each chunk in turn to the incremental verifier.
When resuming an interrupted retrieve, it does not do incremental
verification. That would need to read the file, up to the resume point,
and feed it to the incremental verifier. That seems easy to get wrong.
Also it would mean extra work done before the transfer can start. Which
would complicate displaying progress, and would perhaps not appear to the
user as if it was resuming from where it left off. Instead, in that
situation, return UnVerified, and let the verification be done in a
separate pass.
Granted, Annex.CopyFile does manage all that, but it's not complicated
by dealing with chunks too.
Sponsored-by: Dartmouth College's DANDI project
Several special remotes verify content while it is being retrieved,
avoiding a separate checksum pass. They are: S3, bup, ddar, and
gcrypt (with a local repository).
Not done when using chunking, yet.
Complicated by Retriever needing to change to be polymorphic. Which in turn
meant RankNTypes is needed, and also needed some code changes. The
change in Remote.External does not change behavior at all but avoids
the type checking failing because of a "rigid, skolem type" which
"would escape its scope". So I refactored slightly to make the type
checker's job easier there.
Unfortunately, directory uses fileRetriever (except when chunked),
so it is not amoung the improved ones. Fixing that would need a way for
FileRetriever to return a Verification. But, since the file retrieved
may be encrypted or chunked, it would be extra work to always
incrementally checksum the file while retrieving it. Hm.
Some other special remotes use fileRetriever, and so don't get incremental
verification, but could be converted to byteRetriever later. One is
GitLFS, which uses downloadConduit, which writes to the file, so could
verify as it goes. Other special remotes like web could too, but don't
use Remote.Helper.Special and so will need to be addressed separately.
Sponsored-by: Dartmouth College's DANDI project
This eliminates the distinction between decodeBS and decodeBS', encodeBS
and encodeBS', etc. The old implementation truncated at NUL, and the
primed versions had to do extra work to avoid that problem. The new
implementation does not truncate at NUL, and is also a lot faster.
(Benchmarked at 2x faster for decodeBS and 3x for encodeBS; more for the
primed versions.)
Note that filepath-bytestring 1.4.2.1.8 contains the same optimisation,
and upgrading to it will speed up to/fromRawFilePath.
AFAIK, nothing relied on the old behavior of truncating at NUL. Some
code used the faster versions in places where I was sure there would not
be a NUL. So this change is unlikely to break anything.
Also, moved s2w8 and w82s out of the module, as they do not involve
filesystem encoding really.
Sponsored-by: Shae Erisson on Patreon
The goal is that Database.Keys be able to use it; it can't use
Annex.Content.Presence due to an import loop.
Several other things also needed to be moved to Annex.Verify as a
conseqence.
To avoid mistakes like commit 0ccbed4f6f,
be explicit about the two variants of this.
Incidentially avoids a small amount of overhead in calling reverse.
Sponsored-by: Shae Erisson on Patreon
It was making the borgrepo path absolute.. even when it was a ssh
repository.
Made BorgRepo a newtype, to guard against accidentially treating it like a
FilePath.
Sponsored-by: Graham Spencer on Patreon
Transfers from or to a local git repo could fail without a reason being
given, if the content failed to verify, or if the object file's stat
changed while it was being copied. Now display messages in these cases.
Sponsored-by: Jack Hill on Patreon
Which could happen occasionally before when concurrency is enabled.
While not much of a problem when it did happen, better to avoid it. Also,
since it seems likely the gpg-agent sometimes fails in such a situation,
this makes it not happen when running a single git-annex command with
concurrency enabled.
This commit was sponsored by Jake Vosloo on Patreon.
This fixes fsck of a remote that uses chunking displaying
(checking remotename) (checking remotename)" for every chunk.
Also, some remotes displayed the message, and others did not, with no
consistency. It was originally displayed only when accessing remotes
that were expensive or might involve a password prompt, I think, but
nothing in the API said when to do it so it became an inconsistent mess.
Originally I thought fsck should always display it. But it only displays
in fsck --from remote, so the user knows the remote is being accessed,
so there is no reason to tell them it's accessing it over and over.
It was also possible for git-annex move to sometimes display it twice,
due to checking if content is present twice. But, the user of move
specifies --from/--to, so it does not need to display when it's
accessing the remote, as the user expects it to access the remote.
git-annex get might display it, but only if the remote also supports
hasKeyCheap, which is really only local git remotes, which didn't
display it always; and in any case nothing displayed it before hasKeyCheap,
which is checked first, so I don't think this needs to display it ever.
mirror is like move. And that's all the main places it would have been
displayed.
This commit was sponsored by Jochen Bartl on Patreon.
If it's passed a ConfigKey such as annex.version, avoid returning
an empty remote name and return Nothing instead. Also, foo.bar.baz is
not treated as a remote named "bar".
directory: When cp supports reflinks, use it when getting content from a
directory special remote.
Not yet for imports from directory though, and not for store.
Note that, when it's chunked, using cp --reflink would not speed it up, and
when reflink was not supported, would unnecessarily write the chunk to a
file before reading it back in. So, only using a fileRetriever in the
NoChunks case is necessary to keep chunking fast.
fileCopier is told not to verify, because the special remote interface
does not yet support verification in passing. AFAICS, fileCopies can
never return False when not verifying so the added giveup should never
actually happen.
Had to add to AnnexRead an indication of whether debugging is enabled.
Could have just made setupConsole not install a debug output action that
outputs, and have enableDebug be what installs that, but then in the
common case where there is no debug selector, and so all debug output is
selected, it would run the debug output action every time, which entails
an IORef access. Which would make fastDebug too slow..
This uses a DebugSelector, rather than debug levels, which will allow
for a later option like --debug-from=Process to only
see debuging about running processes.
The module name that contains the thing being debugged is used as the
DebugSelector (in most cases; does not need to be a hard and fast rule).
Debug calls were changed to add that. hslogger did not display
that first parameter to debugM, but the DebugSelector does get
displayed.
Also fastDebug will allow doing debugging in places that are used in
tight loops, with the DebugSelector coming from the Annex Reader
essentially for free. Not done yet.
Values in AnnexRead can be read more efficiently, without MVar overhead.
Only a few things have been moved into there, and the performance
increase so far is not likely to be noticable.
This is groundwork for putting more stuff in there, particularly a value
that indicates if debugging is enabled.
The obvious next step is to change option parsing to not run in the
Annex monad to set values in AnnexState, and instead return a pure value
that gets stored in AnnexRead.
Note that a key with no size field that is hard linked will
result in listImportableContents reporting a file size of 0,
rather than the actual size of the file. One result is that
the progress meter when getting the file will seem to get stuck
at 100%. Another is that the remote's preferred content expression,
if it tries to match against file size, will treat it as an empty file.
I don't see a way to improve the latter behavior, and the former behavior
is a minor enough problem.
This commit was sponsored by Jake Vosloo on Patreon.
Keys stored on the filesystem are mangled by keyFile to avoid problem
chars. So, that mangling has to be reversed when parsing files from a
borg backup back to a key.
The directory special remote also so mangles them. Some other special
remotes do not; eg S3 just serializes the key -- but S3 object names are
not limited to filesystem valid filenames anyway, so a S3 server must
not map them directly to files in any case. It seems unlikely that a
borg backup of some such special remote will get broken by this change.
This commit was sponsored by Graham Spencer on Patreon.
New error message:
Remote foo not usable by git-annex; setting annex-ignore
http://localhost/foo/config download failed: Configuration of annex.security.allowed-ip-addresses does not allow accessing address ::1
If git config parse fails, or the git config file is not available at the url,
a better error message for that is also shown.
This commit was sponsored by Mark Reidenbach on Patreon.
